ABSTRACT
PURPOSE: To determine if deep learning artificial intelligence algorithms can be used to accurately identify key morphologic landmarks on oocytes and cleavage stage embryo images for micromanipulation procedures such as intracytoplasmic sperm injection (ICSI) or assisted hatching (AH). METHODS: Two convolutional neural network (CNN) models were trained, validated, and tested over three replicates to identify key morphologic landmarks used to guide embryologists when performing micromanipulation procedures. The first model (CNN-ICSI) was trained (n = 13,992), validated (n = 1920), and tested (n = 3900) to identify the optimal location for ICSI through polar body identification. The second model (CNN-AH) was trained (n = 13,908), validated (n = 1908), and tested (n = 3888) to identify the optimal location for AH on the zona pellucida that maximizes distance from healthy blastomeres. RESULTS: The CNN-ICSI model accurately identified the polar body and corresponding optimal ICSI location with 98.9% accuracy (95% CI 98.5-99.2%) with a receiver operator characteristic (ROC) with micro and macro area under the curves (AUC) of 1. The CNN-AH model accurately identified the optimal AH location with 99.41% accuracy (95% CI 99.11-99.62%) with a ROC with micro and macro AUCs of 1. CONCLUSION: Deep CNN models demonstrate powerful potential in accurately identifying key landmarks on oocytes and cleavage stage embryos for micromanipulation. These findings are novel, essential stepping stones in the automation of micromanipulation procedures.
Subject(s)
Artificial Intelligence , Fertilization in Vitro , Male , Animals , Fertilization in Vitro/methods , Semen , Micromanipulation , Neural Networks, ComputerABSTRACT
PURPOSE: Deep learning neural networks have been used to predict the developmental fate and implantation potential of embryos with high accuracy. Such networks have been used as an assistive quality assurance (QA) tool to identify perturbations in the embryo culture environment which may impact clinical outcomes. The present study aimed to evaluate the utility of an AI-QA tool to consistently monitor ART staff performance (MD and embryologist) in embryo transfer (ET), embryo vitrification (EV), embryo warming (EW), and trophectoderm biopsy (TBx). METHODS: Pregnancy outcomes from groups of 20 consecutive elective single day 5 blastocyst transfers were evaluated for the following procedures: MD performed ET (N = 160 transfers), embryologist performed ET (N = 160 transfers), embryologist performed EV (N = 160 vitrification procedures), embryologist performed EW (N = 160 warming procedures), and embryologist performed TBx (N = 120 biopsies). AI-generated implantation probabilities for the same embryo cohorts were estimated, as were mean AI-predicted and actual implantation rates for each provider and compared using Wilcoxon singed-rank test. RESULTS: Actual implantation rates following ET performed by one MD provider: "H" was significantly lower than AI-predicted (20% vs. 61%, p = 0.001). Similar results were observed for one embryologist, "H" (30% vs. 60%, p = 0.011). Embryos thawed by embryologist "H" had lower implantation rates compared to AI prediction (25% vs. 60%, p = 0.004). There were no significant differences between actual and AI-predicted implantation rates for EV, TBx, or for the rest of the clinical staff performing ET or EW. CONCLUSIONS: AI-based QA tools could provide accurate, reproducible, and efficient staff performance monitoring in an ART practice.
Subject(s)
Artificial Intelligence , Cryopreservation , Pregnancy , Female , Humans , Cryopreservation/methods , Blastocyst , Embryo Implantation , Reproductive Techniques, Assisted , Pregnancy Rate , Retrospective StudiesABSTRACT
PURPOSE: To determine if creating voting ensembles combining convolutional neural networks (CNN), support vector machine (SVM), and multi-layer neural networks (NN) alongside clinical parameters improves the accuracy of artificial intelligence (AI) as a non-invasive method for predicting aneuploidy. METHODS: A cohort of 699 day 5 PGT-A tested blastocysts was used to train, validate, and test a CNN to classify embryos as euploid/aneuploid. All embryos were analyzed using a modified FAST-SeqS next-generation sequencing method. Patient characteristics such as maternal age, AMH level, paternal sperm quality, and total number of normally fertilized (2PN) embryos were processed using SVM and NN. To improve model performance, we created voting ensembles using CNN, SVM, and NN to combine our imaging data with clinical parameter variations. Statistical significance was evaluated with a one-sample t-test with 2 degrees of freedom. RESULTS: When assessing blastocyst images alone, the CNN test accuracy was 61.2% (± 1.32% SEM, n = 3 models) in correctly classifying euploid/aneuploid embryos (n = 140 embryos). When the best CNN model was assessed as a voting ensemble, the test accuracy improved to 65.0% (AMH; p = 0.1), 66.4% (maternal age; p = 0.06), 65.7% (maternal age, AMH; p = 0.08), 66.4% (maternal age, AMH, number of 2PNs; p = 0.06), and 71.4% (maternal age, AMH, number of 2PNs, sperm quality; p = 0.02) (n = 140 embryos). CONCLUSIONS: By combining CNNs with patient characteristics, voting ensembles can be created to improve the accuracy of classifying embryos as euploid/aneuploid from CNN alone, allowing for AI to serve as a potential non-invasive method to aid in karyotype screening and selection of embryos.
