ABSTRACT
2D nanomaterials with ångström-scale thicknesses offer a unique platform for confining molecules at an unprecedentedly small scale, presenting novel opportunities for modulating material properties and probing microscopic phenomena. In this study, mesogen-tethered polyhedral oligomeric silsesquioxane (POSS) amphiphiles with varying numbers of mesogenic tails to systematically influence molecular self-assembly and the architecture of the ensuing supramolecular structures, are synthesized. These organic-inorganic hybrid amphiphiles facilitate precise spatial arrangement and directional alignment of the primary molecular units within highly ordered supramolecular structures. The correlation between molecular design and the formation of superlattices through comprehensive structural analyses, incorporating molecular thermodynamics and kinetics, is explored. The distinct intermolecular interactions of the POSS core and the mesogenic tails drive the preferential formation of a 2D inorganic sublattice while simultaneously guiding the hierarchical assembly of organic lamellae via soft epitaxy. The findings reveal the intricate balance between shape, size, and interaction strengths of the inorganic and organic components, and how these factors collectively influence the structural hierarchy of the superstructures, which consist of multiple sublattices. By controlling this unique molecular behavior, it is possible to modulate or maximize the anisotropy of optical, mechanical, and electrical properties at the sub-nanometer scale for nanotechnology applications.
ABSTRACT
Carbon@titania yolk-shell nanostructures are successfully synthesized at different calcination conditions. These unique structure nanomaterials can be used as a photocatalyst to degrade the emerging water pollutant, acetaminophen (paracetamol). The photodegradation analysis studies have shown that the samples with residual carbon nanospheres have improved the photocatalytic efficiency. The local electronic and atomic structure of the nanostructures are analyzed by X-ray absorption spectroscopy (XAS) measurements. The spectra confirm that the hollow shell has an anatase phase structure, slight lattice distortion, and variation in Ti 3d orbital orientation. In situ XAS measurements reveal that the existence of amorphous carbon nanospheres inside the nano spherical shell inhibit the recombination of electron-hole pairs; more mobile holes are formed in the p-d hybridized bands near the Fermi surface and enables the acceleration of the carries that significantly enhance the photodegradation of paracetamol under UV-visible irradiation. The observed charge transfer process from TiO2 hybridized orbital to the carbon nanospheres reduces the recombination rate of electrons and holes, thus increasing the photocatalytic efficiency.
Subject(s)
Carbon , Nanostructures , Photolysis , Carbon/chemistry , Acetaminophen , X-Ray Absorption Spectroscopy , Catalysis , Nanostructures/chemistryABSTRACT
In this paper, we introduced an order parameter, named the local structure similarity (LSS), to measure the resemblance of a cluster structure in a liquid with respect to a perfect crystal. The LSS is based on a dot product of two bond orientational order complex vectors, with one vector associated with a particle in a liquid and the other vector with a particle in a crystal. The calculation of the LSS should scan the entire space of the Euler angles determined by the two coordinate frames describing individually the liquid and the crystal. The effectiveness of the LSS was examined by solid-like clusters in a Lennard-Jones (LJ) system near its liquid-solid phase transition and at solid states below its melting point, where the thermodynamic states of the LJ system were obtained by simulation annealing. The LSS measure was utilized to scrutinize the fcc-like, hcp-like, and bcc-like clusters classified by criteria based on W4 and W6 order parameters. As indicated by our results, the two ways of classification are consistent for fcc-like and hcp-like clusters, which are in a close resemblance to their crystalline counterparts. However, the classification with positive W6 for bcc-like clusters is inconsistent with the results of the LSS measure, which was confirmed by clusters in a LJ system confined between two parallel slabs of particles in the bcc structure arrangement.
