Enzymatic Enantioselective anti-Markovnikov Hydration of Aryl Alkenes.

The addition of water to alkenes is an important method for the synthesis of alcohols, but the regioselectivity of acid-catalyzed hydration of terminal alkenes yields secondary alcohols according to Markovnikov's rule, making it difficult to obtain primary alcohols. Here we report a styrene monooxygenase that catalyzes the anti-Markovnikov hydration of the terminal aryl alkenes under anaerobic conditions. This hydration provides primary alcohols in good yields (up to 100 %), excellent anti-Markovnikov regioselectivity (>99 : 1), and good enantiomeric purity (60-83 % ee). Residues Asn46, Asp100, and Asn309 are essential for catalysis suggesting an acid-base mechanism with a carbanion-like intermediate that could account for the anti-Markovnikov regioselectivity. Our work reveals a new enzymatic tool with unusual regioselectivity based on the promiscuous catalytic activity of a monooxygenase.

High-Level Production of Lysine in the Yeast Saccharomyces cerevisiae by Rational Design of Homocitrate Synthase.

Homocitrate synthase (HCS) catalyzes the aldol condensation of 2-oxoglutarate (2-OG) and acetyl coenzyme A (AcCoA) to form homocitrate, which is the first enzyme of the lysine biosynthetic pathway in the yeast Saccharomyces cerevisiae. The HCS activity is tightly regulated via feedback inhibition by the end product lysine. Here, we designed a feedback inhibition-insensitive HCS of S. cerevisiae (ScLys20) for high-level production of lysine in yeast cells. In silico docking of the substrate 2-OG and the inhibitor lysine to ScLys20 predicted that the substitution of serine with glutamate at position 385 would be more suitable for desensitization of the lysine feedback inhibition than the substitution from serine to phenylalanine in the already known Ser385Phe variant. Enzymatic analysis revealed that the Ser385Glu variant is far more insensitive to feedback inhibition than the Ser385Phe variant. We also found that the lysine contents in yeast cells expressing the Ser385Glu variant were 4.62- and 1.47-fold higher than those of cells expressing the wild-type HCS and Ser385Phe variant, respectively, due to the extreme desensitization to feedback inhibition. In this study, we obtained highly feedback inhibition-insensitive HCS using in silico docking and enzymatic analysis. Our results indicate that the rational engineering of HCS for feedback inhibition desensitization by lysine could be useful for constructing new yeast strains with higher lysine productivity. IMPORTANCE A traditional method for screening toxic analogue-resistant mutants has been established for the breeding of microbes that produce high levels of amino acids, including lysine. However, another efficient strategy is required to further improve their productivity. Homocitrate synthase (HCS) catalyzes the first step of lysine biosynthesis in the yeast Saccharomyces cerevisiae, and its activity is subject to feedback inhibition by lysine. Here, in silico design of a key enzyme that regulates the biosynthesis of lysine was utilized to increase the productivity of lysine. We designed HCS for the high-level production of lysine in yeast cells by in silico docking simulation. The engineered HCS exhibited much less sensitivity to lysine and conferred higher production of lysine than the already known variant obtained by traditional breeding. The combination of in silico design and experimental analysis of a key enzyme will contribute to advances in metabolic engineering for the construction of industrial microorganisms.

Engineering more stable proteins.

Protein function requires the folded protein form, but this form is unstable mainly because it readily unfolds into a flexible, unstructured form. Protein folding is favored by burying of hydrophobic side chains and hydrogen bonding between the amino acids. Protein unfolding is favored by the increase in conformational freedom of the main chain of amino acids upon unfolding. Protein stability is usually measured by the reversible unfolding of the protein with either heat or chemical additives like urea. Engineering mores stable proteins involves making substitutions that shift the folding-unfolding balance toward the folded form. Stabilizing substitutions can either stabilize the folded conformation or destabilize the unfolded ensemble. This tutorial emphasizes web-based tools to identify substitutions that stabilize proteins. Besides unfolding, other sources of protein instability are chemical modifications like oxidations or cleavage by proteases and aggregation of partly unfolded proteins into insoluble particles.

