Unveiling microplastics pollution in a subtropical rural recreational lake: A novel insight.

While global attention has been primarily focused on the occurrence and persistence of microplastics (MP) in urban lakes, relatively little attention has been paid to the problem of MP pollution in rural recreational lakes. This pioneering study aims to shed light on MP size, composition, abundance, spatial distribution, and contributing factors in a rural recreational lake, 'Nikli Lake' in Kishoreganj, Bangladesh. Using density separation, MPs were extracted from 30 water and 30 sediment samples taken from ten different locations in the lake. Subsequent characterization was carried out using a combination of techniques, including a stereomicroscope, Fourier transform infrared spectroscopy (FTIR) and field emission scanning electron microscopy (FE-SEM). The results showed a significant prevalence of MPs in all samples, with an average amount of 109.667 ± 10.892 pieces/kg3 (dw) in the sediment and 98.167 ± 12.849 pieces/m3 in the water. Small MPs (<0.5 mm), fragments and transparent colored particles formed the majority, accounting for 80.2%, 64.5% and 55.3% in water and 78.9%, 66.4% and 64.3% in sediment, respectively. In line with global trends, polypropylene (PP) (53%) and polyethylene (PE) (43%) emerged as the predominant polymers within the MPs. MP contents in water and sediment showed positive correlations with outflow, while they correlated negatively with inflow and lake depth (p > 0.05). Local activities such as the discharge of domestic sewage, fishing waste and agricultural runoff significantly influence the distribution of polypropylene. Assessment of pollution factor, pollution risk index and pollution load index values at the sampling sites confirmed the presence of MPs, with values above 1. This study is a baseline database that provides a comprehensive understanding of MP pollution in the freshwater ecosystem of Bangladesh, particularly in a rural recreational lake. A crucial next step is to explore ecotoxicological mechanisms, legislative measures and future research challenges triggered by MP pollution.

A mini-review on plasticrusts: occurrence, current trends, potential threats, and recommendations for coastal sustainability.

Plasticrusts manifest as a coating on intertidal rocks due to environmental exposure. They refer to crushed plastic debris that blankets rocks found along intertidal shorelines. This study significantly contributes to a better understanding of the occurrence of these novel plastic formations, shedding light on their potential pathways of formation during the Anthropocene era. The research provides comprehensive insights into the composition, origins, challenges, and effective management strategies for removing coastal plastic litter. The findings of this investigation offer valuable evidence regarding the formation and impact of these recently discovered plastic items in coastal regions, prompting discussions about their formation processes and their effects on the marine ecosystem. Recognizing that these newly emerged plastic litter pose a considerable threat to the marine environment is crucial. With their emergence, we face an environmental challenge, especially concerning the health of coastal ecosystems. Plasticrusts, when degraded, can release microplastics (MPs) and nanoparticles (NPs) into the surrounding environment. These micro- and nano-sized plastic particles pose significant ecological risks as they persist in ecosystems, potentially harming wildlife and entering the food chain, causing widespread environmental contamination. Significantly, it outlines strategies to minimize the impact of this emerging plastic debris and its source.

Natural and anthropogenic contributions to the elemental compositions and subsequent ecological consequences of a transboundary river's sediments (Punarbhaba, Bangladesh).

An anthropogenically less affected transboundary river (Punarbhaba, Bangladesh) was studied to detect associated risks from the combined origin(s) of geochemically and toxicologically significant elements in benthic sediments. A total of 30 river bed sediments were analyzed by instrumental neutron activation analysis targeting the 15 chemical elements viz., Na, Al, K, Ti, Cr, Mn, Co, Zn, As, Rb, Sb, Cs, Ba, Th, and U. Among the estimated elements, the mean abundances (µg/g) of Rb (136), Sb (0.66), Cs (6.66), Th (14.6), and U (3.92) were 1.4-1.7 times higher than the crustal origin. These elements are primarily responsible for the contaminated state of the Punarbhaba River. The studied area is 'moderately polluted' (Igeo: 2.01 to 0.02) and possesses 'minor enrichment' (EF: 1.98 to 0.48) in terms of the measured elements. The output of statistical analyses projected that the studied elements are geochemically fractionated in an oxidizing environment (U/Th = 0.44) and mostly originated from felsic sources, thus confirming the mineral is comprised of aluminosilicates and alkali feldspar. However, SQGs-based and ecological risk indices invoked minor (Cr: 6.67%) to no potential ecotoxicological threats for Cr, Mn, Co, Zn, As, and Sb. Nonetheless, altered distribution patterns caused by geogenic activities increased Cr and Zn in the environment which may cause toxicity (Cr: 22-53%, Zn: 35-70%), and pose potential ecological risks, specifically in upstream locations (P-2, P-3, P-5). Further, this study broadened the perspective of sediment deposition from fractionation, fluvial transportation, and weathering events beyond the industrial disintegration of elements, which will aid researchers and policymakers to comprehend combined risks from suspended sediments.