ABSTRACT
Salmonella serovar Kentucky is frequently isolated from chickens and dairy cattle, but recovery from humans is comparatively low based on the U.S. National Antimicrobial Resistance Monitoring System (NARMS) reports. We aimed to better describe the genetic diversity, antimicrobial resistance, and virulence determinants of Salmonella Kentucky isolates from humans, food animal ceca, retail meat and poultry products, imported foods and food products, and other samples. We analyzed the genomes of 774 Salmonella Kentucky isolates and found that 63% (54/86) of human isolates were sequence type (ST)198, 33% (29/86) were ST152, and 3.5% (3/86) were ST314. Ninety-one percent (570/629) of cecal isolates and retail meat and poultry isolates were ST152 or ST152-like (one allele difference), and 9.2% (58/629) were ST198. Isolates from imported food were mostly ST198 (60%, 22/37) and ST314 (29.7%, 11/37). ST198 isolates clustered into two main lineages. Clade ST198.2 comprised almost entirely isolates from humans and imported foods, all containing triple mutations in the quinolone resistance-determining region (QRDR) that confer resistance to fluoroquinolones. Clade ST198.1 contained isolates from humans, ceca, retail meat and poultry products, and imported foods that largely lacked QRDR mutations. ST152 isolates from cattle had a lineage (Clade 2) distinct from ST152 isolates from chicken (Clade 4), and half of ST152 human isolates clustered within two other clades (Clades 1 and 3), largely distinct from Clades 2 and 4. Although clinical illness associated with Salmonella Kentucky is low, ST198 appears to account for most human infections in the Unites States but is uncommon among ceca of domestic food animals and retail meat and poultry products. These findings, combined with human exposure data, suggest that fluoroquinolone-resistant ST198 infections may be linked to the consumption of food products that are imported or consumed while traveling. We also found unique differences in the composition of virulence genes and antimicrobial resistance genes among the clades, which may provide clues to the host specificity and pathogenicity of Salmonella Kentucky lineages.
Subject(s)
Anti-Bacterial Agents , Salmonella enterica , Animals , Anti-Bacterial Agents/pharmacology , Cattle , Chickens , Drug Resistance, Bacterial/genetics , Drug Resistance, Multiple, Bacterial/genetics , Genomics , Humans , Kentucky , Microbial Sensitivity Tests , Salmonella/genetics , Serogroup , United States , Virulence/geneticsABSTRACT
We report the preparation of hexagonal mesoporous silica from single-source giant surfactants constructed via dihydroxyl-functionlized polyhedral oligomeric silsesquioxane (DPOSS) heads and a polystyrene (PS) tail. After thermal annealing, the obtained well-ordered hexagonal hybrid was pyrolyzed to afford well-ordered mesoporous silica. A high porosity (e.g., 581 m2/g) and a uniform and narrow pore size distribution (e.g., 3.3 nm) were achieved. Mesoporous silica in diverse shapes and morphologies were achieved by processing the precursor. When the PS tail length was increased, the pore size expanded accordingly. Moreover, such pyrolyzed, ordered mesoporous silica can help to increase both efficiency and stability of nanocatalysts.
ABSTRACT
Reports of transmissible colistin resistance show the importance of comprehensive colistin resistance surveillance. Recently, a new allele of the mobile colistin resistance (mcr) gene family designated mcr-9, which shows variation in genetic context and colistin susceptibility, was reported. We tested over 100 Salmonella enterica and Escherichia coli isolates with mcr-9 from the National Antimicrobial Resistance Monitoring System (NARMS) in the United States for their susceptibility to colistin and found that every isolate was susceptible, with an MIC of ≤1 µg/ml. Long-read sequencing of 12 isolates revealed mcr-9 on IncHI plasmids that were either independent or integrated into the chromosome. Overall, these results demonstrate that caution is necessary when determining the clinical relevance of new resistance genes.
