Fungal COP9 signalosome assembly requires connection of two trimeric intermediates for integration of intrinsic deneddylase.

The conserved eight-subunit COP9 signalosome (CSN) is required for multicellular fungal development. The CSN deneddylase cooperates with the Cand1 exchange factor to control replacements of E3 ubiquitin cullin RING ligase receptors, providing specificity to eukaryotic protein degradation. Aspergillus nidulans CSN assembles through a heptameric pre-CSN, which is activated by integration of the catalytic CsnE deneddylase. Combined genetic and biochemical approaches provided the assembly choreography within a eukaryotic cell for native fungal CSN. Interactomes of functional GFP-Csn subunit fusions in pre-CSN deficient fungal strains were compared by affinity purifications and mass spectrometry. Two distinct heterotrimeric CSN subcomplexes were identified as pre-CSN assembly intermediates. CsnA-C-H and CsnD-F-G form independently of CsnB, which connects the heterotrimers to a heptamer and enables subsequent integration of CsnE to form the enzymatically active CSN complex. Surveillance mechanisms control accurate Csn subunit amounts and correct cellular localization for sequential assembly since deprivation of Csn subunits changes the abundance and location of remaining Csn subunits.

F-box receptor mediated control of substrate stability and subcellular location organizes cellular development of Aspergillus nidulans.

Fungal growth and development are coordinated with specific secondary metabolism. This coordination requires 8 of 74 F-box proteins of the filamentous fungus Aspergillus nidulans. F-box proteins recognize primed substrates for ubiquitination by Skp1-Cul1-Fbx (SCF) E3 ubiquitin RING ligases and degradation by the 26S proteasome. 24 F-box proteins are found in the nuclear fraction as part of SCFs during vegetative growth. 43 F-box proteins interact with SCF proteins during growth, development or stress. 45 F-box proteins are associated with more than 700 proteins that have mainly regulatory roles. This corroborates that accurate surveillance of protein stability is prerequisite for organizing multicellular fungal development. Fbx23 combines subcellular location and protein stability control, illustrating the complexity of F-box mediated regulation during fungal development. Fbx23 interacts with epigenetic methyltransferase VipC which interacts with fungal NF-κB-like velvet domain regulator VeA that coordinates fungal development with secondary metabolism. Fbx23 prevents nuclear accumulation of methyltransferase VipC during early development. These results suggest that in addition to their role in protein degradation, F-box proteins also control subcellular accumulations of key regulatory proteins for fungal development.

Interaction between KDELR2 and HSP47 as a Key Determinant in Osteogenesis Imperfecta Caused by Bi-allelic Variants in KDELR2.

Osteogenesis imperfecta (OI) is characterized primarily by susceptibility to fractures with or without bone deformation. OI is genetically heterogeneous: over 20 genetic causes are recognized. We identified bi-allelic pathogenic KDELR2 variants as a cause of OI in four families. KDELR2 encodes KDEL endoplasmic reticulum protein retention receptor 2, which recycles ER-resident proteins with a KDEL-like peptide from the cis-Golgi to the ER through COPI retrograde transport. Analysis of patient primary fibroblasts showed intracellular decrease of HSP47 and FKBP65 along with reduced procollagen type I in culture media. Electron microscopy identified an abnormal quality of secreted collagen fibrils with increased amount of HSP47 bound to monomeric and multimeric collagen molecules. Mapping the identified KDELR2 variants onto the crystal structure of G. gallus KDELR2 indicated that these lead to an inactive receptor resulting in impaired KDELR2-mediated Golgi-ER transport. Therefore, in KDELR2-deficient individuals, OI most likely occurs because of the inability of HSP47 to bind KDELR2 and dissociate from collagen type I. Instead, HSP47 remains bound to collagen molecules extracellularly, disrupting fiber formation. This highlights the importance of intracellular recycling of ER-resident molecular chaperones for collagen type I and bone metabolism and a crucial role of HSP47 in the KDELR2-associated pathogenic mechanism leading to OI.

A Fluorescence-Detected Coordination-Induced Spin State Switch.