Structural, mechanical, electronic and optical properties of N-decorated single-walled silicon carbide nanotube photocatalyst for hydrogen evolution via water splitting: a DFT study.

This work investigates the fundamental photocatalytic properties of nitrogen-doped single-walled silicon carbide nanotubes (N-doped SWSiCNTs) for hydrogen evolution for the first time. Investigations of the structural, mechanical, electronic, and optical properties of the studied systems were carried out using popular density functional theory implemented in quantum ESPRESSO and Yambo codes. Analysis of the structural properties revealed high mechanical stability with the 3.6% and 7.4% N-doped SWSiCNT. The calculated band gap of the N-doped SWSiCNT with 3.6% demonstrated a value of 2.56 eV which is within the photocatalytic range of 2.3 eV-2.8 eV. The hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) potentials of the 3.6% N-doped SWSiCNT also showed good agreement with previous theoretical data. The studied material showed the best photocatalytic performance in both parallel and perpendicular directions by absorbing photons in the visible region. Therefore, the observed structural, mechanical, electronic and optical behaviors demonstrated by the 3.6% N-doped SWSiCNT exposed it as a better photocatalyst for hydrogen production under visible light.

Development of Capillary Zone Electrophoresis Method for the Simultaneous Separation and Quantification of Metformin and Pioglitazone in Dosage Forms; and Comparison with HPLC Method.

A capillary zone electrophoretic (CZE) method was developed, validated, and applied for the assay of metformin (MET) and pioglitazone (PIO) in pharmaceutical formulations. The optimum running buffer composition was found to be 75 mmol/L phosphate buffer containing 30% acetonitrile (ACN) at pH 4.0. The optimum instrumental conditions were found to be injection time, 10 s; applied voltage, 25 kV; hydrodynamic injection pressure, 0.5 psi for 10 s, capillary temperature, 25 °C; and the detection wavelength, 210 nm. The quantifications were calculated based on the ratio of the peak areas of analytes to atenolol as an internal standard. The CZE method was validated in terms of accuracy (98.21-104.81%), intra- and inter-day precision of migration time and peak area (relative standard deviation ≤ 5%), linearity (correlation coefficients ≥ 0.9985), limit of detection (≤0.277 µg/mL), and limit of quantitation (≤0.315 µg/mL). The proposed method was applied for the analysis of PIO and MET both individually and in a combined dosage tablet formulation. All electrophoretic parameters were calculated and evaluated. A previously reported high-performance liquid chromatographic (HPLC) method was also applied to the same samples. A comprehensive comparison was then carried out for the analytical features of both methods CZE and HPLC. Comparable results were obtained with the advantage of reagent consumption and separation efficiency of CZE over HPLC and shorter analysis time by HPLC compared with CZE.

An integrated overview of metals contamination, source-specific risks investigation in coal mining vicinity soils.