Subject(s)
Colistin , Drug Resistance, Bacterial , Escherichia coli Proteins , Anti-Bacterial Agents/pharmacology , Colistin/pharmacology , Drug Resistance, Bacterial/genetics , Escherichia coli/drug effects , Escherichia coli/genetics , Escherichia coli Proteins/genetics , Microbial Sensitivity Tests , Plasmids/genetics , Salmonella/drug effects , Salmonella/genetics , United StatesABSTRACT
Antimicrobial resistance (AMR) is a major public health problem that requires publicly available tools for rapid analysis. To identify AMR genes in whole-genome sequences, the National Center for Biotechnology Information (NCBI) has produced AMRFinder, a tool that identifies AMR genes using a high-quality curated AMR gene reference database. The Bacterial Antimicrobial Resistance Reference Gene Database consists of up-to-date gene nomenclature, a set of hidden Markov models (HMMs), and a curated protein family hierarchy. Currently, it contains 4,579 antimicrobial resistance proteins and more than 560 HMMs. Here, we describe AMRFinder and its associated database. To assess the predictive ability of AMRFinder, we measured the consistency between predicted AMR genotypes from AMRFinder and resistance phenotypes of 6,242 isolates from the National Antimicrobial Resistance Monitoring System (NARMS). This included 5,425 Salmonella enterica, 770 Campylobacter spp., and 47 Escherichia coli isolates phenotypically tested against various antimicrobial agents. Of 87,679 susceptibility tests performed, 98.4% were consistent with predictions. To assess the accuracy of AMRFinder, we compared its gene symbol output with that of a 2017 version of ResFinder, another publicly available resistance gene detection system. Most gene calls were identical, but there were 1,229 gene symbol differences (8.8%) between them, with differences due to both algorithmic differences and database composition. AMRFinder missed 16 loci that ResFinder found, while ResFinder missed 216 loci that AMRFinder identified. Based on these results, AMRFinder appears to be a highly accurate AMR gene detection system.
ABSTRACT
Objectives: To sequence the genomes and determine the genetic mechanisms for linezolid resistance identified in three strains of Enterococcus isolated from cattle and swine caecal contents as part of the US National Antimicrobial Resistance Monitoring System (NARMS) surveillance programme. Methods: Broth microdilution was used for in vitro antimicrobial susceptibility testing to assess linezolid resistance. Resistance mechanisms and plasmid types were identified from data generated by WGS on Illumina® and PacBio® platforms. Conjugation experiments were performed to determine whether identified mechanisms were transmissible. Results: Linezolid resistance plasmids containing optrA were identified in two Enterococcus faecalis isolates and one Enterococcus faecium. The E. faecium isolate also carried the linezolid resistance gene cfr on the same plasmid as optrA. The linezolid resistance plasmids had various combinations of additional resistance genes conferring resistance to phenicols (fexA), aminoglycosides [spc and aph(3')-III] and macrolides [erm(A) and erm(B)]. One of the plasmids was confirmed to be transmissible by conjugation, resulting in linezolid resistance in the transconjugant. Conclusions: To the best of our knowledge, this is the first identification of linezolid resistance in the USA in bacteria isolated from food animals. The oxazolidinone class of antibiotics is not used in food animals in the USA, but the genes responsible for resistance were identified on plasmids with other resistance markers, indicating that there may be co-selection for these plasmids due to the use of different antimicrobials. The transmissibility of one of the plasmids demonstrated the potential for linezolid resistance to spread horizontally. Additional surveillance is necessary to determine whether similar plasmids are present in human strains of Enterococcus.
Subject(s)
Anti-Bacterial Agents/pharmacology , Drug Resistance, Bacterial/genetics , Enterococcus faecalis/genetics , Enterococcus faecium/genetics , Meat Products/microbiology , Plasmids/genetics , Animals , Bacterial Typing Techniques , Cattle/microbiology , DNA, Bacterial/genetics , Enterococcus faecalis/drug effects , Enterococcus faecalis/isolation & purification , Enterococcus faecium/drug effects , Enterococcus faecium/isolation & purification , Genome, Bacterial , Linezolid/pharmacology , Microbial Sensitivity Tests , Multilocus Sequence Typing , Poultry/microbiology , RNA, Ribosomal, 23S/genetics , Swine/microbiology , United StatesABSTRACT
Whole genome sequencing (WGS) has become a rapid and affordable tool for public health surveillance and outbreak detection. In this study, we used the Illuminia MiSeq® to sequence 589 Campylobacter isolates obtained in 2015 from retail poultry meats as part of the National Antimicrobial Resistance Monitoring System (NARMS). WGS data were used to identify the Campylobacter species and to compare the concordance between resistance genotypes and phenotypes. WGS accurately identified 386 C. jejuni and 203 C. coli using gyrA sequence information. Ten resistance genes, including tetO, blaOXA-61, aph(2â³)-Ic, aph(2â³)-If, aph(2â³)-Ig, aph(3')-III, ant(6)-1a, aadE, aph(3")-VIIa, and Inu(C), plus mutations in housekeeping genes (gyrA at position 86, 23S rRNA at position 2074 and 2075), were identified by WGS analysis. Overall, there was a high concordance between phenotypic resistance to a given drug and the presence of known resistance genes. Concordance between both resistance and susceptible phenotypes and genotype was 100% for ciprofloxacin, nalidixic acid, gentamicin, azithromycin, and florfenicol. A few discrepancies were observed for tetracycline, clindamycin, and telithromycin. The concordance between resistance phenotype and genotype ranged from 67.9% to 100%; whereas, the concordance between susceptible phenotype and genotype ranged from 98.0% to 99.6%. Our study demonstrates that WGS can correctly identify Campylobacter species and predict antimicrobial resistance with a high degree of accuracy.
