ABSTRACT
The stability of surrounding rock with bolt support depends on the stability within the reinforcement range. To understand the reinforcing mechanism of a rectangular roadway bolt fully and accurately, a quantitative method for evaluating the stability of the surrounding rock of a rectangular roadway must be developed. First, a roof beam model of a rectangular tunnel is established according to the deformation law of surrounding rock. Based on the elastic-plastic theory, the deflection calculation formula can be derived, and the ultimate load of the roof beam can be obtained under the plastic state without support. Second, based on the reinforcement effect of bolts, a model of a surrounding rock reinforcement body is established, the physical and mechanical properties of this body are deduced, and a method for evaluating the stability of surrounding rock is derived. Finally, by considering actual engineering cases, the theoretical calculation results of surrounding rock deformation are compared with the numerical simulation and field monitoring results. Moreover, the influence of different parameters of the bolt support on the mechanical characteristics and stability of reinforcement is investigated. The results show that the theoretical calculations approximate the numerical simulation and field monitoring values, thus verifying the rationality of the theory. The physical and mechanical properties and stability of the surrounding rock reinforcement body are considerably affected by changes in bolt length and spacing. The anchor design must apply the following principle: the bolt must either be long and sparsely spaced or short and densely spaced. The theory presented in this paper provides a relatively simple and fast quantitative calculation method for the study of the surrounding rock stability of bolt-supported rectangular roadways.
ABSTRACT
Shield segments of subway tunnels are often exposed to the combined actions of several hygrothermal factors that could lead to accidents such as water seepage and tunnel collapse. Further, they often break and deform owing to formation pressure. In addition, uncertainties related to the stress relaxation characteristics and bonding performance of carbon-fiber-reinforced plastics (CFRPs) under a hygrothermal environment make their application in subway systems difficult. This study analyzes the effects of the slip-on-bending strength of CFRP-strengthened shield segments in a hygrothermal environment. In the study, the shield segments are damaged at ambient pressure under a combination of humidity (0%, 5%, and 10%) and temperature (20 °C, 25 °C, 30 °C, and 40 °C). An experimental procedure is designed to evaluate a CFRP-reinforced concrete arch. The method predicts the load-slip relationship and maximum shearing stress and strain. Moreover, confined compression tests are conducted on a tunnel segment lining strengthened with CFRP to evaluate the bearing capacity of the CFRP-strengthened shield segments. An equation for the latter's ultimate bearing capacity is developed based on the elastic layer system theory, stress boundary condition, and bending stress characteristics of axisymmetric elements. It was found that the results from the developed model are compared with the experimental values of CFRP-strengthened shield segments under different humidity values (0%, 5%, and 10%) and a constant temperature. The ultimate strength-the debonding deflection of the CFRP-strengthened shield segment-can be predicted using the proposed ultimate bearing capacity equation with sufficient accuracy.