Turn-on Fluorescent Biosensors for Imaging Hypoxia-like Conditions in Living Cells.

We present the synthesis, photophysical properties, and biological application of nontoxic 3-azo-conjugated BODIPY dyes as masked fluorescent biosensors of hypoxia-like conditions. The synthetic methodology is based on an operationally simple N═N bond-forming protocol, followed by a Suzuki coupling, that allows for a direct access to simple and underexplored 3-azo-substituted BODIPY. These dyes can turn on their emission properties under both chemical and biological reductive conditions, including bacterial and human azoreductases, which trigger the azo bond cleavage, leading to fluorescent 3-amino-BODIPY. We have also developed a practical enzymatic protocol, using an immobilized bacterial azoreductase that allows for the evaluation of these azo-based probes and can be used as a model for the less accessible and expensive human reductase NQO1. Quantum mechanical calculations uncover the restructuration of the topography of the S1 potential energy surface following the reduction of the azo moiety and rationalize the fluorescent quenching event through the mapping of an unprecedented pathway. Fluorescent microscopy experiments show that these azos can be used to visualize hypoxia-like conditions within living cells.

Functionalization of Porous Cellulose with Glyoxyl Groups as a Carrier for Enzyme Immobilization and Stabilization.

The functionalization of the internal surface of macroporous carriers with glyoxyl groups has proven to highly stabilize a large variety of enzymes through multipoint covalent immobilization. In this work, we have translated the surface chemistry developed for the fabrication of glyoxyl-agarose carriers to macroporous cellulose (CEL). To that aim, CEL-based microbeads were functionalized with glyoxyl groups through a stepwise alkoxylation (or alkylation)/oxidation synthetic scheme. This functionalization sequence was analyzed by solid-state NMR, while the scanning electron miscroscopy of CEL microbeads reveals that the mild oxidation conditions negligibly affect the morphological properties of the material. Through the optimal functionalization protocol using rac-glycidol, we introduce up to 200 µmols of aldehyde groups per gram of wet CEL, a similar density to the one obtained for the benchmarked agarose-glyoxyl carrier. This novel CEL-based carrier succeeds to immobilize and stabilize industrially relevant enzymes such as d-amino acid oxidase from Trigonopsis variabilis and xylanases from Trichoderma reseei. Remarkably, the xylanases immobilized on the optimal CEL-based materials present a half-life time of 51 h at 60 °C and convert up to 90% of the xylan after four operation cycles for the synthesis of xylooligosaccharides.

Ethyl esters production catalyzed by immobilized lipases is influenced by n-hexane and ter-amyl alcohol as organic solvents.

Lipase stability in organic solvent is crucial for its application in many biotechnological processes as biocatalyst. One way to improve lipase's activity and stability in unusual reaction medium is its immobilization on inert supports. Here, lipases from different sources and immobilized through weak chemical interactions on hydrophobic and ionic supports had their transesterification ability dramatically dependent on the support and also on the solvent that had been used. The ethanolysis of sardine oil was carried out at the presence of cyclohexane and tert-amyl alcohol, in which Duolite A568-Thermomyces lanuginosa lipase derivative achieved 49% of ethyl esters production after 24 h in cyclohexane. The selectivity of immobilized lipases was also studied and, after 3 h of synthesis, the reaction with Duolite A568-Thermomyces lanuginosa derivative in cyclohexane produced 24% ethyl ester of eicosapentaenoic acid and 1.2% ethyl ester of docosahexaenoic acid, displaying a selectivity index of 20 times the ethyl ester of eicosapentaenoic acid. Different derivatives of Candida antarctica lipases fraction B (CALB) and phospholipase Lecitase® Ultra (Lecitase) were also investigated. Along these lines, a combination between these factors may be applied to improve the activity and selectivity of immobilized lipases, decreasing the total cost of the process.