Comparison of Five Protein Engineering Strategies for Stabilizing an α/ß-Hydrolase.

A review of the previous stabilization of α/ß-hydrolase fold enzymes revealed many different strategies, but no comparison of strategies on the same enzyme. For this reason, we compared five strategies to identify stabilizing mutations in a model α/ß-hydrolase fold enzyme, salicylic acid binding protein 2, to reversible denaturation by urea and to irreversible denaturation by heat. The five strategies included one location agnostic approach (random mutagenesis using error-prone polymerase chain reaction), two structure-based approaches [computational design (Rosetta, FoldX) and mutation of flexible regions], and two sequence-based approaches (addition of proline at locations where a more stable homologue has proline and mutation to consensus). All strategies identified stabilizing mutations, but the best balance of success rate, degree of stabilization, and ease of implementation was mutation to consensus. A web-based automated program that predicts substitutions needed to mutate to consensus is available at http://kazlab.umn.edu .

Evolution of a Catalytic Mechanism.

The means by which superfamilies of specialized enzymes arise by gene duplication and functional divergence are poorly understood. The escape from adaptive conflict hypothesis, which posits multiple copies of a gene encoding a primitive inefficient and highly promiscuous generalist ancestor, receives support from experiments showing that resurrected ancestral enzymes are indeed more substrate-promiscuous than their modern descendants. Here, we provide evidence in support of an alternative model, the innovation-amplification-divergence hypothesis, which posits a single-copied ancestor as efficient and specific as any modern enzyme. We argue that the catalytic mechanisms of plant esterases and descendent acetone cyanohydrin lyases are incompatible with each other (e.g., the reactive substrate carbonyl must bind in opposite orientations in the active site). We then show that resurrected ancestral plant esterases are as catalytically specific as modern esterases, that the ancestor of modern acetone cyanohydrin lyases was itself only very weakly promiscuous, and that improvements in lyase activity came at the expense of esterase activity. These observations support the innovation-amplification-divergence hypothesis, in which an ancestor gains a weak promiscuous activity that is improved by selection at the expense of the ancestral activity, and not the escape from adaptive conflict in which an inefficient generalist ancestral enzyme steadily loses promiscuity throughout the transition to a highly active specialized modern enzyme.

Catalytic Promiscuity of Ancestral Esterases and Hydroxynitrile Lyases.

Catalytic promiscuity is a useful, but accidental, enzyme property, so finding catalytically promiscuous enzymes in nature is inefficient. Some ancestral enzymes were branch points in the evolution of new enzymes and are hypothesized to have been promiscuous. To test the hypothesis that ancestral enzymes were more promiscuous than their modern descendants, we reconstructed ancestral enzymes at four branch points in the divergence hydroxynitrile lyases (HNL's) from esterases ∼ 100 million years ago. Both enzyme types are α/ß-hydrolase-fold enzymes and have the same catalytic triad, but differ in reaction type and mechanism. Esterases catalyze hydrolysis via an acyl enzyme intermediate, while lyases catalyze an elimination without an intermediate. Screening ancestral enzymes and their modern descendants with six esterase substrates and six lyase substrates found higher catalytic promiscuity among the ancestral enzymes (P < 0.01). Ancestral esterases were more likely to catalyze a lyase reaction than modern esterases, and the ancestral HNL was more likely to catalyze ester hydrolysis than modern HNL's. One ancestral enzyme (HNL1) along the path from esterase to hydroxynitrile lyases was especially promiscuous and catalyzed both hydrolysis and lyase reactions with many substrates. A broader screen tested mechanistically related reactions that were not selected for by evolution: decarboxylation, Michael addition, γ-lactam hydrolysis and 1,5-diketone hydrolysis. The ancestral enzymes were more promiscuous than their modern descendants (P = 0.04). Thus, these reconstructed ancestral enzymes are catalytically promiscuous, but HNL1 is especially so.