Subject(s)
Genetic Testing , Preimplantation Diagnosis , Pregnancy , Female , Male , Humans , Genetic Testing/methods , Preimplantation Diagnosis/methods , Artificial Intelligence , Semen , Ploidies , Aneuploidy , Blastocyst , Neural Networks, Computer , Retrospective StudiesABSTRACT
PURPOSE: To determine whether convolutional neural networks (CNN) can be used to accurately ascertain the patient identity (ID) of cleavage and blastocyst stage embryos based on image data alone. METHODS: A CNN model was trained and validated over three replicates on a retrospective cohort of 4889 time-lapse embryo images. The algorithm processed embryo images for each patient and produced a unique identification key that was associated with the patient ID at a timepoint on day 3 (~ 65 hours post-insemination (hpi)) and day 5 (~ 105 hpi) forming our data library. When the algorithm evaluated embryos at a later timepoint on day 3 (~ 70 hpi) and day 5 (~ 110 hpi), it generates another key that was matched with the patient's unique key available in the library. This approach was tested using 400 patient embryo cohorts on day 3 and day 5 and number of correct embryo identifications with the CNN algorithm was measured. RESULTS: CNN technology matched the patient identification within random pools of 8 patient embryo cohorts on day 3 with 100% accuracy (n = 400 patients; 3 replicates). For day 5 embryo cohorts, the accuracy within random pools of 8 patients was 100% (n = 400 patients; 3 replicates). CONCLUSIONS: This study describes an artificial intelligence-based approach for embryo identification. This technology offers a robust witnessing step based on unique morphological features of each embryo. This technology can be integrated with existing imaging systems and laboratory protocols to improve specimen tracking.
Subject(s)
Artificial Intelligence , Blastocyst , Humans , Retrospective Studies , Embryo, Mammalian , Neural Networks, ComputerABSTRACT
A low-cost and easy-to-fabricate microchip remains a key challenge for the development of true point-of-care (POC) diagnostics. Cellulose paper and plastic are thin, light, flexible, and abundant raw materials, which make them excellent substrates for mass production of POC devices. Herein, a hybrid paper-plastic microchip (PPMC) is developed, which can be used for both single and multiplexed detection of different targets, providing flexibility in the design and fabrication of the microchip. The developed PPMC with printed electronics is evaluated for sensitive and reliable detection of a broad range of targets, such as liver and colon cancer protein biomarkers, intact Zika virus, and human papillomavirus nucleic acid amplicons. The presented approach allows a highly specific detection of the tested targets with detection limits as low as 102 ng mL-1 for protein biomarkers, 103 particle per milliliter for virus particles, and 102 copies per microliter for a target nucleic acid. This approach can potentially be considered for the development of inexpensive and stable POC microchip diagnostics and is suitable for the detection of a wide range of microbial infections and cancer biomarkers.
