Fabrication of PEG-PLGA Microparticles with Tunable Sizes for Controlled Drug Release Application.

Polymeric microparticles of polyethyleneglycol-polylactic acid-co-glycolic acid (PEG-PLGA) are widely used as drug carriers for a variety of applications due to their unique characteristics. Although existing techniques for producing polymeric drug carriers offer the possibility of achieving greater production yield across a wide range of sizes, these methods are improbable to precisely tune particle size while upholding uniformity of particle size and morphology, ensuring consistent production yield, maintaining batch-to-batch reproducibility, and improving drug loading capacity. Herein, we developed a novel scalable method for the synthesis of tunable-sized microparticles with improved monodispersity and batch-to-batch reproducibility via the coaxial flow-phase separation technique. The study evaluated the effect of various process parameters on microparticle size and polydispersity, including polymer concentration, stirring rate, surfactant concentration, and the organic/aqueous phase flow rate and volume ratio. The results demonstrated that stirring rate and polymer concentration had the most significant impact on the mean particle size and distribution, whereas surfactant concentration had the most substantial impact on the morphology of particles. In addition to synthesizing microparticles of spherical morphology yielding particle sizes in the range of 5-50 µm across different formulations, we were able to also synthesize several microparticles exhibiting different morphologies and particle concentrations as a demonstration of the tunability and scalability of this method. Notably, by adjusting key determining process parameters, it was possible to achieve microparticle sizes in a comparable range (5-7 µm) for different formulations despite varying the concentration of polymer and volume of polymer solution in the organic phase by an order of magnitude. Finally, by the incorporation of fluorescent dyes as model hydrophilic and hydrophobic drugs, we further demonstrated how polymer amount influences drug loading capacity, encapsulation efficiency, and release kinetics of these microparticles of comparable sizes. Our study provides a framework for fabricating both hydrophobic and hydrophilic drug-loaded microparticles and elucidates the interplay between fabrication parameters and the physicochemical properties of microparticles, thereby offering an itinerary for expanding the applicability of this method for producing polymeric microparticles with desirable characteristics for specific drug delivery applications.

Whispering gallery mode resonator sensor for in situ measurements of hydrogel gelation.

Whispering gallery mode (WGM) resonators are compact and ultrasensitive devices, which enable label-free sensing at the single-molecule level. Despite their high sensitivity, WGM resonators have not been thoroughly investigated for use in dynamic biochemical processes including molecular diffusion and polymerization. In this work, the first report of using WGM sensors to continuously monitor a chemical reaction (i.e. gelation) in situ in a hydrogel is described. Specifically, we monitor and quantify the gelation dynamics of polyacrylamide hydrogels using WGM resonators and compare the results to an established measurement method based on rheology. Rheology measures changes in viscoelasticity, while WGM resonators measure changes in refractive index. Different gelation conditions were studied by varying the total monomer concentration and crosslinker concentration of the hydrogel precursor solution, and the resulting similarities and differences in the signal from the WGM resonator and rheology are elucidated. This work demonstrates that WGM alone or in combination with rheology can be used to investigate the gelation dynamics of hydrogels to provide insights into their gelation mechanisms.

Macroporous PEG-Alginate Hybrid Double-Network Cryogels with Tunable Degradation Rates Prepared via Radical-Free Cross-Linking for Cartilage Tissue Engineering.