Fine Modulation of the Catalytic Properties of Rhizomucor miehei Lipase Driven by Different Immobilization Strategies for the Selective Hydrolysis of Fish Oil.

Functional properties of each enzyme strictly depend on immobilization protocol used for linking enzyme and carrier. Different strategies were applied to prepare the immobilized derivatives of Rhizomucor miehei lipase (RML) and chemically aminated RML (NH2-RML). Both RML and NH2-RML forms were covalently immobilized on glyoxyl sepharose (Gx-RML and Gx-NH2-RML), glyoxyl sepharose dithiothreitol (Gx-DTT-RML and Gx-DTT-NH2-RML), activated sepharose with cyanogen bromide (CNBr-RML and CNBr-NH2-RML) and heterofunctional epoxy support partially modified with iminodiacetic acid (epoxy-IDA-RML and epoxy-IDA-NH2-RML). Immobilization varied from 11% up to 88% yields producing specific activities ranging from 0.5 up to 1.9 UI/mg. Great improvement in thermal stability for Gx-DTT-NH2-RML and epoxy-IDA-NH2-RML derivatives was obtained by retaining 49% and 37% of their initial activities at 70 °C, respectively. The regioselectivity of each derivative was also examined in hydrolysis of fish oil at three different conditions. All the derivatives were selective between cis-5,8,11,14,17-eicosapentaenoic acid (EPA) and cis-4,7,10,13,16,19-docosahexaenoic acid (DHA) in favor of EPA. The highest selectivity (32.9 folds) was observed for epoxy-IDA-NH2-RML derivative in the hydrolysis reaction performed at pH 5 and 4 °C. Recyclability study showed good capability of the immobilized biocatalysts to be used repeatedly, retaining 50-91% of their initial activities after five cycles of the reaction.

Production of Omegas-6 and 9 from the Hydrolysis of Açaí and Buriti Oils by Lipase Immobilized on a Hydrophobic Support.

This paper describes a bioprocess to obtain omegas-6 and 9 from the hydrolysis of Açaí (Euterpe oleracea Martius) and Buriti (Mauritia flexuosa) oils by lipases immobilized on octyl-sepharose. For this, oils and butters were initially selected as the carbon source which resulted in higher production of lipases in Beauveria bassiana and Fusarium oxysporum cultures. The carbon source that provided secretion of lipase by B. bassiana was Açaí oil, and for F. oxysporum, Bacuri butter. Lipases obtained under these conditions were immobilized on octyl-sepharose, and both, the derivatives and the crude extracts were biochemically characterized. It was observed that the immobilization promoted an increase of stability in B. bassiana and F. oxysporum lipase activities at the given temperatures and pH. In addition, the immobilization promoted hyperactivation of B. bassiana and F. oxysporum lipase activities being 23.5 and 11.0 higher than free enzyme, respectively. The hydrolysis of Açaí and Buriti oils by the derivatives was done in a biphasic (organic/aqueous) system, and the products were quantified in RP-HPLC. The results showed the potential of these immobilized lipases to obtain omegas-6 and 9 from Brazilian natural oils. This work may improve the enzymatic methodologies for obtaining foods and drugs enriched with fatty acids.

Oriented Attachment of Recombinant Proteins to Agarose-Coated Magnetic Nanoparticles by Means of a ß-Trefoil Lectin Domain.