Heavy metals in soil are harmful to natural biodiversity and human health, and it is difficult to estimate the effects accurately. To reduce pollution and manage risk in coal-mining regions, it is essential to evaluate risks for heavy metals in soil. The present study reviews the levels of 21 metals (Nb, Zr, Ag, Ni, Na, K, Mg, Rb, Zn, Ca, Sr, As, Cr, Fe, Pb, Cd, Co, Hg, Cu, Mn and Ti) in soils around Barapukuria coal-mining vicinity, Bangladesh which were reported in literature. An integrated approach for risk assessments with the positive matrix factorization (PMF) model, source-oriented ecological and health hazards were applied for the study. The contents of Rb, Ca, Zn, Pb, As, Ti, Mn, Co, Ag, Zr, and Nb were 1.63, 1.10, 1.97, 14.12, 1.20, 3.13, 1.22, 3.05, 3.85, 5.48, and 7.21 times greater than shale value. About 37%, 67%, 12%, and 85% of sampling sites posed higher risks according to the modified contamination factor, Nemerow pollution index, Nemerow integrated risk index, and mean effect range median quotient, respectively. Five probable metal sources were computed, including industrial activities to coal mining (17%), agricultural activities (33%), atmospheric deposition (19%), traffic emission (16%), and natural sources (15%). Modified Nemerow integrated risk index reported that agricultural activities, industrial coal mining activities, and atmospheric deposition showed moderate risk. Health hazards revealed that cancer risk values computed by the PMF-HHR model with identified sources were higher than the standard value (1.0E-04) for children, adult male, and female. Agricultural activities showed higher cancer risks to adult male (39%) and children (32%) whereas traffic emission contributed to female (25%). These findings highlight the ecological and health issues connected to potential sources of metal contamination and provide useful information to policymakers on how to reduce such risks.

A review on radionuclide pollution in global soils with environmental and health hazards evaluation.

Human populations are being exposed to a wide spectrum of radiation from soils as a result of the availability of radiation sources. Assessing the ecological and health effects of radionuclides in soils is crucial to support the optimal soil management practices but large-scale studies are limited. This study compiled data on radionuclides (226Ra, 232Th, 40K, 238U, and 137Cs) in soils located across the world (44 countries and 159 places) between 2008 and 2022 and applied radiological hazards indices and several multivariate statistical approaches. The average activity concentration (Bq/kg) of 226Ra, 232Th, 40K, 238U, and 137Cs were 408.56, 144.80, 508.78, 532.78, and 83.12, respectively, whereas 226Ra, 232Th, 40K, and 238U exceeded the standard limits. The principal component analysis explained more than 91% of variation in soils. Based on the geoaccumulation index, 40K posed moderately to heavy contamination whereas 238U and 226Ra posed moderate contamination in soils. Moreover, the mean values of radiological hazards evaluation such as radium equivalent activity (487.17 Bq/kg), external radiation hazard indices (1.32), internal hazard indices (2.15), absorbed dose rate (247.86 nGyh-1), annual effective dose rate (1.82 mSvy-1), activity utilization index (4.54) and excess lifetime cancer risk (63.84 × 10-4) were higher than recommended limit suggesting significant radiological risks in study region soils. The findings indicated that the study area soils were contaminated by radionuclides and unsafe for hazards in terms of the health risks linked with studied radioactive contents. The study is valuable for mapping radioactivity across the globe to determine the level of radioactivity hazards.

Source-oriented risks apportionment of toxic metals in river sediments of Bangladesh: a national wide application of PMF model and pollution indices.

Intense human activities, particularly industrial and agricultural output, has enriched metal(loid)s in riverine sediment and endangered aquatic ecosystems and human health. Promoting proper river management requires an assessment of the possible ecological hazards and pollution posed by metal(loid)s in sediments. However, there are limited large-scale risk assessments of metal(loid)s contamination in riverine sediment in heavily populated nations like Bangladesh. This study compiled data on sediment metal(loid)s, for example, Cd, As, Cu, Ni, Cr, Pb, Mn, and Zn, from 24 major rivers located across Bangladesh between 2011 and 2022 and applied positive matrix factorization (PMF) to identify the critical metal(loid)s sources and PMF model-based ecological risks. Based on studied metal(loid)s, 12-78% of rivers posed higher contents than the upper continental crust and 8% of the river sediments for Cr and Ni, whereas 4% for Cd and As exceeded probable effect concentration. Cr and Ni in the sum of toxic units (STU), whereas Mn, As and Cd in potential ecological risk (PER) posed the highest contribution to contaminate sediments. In the studied rivers, sediment contaminant Mn derived from natural sources; Zn and Ni originated from mixed sources; Cr and Cu were released from the tannery and industrial emissions and Cd originated from agricultural practices. Source-based PER and NIRI indicated that mixed source (4% rivers) and tannery and industrial emission (4% rivers) posed very high risks in sediments. For the creation of macroscale policies and the restoration of contaminated rivers, our national-scale comprehensive study offers helpful references.