Trauma or repeated damage to joints can result in focal cartilage defects, significantly elevating the risk of osteoarthritis. Damaged cartilage has an inherently limited self-healing capacity and remains an urgent unmet clinical need. Consequently, there is growing interest in biodegradable hydrogels as potential scaffolds for the repair or reconstruction of cartilage defects. Here, we developed a biodegradable and macroporous hybrid double-network (DN) cryogel by combining two independently cross-linked networks of multiarm polyethylene glycol (PEG) acrylate and alginate.Hybrid DN cryogels are formed using highly biocompatible click reactions for the PEG network and ionic bonding for the alginate network. By judicious selection of various structurally similar cross-linkers to form the PEG network, we can generate hybrid DN cryogels with customizable degradation kinetics. The resulting PEG-alginate hybrid DN cryogels have an interconnected macroporous structure, high mechanical strength, and rapid swelling kinetics. The interconnected macropores in the cryogels support efficient mesenchymal stem cell infiltration at a high density. Finally, we demonstrate that PEG-alginate hybrid DN cryogels allow sustained release of chondrogenic growth factors and support chondrogenic differentiation of mouse mesenchymal stem cells. This study provides a novel method to generate macroporous hybrid DN cryogels with customizable degradation rates and a potential scaffold for cartilage tissue engineering.

Soft Polyethylene Glycol Hydrogels Support Human PSC Pluripotency and Morphogenesis.

Lumenogenesis within the epiblast represents a critical step in early human development, priming the embryo for future specification and patterning events. However, little is known about the specific mechanisms that drive this process due to the inability to study the early embryo in vivo. While human pluripotent stem cell (hPSC)-based models recapitulate many aspects of the human epiblast, most approaches for generating these 3D structures rely on ill-defined, reconstituted basement membrane matrices. Here, we designed synthetic, nonadhesive polyethylene glycol (PEG) hydrogel matrices to better understand the role of matrix mechanical cues in iPSC morphogenesis, specifically elastic modulus. First, we identified a narrow range of hydrogel moduli that were conducive to the hPSC viability, pluripotency, and differentiation. We then used this platform to investigate the effects of the hydrogel modulus on lumenogenesis, finding that matrices of intermediate stiffness yielded the most epiblast-like aggregates. Conversely, stiffer matrices impeded lumen formation and apico-basal polarization, while the softest matrices yielded polarized but aberrant structures. Our approach offers a simple, modular platform for modeling the human epiblast and investigating the role of matrix cues in its morphogenesis.

Feature Reviews in Pharmaceutical Technology.

We are excited to present the Special Issue, "Feature Reviews in Pharmaceutical Technology", aiming to highlight exciting developments in pharmaceutical technologies [...].

Copper-Free Azide-Alkyne Cycloaddition for Peptide Modification of Alginate Hydrogels.

Alginate, a biocompatible polymer naturally derived from algae, is widely used as a synthetic analogue of the extracellular matrix in tissue engineering. Integrin-binding peptide motifs, including RGD, a derivative of fibronectin, are typically grafted to the alginate polymer through carbodiimide reactions between peptide amines and alginate uronic acids. However, lack of chemo-selectivity of carbodiimide reactions can lead to side reactions that lower peptide bioactivity. To overcome these limitations, we developed an approach for copper-free, strain-promoted azide-alkyne cycloaddition (SPAAC)-mediated conjugation of azide-modified adhesive peptides (azido-cyclo-RGD, Az-cRGD) onto alginate. Successful conjugation of azide-reactive cyclooctynes onto alginates using a heterobifunctional crosslinker was confirmed by azido-coumarin fluorescent assay, NMR, and through click reactions with azide-modified fluorescent probes. Compared to cyclo-RGD peptides directly conjugated to alginate polymers with standard carbodiimide chemistry, Az-cyclo-RGD peptides exhibited higher bioactivity, as demonstrated by cell adhesion and proliferation assays. Finally, Az-cRGD peptides enhanced the effects of recombinant bone morphogenetic proteins on inducing osteogenesis of osteoblasts and bone marrow stromal stem cells in 3D alginate gels. SPAAC-mediated click approaches for peptide-alginate bioconjugation overcome the limitations of previous alginate bioconjugation approaches and potentially expand the range of ligands that can be grafted to alginate polymers for tissue engineering applications.

Integrin and syndecan binding peptide-conjugated alginate hydrogel for modulation of nucleus pulposus cell phenotype.