ABSTRACT
Assessment of swine semen quality is important as it is used as an estimate of the fertility of an ejaculate. There are many methods to measure sperm morphology, concentration, and motility, however, some methods require expensive instrumentation or are not easy to use on-farm. A portable, low-cost, automated device could provide the potential to assess semen quality in field conditions. The objective of this study was to validate the use of Fertile-Eyez (FE), a smartphone-based device, to measure sperm concentration, total motility, and morphology in boar ejaculates. Semen from six sexually mature boars were collected and mixed to create a total of 18 unique semen samples for system evaluations. Each sample was then diluted to 1:4, 1:8, 1:10, and 1:16 (for concentration only) with Androhep Plus semen extender (n = 82 total). Sperm concentration was evaluated using FE and compared to results measured using a Nucleocounter and computer assisted sperm analysis (CASA: Ceros II, Hamilton Thorne). Sperm motility was evaluated using FE and CASA. Sperm morphological assessments were evaluated by a single technician manually counting abnormalities and compared to FE deep-learning technology. Data were analyzed using both descriptive statistics (mean, standard deviation, intra-assay coefficient of variance, and residual standard deviation [RSD]) and statistical tests (correlation analysis between devices and Bland-Altman methods). Concentration analysis was strongly correlated (n = 18; r > 0.967; P < 0.0001) among all devices and dilutions. Analysis of motility showed moderate correlation and was significant when all dilutions are analyzed together (n = 54; r = 0.558; P < 0.001). The regression analysis for motility also showed the RSD as 3.95% between FE and CASA indicating a tight fit between devices. This RSD indicates that FE can find boars with unacceptable motility (boars for example with less than 70%) which impact fertility and litter size. The Bland-Altman analysis showed that FE-estimated morphological assessment and the conventionally estimated morphological score were similar, with a mean difference of ~1% (%95 Limits of Agreement: -6.2 to 8.1; n = 17). The results of this experiment demonstrate that FE, a portable and automated smartphone-based device, is capable of assessing concentration, motility, and morphology of boar semen samples.
ABSTRACT
Deep learning-enabled smartphone-based image processing has significant advantages in the development of point-of-care diagnostics. Conventionally, most deep-learning applications require task specific large scale expertly annotated datasets. Therefore, these algorithms are oftentimes limited only to applications that have large retrospective datasets available for network development. Here, we report the possibility of utilizing adversarial neural networks to overcome this challenge by expanding the utility of non-specific data for the development of deep learning models. As a clinical model, we report the detection of fentanyl, a small molecular weight drug that is a type of opioid, at the point-of-care using a deep-learning empowered smartphone assay. We used the catalytic property of platinum nanoparticles (PtNPs) in a smartphone-enabled microchip bubbling assay to achieve high analytical sensitivity (detecting fentanyl at concentrations as low as 0.23 ng mL-1 in phosphate buffered saline (PBS), 0.43 ng mL-1 in human serum and 0.64 ng mL-1 in artificial human urine). Image-based inferences were made by our adversarial-based SPyDERMAN network that was developed using a limited dataset of 104 smartphone images of microchips with bubble signals from tests performed with known fentanyl concentrations and using our retrospective library of 17 573 non-specific bubbling-microchip images. The accuracy (± standard error of mean) of the developed system in determining the presence of fentanyl, when using a cutoff concentration of 1 ng mL-1, was 93 ± 0% in human serum (n = 100) and 95.3 ± 1.5% in artificial human urine (n = 100).
Subject(s)
Deep Learning , Metal Nanoparticles , Humans , Fentanyl , Retrospective Studies , Platinum , Image Processing, Computer-Assisted/methods , AlgorithmsABSTRACT
A critical factor that influences the success of an in-vitro fertilization (IVF) treatment cycle is the quality of the transferred embryo. Embryo morphology assessments, conventionally performed through manual microscopic analysis suffer from disparities in practice, selection criteria, and subjectivity due to the experience of the embryologist. Convolutional neural networks (CNNs) are powerful, promising algorithms with significant potential for accurate classifications across many object categories. Network architectures and hyper-parameters affect the efficiency of CNNs for any given task. Here, we evaluate multi-layered CNNs developed from scratch and popular deep-learning architectures such as Inception v3, ResNET-50, Inception-ResNET-v2, NASNetLarge, ResNeXt-101, ResNeXt-50, and Xception in differentiating between embryos based on their morphological quality at 113 h post insemination (hpi). Xception performed the best in differentiating between the embryos based on their morphological quality.
ABSTRACT
In machine learning for image-based medical diagnostics, supervised convolutional neural networks are typically trained with large and expertly annotated datasets obtained using high-resolution imaging systems. Moreover, the network's performance can degrade substantially when applied to a dataset with a different distribution. Here, we show that adversarial learning can be used to develop high-performing networks trained on unannotated medical images of varying image quality. Specifically, we used low-quality images acquired using inexpensive portable optical systems to train networks for the evaluation of human embryos, the quantification of human sperm morphology and the diagnosis of malarial infections in the blood, and show that the networks performed well across different data distributions. We also show that adversarial learning can be used with unlabelled data from unseen domain-shifted datasets to adapt pretrained supervised networks to new distributions, even when data from the original distribution are not available. Adaptive adversarial networks may expand the use of validated neural-network models for the evaluation of data collected from multiple imaging systems of varying quality without compromising the knowledge stored in the network.
