Quantification of the proteins of the bacterial ribosome using QconCAT technology.

The bacterial ribosome is a complex of three strands of RNA and approximately 55 proteins. During protein synthesis, the ribosome interacts with other proteins, numbered in the hundreds, forming some stable and some transient complexes. The stoichiometries of these complexes and of partially assembled ribosomes are often unknown. We describe the development of a flexible standard for the determination of stoichiometries of ribosomal particles and complexes. A core QconCAT, an artificial protein consisting of concatenated signature peptides derived from the ribosomal proteins L2, L4, L13, S4, S7, and S8, was developed. The core QconCAT DNA construct incorporates restriction sites for the insertion of cassettes encoding signature peptides from additional proteins under study. Two cassettes encoding signature peptides from the remaining 30S and 50S ribosomal proteins were prepared, and the resulting QconCATs were expressed, digested, and analyzed by mass spectrometry. The majority of Escherichia coli ribosomal proteins are small and basic; therefore, tryptic digestion alone yields insufficient signature peptides for quantification of all of the proteins. The ribosomal QconCATs therefore rely on a dual-enzyme strategy: endoproteinase Lys-C digestion and analysis followed by trypsin digestion and further analysis. The utility of technology was demonstrated by a determination of the effect of gentamicin on the protein composition of the E. coli ribosome.

Partition and turnover of glutathione reductase from Saccharomyces cerevisiae: a proteomic approach.

Glutathione reductase (Glr1) is a low abundance protein involved in defense mechanisms against reactive oxygen species. Expressed on cytosolic ribosomes, the same gene, GLR1, uses alternative start codons to generate two forms of Glr1. Translation from the first AUG codon generates the mitochondrial form incorporating a presequence necessary for import; translation from the second AUG codon yields the cytosolic counterpart. Proteomic strategies were used to analyze the N-terminal sequences and the turnover of Saccharomyces cerevisiae Glr1. The N-terminus of cytosolic Glr1 was found normally to be N-acetylserine. When a Glr1-overproducing strain was employed, unprocessed mitochondrial Glr-1 with N-terminal acetylmethionine also accumulated in the cytosol. The processed mitochondrial Glr1 was surprisingly found to have three alternative N-termini, none of them acetylated. Mitochondrial Glr1 was turned over faster than the cytosolic form by a factor of about 2, consistent with the importance of redox homeostasis in the mitochondria. These experiments also allowed us to estimate the extent of "leaky scanning" in the synthesis of Glr1. Surprisingly, the second AUG appears to be responsible for most of the cellular Glr1. This is the first report of protein turnover measurements of a low-abundance protein distributed in different compartments of a eukaryotic cell.

CONSeQuence: prediction of reference peptides for absolute quantitative proteomics using consensus machine learning approaches.

Mass spectrometric based methods for absolute quantification of proteins, such as QconCAT, rely on internal standards of stable-isotope labeled reference peptides, or "Q-peptides," to act as surrogates. Key to the success of this and related methods for absolute protein quantification (such as AQUA) is selection of the Q-peptide. Here we describe a novel method, CONSeQuence (consensus predictor for Q-peptide sequence), based on four different machine learning approaches for Q-peptide selection. CONSeQuence demonstrates improved performance over existing methods for optimal Q-peptide selection in the absence of prior experimental information, as validated using two independent test sets derived from yeast. Furthermore, we examine the physicochemical parameters associated with good peptide surrogates, and demonstrate that in addition to charge and hydrophobicity, peptide secondary structure plays a significant role in determining peptide "detectability" in liquid chromatography-electrospray ionization experiments. We relate peptide properties to protein tertiary structure, demonstrating a counterintuitive preference for buried status for frequently detected peptides. Finally, we demonstrate the improved efficacy of the general approach by applying a predictor trained on yeast data to sets of proteotypic peptides from two additional species taken from an existing peptide identification repository.

Absolute quantification of the glycolytic pathway in yeast: deployment of a complete QconCAT approach.