Production of p-hydroxybenzoic acid from p-coumaric acid by Burkholderia glumae BGR1.

p-Coumaric acid (pCA) is abundant in biomass with low lignin content, such as straw and stubble from rye, wheat, and barley. pCA can be isolated from biomass and used for the synthesis of aromatic hydrocarbons. Here, we report engineering of the natural pathway for conversion of pCA into p-hydroxybenzoic acid (pHBA) to increase the amount of pHBA that accumulates more than 100-fold. Burkholderia glumae strain BGR1 (BGR1) grows efficiently on pCA as a sole carbon source via a CoA-dependent non-ß-oxidation pathway. This pathway removes two carbons from pCA as acetyl-CoA yielding p-hydroxybenzaldehyde and subsequently oxidizes it to pHBA. To increase the amount of accumulated pHBA in BGR1, we first deleted two genes encoding enzymes that degrade pHBA in the ß-ketoadipate pathway. At 10 mM of pCA, the double deletion mutant BGR1_PB4 (Δphb3hΔbcl) accumulated pHBA with 95% conversion, while the control BGR1 accumulated only with 11.2% conversion. When a packed bed reactor containing immobilized BGR1_PB4 cells was operated at a dilution rate 0.2 h(-1) , the productivity of pHBA was achieved at 9.27 mg/L/h for 134 h. However, in a batch reactor at 20 mM pCA, growth of BGR1_PB4 was strongly inhibited, resulting in a low conversion of 19.3%. To further increase the amount of accumulated pCA, we identified the first enzyme in the pathway, p-hydroxcinnmaoyl-CoA synthetase II (phcs II), as the rate-limiting enzyme. Over expression of phcs II using a Palk promoter in a batch reaction at 20 mM of pCA yielded 99.0% conversion to pHBA, which is the highest concentration of pHBA ever reported using a biological process. Biotechnol. Bioeng. 2016;113: 1493-1503. © 2015 Wiley Periodicals, Inc.

Stabilization of an α/ß-Hydrolase by Introducing Proline Residues: Salicylic Acid Binding Protein 2 from Tobacco.

α/ß-Hydrolases are important enzymes for biocatalysis, but their stability often limits their application. We investigated a plant esterase, salicylic acid binding protein 2 (SABP2), as a model α/ß-hydrolase. SABP2 shows typical stability to urea (unfolding free energy 6.9 ± 1.5 kcal/mol) and to heat inactivation (T1/2 15min 49.2 ± 0.5 °C). Denaturation in urea occurs in two steps, but heat inactivation occurs in a single step. The first unfolding step in urea eliminates catalytic activity. Surprisingly, we found that the first unfolding likely corresponds to the unfolding of the larger catalytic domain. Replacing selected amino acid residues with proline stabilized SABP2. Proline restricts the flexibility of the unfolded protein, thereby shifting the equilibrium toward the folded conformation. Seven locations for proline substitution were chosen either by amino acid sequence alignment with a more stable homologue or by targeting flexible regions in SABP2. Introducing proline in the catalytic domain stabilized SABP2 to the first unfolding in urea for three of five cases: L46P (+0.2 M urea), S70P (+0.1), and E215P (+0.9). Introducing proline in the cap domain did not stabilize SABP2 (two of two cases), supporting the assignment that the first unfolding corresponds to the catalytic domain. Proline substitutions in both domains stabilized SABP2 to heat inactivation: L46P (ΔT1/2 15min = +6.4 °C), S70P (+5.4), S115P (+1.8), S141P (+4.9), and E215P (+4.2). Combining substitutions did not further increase the stability to urea denaturation, but dramatically increased resistance to heat inactivation: L46P−S70P ΔT1/2 15min = +25.7 °C. This straightforward proline substitution approach may also stabilize other α/ß-hydrolases.

Increasing the reaction rate of hydroxynitrile lyase from Hevea brasiliensis toward mandelonitrile by copying active site residues from an esterase that accepts aromatic esters.