Biomaterial based strategies have been widely explored to preserve and restore the juvenile phenotype of cells of the nucleus pulposus (NP) in degenerated intervertebral discs (IVD). With aging and maturation, NP cells lose their ability to produce necessary extracellular matrix and proteoglycans, accelerating disc degeneration. Previous studies have shown that integrin or syndecan binding peptide motifs from laminin can induce NP cells from degenerative human discs to re-express juvenile NP-specific cell phenotype and biosynthetic activity. Here, we engineered alginate hydrogels to present integrin- and syndecan-binding peptides alone or in combination (cyclic RGD and AG73, respectively) to introduce bioactive features into the alginate gels. We demonstrated human NP cells cultured upon and within alginate hydrogels presented with cRGD and AG73 peptides exhibited higher cell viability, biosynthetic activity, and NP-specific protein expression over alginate alone. Moreover, the combination of the two peptide motifs elicited markers of the NP-specific cell phenotype, including N-Cadherin, despite differences in cell morphology and multicellular cluster formation between 2D and 3D cultures. These results represent a promising step toward understanding how distinct adhesive peptides can be combined to guide NP cell fate. In the future, these insights may be useful to rationally design hydrogels for NP cell-transplantation based therapies for IVD degeneration.

Biodegradable polyethylene glycol hydrogels for sustained release and enhanced stability of rhGALNS enzyme.

Mucopolysaccharidosis IVA (Morquio A disease) is a genetic disorder caused by deficiency of N-acetylgalactosamine-6-sulfate-sulfatase (GALNS), leading to accumulation of keratan sulfate and chondroitin-6-sulfate in lysosomes. Many patients become wheelchair-dependent as teens, and their life span is 20-30 years. Currently, enzyme replacement therapy (ERT) is the treatment of choice. Although it alleviates some symptoms, replacing GALNS enzyme poses several challenges including very fast clearance from circulation and instability at 37 °C. These constraints affect frequency and cost of enzyme infusion and ability to reach all tissues. In this study, we developed injectable and biodegradable polyethylene glycol (PEG) hydrogels, loaded with recombinant human GALNS (rhGALNS) to improve enzyme stability and bioavailability, and to sustain release. We established the enzyme's release profile via bulk release experiments and determined diffusivity using fluorescence correlation spectroscopy. We observed that PEG hydrogels preserved enzyme activity during sustained release for 7 days. In the hydrogel, rhGALNS diffused almost four times slower than in buffer. We further confirmed that the enzyme was active when released from the hydrogels, by measuring its uptake in patient fibroblasts. The developed hydrogel delivery device could overcome current limits of rhGALNS replacement and improve quality of life for Morquio A patients. Encapsulated GALNS enzyme in a polyethylene glycol hydrogel improves GALNS stability by preserving its activity, and provides sustained release for a period of at least 7 days.

Design of Hydrolytically Degradable Polyethylene Glycol Crosslinkers for Facile Control of Hydrogel Degradation.

Hydrogels, whose degradability can be controlled while also preserving cell viability or biomolecule stability, are in demand. Degradable polyethylene glycol crosslinkers are hydrolytically designed for use in hydrogels. Degradation is controlled by crosslinker chemical structure, such as introducing local hydrophobicity, steric hindrance, or electron-withdrawing moieties near a degradable ester moiety. Hydrogels made using these crosslinkers have gelation times from 1 to 22 min, storage moduli from 3 to 10 kPa, mesh sizes from 10 to 13 nm, and degradation times from 18 h to 16 d. However, when reaction conditions are modified to achieve similar gelation time, hydrogels have similar initial properties but preserve the wide range of degradation times. All crosslinkers support high cell viability upon hydrogel encapsulation or exposure to leachables and degradation products. This innovation in controlling degradation can help realize the hydrogels' potential for drug delivery or as matrices for cell encapsulation and transplantation.

Macroporous interpenetrating cryogel network of poly(acrylonitrile) and gelatin for biomedical applications.

