Use of quantitative microbiological analyses to trace origin of contamination of parenteral nutrition solutions.

In the summer of 2010, parenteral nutrition (PN) admixtures were administered to neonates in the Pediatric Department of the University Medical Center Mainz that provoked severe clinical sequelae. Contamination of a dummy infusion with Enterobacter cloacae and Escherichia hermannii was detected on the day of the incident, and the same isolates were subsequently grown from all PN admixtures as well as from the parent amino acid solution from which the admixtures had been prepared. Quantitative microbiological analyses paired with the determination of endotoxin concentrations enabled the conclusion to be reached that the amino acid solution had represented the primary source of contamination, which must have occurred in the distant past and may have derived from passage of the bacteria through a crack in the glass container. The findings have large implications, and the approaches employed should become of value when similar incidents occur again in the future.

Real-time PCR detection of Pseudomonas aeruginosa in clinical and municipal wastewater and genotyping of the ciprofloxacin-resistant isolates.

Real-time quantification of Pseudomonas aeruginosa was performed in various wastewater systems including clinical, municipal wastewaters and inflow from a wastewater treatment plant. The highest concentrations of P. aeruginosa-specific targets were detected in clinical wastewaters. Limitations of the detection system resulting from inhibition or cross-reaction were identified. Ciprofloxacin-resistant P. aeruginosa strains were isolated after specific enrichment from clinical and municipal wastewaters. In some cases they were also cultivated from effluent of a wastewater treatment plant, and from its downstream river water. A total of 119 isolates were phenotypically characterized as ciprofloxacin-resistant via antibiogram testing. Subsequently, the fluoroquinolone-resistance-mediating mutations in the genes gyrA codon positions 83 and 87, gyrB codon position 466 and parC codon positions 87 and 91 were determined by mini-sequencing. Ciprofloxacin resistance was mainly associated with mutations in gyrA codon position 83 and parC mutation in codon positions 87 or 91 of the bacterial gyrase and topoisomerase II genes. All ciprofloxacin-resistant P. aeruginosa strains were compared with genotypes from clinical data of fluoroquinolone-resistant P. aeruginosa infections. The results were in agreement with data from clinical analyses, with the exception that no gyrA 87 and no gyrB mutations were found in ciprofloxacin-resistant P. aeruginosa wastewater isolates.

Infections associated with medical devices: pathogenesis, management and prophylaxis.

The insertion or implantation of foreign bodies has become an indispensable part in almost all fields of medicine. However, medical devices are associated with a definitive risk of bacterial and fungal infections. Foreign body-related infections (FBRIs), particularly catheter-related infections, significantly contribute to the increasing problem of nosocomial infections. While a variety of micro-organisms may be involved as pathogens, staphylococci account for the majority of FBRIs. Their ability to adhere to materials and to promote formation of a biofilm is the most important feature of their pathogenicity. This biofilm on the surface of colonised foreign bodies is regarded as the biological correlative for the clinical experience with FBRI, that is, that the host defence mechanisms often seem to be unable to handle the infection and, in particular, to eliminate the micro-organisms from the infected device. Since antibacterial chemotherapy is also frequently not able to cure these infections despite the use of antibacterials with proven in vitro activity, removal of implanted devices is often inevitable and has been standard clinical practice. However, in specific circumstances, such as infections of implanted medical devices with coagulase-negative staphylococci, a trial of salvage of the device may be justified. All FBRIs should be treated with antibacterials to which the pathogens have been shown to be susceptible. In addition to systemic antibacterial therapy, an intraluminal application of antibacterial agents, referred to as the 'antibiotic-lock' technique, should be considered to circumvent the need for removal, especially in patients with implanted long-term catheters. To reduce the incidence of intravascular catheter-related bloodstream infections, specific guidelines comprising both technological and nontechnological strategies for prevention have been established. Quality assurance, continuing education, choice of the catheter insertion site, hand hygiene and aseptic techniques are aspects of particular interest. Furthermore, all steps in the pathogenesis of biofilm formation may represent targets against which prevention strategies may be directed. Alteration of the foreign body material surface may lead to a change in specific and nonspecific interactions with micro-organisms and, thus, to a reduced microbial adherence. Medical devices made out of a material that would be antiadhesive or at least colonisation resistant would be the most suitable candidates to avoid colonisation and subsequent infection. Another concept for the prevention of FBRIs involves the impregnation of devices with various substances such as antibacterials, antiseptics and/or metals. Finally, further studies are needed to translate the knowledge on the mechanisms of biofilm formation into applicable therapeutic and preventive strategies.

Microbiological quality of carbonated drinking water produced with in-home carbonation systems.

The microbiological quality of carbonated water produced with tap water in commercial in-home carbonation systems was determined, the results being discussed in the context of the microbiological quality of the tap water used, the properties of the drink makers, and the procedures of preparation and washing of various parts of the appliance. The last-mentioned data were received from each participant of the study by questionnaire. Escherichia coli, coliforms, fecal streptococci and spore-forming sulphite-reducing anaerobes were used as indicators for the hygienic quality of the water. Tap-water samples were collected according to the usual procedure when filling the carbonating bottle, i.e., without previous flushing and disinfection of the faucet. In 12% of tap-water samples, coliforms could be detected. On the other hand, in 20 of 52 carbonated waters (39%), coliforms as indicators of water pollution were found. By means of fecal streptococci and Pseudomonas aeruginosa, it was possible to establish additional contamination not involving E. coli or coliforms alone. Analysis revealed that, in addition to contaminated tap water, a bacterial biofilm on the inner surface of the re-usable bottles had a predominant influence on the microbiological quality of the carbonated water.