Subject(s)
Image Interpretation, Computer-Assisted/statistics & numerical data , Malaria, Falciparum/diagnostic imaging , Neural Networks, Computer , Spermatozoa/ultrastructure , Supervised Machine Learning , Datasets as Topic , Embryo, Mammalian/diagnostic imaging , Embryo, Mammalian/ultrastructure , Female , Histocytochemistry/methods , Humans , Malaria, Falciparum/parasitology , Male , Microscopy/methods , Plasmodium falciparum/ultrastructure , Time-Lapse Imaging/methods , Time-Lapse Imaging/statistics & numerical dataABSTRACT
Deep-learning (DL)-based image processing has potential to revolutionize the use of smartphones in mobile health (mHealth) diagnostics of infectious diseases. However, the high variability in cellphone image data acquisition and the common need for large amounts of specialist-annotated images for traditional DL model training may preclude generalizability of smartphone-based diagnostics. Here, we employed adversarial neural networks with conditioning to develop an easily reconfigurable virus diagnostic platform that leverages a dataset of smartphone-taken microfluidic chip photos to rapidly generate image classifiers for different target pathogens on-demand. Adversarial learning was also used to augment this real image dataset by generating 16,000 realistic synthetic microchip images, through style generative adversarial networks (StyleGAN). We used this platform, termed smartphone-based pathogen detection resource multiplier using adversarial networks (SPyDERMAN), to accurately detect different intact viruses in clinical samples and to detect viral nucleic acids through integration with CRISPR diagnostics. We evaluated the performance of the system in detecting five different virus targets using 179 patient samples. The generalizability of the system was confirmed by rapid reconfiguration to detect SARS-CoV-2 antigens in nasal swab samples (n = 62) with 100% accuracy. Overall, the SPyDERMAN system may contribute to epidemic preparedness strategies by providing a platform for smartphone-based diagnostics that can be adapted to a given emerging viral agent within days of work.
Subject(s)
COVID-19 Testing/instrumentation , COVID-19 Testing/methods , COVID-19/diagnosis , Deep Learning , Signal Processing, Computer-Assisted , Telemedicine/methods , Antigens, Viral/isolation & purification , CRISPR-Cas Systems , Communicable Disease Control , Disaster Planning , Humans , Image Processing, Computer-Assisted/methods , Metal Nanoparticles/chemistry , Neural Networks, Computer , Platinum , Point-of-Care Testing , Public Health , Reproducibility of Results , SmartphoneABSTRACT
OBJECTIVE: To evaluate the consistency and objectivity of deep neural networks in embryo scoring and making disposition decisions for biopsy and cryopreservation in comparison to grading by highly trained embryologists. DESIGN: Prospective double-blind study using retrospective data. SETTING: U.S.-based large academic fertility center. PATIENTS: Not applicable. INTERVENTION(S): Embryo images (748 recorded at 70 hours postinsemination [hpi]) and 742 at 113 hpi) were used to evaluate embryologists and neural networks in embryo grading. The performance of 10 embryologists and a neural network were also evaluated in disposition decision making using 56 embryos. MAIN OUTCOME MEASURES: Coefficients of variation (%CV) and measures of consistencies were compared. RESULTS: Embryologists exhibited a high degree of variability (%CV averages: 82.84% for 70 hpi and 44.98% for 113 hpi) in grading embryo. When selecting blastocysts for biopsy or cryopreservation, embryologists had an average consistency of 52.14% and 57.68%, respectively. The neural network outperformed the embryologists in selecting blastocysts for biopsy and cryopreservation with a consistency of 83.92%. Cronbach's α analysis revealed an α coefficient of 0.60 for the embryologists and 1.00 for the network. CONCLUSIONS: The results of our study show a high degree of interembryologist and intraembryologist variability in scoring embryos, likely due to the subjective nature of traditional morphology grading. This may ultimately lead to less precise disposition decisions and discarding of viable embryos. The application of a deep neural network, as shown in our study, can introduce improved reliability and high consistency during the process of embryo selection and disposition, potentially improving outcomes in an embryology laboratory.