Design of generic methods aimed at the oriented attachment of proteins at the interfacial environment of magnetic nanoparticles currently represents an active field of research. With this in mind, we have prepared and characterized agarose-coated maghemite nanoparticles to set up a platform for the attachment of recombinant proteins fused to the ß-trefoil lectin domain LSL150, a small protein that combines fusion tag properties with agarose-binding capacity. Analysis of the agarose-coated nanoparticles by dynamic light scattering, Fourier transform infrared spectroscopy, and thermogravimetric studies shows that decoupling particle formation from agarose coating provides better results in terms of coating efficiency and particle size distribution. LSL150 interacts with these agarose-coated nanoparticles exclusively through the recognition of the sugars of the polymer, forming highly stable complexes, which in turn can be dissociated ad hoc with the competing sugar lactose. Characterization of the complexes formed with the fusion proteins LSL-EGFP (LSL-tagged enhanced green fluorescent protein from Aquorea victoria) and LSL-BTL2 (LSL-tagged lipase from Geobacillus thermocatenolatus) provided evidence supporting a topologically oriented binding of these molecules to the interface of the agarose-coated nanoparticles. This is consistent with the marked polarity of the ß-trefoil structure where the sugar-binding sites and the N- and C-terminus ends are at opposed sides. In summary, LSL150 displays topological and functional features expected from a generic molecular adaptor for the oriented attachment of proteins at the interface of agarose-coated nanoparticles.

Hydrophobic adsorption in ionic medium improves the catalytic properties of lipases applied in the triacylglycerol hydrolysis by synergism.

It is known that lipases may have their catalytic properties improved by the action of some salts or by the adsorption on hydrophobic supports. However, what we present in this work is more than that: we evaluate the combination of these two factors of hyperactivation of lipases from Acremonium-like ROG 2.1.9, a study that has not been done so far. This work proves that a synergistic effect occurs when the lipases are immobilized on hydrophobic supports at the presence of sodium chloride and are applied in triacylglycerol hydrolysis. This assay made it possible to achieve the highest hyperactivation of 500 % with the lipases immobilized on Phenyl-Sepharose and applied with 0.1 M of sodium chloride. Besides this positive effect on enzyme activity, the use of these two factors led to the thermal stability increasing of the immobilized lipases. For this derivative, the recovered activity was approximately 85 % after 6 h incubated at 55 °C and 1.0 M of the sodium chloride against 50 % of the same derivative without this salt. Furthermore, others assays were performed to prove the evidences about the synergistic effect, showing a promising method to improve the catalytic properties of the lipases from Acremonium-like ROG 2.1.9.

Improving Properties of a Novel ß-Galactosidase from Lactobacillus plantarum by Covalent Immobilization.

A novel ß-galactosidase from Lactobacillus plantarum (LPG) was over-expressed in E. coli and purified via a single chromatographic step by using lowly activated IMAC (immobilized metal for affinity chromatography) supports. The pure enzyme exhibited a high hydrolytic activity of 491 IU/mL towards o-nitrophenyl ß-D-galactopyranoside. This value was conserved in the presence of different divalent cations and was quite resistant to the inhibition effects of different carbohydrates. The pure multimeric enzyme was stabilized by multipoint and multisubunit covalent attachment on glyoxyl-agarose. The glyoxyl-LPG immobilized preparation was over 20-fold more stable than the soluble enzyme or the one-point CNBr-LPG immobilized preparation at 50 °C. This ß-galactosidase was successfully used in the hydrolysis of lactose and lactulose and formation of different oligosaccharides was detected. High production of galacto-oligosaccharides (35%) and oligosaccharides derived from lactulose (30%) was found and, for the first time, a new oligosaccharide derived from lactulose, tentatively identified as 3'-galactosyl lactulose, has been described.

Characterization of a tannase from Emericella nidulans immobilized on ionic and covalent supports for propyl gallate synthesis.

The extracellular tannase from Emericela nidulans was immobilized on different ionic and covalent supports. The derivatives obtained using DEAE-Sepharose and Q-Sepharose were thermally stable from 60 to 75 °C, with a half life (t50) >24 h at 80 °C at pH 5.0. The glyoxyl-agarose and amino-glyoxyl derivatives showed a thermal stability which was lower than that observed for ionic supports. However, when the stability to pH was considered, the derivatives obtained from covalent supports were more stable than those obtained from ionic supports. DEAE-Sepharose and Q-Sepharose derivatives as well as the free enzyme were stable in 30 and 50 % (v/v) 1-propanol. The CNBr-agarose derivative catalyzed complete tannic acid hydrolysis, whereas the Q-Sepharose derivative catalyzed the transesterification reaction to produce propyl gallate (88 % recovery), which is an important antioxidant.

