Stretchable ionic-electronic bilayer hydrogel electronics enable in situ detection of solid-state epidermal biomarkers.

Continuous and in situ detection of biomarkers in biofluids (for example, sweat) can provide critical health data but is limited by biofluid accessibility. Here we report a sensor design that enables in situ detection of solid-state biomarkers ubiquitously present on human skin. We deploy an ionic-electronic bilayer hydrogel to facilitate the sequential dissolution, diffusion and electrochemical reaction of solid-state analytes. We demonstrate continuous monitoring of water-soluble analytes (for example, solid lactate) and water-insoluble analytes (for example, solid cholesterol) with ultralow detection limits of 0.51 and 0.26 nmol cm-2, respectively. Additionally, the bilayer hydrogel electrochemical interface reduces motion artefacts by a factor of three compared with conventional liquid-sensing electrochemical interfaces. In a clinical study, solid-state epidermal biomarkers measured by our stretchable wearable sensors showed a high correlation with biomarkers in human blood and dynamically correlated with physiological activities. These results present routes to universal platforms for biomarker monitoring without the need for biofluid acquisition.

Thioxanthylium Cations: Highly Reversible Hydrochromic Mate-rials with Tunable Color and Moisture Sensitivity.

Hydrochromic materials, which change color in response to moisture, are highly sought-after due to some unique applications such as moisture detection, humidity monitoring, anti-counterfeiting, and sweat-pore mapping. We herein report a new thioxanthene-9-ols/thioxanthylium cations hydrochromic system. The hydrochromic thioxanthylium cations can be generated/regenerated by exposing a chemically stable thioxanthene-9-ol to trifluoroacetic acid (TFA). The intensely colored thioxanthylium cations can be chemically reverted to the colorless thioxanthene-9-ol. Interestingly, the conversion between thioxanthene-9-ol and its cation species was found to be highly reversible in most cases (up to 50 activation-deactivation cycles). The color and moisture-sensitivity of thioxanthylium cations were also validated to be tunable via functionalization of the thioxanthene core with different aliphatic and aromatic groups at its 9 or 2,7-positions. Finally, paper probes were prepared using solution-immersion and inkjet-printing techniques to demonstrate the system's potential applications in humidity sensing and anti-counterfeiting.

Second-Harmonic Generation from Sub-5 nm Gaps by Directed Self-Assembly of Nanoparticles onto Template-Stripped Gold Substrates.

Strong field enhancement and confinement in plasmonic nanostructures provide suitable conditions for nonlinear optics in ultracompact dimensions. Despite these enhancements, second-harmonic generation (SHG) is still inefficient due to the centrosymmetric crystal structure of the bulk metals used, e.g., Au and Ag. Taking advantage of symmetry breaking at the metal surface, one could greatly enhance SHG by engineering these metal surfaces in regions where the strong electric fields are localized. Here, we combine top-down lithography and bottom-up self-assembly to lodge single rows of 8 nm diameter Au nanoparticles into trenches in a Au film. The resultant "double gap" structures increase the surface-to-volume ratio of Au colocated with the strong fields in ∼2 nm gaps to fully exploit the surface SHG of Au. Compared to a densely packed arrangement of AuNPs on a smooth Au film, the double gaps enhance SHG emission by 4200-fold to achieve an effective second-order susceptibility χ((2)) of 6.1 pm/V, making it comparable with typical nonlinear crystals. This patterning approach also allows for the scalable fabrication of smooth gold surfaces with sub-5 nm gaps and presents opportunities for optical frequency up-conversion in applications that require extreme miniaturization.

Skin-Attachable Ink-Dispenser-Printed Paper Fluidic Sensor Patch for Colorimetric Sweat Analysis.

In situ analysis of sweat biomarkers potentially provides noninvasive lifestyle monitoring and early diagnosis. Quantitative detection of sweat rate is crucial for thermoregulation and preventing heat injuries. Here, a skin-attachable paper fluidic patch is reported for in situ colorimetric sensing of multiple sweat markers (pH, glucose, lactate, and uric acid) with concurrent sweat rate tracking. Two sets of fluidic patterns-multiplexed detection zones and a longitudinal sweat rate channel-are directly printed by an automated ink dispenser from a specially developed ceramic-based ink. The ceramic ink thermal-cures into an impervious barrier, confining sweat within the channels. The ceramic-ink-printed boundary achieves higher pattern resolution, prevents fluid leakage, attains pattern thermal stability, and resistant to organic solvents. The cellulose matrix of the detection zones is modified with nanoparticles to improve the color homogeneity and sweat sensor sensitivity. The sweat rate channel is made moisture sensitive by incorporating a metal-salt-based dye. The change in saturation/color of the detection zones and/or channels upon sweat addition can be visually detected or quantified by a smartphone camera. A cost-effective way is provided to fabricate paper fluidic sensor patches, successfully demonstrating on-body multiplexed evaluation of sweat analytes. Such skin wearables offer on-site analysis, meaningful to an increasingly health-conscious population.

Donor-acceptor bulk-heterojunction sensitizer for efficient solid-state infrared-to-visible photon up-conversion.