Subject(s)
Deep Learning , Embryo, Mammalian/diagnostic imaging , Embryology/methods , Neural Networks, Computer , Deep Learning/trends , Double-Blind Method , Embryo, Mammalian/embryology , Embryology/trends , Humans , Prospective Studies , Retrospective Studies , Time-Lapse Imaging/methods , Time-Lapse Imaging/trendsABSTRACT
Emerging and reemerging infections present an ever-increasing challenge to global health. Here, we report a nanoparticle-enabled smartphone (NES) system for rapid and sensitive virus detection. The virus is captured on a microchip and labeled with specifically designed platinum nanoprobes to induce gas bubble formation in the presence of hydrogen peroxide. The formed bubbles are controlled to make distinct visual patterns, allowing simple and sensitive virus detection using a convolutional neural network (CNN)-enabled smartphone system and without using any optical hardware smartphone attachment. We evaluated the developed CNN-NES for testing viruses such as hepatitis B virus (HBV), HCV, and Zika virus (ZIKV). The CNN-NES was tested with 134 ZIKV- and HBV-spiked and ZIKV- and HCV-infected patient plasma/serum samples. The sensitivity of the system in qualitatively detecting viral-infected samples with a clinically relevant virus concentration threshold of 250 copies/ml was 98.97% with a confidence interval of 94.39 to 99.97%.
ABSTRACT
Deep learning in in vitro fertilization is currently being evaluated in the development of assistive tools for the determination of transfer order and implantation potential using time-lapse data collected through expensive imaging hardware. Assistive tools and algorithms that can work with static images, however, can help in improving the access to care by enabling their use with images acquired from traditional microscopes that are available to virtually all fertility centers. Here, we evaluated the use of a deep convolutional neural network (CNN), trained using single timepoint images of embryos collected at 113 hr post-insemination, in embryo selection amongst 97 clinical patient cohorts (742 embryos) and observed an accuracy of 90% in choosing the highest quality embryo available. Furthermore, a CNN trained to assess an embryo's implantation potential directly using a set of 97 euploid embryos capable of implantation outperformed 15 trained embryologists (75.26% vs. 67.35%, p<0.0001) from five different fertility centers.
Around one in seven couples have trouble conceiving, which means there is a high demand for solutions such as in vitro fertilization, also known as IVF. This process involves fertilizing and developing embryos in the laboratory and then selecting a few to implant into the womb of the patient. IVF, however, only has a 30% success rate, is expensive and can be both mentally and physically taxing for patients. Selecting the right embryos to implant is therefore extremely important, as this increases the chance of success, minimizes complications and ensures the baby will be healthy. Currently the tools available for making this decision are limited, highly subjective, time-consuming, and often extremely expensive. As a result, embryologists often rely on their experience and observational skills when choosing which embryos to implant, which can lead to a lot of variability. An automated system based on artificial intelligence (AI) could therefore improve IVF success rates by assisting embryologists with this decision and ensuring more consistent results. The AI system could learn how embryos develop over time and then uses this information to select the best embryos to implant from just a single image. This would offer a cheaper alternative to current analysis tools that are only available at the most expensive IVF clinics. Now, Bormann, Kanakasabapathy, Thirumalaraj et al. have developed an AI system for IVF based on thousands of images of embryos. Using individual images, the system selected embryos of a comparable quality to those selected by a human specialist. It also showed a greater ability to identify embryos that will lead to successful implantation. Indeed, the software outperformed 15 embryologists from five different centers across the United States in detecting which embryos were most likely to implant out of a group of high-quality embryos with few visible differences. Artificial intelligence has many potential applications to support expert clinical decision-making. Systems like these could improve success, reduce errors and lead to faster, cheaper and more accessible results. Beyond immediate IVF applications, this system could also be used in research and industry to help understand differences in embryo quality.