Altering the interfacial activation mechanism of a lipase by solid-phase selective chemical modification.

This study presents a combined protein immobilization, directed mutagenesis, and site-selective chemical modification approach, which was used to create a hyperactivated semisynthetic variant of BTL2. Various alkane chains were tethered at three different positions in order to mimic the lipase interfacial activation exogenously triggered by detergents. Optimum results were obtained when a dodecane chain was introduced at position 320 by solid-phase site-selective chemical modification. The resulting semisynthetic variant showed a 2.5-fold higher activity than the wild-type nonmodified variant in aqueous conditions. Remarkably, this is the maximum hyperactivation ever observed for BTL2 in the presence of detergents such as Triton X-100. We present evidence to suggest that the endogenous dodecane chain hyperactivates the enzyme in a similar fashion as an exogenous detergent molecule. In this way, we also observe a faster irreversible enzyme inhibition and an altered detergent sensitivity profile promoted by the site-selective chemical modification. These findings are also supported by fluorescence studies, which reveal that the structural conformation changes of the semisynthetic variant are different to those of the wild type, an effect that is more pronounced in the presence of detergent. Finally, the optimal immobilized semisynthetic variant was successfully applied to the selective synthesis of oxiran-2-yl butyrate. Significantly, this biocatalyst is 12-fold more efficient than the immobilized wild-type enzyme, producing the S-enantiomer with higher enantiospecificity (ee = 92%).

Omega-3 production by fish oil hydrolysis using a lipase from Burkholderia gladioli BRM58833 immobilized and stabilized by post-immobilization techniques.

Immobilization of lipase from Burkholderia gladioli BRM58833 on octyl sepharose (OCT) resulted in catalysts with higher activity and stability. Following, strategies were studied to further stabilize and secure the enzyme to the support using functionalized polymers, like polyethylenimine (PEI) and aldehyde-dextran (DEXa), to cover the catalyst with layers at different combinations. Alternatively, the construction of a bifunctional layer was studied using methoxypolyethylene glycol amine (NH 2 -PEG) and glycine. The catalyst OCT-PEI-DEXa was the most thermostable, with a 263.8-fold increase in stability when compared to the control condition. When evaluated under alkaline conditions, OCT-DEXa-PEG 10 /Gly was the most stable, reaching stability 70.1 times greater than the control condition. Proportionally, the stabilization obtained for B. gladioli BRM58833 lipase was superior to that obtained for the commercial B. cepacia lipase. Preliminary results in the hydrolysis of fish oil demonstrated the potential of the coating technique with bifunctional polymers, resulting in a stable catalyst with greater catalytic capacity for the production of omega-3 PUFAs. According to the results obtained, it is possible to modulate B. gladioli BRM58833 lipase properties like stability and catalytic activity for enrichment of omega-3 fatty acids.

Glyoxyl-disulfide agarose: a tailor-made support for site-directed rigidification of proteins.

A new strategy has been developed for site-directed immobilization/rigidification of genetically modified enzymes through multipoint covalent attachment on bifunctional disulfide-glyoxyl supports. Here the mechanism is described as a two-step immobilization/rigidification protocol where the enzyme is directly immobilized by thiol-disulfide exchange between the ß-thiol of the single genetically introduced cysteine and the few disulfide groups presented on the support surface (3 µmol/g). Afterward, the enzyme is uniquely rigidified by multipoint covalent attachment (MCA) between the lysine residues in the vicinity of the introduced cysteine and the many glyoxyl groups (220 µmol/g) on the support surface. Both site-directed immobilization and rigidification have been possible only on these novel bifunctional supports. In fact, this technology has made possible to elucidate the protein regions where rigidification by MCA promoted higher protein stabilizations. Hence, rigidification of vicinity of position 333 from lipase 2 from Geobacillus thermocatenulatus (BTL2) promoted a stabilization factor of 33 regarding the unipunctual site-directed immobilized derivative. In the same context, rigidification of penicillin G acylase from E. coli (PGA) through position ß201 resulted in a stabilization factor of 1069. Remarkably, when PGA was site-directed rigidified through that position, it presented a half-life time of 140 h under 60% (v/v) of dioxane and 4 °C, meaning a derivative eight times more stable than the PGA randomly immobilized on glyoxyl-disulfide agarose. Herein we have opened a new scenario to optimize the stabilization of proteins via multipoint covalent immobilization, which may represent a breakthrough in tailor-made tridimensional rigidification of proteins.