The response of the spin state to in situ variation of the coordination number (CISSS) is a promising and viable approach to smart sensor materials, yet it suffers to date from insensitive detection. Herein, we present the synthetic access to a family of planar nickel(II) complexes, whose CISSS is sensitively followed by means of fluorescence detection. For this purpose, nickel(II) complexes with four phenazine-based Schiff base-like ligands were synthesized and characterized through solution-phase spectroscopy (NMR and UV-vis), solid-state structure analysis (single-crystal XRD), and extended theoretical modeling. All of them reveal CISSS in solution through axial ligating a range of N- and O-donors. CISSS correlates nicely with the basicity of the axial ligand and the substitution-dependent acidity of the nickel(II) coordination site. Remarkably, three out of the four nickel(II) complexes are fluorescent in noncoordinating solvents but are fluorescence-silent in the presence of axial ligands such as pyridine. As these complexes are rare examples of fluorescent nickel(II) complexes, the photophysical properties with a coordination number of 4 were studied in detail, including temperature-dependent lifetime and quantum yield determinations. Most importantly, fluorescence quenching upon adding axial ligands allows a "black or white", i.e. digital, sensoring of spin state alternation. Our studies of fluorescence-detected CISSS (FD-CISSS) revealed that absorption-based CISSS and FD-CISSS are super proportional with respect to the pyridine concentration: FD-CISSS features a higher sensitivity. Overall, our findings indicate a favored ligation of these nickel(II) complexes in the excited state in comparison to the ground state.

New specific HSP47 functions in collagen subfamily chaperoning.

Although collagens are the most abundant proteins implicated in various disease pathways, essential mechanisms required for their proper folding and assembly are poorly understood. Heat-shock protein 47 (HSP47), an ER-resident chaperone, was mainly reported to fulfill key functions in folding and secretion of fibrillar collagens by stabilizing pro-collagen triple-helices. In this study, we demonstrate unique functions of HSP47 for different collagen subfamilies. Our results show that HSP47 binds to the N-terminal region of procollagen I and is essential for its secretion. However, HSP47 ablation does not majorly impact collagen VI secretion, but its lateral assembly. Moreover, specific ablation of Hsp47 in murine keratinocytes revealed a new role for the transmembrane collagen XVII triple-helix formation. Incompletely folded collagen XVII C-termini protruding from isolated HSP47 null keratinocyte membrane vesicles could be fully restored upon the application of recombinant HSP47. Thus, our study expands the current view regarding the client repertoire and function of HSP47, as well as emphasizes its importance for transmembrane collagen folding.

Direct observation of backbone planarization via side-chain alignment in single bulky-substituted polythiophenes.

The backbone conformation of conjugated polymers affects, to a large extent, their optical and electronic properties. The usually flexible substituents provide solubility and influence the packing behavior of conjugated polymers in films or in bad solvents. However, the role of the side chains in determining and potentially controlling the backbone conformation, and thus the optical and electronic properties on the single polymer level, is currently under debate. Here, we investigate directly the impact of the side chains by studying the bulky-substituted poly(3-(2,5-dioctylphenyl)thiophene) (PDOPT) and the common poly(3-hexylthiophene) (P3HT), both with a defined molecular weight and high regioregularity, using low-temperature single-chain photoluminescence (PL) spectroscopy and quantum-classical simulations. Surprisingly, the optical transition energy of PDOPT is significantly (∼2,000 cm-1 or 0.25 eV) red-shifted relative to P3HT despite a higher static and dynamic disorder in the former. We ascribe this red shift to a side-chain induced backbone planarization in PDOPT, supported by temperature-dependent ensemble PL spectroscopy. Our atomistic simulations reveal that the bulkier 2,5-dioctylphenyl side chains of PDOPT adopt a clear secondary helical structural motif and thus protect conjugation, i.e., enforce backbone planarity, whereas, for P3HT, this is not the case. These different degrees of planarity in both thiophenes do not result in different conjugation lengths, which we found to be similar. It is rather the stronger electronic coupling between the repeating units in the more planar PDOPT which gives rise to the observed spectral red shift as well as to a reduced calculated electron-hole polarization.

A Deep Blue B,N-Doped Heptacene Emitter That Shows Both Thermally Activated Delayed Fluorescence and Delayed Fluorescence by Triplet-Triplet Annihilation.

An easy-to-access, near-UV-emitting linearly extended B,N-doped heptacene with high thermal stability is designed and synthesized in good yields. This compound exhibits thermally activated delayed fluorescence (TADF) at ambient temperature from a multiresonant (MR) state and represents a rare example of a non-triangulene-based MR-TADF emitter. At lower temperatures triplet-triplet annihilation dominates. The compound simultaneously possesses narrow, deep-blue emission with CIE coordinates of (0.17, 0.01). While delayed fluorescence results mainly from triplet-triplet annihilation at lower temperatures in THF solution, where aggregates form upon cooling, the TADF mechanism takes over around room temperature in solution when the aggregates dissolve or when the compound is well dispersed in a solid matrix. The potential of our molecular design to trigger TADF in larger acenes is demonstrated through the accurate prediction of ΔEST using correlated wave-function-based calculations. On the basis of these calculations, we predicted dramatically different optoelectronic behavior in terms of both ΔEST and the optical energy gap of two constitutional isomers where only the boron and nitrogen positions change. A comprehensive structural, optoelectronic, and theoretical investigation is presented. In addition, the ability of the achiral molecule to assemble on a Au(111) surface to a highly ordered layer composed of enantiomorphic domains of racemic entities is demonstrated by scanning tunneling microscopy.