Subject(s)
Anti-Bacterial Agents/pharmacology , Campylobacter Infections/veterinary , Campylobacter/drug effects , Campylobacter/isolation & purification , Drug Resistance, Bacterial , Poultry Diseases/microbiology , Animals , Campylobacter/classification , Campylobacter/genetics , Campylobacter Infections/microbiology , Chickens/microbiology , Meat/microbiology , Microbial Sensitivity Tests , Phylogeny , Turkeys/microbiology , United States , Whole Genome SequencingABSTRACT
We demonstrate the guiding principles behind simple two dimensional self-assembly of MOF nanoparticles (NPs) and oleic acid capped iron oxide (Fe3 O4 ) NCs into a uniform two-dimensional bi-layered superstructure. This self-assembly process can be controlled by the energy of ligand-ligand interactions between surface ligands on Fe3 O4 NCs and Zr6 O4 (OH)4 (fumarate)6 MOF NPs. Scanning transmission electron microscopy (TEM)/energy-dispersive X-ray spectroscopy and TEM tomography confirm the hierarchical co-assembly of Fe3 O4 NCs with MOF NPs as ligand energies are manipulated to promote facile diffusion of the smaller NCs. First-principles calculations and event-driven molecular dynamics simulations indicate that the observed patterns are dictated by combination of ligand-surface and ligand-ligand interactions. This study opens a new avenue for design and self-assembly of MOFs and NCs into high surface area assemblies, mimicking the structure of supported catalyst architectures, and provides a thorough fundamental understanding of the self-assembly process, which could be a guide for designing functional materials with desired structure.
ABSTRACT
We sequenced the genomes of 10 Salmonella enterica serovar Infantis isolates containing blaCTX-M-65 obtained from chicken, cattle, and human sources collected between 2012 and 2015 in the United States through routine National Antimicrobial Resistance Monitoring System (NARMS) surveillance and product sampling programs. We also completely assembled the plasmids from four of the isolates. All isolates had a D87Y mutation in the gyrA gene and harbored between 7 and 10 resistance genes [aph(4)-Ia, aac(3)-IVa, aph(3')-Ic, blaCTX-M-65, fosA3, floR, dfrA14, sul1, tetA, aadA1] located in two distinct sites of a megaplasmid (â¼316 to 323 kb) similar to that described in a blaCTX-M-65-positive S Infantis isolate from a patient in Italy. High-quality single nucleotide polymorphism (hqSNP) analysis revealed that all U.S. isolates were closely related, separated by only 1 to 38 pairwise high-quality SNPs, indicating a high likelihood that strains from humans, chickens, and cattle recently evolved from a common ancestor. The U.S. isolates were genetically similar to the blaCTX-M-65-positive S Infantis isolate from Italy, with a separation of 34 to 47 SNPs. This is the first report of the blaCTX-M-65 gene and the pESI (plasmid for emerging S Infantis)-like megaplasmid from S Infantis in the United States, and it illustrates the importance of applying a global One Health human and animal perspective to combat antimicrobial resistance.