Simple strategy of reactivation of a partially inactivated penicillin g acylase biocatalyst in organic solvent and its impact on the synthesis of beta-lactam antibiotics.

Some reactions of organic synthesis require to be performed in rather aggressive media, like organic solvents, that frequently impair enzyme operational stability to a considerable extent. We have studied the option of developing a reactivation strategy to increase biocatalyst lifespan under such conditions, under the hypothesis that organic solvent enzyme inactivation is a reversible process. Glyoxyl agarose immobilized penicillin G acylase and cross-linked enzyme aggregates of the enzyme were considered as biocatalysts performing in dioxane medium. Reactivation strategy consisted in re-incubation in aqueous medium of the partly inactivated biocatalysts in organic medium, best conditions of reactivation being studied with respect to dioxane concentration and level of enzyme inactivation attained prior to reactivation. Best results were obtained with glyoxyl agarose immobilized penicillin G acylase at all levels of residual activity studied, with reactivations up to 50%; for the case of a biocatalyst inactivated down to 75% of its initial activity, full recovery of enzyme activity was obtained after reactivation. The potential of this strategy was evaluated in the thermodynamically controlled synthesis of deacetoxycephalosporin G in a sequential batch reactor operation, where a 20% increase in the cumulative productivity was obtained by including an intermediate stage of reactivation after 50% inactivation.

Immobilization of the acylase from Escherichia coli on glyoxyl-agarose gives efficient catalyst for the synthesis of cephalosporins.

The catalytic properties of penicillin G acylase (PGA) from Escherichia coli, when used in kinetically controlled N-acylation (kcNa) of cephalosporanic nuclei, can be strongly influenced by the moiety in 3-position of the cephem structure. In the synthesis of Cefonicid (1c), the adsorption of the cephalosporanic nucleus (7-SACA) in the PGA active site appeared sensitively increased by a positive ionic interaction between an arginine (ArgA145) in the enzyme active site and the sulphonic group of the ß-lactam structure. Interestingly, when PGA was immobilized on solid supports, any effect depending on the substrate structure resulted minimized; the catalytic properties of this enzyme were affected with different outcomes depending on the type of matrix and binding chemistry. The PGA immobilized on glyoxyl-agarose (hydrophilic support activated with aldehyde groups) resulted in a good catalyst when used in kinetically controlled N-acylation of different cephalosporanic nuclei. This derivatives allow much better Vs/Vh(1) (defined as the ratio between the rate of synthesis and the rate of hydrolysis of the acylating agent) than the same enzyme immobilized on Eupergit C, an acrylic hydrophobic supports activated with epoxy groups. The synthetic performances of the Eupergit derivative versus different nuclei were always much poorer if compared with glyoxyl-agarose or the soluble protein. The use of PGA immobilized on glyoxyl-agarose allowed the development of efficient processes for the preparation of Cefazolin in high yield and purity. The results obtained in the optimization of this process are presented.

Partial purification and immobilization/stabilization on highly activated glyoxyl-agarose supports of different proteases from flavourzyme.