Heavy metals contamination, receptor model-based sources identification, sources-specific ecological and health risks in road dust of a highly developed city.

The present study quantified Ni, Cu, Cr, Pb, Cd, As, Zn, and Fe levels in road dust collected from a variety of sites in Tangail, Bangladesh. The goal of this study was to use a matrix factorization model to identify the specific origin of these components and to evaluate the ecological and health hazards associated with each potential origin. The inductively coupled plasma mass spectrometry was used to determine the concentrations of Cu, Ni, Cr, Pb, As, Zn, Cd, and Fe. The average concentrations of these elements were found to be 30.77 ± 8.80, 25.17 ± 6.78, 39.49 ± 12.53, 28.74 ± 7.84, 1.90 ± 0.79, 158.30 ± 28.25, 2.42 ± 0.69, and 18,185.53 ± 4215.61 mg/kg, respectively. Compared to the top continental crust, the mean values of Cu, Pb, Zn, and Cd were 1.09, 1.69, 2.36, and 26.88 times higher, respectively. According to the Nemerow integrated pollution index (NIPI), pollution load index (PLI), Nemerow integrated risk index (NIRI), and potential ecological risk (PER), 84%, 42%, 30%, and 16% of sampling areas, respectively, which possessed severe contamination. PMF model revealed that Cu (43%), Fe (69.3%), and Cd (69.2%) were mainly released from mixed sources, natural sources, and traffic emission, respectively. Traffic emission posed high and moderate risks for modified NIRI and potential ecological risks. The calculated PMF model-based health hazards indicated that the cancer risk value for traffic emission, natural, and mixed sources had been greater than (1.0E-04), indicating probable cancer risks and that traffic emission posed 38% risk to adult males where 37% for both adult females and children.

A review on toxic metal pollution and source-oriented risk apportionment in road dust of a highly polluted megacity in Bangladesh.

Heavy metal enrichment in road dust has resulted from intensive anthropogenic activity, particularly urbanization, industrial activities and traffic emission, posing a hazard to urban ecosystems and human health. To promote optimal road dust management in urban environments, it is necessary to assess the possible ecological and health impact of toxic elements in road dust. In a heavily populated megacity like Dhaka, Bangladesh, large-scale risk assessments of contamination in road dust with heavy metals are limited. The present study aims at presenting a concentration of twenty-five metals in road dust (Na, K, Cs, Rb, Mg, Ca, Sr, Ba, Al, Zn, Cd, Pb, As, Sb, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zr and W) in Dhaka megacity. We used a critical source-based positive matrix factorization model, source-oriented potential ecological risks and health risks. Out of the studied metals, Na, Ca, Zn, Cd, Cu, Zr and W exceeded the shale value. About 73%, 48%, 29% and 32% of sampling sites showed a higher level of pollution based on PLI, NIPI, PER and NIRI, respectively. PMF model identified that Cd (85.3%), Cr (62.4%), Ni (58.2%), Zn (81.8%) and Mn (65.9%) in road dust were primarily attributed to traffic emission, fuel combustion, metal processing, transport sources and natural sources, respectively. Fuel combustion and metal processing posed considerable and high risks based on modified potential ecological risk and NIRI. Based on health hazards, traffic emission posed a high cancer risk in adult males (29%), whereas transport sources contributed to females (21%) and children (23%).

Perception and legacy of soil chromium and lead contamination in an operational small-scale coal mining community.

