ABSTRACT
The Newtonian gravitational constant, G, is one of the most fundamental constants of nature, but we still do not have an accurate value for it. Despite two centuries of experimental effort, the value of G remains the least precisely known of the fundamental constants. A discrepancy of up to 0.05 per cent in recent determinations of G suggests that there may be undiscovered systematic errors in the various existing methods. One way to resolve this issue is to measure G using a number of methods that are unlikely to involve the same systematic effects. Here we report two independent determinations of G using torsion pendulum experiments with the time-of-swing method and the angular-acceleration-feedback method. We obtain G values of 6.674184 × 10-11 and 6.674484 × 10-11 cubic metres per kilogram per second squared, with relative standard uncertainties of 11.64 and 11.61 parts per million, respectively. These values have the smallest uncertainties reported until now, and both agree with the latest recommended value within two standard deviations.
ABSTRACT
Precise information of positions and sizes of atom clouds is required for atom-interferometry-based G measurements. In this work, characterizing atom clouds using a charge-coupled device (CCD) is presented. The parameters of atom clouds are extracted from fluorescence images captured by the CCD. For characterization, in-situ calibration of the magnification of the imaging system is implemented using the free-fall distance of atom clouds as the dimension reference. Moreover, influence of the probe beam on measuring the positions of atom clouds is investigated, and a differential measurement by reversing the direction of the probe beam is proposed to suppress the influence. Finally, precision at sub-mm level for characterizing atom clouds is achieved.
ABSTRACT
We present a matter wave gyroscope with a Sagnac area of 5.92 cm2, achieving a short-term sensitivity of 167 nrad/s/Hz1/2. The atom interferometry gyroscope is driven by a π/2 - π - π - π/2 Raman pulse sequence based on an atom fountain with a parabolic trajectory. The phase-locked laser beams for Raman transitions partly propagate outside of the vacuum chamber and expose to the air when passing through the two arms of the vacuum chamber. This configuration leads to the tilt of the laser's wave-front and suffers the fluctuation of air density. The impacts on both the fringe contrast and long-term stability are experimentally investigated in detail, and effective schemes are developed to improve the performance of our atom gyroscope. The method presented here could be useful for developing large atom interferometry facilities with separated vacuum chambers.
ABSTRACT
We report a test of the universality of free fall by comparing the gravity acceleration of the ^{87}Rb atoms in m_{F}=+1 versus those in m_{F}=-1, of which the corresponding spin orientations are opposite. A Mach-Zehnder-type atom interferometer is exploited to alternately measure the free fall acceleration of the atoms in these two magnetic sublevels, and the resultant Eötvös ratio is η_{S}=(0.2±1.2)×10^{-7}. This also gives an upper limit of 5.4×10^{-6} m^{-2} for a possible gradient field of the spacetime torsion. The interferometer using atoms in m_{F}=±1 is highly sensitive to the magnetic field inhomogeneity. A double differential measurement method is developed to alleviate the inhomogeneity influence, of which the effectiveness is validated by a magnetic field modulating experiment.
ABSTRACT
We present the investigation on the frequency-dependent amplification (FDA) of a tapered amplifier (TA) and the corresponding influence on Raman-type atom interferometers. In our interferometer, the output of two phase-locked diode lasers is injected into a TA to generate Raman beams. The frequency of one laser is chirped during the interfering process, which induces a variance of the Raman lasers power as a result of the FDA of the TA. The corresponding power ratio variation of the Raman lasers is measured by beat note method, which shows a linear dependence with a slope of -0.087(4)/GHz when the laser frequency changes over 2 GHz at 780 nm. The corresponding error related to AC Stark effect due to this frequency-dependent variation is estimated for our atom interferometer. The investigation presented here may provide hints for other experiments involving TAs.
ABSTRACT
A thrust stand is developed for testing micro-Newton level thrusters on the ground. The stand is composed of a compound pendulum that is symmetrically suspended by two thin beryllium copper strips, and it is precisely calibrated by gravity. The stiffness of the stand can be adjusted in 3 orders of magnitude by a counterweight. When the stiffness is larger than 1 Nm/rad, the stand demonstrates a fast response to thrust. The measured range of the stand reaches 1000 µN, and the noise is less than 0.1 µN/Hz within 1 mHz-1 Hz. To calibrate the resolution of the stand, an electrostatic force is applied to the stand with an actuator. The equivalent thrust is determined to be 0.09 µN with a standard uncertainty of 0.02 µN. Using the stand, a micro-Newton colloid thruster is tested. The output of the colloid thruster changes with the applied voltage as 0.015(1) µN/V. When changing the voltage by 50 V, the change in thrust is measured to be 0.7 µN with a standard uncertainty of 0.1 µN.