Subject(s)
Blastocyst/classification , Deep Learning , Fertilization in Vitro/methods , Image Processing, Computer-Assisted/methods , Adult , Algorithms , Blastocyst/cytology , Blastocyst/physiology , Female , Humans , Male , Microscopy , Pregnancy , Pregnancy OutcomeABSTRACT
The fundamental test for male infertility, semen analysis, is mostly a manually performed subjective and time-consuming process and the use of automated systems has been cost prohibitive. We have previously developed an inexpensive smartphone-based system for at-home male infertility screening through automatic and rapid measurement of sperm concentration and motility. Here, we assessed the feasibility of using a similar smartphone-based system for laboratory use in measuring: a) Hyaluronan Binding Assay (HBA) score, a quantitative score describing the sperm maturity and fertilization potential in a semen sample, b) sperm viability, which assesses sperm membrane integrity, and c) sperm DNA fragmentation that assesses the degree of DNA damage. There was good correlation between the manual analysis and smartphone-based analysis for the HBA score when the device was tested with 31 fresh, unprocessed human semen samples. The smartphone-based approach performed with an accuracy of 87% in sperm classification when the HBA score was set at manufacturer's threshold of 80. Similarly, the sperm viability and DNA fragmentation tests were also shown to be compatible with the smartphone-based system when tested with 102 and 47 human semen samples, respectively.
Subject(s)
Cell Survival , DNA Fragmentation , Mobile Applications , Semen Analysis/instrumentation , Smartphone , Sperm Maturation , Adult , Humans , MaleABSTRACT
Embryo assessment and selection is a critical step in an in vitro fertilization (IVF) procedure. Current embryo assessment approaches such as manual microscopy analysis done by embryologists or semi-automated time-lapse imaging systems are highly subjective, time-consuming, or expensive. Availability of cost-effective and easy-to-use hardware and software for embryo image data acquisition and analysis can significantly empower embryologists towards more efficient clinical decisions both in resource-limited and resource-rich settings. Here, we report the development of two inexpensive (<$100 and <$5) and automated imaging platforms that utilize advances in artificial intelligence (AI) for rapid, reliable, and accurate evaluations of embryo morphological qualities. Using a layered learning approach, we have shown that network models pre-trained with high quality embryo image data can be re-trained using data recorded on such low-cost, portable optical systems for embryo assessment and classification when relatively low-resolution image data are used. Using two test sets of 272 and 319 embryo images recorded on the reported stand-alone and smartphone optical systems, we were able to classify embryos based on their cell morphology with >90% accuracy.
Subject(s)
Blastocyst , Deep Learning , Embryonic Development , Image Processing, Computer-Assisted , Time-Lapse Imaging , Fertilization in Vitro , HumansABSTRACT
HIV-1 infection is a major health threat in both developed and developing countries. The integration of mobile health approaches and bioengineered catalytic motors can allow the development of sensitive and portable technologies for HIV-1 management. Here, we report a platform that integrates cellphone-based optical sensing, loop-mediated isothermal DNA amplification and micromotor motion for molecular detection of HIV-1. The presence of HIV-1 RNA in a sample results in the formation of large-sized amplicons that reduce the motion of motors. The change in the motors motion can be accurately measured using a cellphone system as the biomarker for target nucleic acid detection. The presented platform allows the qualitative detection of HIV-1 (n = 54) with 99.1% specificity and 94.6% sensitivity at a clinically relevant threshold value of 1000 virus particles/ml. The cellphone system has the potential to enable the development of rapid and low-cost diagnostics for viruses and other infectious diseases.
Subject(s)
Cell Phone , HIV Infections/diagnosis , HIV-1/genetics , Metal Nanoparticles/chemistry , Nucleic Acid Amplification Techniques/methods , DNA, Viral , Humans , Lab-On-A-Chip Devices , Platinum/chemistry , RNA, Viral/analysis , RNA, Viral/blood , Reproducibility of Results , Sensitivity and Specificity , SoftwareABSTRACT
Zika virus (ZIKV) infection is an emerging pandemic threat to humans that can be fatal in newborns. Advances in digital health systems and nanoparticles can facilitate the development of sensitive and portable detection technologies for timely management of emerging viral infections. Here we report a nanomotor-based bead-motion cellphone (NBC) system for the immunological detection of ZIKV. The presence of virus in a testing sample results in the accumulation of platinum (Pt)-nanomotors on the surface of beads, causing their motion in H2O2 solution. Then the virus concentration is detected in correlation with the change in beads motion. The developed NBC system was capable of detecting ZIKV in samples with virus concentrations as low as 1 particle/µL. The NBC system allowed a highly specific detection of ZIKV in the presence of the closely related dengue virus and other neurotropic viruses, such as herpes simplex virus type 1 and human cytomegalovirus. The NBC platform technology has the potential to be used in the development of point-of-care diagnostics for pathogen detection and disease management in developed and developing countries.