The availability of label-free data derived from yeast cells (based on the summed intensity of the three strongest, isoform-specific peptides) permitted a preliminary assessment of protein abundances for glycolytic proteins. Following this analysis, we demonstrate successful application of the QconCAT technology, which uses recombinant DNA techniques to generate artificial concatamers of large numbers of internal standard peptides, to the quantification of enzymes of the glycolysis pathway in the yeast Saccharomyces cerevisiae. A QconCAT of 88 kDa (59 tryptic peptides) corresponding to 27 isoenzymes was designed and built to encode two or three analyte peptides per protein, and after stable isotope labeling of the standard in vivo, protein levels were determined by LC-MS, using ultra high performance liquid chromatography-coupled mass spectrometry. We were able to determine absolute protein concentrations between 14,000 and 10 million molecules/cell. Issues such as efficiency of extraction and completeness of proteolysis are addressed, as well as generic factors such as optimal quantotypic peptide selection and expression. In addition, the same proteins were quantified by intensity-based label-free analysis, and both sets of data were compared with other quantification methods.

Software for analysing ion mobility mass spectrometry data to improve peptide identification.

The development of ion mobility (IM) MS instruments has the capability to provide an added dimension to peptide analysis pipelines in proteomics, but, as yet, there are few software tools available for analysing such data. IM can be used to provide additional separation of parent ions or product ions following fragmentation. In this work, we have created a set of software tools that are capable of converting three dimensional IM data generated from analysis of fragment ions into a variety of formats used in proteomics. We demonstrate that IM can be used to calculate the charge state of a fragment ion, demonstrating the potential to improve peptide identification by excluding non-informative ions from a database search. We also provide preliminary evidence of structural differences between b and y ions for certain peptide sequences but not others. All software tools and data sets are made available in the public domain at http://code.google.com/p/ion-mobility-ms-tools/.

QconCAT standard for calibration of ion mobility-mass spectrometry systems.

Ion mobility-mass spectrometry (IM-MS) is a useful technique for determining information about analyte ion conformation in addition to mass/charge ratio. The physical principles that govern the mobility of an ion through a gas in the presence of a uniform electric field are well understood, enabling rotationally averaged collision cross sections (Ω) to be directly calculated from measured drift times under well-defined experimental conditions. However, such "first principle" calculations are not straightforward for Traveling Wave (T-Wave) mobility separations due to the range of factors that influence ion motion through the mobility cell. If collision cross section information is required from T-Wave mobility separations, then calibration of the instruments using known standards is essential for each set of experimental conditions. To facilitate such calibration, we have designed and generated an artificial protein based on the QconCAT technology, QCAL-IM, which upon proteolysis can be used as a universal ion mobility calibration standard. This single unique standard enables empirical calculation of peptide ion collision cross sections from the drift time on a T-Wave mobility instrument.

New applications of mass spectrometry in lipid analysis.

Mass spectrometry has emerged as a powerful tool for the analysis of all lipids. Lipidomic analysis of biological systems using various approaches is now possible with a quantitative measurement of hundreds of lipid molecular species. Although availability of reference and internal standards lags behind the field, approaches using stable isotope-labeled derivative tagging permit precise determination of specific phospholipids in an experimental series. The use of reactivity of ozone has enabled assessment of double bond positions in fatty acyl groups even when species remain in complex lipid mixtures. Rapid scanning tandem mass spectrometers are capable of quantitative analysis of hundreds of targeted lipids at high sensitivity in a single on-line chromatographic separation. Imaging mass spectrometry of lipids in tissues has opened new insights into the distribution of lipid molecular species with promising application to study pathophysiological events and diseases.

Detection of low-abundance protein phosphorylation by selective 18O labeling and mass spectrometry.

Reversible phosphorylation regulates the majority of intracellular networking and pathways. The study of this widely explored post-translational modification is usually challenged by low stoichiometric levels of modification. Many approaches have been developed to overcome this problem and to achieve rigorous characterization of protein phosphorylation. We describe a method for enhanced detection of low-abundance protein phosphorylation that uses selective introduction of (18)O label into phosphorylation sites with H(2)(18)O and mass spectrometric detection. The method was applied to introduce (18)O label into bacterially expressed Aurora A kinase phosphorylation sites and resulted in the representation of phosphorylated peptides as doublets or triplets according to the number of phosphate groups. A total of 28 phosphopeptides were observed by this method.

Charge state dependent top-down characterisation using electron transfer dissociation.