Operational small-scale coal mining (OSCM) is one of the most significant sources of chromium (Cr) and lead (Pb) pollution in Bangladesh. Attempts to minimize or lessen the use of Cr and Pb in OSCM have shown unsatisfactory results, mainly because they need to address the sociotechnical complexity of pollution concerns in OSCM. This research adopts a multidisciplinary, sociotechnical approach to addressing Cr and Pb problems, coupling soil sampling for Cr and Pb with questionnaires of miners' and inhabitants' perceptions of pollution and its distribution. The study was undertaken in the Barapukuria coal basin in northwest Bangladesh. Except for mining areas (average of 49.80 ± 27.25 mg/kg), Cr levels in soils exceeded the world average in the periphery (73.34 ± 24.39 mg/kg, ~ 1.2 times) and residential areas (88.85 ± 35.87 mg/kg, 1.5 times the world standard of 59.5 mg/kg). Pb levels in soils exceeded national and global averages in mining (53.56 ± 37.62 mg/kg, ~ 1.9 times), periphery (35.05 ± 21.77 mg/kg, ~ 1.3 times), and residential areas (32.14 ± 26.59 mg/kg, ~ 1.2 times) when compared to Bangladesh and global standards of 20 and 27 mg/kg. Pb levels were highest in mining areas, while Cr concentrations were highest in residential areas. The questionnaire findings indicated that miners and inhabitants did not correctly assume that the highest levels of Cr and Pb pollution would be found in these areas. Among all respondents, 54% are unaware of the health impacts of prolonged Cr and Pb exposure. They face respiratory problems (38.6%), skin diseases (32.7%), and other health issues. A large number of people (66.6%) agreed with the fact that Cr and Pb contamination has an impact on drinking water. Cr and Pb pollution has caused 40% crop loss and a 36% decrease in productivity in the agricultural sector. However, respondents underestimated the level of Cr pollution in mining areas, and most assumed that only individuals working directly with mines were impacted by the Cr and Pb content. Participants also rated the reduction of Cr and Pb contamination as of low importance. There is less awareness of Cr and Pb pollution among miners and inhabitants. Sincere efforts to reduce Cr and Pb pollution will likely be met with extra attention and hostility.

Reconciling the geogenic and non-crustal origins of elements in an Indo-Bangla transboundary river, Atrai: Pollution status, sediment quality, and preliminary risk assessment.

This study has been conducted on an anthropogenically less influenced transboundary river (Atrai: Indo-Bangladesh) to comprehend the inherent geochemistry and identify potential elemental sources. In doing so, across the Bangladeshi portion, 30 river-bed samples were culled and studied by neutron activation analysis to quantify the abundances of 15 geochemically and toxicologically significant elementals (Na, Al, K, Ti, Cr, Mn, Co, Zn, As, Rb, Sb, Cs, Ba, Th, and U). The results revealed that the mean concentrations (µg/g) of Rb (154.6), Cs (7.53), Th (20.90), and U (4.88) were 1.5-2.0 times higher than crustal values. Besides, geo-environmental indices revealed 'uncontaminated to moderately contaminated' pollution status with minor enrichment or contamination for Rb, Th, Sb, U, and Cs, relatively concentrated in the mid-to-downstream zone possessed geogenic and non-crustal origins. The positive matrix factorization and other statistical approaches revealed predominant geogenic enrichment of Na, K, Al, Ti, Zn, Cs, Rb, As, Th, and U from differential mineralogical compositions via weathering, elemental fractionations, and biogeochemical mobilization. Contrariwise, several anthropogenic sources (for Cr, Sb, Co, Mn, Th) were also ascertained in the vicinity of Atari River. However, sediment characterization based on SQG threshold values manifested that Cr and Mn possess rare biological effects on local aquatic organisms. Nevertheless, SQGs-based and ecological risk indices invoked minor to no potential ecotoxicological intimidations for the considered metal(oid)s (Cr, Mn, Co, Zn, As, and Sb). Hence, this study manifested the usefulness of a less anthropogenically affected river to reckon geogenic and non-crustal elemental origins in the compounded riverine sediment.

The status of natural radioactivity in Nigerian environments.