Cryogels are supermacroporous gel network formed by cryogelation of appropriate monomers or polymeric precursors at subzero temperature. The beneficial feature of this system is a unique combination of high porosity with adequate mechanical strength and osmotic stability, due to which they are being envisaged as potential scaffold material for various biomedical applications. One of the important aspect of cryogel is simple approach by which they can be synthesized and use of aqueous solvent for their synthesis which make them suitable for different biological applications. Various modifications of the cryogels have been sought which involves coupling of various ligands to its surfaces, grafting of polymer chain to cryogel surface or interpenetrating networks of two or more polymers to form a cryogel which provides diversity of its applications. In the following work we have synthesized full interpenetrating network of polyacrylonitrile (PAN)-gelatin with varied gelatin concentration. The PAN-gelatin cryogel interpenetrating network is macroporous in nature and has high percentage swelling equilibrium in the range of 862-1,200 with a flow rate greater than 10 ml/min, which characterizes the interconnectivity of pores and convective flow within the network. PAN-gelatin interpenetrating cryogel network has good mechanical stability as determined by Young's modulus which varies from 123 kPa to 819 kPa depending upon the polymer concentration. Moreover they are shown to be biocompatible and support cell growth within the scaffolds.

Cell Microencapsulation in Polyethylene Glycol Hydrogel Microspheres Using Electrohydrodynamic Spraying.

Microencapsulation of cells is beneficial for various biomedical applications, such as tissue regeneration and cell delivery. While a variety of techniques can be used to produce microspheres, electrohydrodynamic spraying (EHS) has shown promising results for the fabrication of cell-laden hydrogel microspheres in a wide range of sizes and in a relatively high-throughput manner. Here we describe an EHS technique for the fabrication of cell-laden polyethylene glycol (PEG) microspheres. We utilize mild hydrogel gelation chemistry and a combination of EHS parameters to allow for cell microencapsulation with high efficiency and viability. We also give examples on the effect of different EHS parameters such as inner diameter of the needle, voltage and flow rate on microsphere size and encapsulated cell viability.

Platelet-Rich Plasma Released From Polyethylene Glycol Hydrogels Exerts Beneficial Effects on Human Chondrocytes.

Osteoarthritis (OA) is a debilitating joint disease resulting from chronic joint inflammation and erosion of articular cartilage. A promising biological treatment for OA is intra-articular administration of platelet-rich plasma (PRP). However, immediate bolus release of growth factors limits beneficial therapeutic effects of PRP, thus necessitating the demand for sustained release platforms. In this study, we evaluated the therapeutic value of PRP released from a polyethylene glycol (PEG) hydrogel on articular chondrocytes/cartilage explants derived from OA patients. Lyophilized PRP (PRGF) was encapsulated in PEG hydrogels at 10% w/v and hydrogel swelling, storage modulus and degradation and PRGF release kinetics were determined. PRGF releasate from the hydrogels was collected on day 1, 4, and 11. Encapsulation of PRGF at 10% w/v in PEG hydrogels had minimal effect on hydrogel properties. PRGF was released with an initial burst followed by sustained release until complete hydrogel degradation. Effect of PRGF releasates and bolus PRGF (1% w/v PRGF) on patient-derived cartilage explants or chondrocytes was assessed by chondrocyte proliferation (pico-green assay), gene expression for COL1A1, COL2A1, MMP13, COX2, and NFKB1 (real-time polymerase chain reaction), and measurement of nitric oxide concentration (Griess' assay). Compared to bolus PRGF, PRGF releasates enhanced chondrocyte proliferation, suppressed the expression of genes like MMP13, NFKB1, COL1A1, and COL2A1 and reduced levels of nitric oxide. Taken together, these results indicate that release of PRGF from PEG hydrogels may improve the therapeutic efficacy of PRP and merits further investigation in an animal model of OA. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:2401-2410, 2019.

Upstream processes in antibody production: evaluation of critical parameters.