The dissociation of protein ions (5-30 kDa) as a function of charge state has been explored in order to suggest the optimal charge state range for top-down sequencing. Proteins were generated under denaturing conditions and their charge states were modified via ion/ion proton transfer reactions prior to dissociation. Electron transfer dissociation (ETD) data suggested optimal sequence coverage for charge states in the m/z range from 700 to 950 while limited sequence coverage was noted when the precursor m/z was above 1000. Sequence coverage from ETD data was found to be dependent on protein size, with smaller proteins having better sequence coverage. An observed depletion in sequence-related information was mainly attributed to limited instrument (ion trap) performance (m/z range and resolution). For a combined ETD/collision-induced dissociation (CID) approach it is difficult to propose an optimal m/z range since good sequence coverage for CID is at intermediate charge states and the optimal m/z range increases with protein size. When only one charge state can be analysed in a combined ETD/CID approach, a range around 950 m/z is suggested as a starting point. Alternatively, two charge states should be explored, each optimal for either ETD or CID. Overall, these suggestions should be useful to achieve enhanced characterisation of smaller proteins/large protein fragments (generated from denaturing solutions) in minimal analysis times.

Flagellar motility is required for the viability of the bloodstream trypanosome.

The 9 + 2 microtubule axoneme of flagella and cilia represents one of the most iconic structures built by eukaryotic cells and organisms. Both unity and diversity are present among cilia and flagella on the evolutionary as well as the developmental scale. Some cilia are motile, whereas others function as sensory organelles and can variously possess 9 + 2 and 9 + 0 axonemes and other associated structures. How such unity and diversity are reflected in molecular repertoires is unclear. The flagellated protozoan parasite Trypanosoma brucei is endemic in sub-Saharan Africa, causing devastating disease in humans and other animals. There is little hope of a vaccine for African sleeping sickness and a desperate need for modern drug therapies. Here we present a detailed proteomic analysis of the trypanosome flagellum. RNA interference (RNAi)-based interrogation of this proteome provides functional insights into human ciliary diseases and establishes that flagellar function is essential to the bloodstream-form trypanosome. We show that RNAi-mediated ablation of various proteins identified in the trypanosome flagellar proteome leads to a rapid and marked failure of cytokinesis in bloodstream-form (but not procyclic insect-form) trypanosomes, suggesting that impairment of flagellar function may provide a method of disease control. A postgenomic meta-analysis, comparing the evolutionarily ancient trypanosome with other eukaryotes including humans, identifies numerous trypanosome-specific flagellar proteins, suggesting new avenues for selective intervention.

Global absolute quantification of a proteome: Challenges in the deployment of a QconCAT strategy.

In this paper, we discuss the challenge of large-scale quantification of a proteome, referring to our programme that aims to define the absolute quantity, in copies per cell, of at least 4000 proteins in the yeast Saccharomyces cerevisiae. We have based our strategy on the well-established method of stable isotope dilution, generating isotopically labelled peptides using QconCAT technology, in which artificial genes, encoding concatenations of tryptic fragments as surrogate quantification standards, are designed, synthesised de novo and expressed in bacteria using stable isotopically enriched media. A known quantity of QconCAT is then co-digested with analyte proteins and the heavy:light isotopologues are analysed by mass spectrometry to yield absolute quantification. This workflow brings issues of optimal selection of quantotypic peptides, their assembly into QconCATs, expression, purification and deployment.

Identification of a lacosamide binding protein using an affinity bait and chemical reporter strategy: 14-3-3 ζ.

We have advanced a useful strategy to elucidate binding partners of ligands (drugs) with modest binding affinity. Key to this strategy is attaching to the ligand an affinity bait (AB) and a chemical reporter (CR) group, where the AB irreversibly attaches the ligand to the receptor upon binding and the CR group is employed for receptor detection and isolation. We have tested this AB&CR strategy using lacosamide ((R)-1), a low-molecular-weight antiepileptic drug. We demonstrate that using a (R)-lacosamide AB&CR agent ((R)-2) 14-3-3 ζ in rodent brain soluble lysates is preferentially adducted, adduction is stereospecific with respect to the AB&CR agent, and adduction depends upon the presence of endogenous levels of the small molecule metabolite xanthine. Substitution of lacosamide AB agent ((R)-5) for (R)-2 led to the identification of the 14-3-3 ζ adduction site (K120) by mass spectrometry. Competition experiments using increasing amounts of (R)-1 in the presence of (R)-2 demonstrated that (R)-1 binds at or near the (R)-2 modification site on 14-3-3 ζ. Structure-activity studies of xanthine derivatives provided information concerning the likely binding interaction between this metabolite and recombinant 14-3-3 ζ. Documentation of the 14-3-3 ζ-xanthine interaction was obtained with isothermal calorimetry using xanthine and the xanthine analogue 1,7-dimethylxanthine.