The fractioning of some components and their immobilization of Flavourzyme, a commercial protease/aminopeptidase preparation, has been investigated to improve its specificity and stability. Adsorption of Flavourzyme on two ionic exchangers yielded two fractions with endoprotease activity and one fraction containing aminopeptidase activity. The use of an amine agarose gel has made it possible to purify a 43 kDa protein with only endoprotease activity. Immobilization of this endoprotease and the original Flavourzyme preparation onto glyoxyl-agarose provided derivatives that were more thermostable than their soluble counterparts. Tests using immobilized Flavourzyme and immobilized purified endoprotease for the hydrolysis of chickpea proteins showed that both preparations can be used for the production of protein hydrolysates and compare very favorably with the original crude Flavourzyme in terms of reducing the production of free amino acids. This was especially so in the case of immobilized endoprotease, which produced only 0.2% free amino acids. Keeping free amino acids content low is very important in protein hydrolysates for nutritional use to avoid excessive osmotic pressure.

Immobilization and Stabilization of Beta-Xylosidases from Penicillium janczewskii.

ß-Xylosidases are critical for complete degradation of xylan, the second main constituent of plant cell walls. A minor ß-xylosidase (BXYL II) from Penicillium janczewskii was purified by ammonium sulfate precipitation (30% saturation) followed by DEAE-Sephadex chromatography in pH 6.5 and elution with KCl. The enzyme presented molecular weight (MW) of 301 kDa estimated by size exclusion chromatography. Optimal activity was observed in pH 3.0 and 70-75 °C, with higher stability in pH 3.0-4.5 and half-lives of 11, 5, and 2 min at 65, 70, and 75 °C, respectively. Inhibition was moderate with Pb+2 and citrate and total with Cu+2, Hg+2, and Co+2. Partially purified BXYL II and BXYL I (the main ß-xylosidase from this fungus) were individually immobilized and stabilized in glyoxyl agarose gels. At 65 °C, immobilized BXYL I and BXYL II presented half-lives of 4.9 and 23.1 h, respectively, therefore being 12.3-fold and 33-fold more stable than their unipuntual CNBr derivatives (reference mimicking soluble enzyme behaviors). During long-term incubation in pH 5.0 at 50 °C, BXYL I and BXYL II glyoxyl derivatives preserved 85 and 35% activity after 25 and 7 days, respectively. Immobilized BXYL I retained 70% activity after 10 reuse cycles of p-nitrophenyl-ß-D-xylopyranoside hydrolysis.

Crosslinked penicillin acylase aggregates for synthesis of beta-lactam antibiotics in organic medium.

Crosslinked enzyme aggregates (CLEAs) of a partially purified penicillin acylase from a recombinant Escherichia coli strain have been produced as a novel type of biocatalysts well endowed to perform in organic media. Different protein precipitants were studied and glutaraldehyde was used as the crosslinking agent. Precipitation curves were obtained for all precipitants to determine the concentrations at which all the protein precipitated out of the solution. The effect of the glutaraldehyde-to-protein ratio was studied with respect to process recovery and the specific activity and stability of the biocatalyst. Recovery of penicillin acylase activity was moderately high, about 50%; major losses of enzyme activity were produced at the precipitation step. Specific activities of all CLEAs were very high, which is one of the advantages of using nonsupported biocatalysts. Ammonium sulfate and tert-butyl alcohol were the best precipitants at a glutaraldehyde-protein mass ratio of 2 and were selected to perform the kinetically controlled synthesis of ampicillin in 60% (v/v) ethylene glycol medium. At comparable conversion yields, volumetric and specific antibiotic productivity were much higher for CLEAs than for carrier-bound penicillin acylases.

Thermodynamically controlled synthesis of amide bonds catalyzed by highly organic solvent-resistant penicillin acylase derivatives.