The demand for monoclonal antibody for therapeutic and diagnostic applications is rising constantly which puts up a need to bring down the cost of its production. In this context it becomes a prerequisite to improve the efficiency of the existing processes used for monoclonal antibody production. This review describes various upstream processes used for monoclonal antibody production and evaluates critical parameters and efforts which are being made to enhance the efficiency of the process. The upstream technology has tremendously been upgraded from host cells used for manufacturing to bioreactors type and capacity. The host cells used range from microbial, mammalian to plant cells with mammalian cells dominating the scenario. Disposable bioreactors are being promoted for small scale production due to easy adaptation to process validation and flexibility, though they are limited by the scale of production. In this respect Wave bioreactors for suspension culture have been introduced recently. A novel bioreactor for immobilized cells is described which permits an economical and easy alternative to hollow fiber bioreactor at lab scale production. Modification of the cellular machinery to alter their metabolic characteristics has further added to robustness of cells and perks up cell specific productivity. The process parameters including feeding strategies and environmental parameters are being improved and efforts to validate them to get reproducible results are becoming a trend. Online monitoring of the process and product characterization is increasingly gaining importance. In total the advancement of upstream processes have led to the increase in volumetric productivity by 100-fold over last decade and make the monoclonal antibody production more economical and realistic option for therapeutic applications.

Sustained release of multicomponent platelet-rich plasma proteins from hydrolytically degradable PEG hydrogels.

Platelet-rich plasma (PRP), an autologous blood derived product is a concentrated mix of multiple growth factors and cytokines. Direct injections of PRP are clinically used for treatment of various musculoskeletal disorders and in wound healing. However, PRP therapy has met with limited clinical success possibly due to unpredictable and premature bolus delivery of PRP growth factors. The objective of this study was to predictably control the bioavailability of PRP growth factors using a hydrolytically degradable polyethylene glycol (PEG) hydrogel. We used a step-growth polymerization based on a Michael-type addition reaction between a 6-arm PEG-acrylate and a dithiol crosslinker, which led to the formation of a homogenous hydrogel network under mild, physiologically relevant conditions. Specifically, to model the release of multicomponent PRP through PEG hydrogels, we examined bulk diffusion of PRP as well as model proteins in a size range corresponding to that of growth factors found in PRP. Our results indicated that protein size and hydrogel degradation controlled diffusion of all proteins and that secondary structure of proteins encapsulated during gelation remained unaffected post-release. Analysis of specific PRP proteins released from the hydrogel showed sustained release until complete hydrogel degradation. PRP released from hydrogels promoted proliferation of human dermal fibroblast, indicating retained bioactivity upon encapsulation and release. The versatile hydrogel system holds clinical potential as a therapeutic drug delivery depot of multicomponent mixtures like PRP. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 3304-3314, 2017.

Control of gelation, degradation and physical properties of polyethylene glycol hydrogels through the chemical and physical identity of the crosslinker.

Tuning hydrogel properties through minor modifications of the crosslinker structure is a beneficial approach for hydrogel design that could result in hydrogels with wide range of properties to match a desired application. In this study, we analyzed the relationship between the dithiol crosslinker chemical and physical structure and the resulting properties of polyethylene glycol (PEG) hydrogels formed via Michael-type addition reaction. Specifically, the dithiol crosslinker properties and chemical structure were correlated with gelation time, hydrolytic degradation rate, reaction rate constant, crosslink density and storage modulus of PEG hydrogels. By changing the properties and structure of the crosslinker, hydrogels with controlled degradation ranging from 10 h to 22 d were obtained. It was also established that hydrogel gelation times correlated closely with degradation times. By extensive characterization of the dithiol crosslinker chemical structure and physical properties, we identified two sets of conditions which yielded fast-gelling, fast-degrading hydrogels and slow-gelling, slow-degrading hydrogels. Uniquely, the hydrogel storage moduli could be controlled by the dithiol crosslinker chemical identity independent of the degradation time of the hydrogel or the mesh size.

Design of electrohydrodynamic sprayed polyethylene glycol hydrogel microspheres for cell encapsulation.