Subject(s)
Anti-Bacterial Agents/pharmacology , Salmonella enterica/drug effects , beta-Lactamases/metabolism , Animals , Cattle , Chickens , Food Microbiology , Humans , Microbial Sensitivity Tests , Polymorphism, Single Nucleotide/genetics , Salmonella enterica/enzymology , United States , beta-Lactamases/geneticsABSTRACT
Hierarchically assembled superstructures of block copolymers are discovered by introduction of the competition of anisotropy attributed from liquid crystalline ordering and nano-phase separation. When the two prototypical fields of liquid crystals (LCs), smectics (S) and nematics (N), are adjoined within the framework of diblock copolymers (S-N) in a variety of precisely tuned compositions, a novel class of superlattices with an interdigitated array of smectic layers between the nearest lamellae or cylinders are observed. This generates unconventional nano-phase separated orthorhombic (Lo) and pseudo-hexagonal (Ho) structures, where the stretched N tethers, projected regularly from the S layers, could transfer the local organization and guide the correlated assembly. This type of superstructure is highly frustrated in reversed cylindrical morphology and absent in S-coil diblock copolymers. The collective interplay of the S and N interactions with nano-phase separation induces the formation of the final complex yet equilibrium structures, providing unprecedented opportunities towards exquisite structural diversity.
ABSTRACT
Methicillin-resistant Staphylococcus aureus (MRSA) has been detected in retail meats, although large-scale studies are scarce. We conducted a one-year survey in 2010-2011 within the framework of the National Antimicrobial Resistance Monitoring System. Among 3520 retail meats collected from eight U.S. states, 982 (27.9%) contained S. aureus and 66 (1.9%) were positive for MRSA. Approximately 10.4% (107/1032) of S. aureus isolates, including 37.2% (29/78) of MRSA, were multidrug-resistant (MDRSA). Turkey had the highest MRSA prevalence (3.5%), followed by pork (1.9%), beef (1.7%), and chicken (0.3%). Whole-genome sequencing was performed for all 66 non-redundant MRSA. Among five multilocus sequence types identified, ST8 (72.7%) and ST5 (22.7%) were most common and livestock-associated MRSA ST398 was assigned to one pork isolate. Eleven spa types were represented, predominately t008 (43.9%) and t2031 (22.7%). All four types of meats harbored t008, whereas t2031 was recovered from turkey only. The majority of MRSA (84.8%) possessed SCCmec IV and 62.1% harbored Panton-Valentine leukocidin. Pulsed-field gel electrophoresis showed that all ST8 MRSA belonged to the predominant human epidemic clone USA300, and others included USA100 and USA200. We conclude that a diverse MRSA population was present in U.S. retail meats, albeit at low prevalence.
Subject(s)
Food Microbiology , Meat/microbiology , Methicillin-Resistant Staphylococcus aureus/genetics , Methicillin-Resistant Staphylococcus aureus/isolation & purification , Staphylococcus aureus/drug effects , Staphylococcus aureus/isolation & purification , Animals , Anti-Bacterial Agents/pharmacology , Bacterial Toxins/genetics , Cattle , Drug Resistance, Multiple, Bacterial , Exotoxins/genetics , Genes, Bacterial , Genome, Bacterial , Humans , Leukocidins/genetics , Methicillin-Resistant Staphylococcus aureus/classification , Methicillin-Resistant Staphylococcus aureus/drug effects , Microbial Sensitivity Tests , Multilocus Sequence Typing , Sequence Analysis, DNA , Staphylococcus aureus/classification , Swine , Turkey , United StatesABSTRACT
Two- and three-dimensional metallosupramolecules shaped like a Star of David were synthesized by the self-assembly of a tetratopic pyridyl ligand with a 180° diplatinum(II) motif and PdII ions, respectively. In contrast to other strategies, such as template-directed synthesis and stepwise self-assembly, this design enables the formation of 2D and 3D structures in one step and high yield. The structures were characterized by both one-dimensional (1 H, 13 C, 31 P) and two-dimensional (COSY, NOESY, DOSY) NMR spectroscopy, ESI-MS, ion-mobility mass spectrometry (IM-MS), AFM, and TEM. The stabilities of the 2D and 3D structures were measured and compared by gradient tandem mass spectrometry (gMS2 ). The high stability of the 3D Star of David was correlated to its high density of coordination sites (DOCS).
ABSTRACT
Although controlling the primary structure of synthetic polymers is itself a great challenge, the potential of sequence control for tailoring hierarchical structures remains to be exploited, especially in the creation of new and unconventional phases. A series of model amphiphilic chain-like giant molecules was designed and synthesized by interconnecting both hydrophobic and hydrophilic molecular nanoparticles in precisely defined sequence and composition to investigate their sequence-dependent phase structures. Not only compositional variation changed the self-assembled supramolecular phases, but also specific sequences induce unconventional phase formation, including Frank-Kasper phases. The formation mechanism was attributed to the conformational change driven by the collective hydrogen bonding and the sequence-mandated topology of the molecules. These results show that sequence control in synthetic polymers can have a dramatic impact on polymer properties and self-assembly.