Systematic integration of experimental data and models in systems biology.

BACKGROUND: The behaviour of biological systems can be deduced from their mathematical models. However, multiple sources of data in diverse forms are required in the construction of a model in order to define its components and their biochemical reactions, and corresponding parameters. Automating the assembly and use of systems biology models is dependent upon data integration processes involving the interoperation of data and analytical resources. RESULTS: Taverna workflows have been developed for the automated assembly of quantitative parameterised metabolic networks in the Systems Biology Markup Language (SBML). A SBML model is built in a systematic fashion by the workflows which starts with the construction of a qualitative network using data from a MIRIAM-compliant genome-scale model of yeast metabolism. This is followed by parameterisation of the SBML model with experimental data from two repositories, the SABIO-RK enzyme kinetics database and a database of quantitative experimental results. The models are then calibrated and simulated in workflows that call out to COPASIWS, the web service interface to the COPASI software application for analysing biochemical networks. These systems biology workflows were evaluated for their ability to construct a parameterised model of yeast glycolysis. CONCLUSIONS: Distributed information about metabolic reactions that have been described to MIRIAM standards enables the automated assembly of quantitative systems biology models of metabolic networks based on user-defined criteria. Such data integration processes can be implemented as Taverna workflows to provide a rapid overview of the components and their relationships within a biochemical system.

Phosphoregulation of human Mps1 kinase.

The dual-specificity protein kinase Mps1 (monopolar spindle 1) is a phosphoprotein required for error-free mitotic progression in eukaryotes. In the present study, we have investigated human Mps1 phosphorylation using combined mass spectrometric, mutational and phosphospecific antibody approaches. We have identified 16 sites of Mps1 autophosphorylation in vitro, several of which are required for catalytic activity after expression in bacteria or in cultured human cells. Using novel phosphospecific antibodies, we show that endogenous Mps1 is phosphorylated on Thr(686) and Ser(821) during mitosis, and demonstrate that phosphorylated Mps1 localizes to the centrosomes of metaphase cells. Taken together, these results reveal the complexity of Mps1 regulation by multi-site phosphorylation, and demonstrate conclusively that phosphorylated Mps1 associates with centrosomes in mitotic human cells.

Exploiting proteomic data for genome annotation and gene model validation in Aspergillus niger.

BACKGROUND: Proteomic data is a potentially rich, but arguably unexploited, data source for genome annotation. Peptide identifications from tandem mass spectrometry provide prima facie evidence for gene predictions and can discriminate over a set of candidate gene models. Here we apply this to the recently sequenced Aspergillus niger fungal genome from the Joint Genome Institutes (JGI) and another predicted protein set from another A.niger sequence. Tandem mass spectra (MS/MS) were acquired from 1d gel electrophoresis bands and searched against all available gene models using Average Peptide Scoring (APS) and reverse database searching to produce confident identifications at an acceptable false discovery rate (FDR). RESULTS: 405 identified peptide sequences were mapped to 214 different A.niger genomic loci to which 4093 predicted gene models clustered, 2872 of which contained the mapped peptides. Interestingly, 13 (6%) of these loci either had no preferred predicted gene model or the genome annotators' chosen "best" model for that genomic locus was not found to be the most parsimonious match to the identified peptides. The peptides identified also boosted confidence in predicted gene structures spanning 54 introns from different gene models. CONCLUSION: This work highlights the potential of integrating experimental proteomics data into genomic annotation pipelines much as expressed sequence tag (EST) data has been. A comparison of the published genome from another strain of A.niger sequenced by DSM showed that a number of the gene models or proteins with proteomics evidence did not occur in both genomes, further highlighting the utility of the method.

Digital ion trap mass spectrometer for probing the structure of biological macromolecules by gas phase X-ray scattering.

Small-angle X-ray scattering is a technique for the characterization and structural analysis of a variety of materials including biological macromolecules and polymers. For the conformational analysis of proteins, the interaction between sample and X-rays is generally performed when the proteins are present in solution. Here a three-dimensional digital ion trap interfaced with a high intensity X-ray source is built to prove that X-ray scattering can be performed on ions isolated in gas-phase. Initial experiments on an unresolved ion population of multiply charged cytochrome C ions indicate that a small-angle X-ray scattering signal can be detected and that partial structural information can be extracted about the overall molecular structure of protein ions.