Iron(II) Spin Crossover Complexes Based on a Redox Active Equatorial Schiff-Base-Like Ligand.

In this work, two iron(II) coordination compounds with a N2O2 coordinating Schiff base-like ligand bearing a redox active tetrathiafulvalene (TTF) unit and pyridine or trans-1,2-bis(4-pyridylethylene) as an axial ligand are synthesized. Crystals suitable for single X-ray structure analysis were obtained for the new ligand. The complexes were characterized by magnetic susceptibility measurements, T-dependent UV-vis spectroscopy, and cyclic voltammetry. Both complexes display spin transition behavior below room temperature with T1/2 values of 146 and 156 K. The mononuclear iron(II) complex [FeTTFL(py)2] is relatively stable up to 400 K compared to similar complexes, showing no loss of axial ligands upon heating. Temperature dependent Mössbauer spectroscopy was conducted for the coordination polymer {[FeTTFL(bpee)]}n to get more information regarding the origin of the stepwise spin crossover (SCO) behavior observed in the magnetic measurements. The change of the spin state is accompanied by a change of the optical properties, which can be monitored by VT-UV-vis spectroscopy for the mononuclear complex and has been analyzed in theoretical studies. The redox behavior of the iron(II) complexes reveals three reversible redox steps which are located at the iron center and at the TTF unit of the ligand. Oxidation of the TTF unit induces characteristic changes in the UV-vis spectrum that can be followed by spectroelectrochemical UV-vis spectroscopy. Addressing the potential of the iron-centered redox process results in similar changes in the UV-vis spectrum, which indicates an electronic coupling of the redox active unit with the metal center under certain circumstances.

Spin-Crossover Iron(II) Coordination Polymer with Fluorescent Properties: Correlation between Emission Properties and Spin State.

A spin-crossover coordination polymer [Fe(L1)(bipy)]n (where L = a N2O22- coordinating Schiff base-like ligand bearing a phenazine fluorophore and bipy = 4,4'-bipyridine) was synthesized and exhibits a 48 K wide thermal hysteresis above room temperature (T1/2↑ = 371 K and T1/2↓ = 323 K) that is stable for several cycles. The spin transition was characterized using magnetic measurements, Mössbauer spectroscopy, and DSC measurements. T-dependent X-ray powder diffraction reveals a structural phase transition coupled with the spin transition phenomenon. The dimeric excerpt {(µ-bipy)[FeL1(MeOH)]2}·2MeOH of the coordination polymer chain crystallizes in the triclinic space group P1̅ and reveals that the packing of the molecules in the crystal is dominated by hydrogen bonds. Investigation of the emission properties of the complexes with regard to temperature shows that the spin crossover can be tracked by monitoring the emission spectra, since the emission color changes from greenish to a yellow color upon the low spin-to-high spin transition.

Structural Information for Conjugated Polymers from Optical Modeling.

We use a Frenkel-Holstein model of uncoupled chains in the adiabatic limit to simulate the optical spectra of the conjugated polymer ladder-type poly( p-phenylene) derivative (MeLPPP), which is a planar conjugated polymer with especially low interchain interactions. The theoretical calculations correctly reproduce the vibronic spectra and yield reasonable torsion angles between adjacent phenyl rings. The success of this approach indicates that, in contrast to interchain coupling, the strong electronic coupling along a polymer chain is more appropriately described in the adiabatic limit.

Extracting structural information from MEH-PPV optical spectra.

The Frenkel-Holstein model in the Born-Oppenheimer regime is used to interpret temperature-dependent photoluminescence spectra of solutions made with the poly(p-phenylene vinylene) derivative MEH-PPV. Using our recently developed structural optimization method and assuming only intrachain electronic coupling, we predict the structure of emissive MEH-PPV chromophores in terms of a mean torsional angle ϕ0 and its static fluctuations σϕ, assuming no cis-trans defects. This allows us to fully account for the observed changes in spectra, and the chromophore structures obtained are consistent with the known phase transition at 180 K between a "red" and "blue" phase.