The natural substrate of hydroxynitrile lyase from rubber tree (HbHNL, Hevea brasiliensis) is acetone cyanohydrin, but synthetic applications usually involve aromatic cyanohydrins such as mandelonitrile. To increase the activity of HbHNL toward this unnatural substrate, we replaced active site residues in HbHNL with the corresponding ones from esterase SABP2 (salicylic acid binding protein 2). Although this enzyme catalyzes a different reaction (hydrolysis of esters), its natural substrate (methyl salicylate) contains an aromatic ring. Three of the eleven single-amino-acid-substitution variants of HbHNL reacted more rapidly with mandelonitrile. The best was HbHNL-L121Y, with a kcat 4.2 times higher and high enantioselectivity. Site-saturation mutagenesis at position 121 identified three other improved variants. We hypothesize that the smaller active site orients the aromatic substrate more productively.

Development of colorimetric HTS assay of cytochrome p450 for ortho-specific hydroxylation, and engineering of CYP102D1 with enhanced catalytic activity and regioselectivity.

A current challenge in high-throughput screening (HTS) of hydroxylation reactions by P450 is a fast and sensitive assay for regioselective hydroxylation against millions of mutants. We have developed a solid-agar plate-based HTS assay for screening ortho-specific hydroxylation of daidzein by sensing formaldehyde generated from the O-dealkylation reaction. This method adopts a colorimetric dye, pararosaniline, which has previously been used as an aldehyde-specific probe within cells. The rationale for this method lies in the fact that the hydroxylation activity at ortho-carbon position to COH correlates with a linear relationship to O-dealkylation activity on chemically introduced methoxy group at the corresponding COH. As a model system, a 4',7-dihydroxyisoflavone (daidzein) hydroxylase (CYP102D1 F96V/M246I), which catalyzes hydroxylation at ortho positions of the daidzein A/B-ring, was examined for O-dealklyation activity, by using permethylated daidzein as a surrogate substrate. By using the developed indirect bishydroxylation screening assay, the correlation coefficient between O-dealkylation and bishydroxylation activity for the template enzyme was 0.72. For further application of this assay, saturation mutants at A273/G274/T277 were examined by mutant screening with a permethylated daidzein analogue substrate (A-ring inactivated in order to find enhanced 3'-regioselectiviy). The whole-cell biotransformation of daidzein by final screened mutant G1 (A273H/G274E/T277G) showed fourfold increased conversion yield, with 14.3 mg L(-1) production titer and greatly increased 3'-regioselectiviy (3'/6=11.8). These results show that there is a remarkably high correlation (both in vitro and in vivo), thus suggesting that this assay would be ideal for a primary HTS assay for P450 reactions.

New structural motif for carboxylic acid perhydrolases.

Some serine hydrolases also catalyze a promiscuous reaction--reversible perhydrolysis of carboxylic acids to make peroxycarboxylic acids. Five X-ray crystal structures of these carboxylic acid perhydrolases show a proline in the oxyanion loop. Here, we test whether this proline is essential for high perhydrolysis activity using Pseudomonas fluorescens esterase (PFE). The L29P variant of this esterase catalyzes perhydrolysis 43-fold faster (k(cat) comparison) than the wild type. Surprisingly, saturation mutagenesis at the 29 position of PFE identified six other amino acid substitutions that increase perhydrolysis of acetic acid at least fourfold over the wild type. The best variant, L29I PFE, catalyzed perhydrolysis 83-times faster (k(cat) comparison) than wild-type PFE and twice as fast as L29P PFE. Despite the different amino acid in the oxyanion loop, L29I PFE shows a similar selectivity for hydrogen peroxide over water as L29P PFE (ß(0)=170 vs. 160 M(-1)), and a similar fast formation of acetyl-enzyme (140 vs. 62 U mg(-1)). X-ray crystal structures of L29I PFE with and without bound acetate show an unusual mixture of two different oxyanion loop conformations. The type II ß-turn conformation resembles the wild-type structure and is unlikely to increase perhydrolysis, but the type I ß-turn conformation creates a binding site for a second acetate. Modeling suggests that a previously proposed mechanism for L29P PFE can be extended to include L29I PFE, so that an acetate accepts a hydrogen bond to promote faster formation of the acetyl-enzyme.