Proper documentation of baseline radiation data of different environments is an important step toward adequate environmental monitoring, and it provides quick means to quantitatively check and determine possible radionuclide contamination by anthropogenic sources. Besides, such documentation is useful for decision making processes, assessment of dose rates to the public, epidemiological studies, and environmental regulations. This review summarizes the results of studies conducted on radioactivity in Nigerian environments. For most soil samples, the levels of radioactivity are well within the world averages of 33, 45, and 420 Bq kg-1 for 226Ra, 232Th and 40K, respectively. Other soil samples from regions such as Abeokuta in the southwest, and Jos in the northcentral have been described as high background radiation areas with radioactivity values comparable with those obtained from known high background radiation areas such as the Odisha (formerly Orissa) coast in India (with values reported as 350, 2,825, and 180 Bq kg-1 for 238U/226Ra, 232Th, and 40K, respectively). In some parts of Nigeria, surface and underground water sources used for drinking and other purposes also present elevated levels of 226Ra above the world range of 0.01 to 0.1 Bq l-1 and the tolerable levels recommended by the World Health Organization and U.S. Environmental Protection Agency. Corresponding radiation doses due to measured radioactivities from different environments were estimated and compared with those reported in similar studies around the world. More so, the human and environmental health hazards that might be associated with the reported radioactivity in different environmental settings are discussed. The present report is expected to support authorities in developing appropriate regulations to protect the public from radiation exposure arising from environmental radioactivity. The report also examines other areas of consideration for future studies to ensure adequate radiation monitoring in Nigeria.

The Multifunctional Role of Herbal Products in the Management of Diabetes and Obesity: A Comprehensive Review.

Obesity and diabetes are the most demanding health problems today, and their prevalence, as well as comorbidities, is on the rise all over the world. As time goes on, both are becoming big issues that have a big impact on people's lives. Diabetes is a metabolic and endocrine illness set apart by hyperglycemia and glucose narrow-mindedness because of insulin opposition. Heftiness is a typical, complex, and developing overall wellbeing worry that has for quite some time been connected to significant medical issues in individuals, all things considered. Because of the wide variety and low adverse effects, herbal products are an important hotspot for drug development. Synthetic compounds are not structurally diverse and lack drug-likeness properties. Thus, it is basic to keep on exploring herbal products as possible wellsprings of novel drugs. We conducted this review of the literature by searching Scopus, Science Direct, Elsevier, PubMed, and Web of Science databases. From 1990 until October 2021, research reports, review articles, and original research articles in English are presented. It provides top to bottom data and an examination of plant-inferred compounds that might be utilized against heftiness or potentially hostile to diabetes treatments. Our expanded comprehension of the systems of activity of phytogenic compounds, as an extra examination, could prompt the advancement of remedial methodologies for metabolic diseases. In clinical trials, a huge number of these food kinds or restorative plants, as well as their bioactive compounds, have been shown to be beneficial in the treatment of obesity.

Trace element speciation in sludge: a preliminary study to assess contamination levels in the sewage network.

The spreading of sewage sludge from wastewater treatment plants and various industries arouses the growing interest due to the contamination by trace elements. Sludges were collected from one sewage treatment plant and two industries in Dhaka City, Bangladesh to assess physicochemical parameters and total and fraction content of trace elements like Cr, Ni, Cu, As, Cd, Pb, Fe, Mn and Zn in sludges. We evaluated the bioavailability of theses metals by determining their speciation by sequential extraction, each metal being distributed among five fractions: exchangeable fraction, bound to carbonate fraction, Fe-Mn oxide bound fraction, organic matter bound fraction and residual fractions. We found that all the analyzed sludges had satisfactory properties from an agronomic quality point of view. The average concentration (mg/kg) of trace metals in sludge samples were in the following decreasing order Fe (12807) > Cr (200) > Mn (158) > Zn (132) > Cu (68.2) > Ni (42.5) > Pb (36.4) > As (35.1) > Cd (3.7). The results of the sequential extraction showed that Cr, Ni, Cu, Fe and Mn were largely associated with the residual fraction where As, Cd and Pb was dominantly associated with the exchangeable and carbonate bound fractions and Zn showed a considerable proportion in carbonate bound fraction. These results showed that regulations must take into account the bioavailability with regard to the characteristics of the agricultural soils on which sludge will be spread.

Natural Bioactive Molecules: An Alternative Approach to the Treatment and Control of COVID-19.