Electrohydrodynamic spraying (EHS) has recently gained popularity for microencapsulation of cells for applications in cell delivery and tissue engineering. Some of the polymers compatible with EHS are alginate, chitosan, and other similar natural polymers, which are subject to ionotropic or physical gelation. It is desirable to further extend the use of the EHS technique beyond such polymers for wider biofabrication applications. Here, building upon our previous work of making PEG microspheres via EHS, we utilized the principles of EHS to fabricate cell-laden polyethylene glycol (PEG) hydrogel microspheres. The gelation of PEG hydrogel microspheres was achieved by forming covalent crosslinks between multiarm PEG acrylate and dithiol crosslinkers via Michael-type addition. We conducted a detailed investigation of the critical parameters of EHS, such as the applied voltage, inner needle diameter (i.d. needle), and flow rate, to obtain PEG microspheres with high cell viability and tightly-controlled diameters in the range of 70-300 µm. The polydispersity of cell-laden PEG hydrogel microspheres as measured by % coefficient of variation was between 6% and 23% for all conditions tested. We established that our method was compatible with different cell types and that all tested cell types could be encapsulated at high densities of 106-109 and ≥90% encapsulation efficiency. We observed cell aggregation within the hydrogel microspheres at applied voltage >5 kV. Since PEG is a synthetic polymer devoid of cell attachment sites, we could overcome this limitation by tethering Arg-Gly-Asp-Ser (RGDS) peptide to the PEG hydrogel microspheres; upon RGDS tethering, we observed uniform cell dispersion. The microencapsulated cells could be cultured in the PEG hydrogel microspheres of different sizes for up to one week without significant loss in cell viability. In conclusion, the EHS technique developed here could be used to generate cell-laden PEG hydrogel microspheres of controlled sizes for potential applications in cell delivery and organoid cultures.

Bilayer Cryogel Wound Dressing and Skin Regeneration Grafts for the Treatment of Acute Skin Wounds.

In this study, the potential of cryogel bilayer wound dressing and skin regenerating graft for the treatment of surgically created full thickness wounds was evaluated. The top layer was composed of polyvinylpyrrolidone-iodine (PVP-I) cryogel and served as the antiseptic layer, while the bottom regenerative layer was made using gelatin cryogel. Both components of the bilayer showed typical features of a cryogel interconnected macropore network, rapid swelling, high water uptake capacity of about 90%. Both PVP and gelatin cryogel showed high tensile strength of 45 and 10 kPa, respectively. Gelatin cryogel sheets were essentially elastic and could be stretched without any visible deformation. The antiseptic PVP-I layer cryogel sheet showed sustained iodine release and suppressed microbial growth when tested with skin pathogens (zone of inhibition ∼2 cm for sheet of 0.9 cm diameter). The gelatin cryogel sheet degraded in vitro in weeks. The gelatin cryogel sheet supported cell infiltration, attachment, and proliferation of fibroblasts and keratinocytes. Microparticles loaded with bioactive molecules (mannose-6-phosphate and human fibrinogen) were also incorporated in the gelatin cryogel sheets for their role in enhancing skin regeneration and scar free wound healing. In vivo evaluation of healing capacity of the bilayer cryogel was checked in rabbits by creating full thickness wound defect (diameter 2 cm). Macroscopic and microscopic observation at regular time intervals for 4 weeks demonstrated better and faster skin regeneration in the wound treated with cryogel bilayer as compared to untreated defect and the repair was comparable to commercial skin regeneration scaffold Neuskin-F. Complete skin regeneration was observed after 4 weeks of implantation with no sign of inflammatory response. Defects implanted with cryogel having mannose-6-phosphate showed no scar formation, while the wound treated with bilayer incorporated with human fibrinogen microparticles showed early signs of skin regeneration; epidermis formation occurred at 2 weeks after implantation.

Fabrication of macroporous cryogels as potential hepatocyte carriers for bioartificial liver support.