Analysis of the trypanosome flagellar proteome using a combined electron transfer/collisionally activated dissociation strategy.

The use of electron-transfer dissociation as an alternative peptide ion activation method for generation of protein sequence information is examined here in comparison with the conventional method of choice, collisionally activated dissociation, using a linear ion trapping instrument. Direct comparability between collisionally and electron-transfer-activated product ion data were ensured by employing an activation-switching method during acquisition, sequentially activating precisely the same precursor ion species with each fragmentation method in turn. Sequest (Thermo Fisher Scientific, San Jose, CA) searching of product ion data generated an overlapping yet distinct pool of polypeptide identifications from the products of collisional and electron-transfer-mediated activation products. To provide a highly confident set of protein recognitions, identification data were filtered using parameters that achieved a peptide false discovery rate of 1%, with two or more independent peptide assignments required for each protein. The use of electron transfer dissociation (ETD) has allowed us to identify additional peptides where the quality of product ion data generated by collisionally activated dissociation (CAD) was insufficient to infer peptide sequence. Thus, a combined ETD/CAD approach leads to the recognition of more peptides and proteins than are achieved using peptide analysis by CAD- or ETD-based tandem mass spectrometry alone.

Observations on the detection of b- and y-type ions in the collisionally activated decomposition spectra of protonated peptides.

Tandem mass spectrometric data from peptides are routinely used in an unsupervised manner to infer product ion sequence and hence the identity of their parent protein. However, significant variability in relative signal intensity of product ions within peptide tandem mass spectra is commonly observed. Furthermore, instrument-specific patterns of fragmentation are observed, even where a common mechanism of ion heating is responsible for generation of the product ions. This information is currently not fully exploited within database searching strategies; this motivated the present study to examine a large dataset of tandem mass spectra derived from multiple instrumental platforms. Here, we report marked global differences in the product ion spectra of protonated tryptic peptides generated from two of the most common proteomic platforms, namely tandem quadrupole-time-of-flight and quadrupole ion trap instruments. Specifically, quadrupole-time-of-flight tandem mass spectra show a significant under-representation of N-terminal b-type fragments in comparison to quadrupole ion trap product ion spectra. Energy-resolved mass spectrometry experiments conducted upon test tryptic peptides clarify this disparity; b-type ions are significantly less stable than their y-type N-terminal counterparts, which contain strongly basic residues. Secondary fragmentation processes which occur within the tandem quadrupole-time-of-flight device account for the observed differences, whereas this secondary product ion generation does not occur to a significant extent from resonant excitation performed within the quadrupole ion trap. We suggest that incorporation of this stability information in database searching strategies has the potential to significantly improve the veracity of peptide ion identifications as made by conventional database searching strategies.

Evidence for structural variants of a- and b-type peptide fragment ions using combined ion mobility/mass spectrometry.

Tandem mass spectrometry (MS/MS) of peptides plays a key role in the field of proteomics, and an understanding of the fragmentation mechanisms involved is vital for data interpretation. Not all the fragment ions observed by low-energy collision-induced dissociation of protonated peptides are readily explained by the generally accepted structures for a- and b-ions. The possibility of a macrocyclic structure for b-type ions has been recently proposed. In this study, we have undertaken investigations of linear protonated YAGFL-NH(2), N-acetylated-YAGFL-NH(2), and cyclo-(YAGFL) peptides and their fragments using a combination of ion mobility (IM) separation and mass spectrometry. The use of IM in this work both gives insight into relative structural forms of the ion species and crucial separation of isobaric species. Our study provides compelling evidence for the formation of a stable macrocyclic structure for the b(5) ion generated by fragmentation of protonated linear YAGFL-NH(2). Additionally we demonstrate that the a(4) ion fragment of protonated YAGFL-NH(2) has at least two structures; one of which is attributable to a macrocyclic structure on the basis of its subsequent fragmentation. More generally, this work emphasizes the value of combined IM-MS/MS in probing the detailed fragmentation mechanisms of peptide ions, and illustrates the use of combined ion mobility/collisional activation/mass spectrometry analysis in achieving an effective enhancement of the resolution of the mobility separator.