Facile Synthesis and Chain-Length Dependence of the Optical and Structural Properties of Diketopyrrolopyrrole-Based Oligomers.

Here, we report the synthesis, optical properties, and solid-state packing of monodisperse oligomers of diketopyrrolopyrrole (DPP) up to five repeating units. The optical properties of DPP oligomers in solution and the solid state were investigated by a combination of steady-state and transient spectroscopy. Transient absorption spectroscopy and time-correlated single photon counting (TCSPC) measurements show that the fluorescence lifetime decreases with an increase in the oligomer size from monomer to trimer, thereby reaching saturation for pentameric DPP oligomers. The solid-state packing and crystallinity were probed by using advanced techniques, which included grazing incidence small-angle X-ray scattering (GISAXS) and X-ray diffraction (XRD) to elucidate the structure-property trend. Collectively, our chain-length dependent studies establish the fundamental correlation between the structure and property and provide a comprehensive understanding of the solid-state properties in DPP-DPP based conjugated systems.

The role of PbI2 in CH3NH3PbI3 perovskite stability, solar cell parameters and device degradation.

We report a systematic investigation on the role of excess PbI2 content in CH3NH3PbI3 perovskite film properties, solar cell parameters and device storage stability. We used the CH3NH3I vapor assisted method for the preparation of PbI2-free CH3NH3PbI3 films under a N2 atmosphere. These pristine CH3NH3PbI3 films were annealed at 165 °C for different time intervals in a N2 atmosphere to generate additional PbI2 in these films. From XRD measurements, the excess of PbI2 was quantified. Detailed characterization using scanning electron microscopy, X-ray diffraction, UV-Visible and photoluminescence for continuous aging of CH3NH3PbI3 films under ambient condition (50% humidity) is carried out for understanding the influence of different PbI2 contents on degradation of the CH3NH3PbI3 films. We find that the rate of degradation of CH3NH3PbI3 is accelerated due to the amount of PbI2 present in the film. A comparison of solar cell parameters of devices prepared using CH3NH3PbI3 samples having different PbI2 contents reveals a strong influence on the current density-voltage hysteresis as well as storage stability. We demonstrate that CH3NH3PbI3 devices do not require any residual PbI2 for a high performance. Moreover, a small amount of excess PbI2, which improves the initial performance of the devices slightly, has undesirable effects on the CH3NH3PbI3 film stability as well as on device hysteresis and stability.

Interplay of localized pyrene chromophores and π-conjugation in novel poly(2,7-pyrene) ladder polymers.

We present a detailed spectroscopic study, along with the synthesis, of conjugated, ladder-type 2,7-linked poly(pyrene)s. We observe a delocalization of the first singlet excited state along the polymer backbone, i.e., across the 2,7 linkage in the pyrene moiety, in contrast to earlier studies on conjugated 2,7-linked poly(pyrene)s without ladder structure. The electronic signature of the pyrene unit is, however, manifested in an increased lifetime and reduced oscillator strength as well as a modified vibronic progression in absorption of the singlet state compared to a ladder-type poly(para-phenylene) (MeLPPP). Furthermore, the reduced oscillator strength and increased lifetime slow down Förster-type energy transfer in films, where this transfer occurs to sites with increasing inter-chain coupling of H-type nature.

Integration of the catalytic subunit activates deneddylase activity in vivo as final step in fungal COP9 signalosome assembly.

The eight-subunit COP9 signalosome (CSN) is conserved from filamentous fungi to humans and functions at the interface between cellular signalling and protein half-life control. CSN consists of six PCI and two MPN domain proteins and forms a scaffold for additional interacting proteins. CSN controls protein stability in the ubiquitin-proteasome system where the MPN domain CSN5/CsnE subunit inactivates cullin-RING ligases. The CSN5/CsnE isopeptidase functions as deneddylase and removes the ubiquitin-like protein Nedd8. The six PCI domain proteins of human CSN form a horseshoe-like ring and all eight subunits are connected by a bundle of C-terminal α-helices. We show that single deletions of any csn subunit of Aspergillus nidulans resulted in the lack of deneddylase activity and identical defects in the coordination of development and secondary metabolism. The CSN1/CsnA N-terminus is dispensable for deneddylase activity but required for asexual spore formation. Complex analyses in mutant strains revealed the presence of a seven-subunit pre-CSN without catalytic activity. Reconstitution experiments with crude extracts of deletion strains and recombinant proteins allowed the integration of CSN5/CsnE into pre-CSN resulting in an active deneddylase. This supports a stable seven subunit pre-CSN intermediate where deneddylase activation in vivo can be controlled by CSN5/CsnE integration as final assembly step.