Solid-state infrared-to-visible photon up-conversion is important for spectral-tailoring applications. However, existing up-conversion systems not only suffer from low efficiencies and a need for high excitation intensity, but also exhibit a limited selection of materials and complex fabrication processes. Herein, we propose a sensitizer with a bulk-heterojunction structure, comprising both an energy donor and an energy acceptor, for triplet-triplet annihilation up-conversion devices. The up-conversion occurs through charge separation at the donor-acceptor interface, followed by the formation of charge transfer state between the energy donor and annihilator following the spin statistics. The bulk-heterojunction sensitizer ensures efficient charge generation and low charge recombination. Hence, we achieve a highly efficient solid-state up-conversion device with 2.20% efficiency and low excitation intensity (10 mW cm-2) through a one-step solution method. We also demonstrate bright up-conversion devices on highly-flexible large-area substrates. This study introduces a simple and scalable platform strategy for fabricating efficient up-conversion devices.

Optimal Shell Thickness of Metal@Insulator Nanoparticles for Net Enhancement of Photogenerated Polarons in P3HT Films.

Embedding metal nanoparticles in the active layer of organic solar cells has been explored as a route for improving charge carrier generation, with localized field enhancement as a proposed mechanism. However, embedded metal nanoparticles can also act as charge recombination sites. To suppress such recombination, the metal nanoparticles are commonly coated with a thin insulating shell. At the same time, this insulating shell limits the extent that the localized enhanced electric field influences charge generation in the organic medium. It is presumed that there is an optimal thickness which maximizes field enhancement effects while suppressing recombination. Atomic Layer Deposition (ALD) was used to deposit Al2O3 layers of different thicknesses onto silver nanoparticles (Ag NPs), in a thin film of P3HT. Photoinduced absorption (PIA) spectroscopy was used to study the dependence of the photogenerated P3HT(+) polaron population on the Al2O3 thickness. The optimal thickness was found to be 3-5 nm. This knowledge can be further applied in the design of metal nanoparticle-enhanced solar cells.

Improvement of CH3NH3PbI3 Formation for Efficient and Better Reproducible Mesoscopic Perovskite Solar Cells.

High-performance perovskite solar cells (PSCs) are obtained through optimization of the formation of CH3NH3PbI3 nanocrystals on mesoporous TiO2 film, using a two-step sequential deposition process by first spin-coating a PbI2 film and then submerging it into CH3NH3I solution for perovskite conversion (PbI2 + CH3NH3I → CH3NH3PbI3). It is found that the PbI2 morphology from different film formation process (thermal drying, solvent extraction, and as-deposited) has a profound effect on the CH3NH3PbI3 active layer formation and its nanocrystalline composition. The residual PbI2 in the active layer contributes to substantial photocurrent losses, thus resulting in low and inconsistent PSC performances. The PbI2 film dried by solvent extraction shows enhanced CH3NH3PbI3 conversion as the loosely packed disk-like PbI2 crystals allow better CH3NH3I penetration and reaction in comparison to the multicrystal aggregates that are commonly obtained in the thermally dried PbI2 film. The as-deposited PbI2 wet film, without any further drying, exhibits complete conversion to CH3NH3PbI3 in MAI solution. The resulting PSCs reveal high power conversion efficiency of 15.60% with a batch-to-batch consistency of 14.60 ± 0.55%, whereas a lower efficiency of 13.80% with a poorer consistency of 11.20 ± 3.10% are obtained from the PSCs using thermally dried PbI2 films.

Charge mobility and recombination in a new hole transporting polymer and its photovoltaic blend.

The charge mobility in a new hole transporting polymer, poly(2,6-bis(thiophene-2-yl)-3,5-dipentadecyldithieno[3,2-b;2',3'-d]thiophene) (PBTDTT-15), and its blend with (6,6)-phenyl-C(70)-butyric acid methyl ester (PC(70)BM) in a weight ratio of 1:3 at ambient atmosphere condition was investigated using time-of-flight (TOF) photoconductivity and photoinduced charge extraction by linearly increasing voltage (PhotoCELIV) techniques. The bulk heterojunction based photovoltaic (PV) blend (PBTDTT-15:PC(70)BM (1:3)) exhibited a promising power conversion efficiency (PCE) of 3.23% under air mass 1.5 global (AM 1.5G) illumination of 100mW/cm(2). The charge mobility and recombination properties of the best performing cells were investigated. The hole mobility in the pure PBTDTT-15 was in the range of 4 x 10(-4) cm(2)/(V s), which was reduced almost 5 times in the PBTDTT-15:PC(70)BM (1:3) blend. The PhotoCELIV transient observed for the photovoltaic (PV) blend was dominated by electrons, with the charge mobility of the order of 10(-3) cm(2)/(V s), and a weak shoulder at a long time scale due to holes. The effective bimolecular recombination coefficient (beta) obtained for the PV blend deviated significantly from the Langevin recombination coefficient (beta(L)) indicating a phase-separated morphology. The obtained results indicate that the PBTDTT-15:PC(70)BM blend can be potential for organic solar cell applications.