ABSTRACT
Flax (Linum usitatissimum L.) is a plant of industrial importance, its fibres being presently used for high-value textile applications, composite reinforcements as well as natural actuators. Human interest in this fibre-rich plant dates back several millennia, including to Ancient Egypt where flax was used extensively in various quotidian items. While the recent technical developments of flax fibres continue to diversify through scientific research, the historical use of flax also has rich lessons for today. Through careful examination of ancient Egyptian and modern flax fibres, this study aims to conduct a multi-scale characterization from the yarn to the fibre cell wall scale, linking differences in structure and polysaccharide content to the mechanical performance and durability of flax. Here, a multi-scale biochemical study is enriched by scanning electron microscopy and nanomechanical investigations. A key finding is the similarity of cellulose features, crystallinity index and local mechanical performances between ancient and modern fibres. Biochemically speaking, monosaccharides analysis, deep-UV and NMR investigations demonstrate that ancient fibres exhibit less pectins but a similar hemicellulosic content, especially through uronic acids and galactose, suggesting the sensitivity of these non-crystalline components.
Subject(s)
Cell Wall , Flax , Polysaccharides , Flax/chemistry , Cell Wall/chemistry , Polysaccharides/chemistry , Cellulose/chemistry , Uronic Acids/chemistry , Uronic Acids/analysis , Egypt , Pectins/chemistry , Microscopy, Electron, ScanningABSTRACT
Due to the combination of high mechanical performances and plant-based origin, flax fibers are interesting reinforcement for environmentally friendly composite materials. An increasing amount of research articles and reviews focuses on the processing and properties of flax-based products, without taking into account the original key role of flax fibers, namely, reinforcement elements of the flax stem (Linum usitatissimum L.). The ontogeny of the plant, scattering of fiber properties along the plant, or the plant growth conditions are rarely considered. Conversely, exploring the development of flax fibers and parameters influencing the plant mechanical properties (at the whole plant or fiber scale) could be an interesting way to control and/or optimize fiber performances, and to a greater extent, flax fiber-based products. The first part of the present review synthesized the general knowledge about the growth stages of flax plants and the internal organization of the stem biological tissues. Additionally, key findings regarding the development of its fibers, from elongation to thickening, are reviewed to offer a piece of explanation of the uncommon morphological properties of flax fibers. Then, the slenderness of flax is illustrated by comparison of data given in scientific research on herbaceous plants and woody ones. In the second section, a state of the art of the varietal selection of several main industrial crops is given. This section includes the different selection criteria as well as an overview of their impact on plant characteristics. A particular interest is given to the lodging resistance and the understanding of this undesired phenomenon. The third section reviews the influence of the cultural conditions, including seedling rate and its relation with the wind in a plant canopy, as well as the impact of main tropisms (namely, thigmotropism, seismotropism, and gravitropism) on the stem and fiber characteristics. This section illustrates the mechanisms of plant adaptation, and how the environment can modify the plant biomechanical properties. Finally, this review asks botanists, breeders, and farmers' knowledge toward the selection of potential flax varieties dedicated to composite applications, through optimized fiber performances. All along the paper, both fibers morphology and mechanical properties are discussed, in constant link with their use for composite materials reinforcement.
ABSTRACT
Flax retting is a major bioprocess in the cultivation and extraction cycle of flax fibres. The aim of the present study is to improve the understanding of the evolution of fibre properties and ultrastructure caused by this process at the plant cell wall scale. Initially, investigations of the mechanical performances of the flax cell walls by Atomic Force Microscopy (AFM) in Peak Force mode revealed a significant increase (+33%) in the cell wall indentation modulus with retting time. Two complementary structural studies are presented here, namely using X-Ray Diffraction (XRD) and solid state Nuclear Magnetic Resonance (NMR). An estimation of the cellulose crystallinity index by XRD measurements, confirmed by NMR, shows an increase of 8% in crystallinity with retting mainly due to the disappearance of amorphous polymer. In addition, NMR investigations show a compaction of inaccessible cell wall polymers, combined with an increase in the relaxation times of the C4 carbon. This densification provides a structural explanation for the observed improvement in mechanical performance of the secondary wall of flax fibres during the field retting process.
ABSTRACT
The present paper proposes to carefully study and describe the reinforcement mechanisms within a flax stem, which is an exceptional natural model of composite structure. Thanks to accurate microscopic investigations, with both optical and SEM method, we finely depicted the flax stem architecture, which can be view as a composite structure with an outer protection, a unidirectional ply on the periphery and a porous core; each component has a specific function, such as mechanical reinforcement for the unidirectional ply and the porous core. The significant mechanical role of fibres was underlined, as well as their local organisation in cohesive bundles, obtained because of an intrusive growth and evidenced in this work through nanomechanical AFM measurement and 3D reconstruction. Following a biomimetic approach, these data provide a source of inspiration for the composite materials of tomorrow.
Subject(s)
Biomimetic Materials/chemistry , Flax/ultrastructure , Plant Stems/ultrastructure , Biomechanical Phenomena , Flax/anatomy & histology , Flax/chemistry , Image Processing, Computer-Assisted , Microscopy, Atomic Force , Microscopy, Electron, Scanning , Phloem/chemistry , Plant Stems/anatomy & histology , Plant Stems/chemistry , Tensile Strength , Xylem/chemistryABSTRACT
Nanofibrous membranes based on polycaprolactone (PCL) have a large potential for use in biomedical applications but are limited by the hydrophobicity of PCL. Blend electrospinning of PCL with other biomedical suited materials, such as gelatin (Gt) allows for the design of better and new materials. This study investigates the possibility of blend electrospinning PCL/Gt nanofibrous membranes which can be used to design a range of novel materials better suited for biomedical applications. The electrospinnability and stability of PCL/Gt blend nanofibers from a non-toxic acid solvent system are investigated. The solvent system developed in this work allows good electrospinnable emulsions for the whole PCL/Gt composition range. Uniform bead-free nanofibers can easily be produced, and the resulting fiber diameter can be tuned by altering the total polymer concentration. Addition of small amounts of water stabilizes the electrospinning emulsions, allowing the electrospinning of large and homogeneous nanofibrous structures over a prolonged period. The resulting blend nanofibrous membranes are analyzed for their composition, morphology, and homogeneity. Cold-gelling experiments on these novel membranes show the possibility of obtaining water-stable PCL/Gt nanofibrous membranes, as well as nanostructured hydrogels reinforced with nanofibers. Both material classes provide a high potential for designing new material applications.