Bioconversion of p-coumaric acid to p-hydroxystyrene using phenolic acid decarboxylase from B. amyloliquefaciens in biphasic reaction system.

Phenolic acid decarboxylase (PAD) catalyzes the non-oxidative decarboxylation of p-coumaric acid (pCA) to p-hydroxystyrene (pHS). PAD from Bacillus amyloliquefaciens (BAPAD), which showed k (cat)/K (m) value for pCA (9.3 × 10³ mM⁻¹ s⁻¹), was found as the most active one using the "Subgrouping Automata" program and by comparing enzyme activity. However, the production of pHS of recombinant Escherichia coli harboring BAPAD showed only a 22.7 % conversion yield due to product inhibition. Based on the partition coefficient of pHS and biocompatibility of the cell, 1-octanol was selected for the biphasic reaction. The conversion yield increased up to 98.0 % and 0.83 g/h/g DCW productivity was achieved at 100 mM pCA using equal volume of 1-octanol as an organic solvent. In the optimized biphasic reactor, using a three volume ratio of 1-octanol to phosphate buffer phase (50 mM, pH 7.0), the recombinant E. coli produced pHS with a 88.7 % conversion yield and 1.34 g/h/g DCW productivity at 300 mM pCA.

Identifying Key Residues in Lysine Decarboxylase for Soluble Expression Using Consensus Design Soluble Mutant Screening (ConsenSing).

Although recent advances in deep learning approaches for protein engineering have enabled quick prediction of hot spot residues improving protein solubility, the predictions do not always correspond to an actual increase in solubility under experimental conditions. Therefore, developing methods that rapidly confirm the linkage between computational predictions and empirical results is essential to the success of improving protein solubility of target proteins. Here, we present a simple hybrid approach to computationally predict hot spots possibly improving protein solubility by sequence-based analysis and empirically explore valuable mutants using split GFP as a reporter system. Our approach, Consensus design Soluble Mutant Screening (ConsenSing), utilizes consensus sequence prediction to find hot spots for improvement of protein solubility and constructs a mutant library using Darwin assembly to cover all possible mutations in one pot but still keeps the library as compact as possible. This approach allowed us to identify multiple mutants of Escherichia coli lysine decarboxylase, LdcC, with substantial increases in soluble expression. Further investigation led us to pinpoint a single critical residue for the soluble expression of LdcC and unveiled its mechanism for such improvement. Our approach demonstrated that following a protein's natural evolutionary path provides insights to improve protein solubility and/or increase protein expression by a single residue mutation, which can significantly change the profile of protein solubility.

Designing Efficient Enzymes: Eight Predicted Mutations Convert a Hydroxynitrile Lyase into an Efficient Esterase.

Hydroxynitrile lyase from rubber tree (HbHNL) shares 45% identical amino acid residues with the homologous esterase from tobacco, SABP2, but the two enzymes catalyze different reactions. The x-ray structures reveal a serine-histidine-aspartate catalytic triad in both enzymes along with several differing amino acid residues within the active site. Previous exchange of three amino acid residues in the active site of HbHNL with the corresponding amino acid residue in SABP2 (T11G-E79H-K236M) created variant HNL3, which showed low esterase activity toward p-nitrophenyl acetate. Further structure comparison reveals additional differences surrounding the active site. HbHNL contains an improperly positioned oxyanion hole residue and differing solvation of the catalytic aspartate. We hypothesized that correcting these structural differences would impart good esterase activity on the corresponding HbHNL variant. To predict the amino acid substitutions needed to correct the structure, we calculated shortest path maps for both HbHNL and SABP2, which reveal correlated movements of amino acids in the two enzymes. Replacing four amino acid residues (C81L-N104T-V106F-G176S) whose movements are connected to the movements of the catalytic residues yielded variant HNL7TV (stabilizing substitution H103V was also added), which showed an esterase catalytic efficiency comparable to that of SABP2. The x-ray structure of an intermediate variant, HNL6V, showed an altered solvation of the catalytic aspartate and a partially corrected oxyanion hole. This dramatic increase in catalytic efficiency demonstrates the ability of shortest path maps to predict which residues outside the active site contribute to catalytic activity.