ABSTRACT
Spontaneous formation of concentric lamellae was observed in self-assembling giant surfactants consisting of a fluorinated polyhedral oligomeric silsesquioxane (FPOSS) head and flexible polymer tail(s). Owing to the asymmetrical sizes of the head and tail blocks and the rectangular molecular interface, the giant surfactants assumed a truncated-wedge-like molecular shape, which induced morphological curvature during self-assembly, thus resulting in the formation of curved and concentric lamellae. These curved/concentric lamellae were observed in FPOSS-based giant surfactants with different architectures and compositions. The spontaneous curvature formation not only promotes our fundamental understanding of assembly principles, but also provides a promising and efficient approach to the fabrication of a wide range of high-performance devices.
ABSTRACT
We report the solution self-assembly of an ABC block terpolymer consisting of a polystyrene-block-poly(ethylene oxide) (PS-b-PEO) diblock copolymer tail tethered to a fluorinated polyhedral oligomeric silsesquioxane (FPOSS) cage in 1,4-dioxane/water. With increasing water content, abundant unconventional morphologies, including circular cylinders, two-dimensional hexagonally patterned colloidal nanosheets, and laterally patterned vesicles, are sequentially observed. The formation of toroids is dominated by two competing free energies: the end-cap energy of cylinders and the bending energy to form the circular structures. Incorporating the superhydrophobic FPOSS cages enhances the end-cap energy and promotes toroid formation. Lateral aggregation and fusion of the cylinders results in primitive nanosheets that are stabilized by the thicker rims to partially release the rim-cap energy. Rearrangement of the parallel-aligned FPOSS cylindrical cores generates hexagonally patterned nanosheets. Further increasing the water content induces the formation of vesicles with nanopatterned walls.
Subject(s)
Colloids/chemistry , Nanostructures/chemistry , Organosilicon Compounds/chemistry , Polyethylene Glycols/chemistry , Polystyrenes/chemistry , Dioxanes/chemistry , Halogenation , Nanostructures/ultrastructure , Solutions , Water/chemistryABSTRACT
Unconventional star-shaped liquid crystals (abbreviated as SiLCs) were successfully synthesized by chemically connecting four cyanobiphenyl anisotropic mesogens to the periphery of a super-hydrophobic and ultra-flexible cyclic tetramethyltetrasiloxane ring with flexible hexyl chains. Based on the combined experimental techniques of differential scanning calorimetry (DSC), cross-polarized optical microscopy (POM), solid-state carbon-13 ((13)C) nuclear magnetic resonance (NMR) spectroscopy and one-dimensional (1D) wide-angle X-ray diffraction (WAXD), it was found that the SiLC molecule exhibited the monotropic phase transition from a LC phase to a crystalline phase. The crystalline phase was only detected during slow heating processes above its glass transition temperature, while a LC phase was formed both during cooling and during heating processes. The hierarchical superstructures were identified from the structure-sensitive 2D WAXD of the macroscopically oriented SiLC film and confirmed by selected area electron diffraction (SAED) of the SiLC single crystals. The molecular packing symmetry in the monoclinic unit cell was further investigated by computer simulations on the real and reciprocal spaces. Macroscopically oriented SiLC hierarchical superstructures on the different length scales may provide the targeted physical properties, which can allow us to apply SiLC molecules in the fields of electro-optical devices and nonlinear optics.
ABSTRACT
Fullerene-based liquid crystalline materials have both the excellent optical and electrical properties of fullerene and the self-organization and external-field-responsive properties of liquid crystals (LCs). Herein, we demonstrate a new family of thermotropic [60]fullerene supramolecular LCs with hierarchical structures. The [60]fullerene dyads undergo self-organization driven by π-πâ interactions to form triple-layer two-dimensional (2D) fullerene crystals sandwiched between layers of alkyl chains. The lamellar packing of 2Dâ crystals gives rise to the formation of supramolecular LCs. This design strategy should be applicable to other molecules and lead to an enlarged family of 2Dâ crystals and supramolecular liquid crystals.