Several coronaviruses (CoVs) have been associated with serious health hazards in recent decades, resulting in the deaths of thousands around the globe. The recent coronavirus pandemic has emphasized the importance of discovering novel and effective antiviral medicines as quickly as possible to prevent more loss of human lives. Positive-sense RNA viruses with group spikes protruding from their surfaces and an abnormally large RNA genome enclose CoVs. CoVs have already been related to a range of respiratory infectious diseases possibly fatal to humans, such as MERS, SARS, and the current COVID-19 outbreak. As a result, effective prevention, treatment, and medications against human coronavirus (HCoV) is urgently needed. In recent years, many natural substances have been discovered with a variety of biological significance, including antiviral properties. Throughout this work, we reviewed a wide range of natural substances that interrupt the life cycles for MERS and SARS, as well as their potential application in the treatment of COVID-19.

Investigation of total zinc contents and zinc-protein profile in medicinal plants traditionally used for diabetes treatment.

This study aims at the assessment of total zinc contents, water zinc extract contents and zinc-protein profile in medicinal plants traditionally used for diabetes treatment. While zinc-protein profile was screened in plant samples using the online coupling of size exclusion chromatography-inductively coupled plasma-mass spectrometry (SEC-ICP-MS), total zinc contents and zinc water extract contents were determined using inductively coupled plasma-optical emission spectrometry (ICP-OES). The analysis of two certified reference materials with similar matrix for total zinc content revealed recovery values of 97.1% and 100.5% while the average of recovery of the summed Zn concentrations from protein fractions compared to total Zn was 103.0 ± 4.8%. Based on the FAO/WHO classification, Sesamum indicum, Nigella sativa, Trigonella Foenum-graecum and Pennisetum glaucum are classified as highest Zn-content. For protein profile, zinc was quantified in 330-430 and 50-60 kDa fractions of all examined plants while no contents were quantified in the inorganic fraction 0.05-0.4 kDa of all plant species. Also, only three plant species recorded Zn contents in the phytate fraction (0.9-1.5 kDa fraction). The fruits of the Momordica Charantia and the Citrullus colocynthis were with the highest extractable zinc concentration; 13.55 ± 0.45 and 10.08 ± 0.63 mg/kg, respectively. The highest Zinc capturing capacity was reported for the 50-60 and 70-87 KDa protein fractions.

Levels of zinc, copper, cadmium, and lead in fruits and vegetables grown and consumed in Aseer Region, Saudi Arabia.

The levels of four metals (Zn, Cu, Cd, and Pb) were evaluated in two fruit types (apricot and fig), a fruity vegetable (tomato), and three leafy vegetables (arugula, spinach, and lettuce) that are commonly grown and consumed in Aseer Region, Saudi Arabia. Flame atomic absorption spectrophotometry was employed for quantification. The quality of results was checked by a certified reference material (NIST SRM 1570a). Good recovery values in the range of 87-104% were achieved. Metals were quantified in washed and unwashed samples to evaluate the effect of washing. Statistically, no significant difference was noticed (p>0.05), except for Zn in arugula and Cu in apricot and spinach. The levels of metals found in the analyzed fruits and vegetables were in their normal ranges in crops and not posing any serious risks to the consumers in Aseer Region. The toxic elements Pb and Cd were well below the maximum levels set in the Saudi and international food standards. Zn and Cu levels were comparable to the ranges reported in worldwide previous studies.

Microplastic prevalence in epipelagic layer: Evidence from epipelagic inhabiting prawns of north-west Arabian Sea.

The escalating global microplastic (MP) pollution severely threatens marine life due to insufficient waste management and widespread single-use plastic. This study focuses on assessing MP contamination in commercial prawns from Gujarat State, India. Ten prawn species collected at five main fishing harbors revealed 590 MP particles in their gastrointestinal tracts, averaging 6.08 ± 5.96 MPs/g and 1.15 ± 0.78 MPs/individual. Significant variations in contamination levels were observed between species and study sites. Pollution indices indicated very high contamination throughout the study sites. Threads were the predominant shape, with blue and black as prevalent colors. Size-wise, 1-2 mm MPs dominated. Polymer analysis identified polyethylene terephthalate, polyurethane, polystyrene, polypropylene, polyvinyl chloride, and acrylonitrile butadiene styrene. The findings provided crucial preliminary information for ecotoxicology and seafood safety investigations regarding MP contamination in commercially important prawns.