The devil is in the details: comparison between COP9 signalosome (CSN) and the LID of the 26S proteasome.

The COP9 signalosome (CSN) and the proteasomal LID are conserved macromolecular complexes composed of at least eight subunits with molecular weights of approximately 350 kDa. CSN and LID are part of the ubiquitin­proteasome pathway and cleave isopeptide linkages of lysine side chains on target proteins. CSN cleaves the isopeptide bond of ubiquitin-like protein Nedd8 from cullins, whereas the LID cleaves ubiquitin from target proteins sentenced for degradation. CSN and LID are structurally and functionally similar but the order of the assembly pathway seems to be different. The assembly differs in at least the last subunit joining the pre-assembled subcomplex. This review addresses the similarities and differences in structure, function and assembly of CSN and LID.

The influence of torsion on excimer formation in bipolar host materials for blue phosphorescent OLEDs.

We present a combined detailed spectroscopic and quantum chemical study on the bipolar host materials BPTRZ and MBPTRZ in solution and in neat film. In the two compounds, the hole transporting carbazole is separated from the electron transporting triazine moiety by a fully aromatic but non-conjugated meta-linked biphenyl unit. The two materials differ by an additional steric twist at the biphenyl in MBPTRZ, which is achieved by methyl-substitution in 2- and 2'-position of the biphenyl. We find that while the twist shifts the triplet state in MBPTRZ to higher energies (3.0 eV in solution) compared to BPTRZ (2.8 eV in solution), this also localizes electron density on the carbazole moiety, leading to excimer formation in neat films.

The effect of intermolecular interaction on excited states in p-DTS(FBTTH2)2.

Using optical spectroscopy in solution and thin film, and supported by quantum chemical calculations, we investigated the aggregation process of the donor-acceptor type molecule p-DTS(FBTTH2)2. We demonstrate that cooling a solution induces a disorder-order phase transition that proceeds in three stages analogous to the steps observed in semi-rigid conjugated polymers. By analyzing the spectra, we are able to identify the spectral signature of monomer and aggregate in absorption and emission. From this we find that in films, the fraction of aggregates is near 100% which is in contrast to films made from semi-rigid conjugated polymers.

Emission Enhancement and Intermittency in Polycrystalline Organolead Halide Perovskite Films.

Inorganic-organic halide organometal perovskites have demonstrated very promising performance for opto-electronic applications, such as solar cells, light-emitting diodes, lasers, single-photon sources, etc. However, the little knowledge on the underlying photophysics, especially on a microscopic scale, hampers the further improvement of devices based on this material. In this communication, correlated conventional photoluminescence (PL) characterization and wide-field PL imaging as a function of time are employed to investigate the spatially- and temporally-resolved PL in CH3NH3PbI3-xClx perovskite films. Along with a continuous increase of the PL intensity during light soaking, we also observe PL blinking or PL intermittency behavior in individual grains of these films. Combined with significant suppression of PL blinking in perovskite films coated with a phenyl-C61-butyric acid methyl ester (PCBM) layer, it suggests that this PL intermittency is attributed to Auger recombination induced by photoionized defects/traps or mobile ions within grains. These defects/traps are detrimental for light conversion and can be effectively passivated by the PCBM layer. This finding paves the way to provide a guideline on the further improvement of perovskite opto-electronic devices.

Triplet energies and excimer formation in meta- and para-linked carbazolebiphenyl matrix materials.

We present a spectroscopic investigation on the effect of changing the position where carbazole is attached to biphenyl in carbazolebiphenyl (CBP) on the triplet state energies and the propensity to excimer formation. For this, two CBP derivatives have been prepared with the carbazole moieties attached at the (para) 4- and 4(')-positions (pCBP) and at the (meta) 3- and 3(')-positions (mCBP) of the biphenyls. These compounds are compared to analogous mCDBP and pCDBP, i.e. two highly twisted carbazoledimethylbiphenyls, which have a high triplet energy at about 3.0 eV and tend to form triplet excimers in a neat film. This torsion in the structure is associated with localization of the excited state onto the carbazole moieties. We find that in mCBP and pCBP, excimer formation is prevented by localization of the triplet excited state onto the central moiety. As conjugation can continue from the central biphenyls into the nitrogen of the carbazole in the para-connected pCBP, emission involves mainly the benzidine. By contrast, the meta-linkage in mCBP limits conjugation to the central biphenyl. The associated shorter conjugation length is the reason for the higher triplet energy of 2.8 eV in mCBP compared with the 2.65 eV in pCBP.