A study of various direct condensations between different amines, having very high pK values, and unmodified acyl donors has been performed. This has been possible by the use of a very stable PGA derivative. First, it has been found that the higher the cosolvent concentration, the higher the pK of the acyl donor and thus the higher the yield. Therefore, these high concentrations of cosolvents seem to be a requisite for certain enzymatic condensations. Using ethanolamine and 2-hydroxy-2-phenylethyl-amine as nucleophiles and phenyl acetic acid as the acyl donor, the increase in the diglyme concentration from 50 to 90% (v/v) permitted improvement of not only the yield (reaching values higher than 99% in both cases) but also the reaction rates (by 360- or 3-fold, respectively). However, even when using PGA preparations stabilized by multipoint covalent attachment, it was not possible to obtain these results by inactivation of the enzyme derivative. Thus, in the protection of the octylamine with phenylacetic acid in 90% diglyme, the enzymatic activity was more than 20-fold higher using the hydrophilized derivative than the glyoxyl PGA, which allowed us to obtain a yield higher than 99%. Thus, the use of hydrophilized derivatives that are very stable even in the presence of high concentrations of organic solvents opens new opportunities in the use of PGA in organic chemistry.

Immobilization of lactase from Kluyveromyces lactis greatly reduces the inhibition promoted by glucose. full hydrolysis of lactose in milk.

The kinetic constants (Km, Vmax, and inhibition constants for the different products) of soluble and different immobilized preparations of beta-galactosidase from Kluyveromyces lactis were determined. For the soluble enzyme, the Km was 3.6 mM, while the competitive inhibition constant by galactose was 45 mM and the noncompetitive one by glucose was 758 mM. The immobilized preparations conserved similar values of Km and competitive inhibition, but in some instances much higher values for the noncompetitive inhibition constants were obtained. Thus, when glyoxyl or glutaraldehyde supports were used to immobilize the enzyme, the noncompetitive inhibition was greatly reduced (Ki approximately 15,000 and >40,000 mM, respectively), whereas when using sugar chains to immobilize the enzyme the behavior had an effect very similar to the soluble enzyme. These results presented a great practical relevance. While using the soluble enzyme or the enzyme immobilized via the sugar chain as biocatalysts in the hydrolysis of lactose in milk only around 90% of the substrate was hydrolyzed, by using of these the enzyme immobilized via the glyoxyl or the glutaraldehyde groups, more than 99% of the lactose in milk was hydrolyzed.

Co-immobilization of fungal endo-xylanase and α-L-arabinofuranosidase in glyoxyl agarose for improved hydrolysis of arabinoxylan.

Plant cell-wall arabinoxylans have a complex structure that requires the action of a pool of debranching (arabinofuranosidases) and depolymerizing enzymes (endo-xylanase). Two Aspergillus nidulans strains over-secreting endo-xylanase and arabinofuranosidase were inoculated in defined 2% maltose-minimum medium resulting in the simultaneously production of these enzymes. To study the synergistic hydrolysis was used arabinoxylan with 41% of arabinose and 59% of xylose residues. Thus, it was adopted different approaches to arabinoxylan hydrolysis using immobilized arabinofuranosidase and endo-xylanase: (i) endo-xylanase immobilized on glyoxyl agarose; (ii) arabinofuranosidase immobilized on glyoxyl agarose; (T1) hydrolysis of arabinoxylan with arabinofuranosidase immobilized on glyoxyl agarose for debranching, followed by a second hydrolysis with endo-xylanase immobilized on glyoxyl agarose; (T2) hydrolysis using (i) and (ii) simultaneously; and (T3) hydrolysis of arabinoxylan with endo-xylanase and arabinofuranosidase co-immobilized on glyoxyl agarose. It was concluded that arabinoxylan hydrolysis using two derivatives simultaneously (T2) showed greater hydrolytic efficiency and consequently a higher products yield. However, the hydrolysis with multi-enzymatic derivative (T3) results in direct release of xylose and arabinose from a complex substrate as arabinoxylan, which is a great advantage as biotechnological application of this derivative, especially regarding the application of biofuels, since these monosaccharides are readily assimilable for fermentation and ethanol production.