Development of a long-lasting ventricular catheter impregnated with a combination of antibiotics.

A ventricular silicone catheter impregnated with a combination of rifampin and a quinolone was developed in order to prevent ventricular shunt related infections. As model substance for the quinolones we used sparfloxacin, because of its specific physicochemical properties resulting in a quantitative detection also in the presence of a second antibiotic. In our study we focused especially on an optimization of the antibiotic release out of the impregnated catheters in order to develop long lasting devices with a broad antimicrobial spectrum. A release-optimized catheter was tested with an in vitro colonization test and additionally with a method developed to examine the spread of bacteria on a catheter surface. In vitro experiments showed that the impregnated catheters reduce the colonization with Staphylococcus epidermidis for at least 1 year and prevent the spread of bacteria along the catheter surface.

Bactericidal effect of the Er:YAG laser on dental implant surfaces: an in vitro study.

BACKGROUND: The aim of the in vitro study was to examine the bactericidal effect of an Er:YAG laser on common dental implant surfaces. METHODS: Seventy-two titanium platelets with 3 different surfaces--sandblasted and acid-etched (SA), titanium plasma-sprayed (TPS), and hydroxyapatite-coated (HA)--were incubated with a suspension of Streptococcus sanguinis (ATCC 10556). Irradiation at pulse energies of 60 and 120 mJ and a frequency of 10 pps was performed on a computer-controlled XY translation stage. After laser treatment the specimens were sonicated and the bacterial growth examined by counting colony forming units on blood agar plates. Temperature elevations during irradiation were investigated using K-type thermocouples. Laser treated implant surfaces were analyzed by means of electron microscopy. RESULTS: Compared to non-irradiated specimens, mean bacterial reductions of 99.51% (SA), 98.39% (HA), and 99.6% (TPS) at a pulse energy of 60 mJ and 99.92% (SA), 99.85% (HA), and 99.94% (TPS) at 120 mJ were calculated. At these laser parameters, no excessive temperature elevations or morphological implant surface alterations were detected. CONCLUSIONS: Even at low energy densities, the Er:YAG laser has a high bactericidal potential on common implant surfaces. Clinical studies are justified to evaluate the applicability and efficacy of the Er:YAG laser in the treatment of peri-implantitis.

Antimicrobial efficacy of semiconductor laser irradiation on implant surfaces.

PURPOSE: This study was conducted to investigate the antimicrobial effect of an 809-nm semiconductor laser on common dental implant surfaces. MATERIALS AND METHODS: Sandblasted and acid-etched (SA), plasma-sprayed (TPS), and hydroxyapatite-coated (HA) titanium disks were incubated with a suspension of S. sanguinis (ATCC 10556) and subsequently irradiated with a gallium-aluminum-arsenide (GaAlAs) laser using a 600-microm optical fiber with a power output of 0.5 to 2.5 W, corresponding to power densities of 176.9 to 884.6 W/cm2. Bacterial reduction was calculated by counting colony-forming units on blood agar plates. Cell numbers were compared to untreated control samples and to samples treated with chlorhexidine digluconate (CHX). Heat development during irradiation of the implants placed in bone blocks was visualized by means of shortwave thermography. RESULTS: In TPS and SA specimens, laser irradiation led to a significant bacterial reduction at all power settings. In an energy-dependent manner, the number of viable bacteria was reduced by 45.0% to 99.4% in TPS specimens and 57.6% to 99.9% in SA specimens. On HA-coated disks, a significant bacterial kill was achieved at 2.0 W (98.2%) and 2.5 W (99.3%) only (t test, P < .05). For specimens treated with CHX, the bacterial counts were reduced by 99.99% in TPS and HA-coated samples and by 99.89% in SA samples. DISCUSSION: The results of the study indicate that the 809-nm semiconductor laser is capable of decontaminating implant surfaces. Surface characteristics determine the necessary power density to achieve a sufficient bactericidal effect. The bactericidal effect, however, was lower than that achieved by a 1-minute treatment with 0.2% CHX. The rapid heat generation during laser irradiation requires special consideration of thermal damage to adjacent tissues. CONCLUSION: No obvious advantage of semiconductor laser treatment over conventional methods of disinfection could be detected in vitro.

The "Mainzer EMF-Wachhund": results from a watchdog project on self-reported health complaints attributed to exposure to electromagnetic fields.

The "Mainzer EMF-Wachhund," a watchdog project, offered a system of self-notification of health complaints attributed to exposures to electromagnetic fields (EMFs) to a population of a part of Germany with about 4 million inhabitants. By using a self-administered questionnaire, which was provided online and for download from the Internet, 192 persons reported such health complaints in the period from October 2003 to March 2005. Of these, 56% classified themselves as electromagnetic hypersensitive (EH). Predictors of this self classification were being affected by all kinds of EMF rather than single EMF sources and being female. On average, EH subjects reported a high degree of suffering, 77% of whom had already sought advice from physicians. An Internet-based standardized questionnaire is an economic way of offering affected persons a direct link to scientific institutions to establish contact. However, the study base obtained by such an approach is not representative to estimate a population-based prevalence. As a large number of subjects did not classify themselves as EH and reported very specific links between exposure and symptoms, they may provide a very distinct and interesting group for future research.