Subject(s)
Cell Phone , Metal Nanoparticles/chemistry , Platinum/chemistry , Zika Virus Infection/diagnosis , Zika Virus Infection/virology , Zika Virus/isolation & purification , Humans , Point-of-Care Systems , Zika Virus/immunologyABSTRACT
The ability to accurately predict ovulation at-home using low-cost point-of-care diagnostics can be of significant help for couples who prefer natural family planning. Detecting ovulation-specific hormones in urine samples and monitoring basal body temperature are the current commonly home-based methods used for ovulation detection; however, these methods, relatively, are expensive for prolonged use and the results are difficult to comprehend. Here, we report a smartphone-based point-of-care device for automated ovulation testing using artificial intelligence (AI) by detecting fern patterns in a small volume (<100 µL) of saliva that is air-dried on a microfluidic device. We evaluated the performance of the device using artificial saliva and human saliva samples and observed that the device showed >99% accuracy in effectively predicting ovulation.
Subject(s)
Ovulation Detection/instrumentation , Point-of-Care Testing , Smartphone , Adult , Artificial Intelligence , Equipment Design , Female , Humans , Models, Biological , Ovulation Detection/methods , Saliva/chemistry , Young AdultABSTRACT
The diagnosis of keratitis is based on visual exam, tissue cytology, and standard microbial culturing to determine the type of the infectious pathogen. To prescribe appropriate therapy, it is important to distinguish between bacterial, fungal, and viral keratitis, as the treatments are quite different. Diagnosis of the causative organism has a substantial prognostic importance. Further, timely knowledge of the nature of the pathogen is also critical to adapt therapy in patients unresponsive to empiric treatment options, which occurs in 10% of all cases. Currently, the identification of the nature of the pathogen that causes keratitis is achieved via microbial culture screening, which is laboratory-based, expensive, and time-consuming. The most frequent pathogens that cause the corneal ulcers are P. aeruginosa and S. aureus. Here, we report a microchip for rapid (<1h) detection of P. aeruginosa (6294), S. aureus(LAC), through on-chip electrical sensing of bacterial lysate. We evaluated the microchip with spiked samples of PBS with bacteria concentration between 101 to 108 CFU/mL. The least diluted bacteria concentration in bacteria-spiked samples with statistically significant impedance change was 10 CFU/mL. We further validated our assay by comparing our microchip results with the standard culture-based methods using eye washes obtained from 13 infected mice.
Subject(s)
Keratitis/diagnosis , Point-of-Care Systems , Pseudomonas Infections/diagnosis , Pseudomonas aeruginosa/isolation & purification , Staphylococcal Infections/diagnosis , Staphylococcus aureus/isolation & purification , Tears/microbiology , Animals , Biosensing Techniques/instrumentation , Electric Impedance , Equipment Design , Humans , Keratitis/microbiology , Lab-On-A-Chip Devices , Limit of Detection , Mice , Mice, Inbred C57BL , Pseudomonas Infections/microbiology , Staphylococcal Infections/microbiologyABSTRACT
Rapid and sensitive point-of-care diagnostics are of paramount importance for early detection of infectious diseases and timely initiation of treatment. Here, we present cellulose paper and flexible plastic chips with printed graphene-modified silver electrodes as universal point-of-care diagnostic tools for the rapid and sensitive detection of microbial pathogens or nucleic acids through utilizing electrical sensing modality and loop-mediated isothermal amplification (LAMP). We evaluated the ability of the developed paper-based assay to detect (i) viruses on cellulose-based paper microchips without implementing amplification in samples with viral loads between 106 and 108 copies per ml, and (ii) amplified HIV-1 nucleic acids in samples with viral loads between 10 fg µl-1 and 108 fg µl-1. The target HIV-1 nucleic acid was amplified using the RT-LAMP technique and detected through the electrical sensing of LAMP amplicons for a broad range of RNA concentrations between 10 fg µl-1 and 108 fg µl-1 after 40 min of amplification time. Our assay may be used for antiretroviral therapy monitoring where it meets the sensitivity requirement of the World Health Organization guidelines. Such a paper microchip assay without the amplification step may also be considered as a simple and inexpensive approach for acute HIV detection where maximum viral replication occurs.