Two different cryogels composed of copolymer of acrylonitrile (AN) and N-vinyl-2-pyrrolidone (NVP) (poly(AN-co-NVP)) and interpenetrated polymer networks (IPN) of chitosan and poly(N-isopropylacrylamide) (poly(NiPAAm)-chitosan) were fabricated by gelation at sub-zero temperatures. The two cryogels possess an interconnected network of macropores of size 20-100 µm and efficient transport properties as determined by physiochemical analysis. Both cryogels support in vitro growth and function of fibroblasts (COS-7) and human liver hepatocarcinoma cells (HepG2). The cryogels are hemocompatible as demonstrated by low albumin adsorption and platelet adherence. Furthermore, in vivo implantation of poly(NiPAAm)-chitosan cryogel in mice shows its biocompatibility with the surrounding tissue. Primary rat hepatocytes grown on poly(NiPAAm)-chitosan cryogel for 96 h formed cellular aggregates and maintained their functions in terms of, ammonia removal, ureagenesis and drug detoxification. Cryogel-based closed continuous bioreactor systems could maintain HepG2 cells at high density for 7 days. Off-line clinical evaluation of these cryogel-based bioreactors showed the ability of immobilized cells to detoxify circulating plasma obtained from patients with acute on chronic liver failure (ACLF). Altogether, the presented data suggests cryogels as a potential bioreactor matrix for bio-artificial liver support system.

Advancements in in vitro hepatic models: application for drug screening and therapeutics.

The liver is one of the most complex organs in the body, performing a multitude of functions. Liver tissue engineering is a combination of various strategies that aim at generating functional liver tissue that can help restore and/or support the ailing liver as it recuperates. Conventionally, in vitro culture has involved growing cells in different media compositions or layering them on matrices largely composed of native ECM components such as collagen or Matrigel. With recent advances in technology, more sophisticated techniques are being devised that are better equipped to capture distinct features of the liver in an in vivo microenvironment. Three-dimensional (3D) cultures of liver cells in 3D scaffolds, as spheroids or cell sheets, allow for a high degree of cell-cell and cell-matrix interaction and an in vivo-like architecture. More recently, decellularized matrices have been used as scaffolds that support ideal cell-matrix interactions. Microfabrication technologies initially used to pattern semiconductors in the integrated circuit industry have grown out of this field and now encompass a variety of methods to etch patterns onto both 2D and 3D scaffolds to allow incorporation of custom-made features resembling the fluid network and organization in native liver. This improvisation permits for enhanced vascularization and oxygen diffusion to the in vitro liver tissue. In this review, we discuss the various configurations that have been implemented in the in vitro culture of liver cells and their application in liver therapeutics in the form of implantable liver tissue constructs and tools for drug screening.

Biomaterials for liver tissue engineering.

Liver extracellular matrix (ECM) composition, topography and biomechanical properties influence cell-matrix interactions. The ECM presents guiding cues for hepatocyte phenotype maintenance, differentiation and proliferation both in vitro and in vivo. Current understanding of such cell-guiding cues along with advancement of techniques for scaffold fabrication has led to evolution of matrices for liver tissue culture from simple porous scaffolds to more complex 3D matrices with microarchitecture similar to in vivo. Natural and synthetic polymeric biomaterials fabricated in different topographies and porous matrices have been used for hepatocyte culture. Heterotypic and homotypic cell interactions are necessary for developing an adult liver as well as an artificial liver. A high oxygen demand of hepatocytes as well as graded oxygen distribution in liver is another challenging attribute of the normal liver architecture that further adds to the complexity of engineered substrate design. A balanced interplay of cell-matrix interactions along with cell-cell interactions and adequate supply of oxygen and nutrient determines the success of an engineered substrate for liver cells. Techniques devised to incorporate these features of hepatic function and mimic liver architecture range from maintaining liver cells in mm-sized tailor-made scaffolds to a more bottoms up approach that starts from building the microscopic subunit of the whole tissue. In this review, we discuss briefly various biomaterials used for liver tissue engineering with respect to design parameters such as scaffold composition and chemistry, biomechanical properties, topography, cell-cell interactions and oxygenation.