ABSTRACT
Vibration correction provides a simple and flexible method of suppressing ambient vibration noise in transportable atom gravimeters. However, in the seismometers used for vibration correction, a spurious output may be induced by the magnetic field of the magnetic-optical trap, introducing errors to the gravity measurements. This paper evaluates the influence of the magnetic field on the seismometer and the corresponding errors in the gravity measurements. It is found that an error level of order 10 µGal may be present if the seismometer is not configured carefully. The dependence of the influence on the orientation of the seismometer and the lasting time of the magnetic field are investigated. The effective suppression of the influence by shielding the seismometer is also demonstrated. Our results focus attention on the possible errors related to seismometers in high-precision gravity measurements by using atom gravimeters.
ABSTRACT
The accuracy of atom gravimeters is directly related to the Raman laser, which is used to manipulate the atomic wave packet, and the frequency of the Raman laser could be affected by temperature when the laser polarization is not along the preferred axis of the electro-optic crystal employed in the modulation transfer spectrum (MTS). This effect has been researched by modulating the laser polarization in the MTS in this work. The experimental results show that both the laser frequency and gravity measurement results have a sinusoidal dependence on temperature, and the period of the fluctuation is 0.8 °C. The systematic effect can reach 12.4 µGal when the polarization misalignment is 15°, which is a remarkable contribution to the absolute gravity measurement. The amplitude of this effect could be reduced by adjusting the laser polarization to the crystal's preferred axis. According to the result, the included angle between the laser polarization and the crystal's preferred axis should be smaller than 5° if 2 µGal accuracy is required.
ABSTRACT
As part of a program to determine the gravitational constant G using multiple independent methods in the same laboratory, an atom gravity gradiometer is being developed. The gradiometer is designed with two magneto-optical traps to ensure both the fast simultaneous launch of two atomic clouds and an optimized configuration of source masses. Here, the design of the G measurement by atom interferometry is detailed, and the experimental setup of the atom gravity gradiometer is reported. A preliminary sensitivity of 3 × 10-9 g/Hz to differential gravity acceleration is obtained, which corresponds to 99 E/Hz (1 E = 10-9 s-2) for the gradiometer with a baseline of 0.3 m. This provides access to measuring G at the level of less than 200 parts per million in the first experimental stage.
ABSTRACT
As the existence of the gravity gradient, the output of gravimeters is actually the gravitational acceleration at the reference instrumental height. Precise knowledge of the reference height is indispensable in the utilization of gravity measurements, especially for absolute gravimeters. Here, we present an interferometric method to measure the distance between the atomic cloud and a reflecting mirror directly, which consequently determines the reference height of our atom gravimeter. This interferometric method is based on a frequency jump of Raman lasers applied at the π pulse of the atom interferometer, which induces an additional phase shift proportional to the interested distance. An uncertainty of 2 mm is achieved here for the distance measurement, and the effect of the gravity gradient on absolute gravity measurements can thus be constrained within 1 µGal. This work provides a concrete-object-based measurement of the reference height for atom gravimeters.
ABSTRACT
The Newtonian gravitational constant G, which is one of the most important fundamental physical constants in nature, plays a significant role in the fields of theoretical physics, geophysics, astrophysics and astronomy. Although G was the first physical constant to be introduced in the history of science, it is considered to be one of the most difficult to measure accurately so far. Over the past two decades, eleven precision measurements of the gravitational constant have been performed, and the latest recommended value for G published by the Committee on Data for Science and Technology (CODATA) is (6.674 08 ± 0.000 31) × 10-11 m3 kg-1 s-2 with a relative uncertainty of 47 parts per million. This uncertainty is the smallest compared with previous CODATA recommended values of G; however, it remains a relatively large uncertainty among other fundamental physical constants. In this paper we briefly review the history of the G measurement, and introduce eleven values of G adopted in CODATA 2014 after 2000 and our latest two values published in 2018 using two independent methods.
ABSTRACT
A compact laser system for a portable 87Rb atom interferometry gravimeter has been demonstrated in this work. This laser system is based on frequency doubling of a single seed laser at the wavelength of 1560 nm. The frequency of the seed laser is controlled by a digital unit with an analog feedback circuit. By using this frequency control method, the frequency of the laser system can be shifted over 1 GHz. Based on this method, the Raman frequency can be locked on the F = 3 â F' = 4 transition of 85Rb atoms. Moreover, the Raman sideband and the repumping laser are generated by a phase modulator, and it can generate different laser frequencies to meet the requirements of a typical atom interferometer. Additional sidebands in the Raman beam produced from the phase modulator are optimized and reduced, allowing us to observe atom interference with a free evolution time of 320 ms. The control unit including the laser system has been integrated into a box with a volume of 1.5 m × 0.6 m × 0.6 m, and the weight of which is only 150 kg. Using this compact optical scheme, our atomic gravimeter has achieved a sensitivity of 53 µGal/Hz1/2 and a resolution of better than 1 µGal (1 µGal = 1 × 10-8 m/s2) in an integration time of 3000 s.
ABSTRACT
The vibration isolator usually plays an important role in atom interferometry gravimeters to improve their sensitivity. We show that the parasitic forced vibration of the Raman mirror, which is induced by external forces acting on the vibration isolator, can cause a bias in atom gravimeters. The mechanism of how this effect induces an additional phase shift in our interferometer is analyzed. Moreover, modulation experiments are performed to measure the dominant part of this effect, which is caused by the magnetic force between the passive vibration isolator and the coil of the magneto-optic trap. In our current apparatus, this forced vibration contributes a systematic error of -2.3(2) × 10-7 m/s2 when the vibration isolator works in the passive isolation mode. Even suppressed with an active vibration isolator, this effect can still contribute -6(1) × 10-8 m/s2; thus, it should be carefully considered in precision atom gravimeters.
ABSTRACT
During gravity measurements with Raman type atom interferometry, the frequency of the laser used to drive Raman transition is scanned by chirping the frequency of a direct digital synthesizer (DDS), and the local gravity is determined by precisely measuring the chip rate α of DDS. We present an effective method that can directly evaluate the frequency chirp rate stability of our DDS. By mixing a pair of synchronous linear sweeping signals, the chirp rate fluctuation is precisely measured with a frequency counter. The measurement result shows that the relative α instability can reach 5.7 × 10(-11) in 1 s, which is neglectable in a 10(-9) g level atom interferometry gravimeter.
ABSTRACT
An ultra-low frequency active vibration isolator, simultaneously suppressing three-dimensional vibration noise, is demonstrated experimentally. The equivalent natural period of the isolator is 100 s and 12 s for the vertical and horizontal direction, respectively. The vibration noise in the vertical direction is about 50 times reduced during 0.2 and 2 Hz, and 5 times reduced in the other two orthogonal directions in the same frequency range. This isolator is designed for atom gravimeters, especially suitable for the gravimeter whose sensitivity is limited by vibration couplings.
ABSTRACT
We review the G measurements with time-of-swing method at HUST. Two independent experiments have been completed and an improved experiment is in progress. The first G value was determined as 6.6699(7)×10-11 m3 kg-1 s-2 with a relative standard uncertainty (ur) of 105 ppm by using a long period torsion pendulum and two cylindrical source masses. Later, this result was corrected to be 6.6723(9)×10-11 m3 kg-1 s-2 with ur=130 ppm after considering the density distribution of the cylinders and the air buoyancy, which was 360 ppm larger than the previous value. In 2009, a new experiment by using a simple block pendulum and spherical source masses with more homogeneous density was carried out. A series of improvements were performed, and the G value was determined to be 6.67349(18)×10-11 m3 kg-1 s-2 with ur=26 ppm. To reduce the anelasticity of the torsion fibre, fused silica fibres with Q's of approximately 5×104 are used to measure G in the ongoing experiment. These fibres are coated with thin layers of germanium and bismuth in turn to reduce the electrostatic effect. Some other improvements include the gravity compensation, reduction of the coating layer effect, etc. The prospective uncertainty of the next G value is 20 ppm or lower.
ABSTRACT
A rotating torsion balance method is used to detect the product of the photon mass squared and the ambient cosmic vector potential A(e). The signal is modulated by rotating the torsion balance to ensure the effectiveness of detection for all possible orientations of the vector potential. The influences of sidereal disturbances of environment are also removed by virtue of this modulation method. The experimental result shows micro (2)(gamma)A(e)<1.1 x 10(-11) T m/m(2), with micro (-1)(gamma) as the characteristic length associated with photon mass. If the ambient cosmic vector potential A(e) is 10(12) T m due to cluster level fields, we obtain a new upper limit on photon mass of 1.2 x 10(-51) g.