Production of 7-O-methyl aromadendrin, a medicinally valuable flavonoid, in Escherichia coli.

7-O-Methyl aromadendrin (7-OMA) is an aglycone moiety of one of the important flavonoid-glycosides found in several plants, such as Populus alba and Eucalyptus maculata, with various medicinal applications. To produce such valuable natural flavonoids in large quantity, an Escherichia coli cell factory has been developed to employ various plant biosynthetic pathways. Here, we report the generation of 7-OMA from its precursor, p-coumaric acid, in E. coli for the first time. Primarily, naringenin (NRN) (flavanone) synthesis was achieved by feeding p-coumaric acid and reconstructing the plant biosynthetic pathway by introducing the following structural genes: 4-coumarate-coenzyme A (CoA) ligase from Petroselinum crispum, chalcone synthase from Petunia hybrida, and chalcone isomerase from Medicago sativa. In order to increase the availability of malonyl-CoA, a critical precursor of 7-OMA, genes for the acyl-CoA carboxylase α and ß subunits (nfa9890 and nfa9940), biotin ligase (nfa9950), and acetyl-CoA synthetase (nfa3550) from Nocardia farcinica were also introduced. Thus, produced NRN was hydroxylated at position 3 by flavanone-3-hydroxylase from Arabidopsis thaliana, which was further methylated at position 7 to produce 7-OMA in the presence of 7-O-methyltransferase from Streptomyces avermitilis. Dihydrokaempferol (DHK) (aromadendrin) and sakuranetin (SKN) were produced as intermediate products. Overexpression of the genes for flavanone biosynthesis and modification pathways, along with malonyl-CoA overproduction in E. coli, produced 2.7 mg/liter (8.9 µM) 7-OMA upon supplementation with 500 µM p-coumaric acid in 24 h, whereas the strain expressing only the flavanone modification enzymes yielded 30 mg/liter (99.2 µM) 7-OMA from 500 µM NRN in 24 h.

Revised molecular basis of the promiscuous carboxylic acid perhydrolase activity in serine hydrolases.

Several serine hydrolases catalyze a promiscuous reaction: perhydrolysis of carboxylic acids to form peroxycarboxylic acids. The working hypothesis is that perhydrolases are more selective than esterases for hydrogen peroxide over water. In this study, we tested this hypothesis, and focused on L29P-PFE (Pseudomonas fluorescens esterase), which catalyzes perhydrolysis of acetic acid 43-fold faster than wild-type PFE. This hypothesis predicts that L29P-PFE should be approximately 43-fold more selective for hydrogen peroxide than wild-type PFE, but experiments show that L29P-PFE is less selective. The ratio of hydrolysis to perhydrolysis of methyl acetate at different concentrations of hydrogen peroxide fit a kinetic model for nucleophile selectivity. L29P-PFE (ß(0)=170 M(-1)) is approximately half as selective for hydrogen peroxide over water than wild-type PFE (ß(0)=330 M(-1)), which contradicts the working hypothesis. An alternative hypothesis is that carboxylic acid perhydrolases increase perhydrolysis by forming the acyl-enzyme intermediate faster. Consistent with this hypothesis, the rate of acetyl-enzyme formation, measured by (18)O-water exchange into acetic acid, was 25-fold faster with L29P-PFE than with wild-type PFE, which is similar to the 43-fold faster perhydrolysis with L29P-PFE. Molecular modeling of the first tetrahedral intermediate (T(d)1) suggests that a closer carbonyl group found in perhydrolases accepts a hydrogen bond from the leaving group water. This revised understanding can help design more efficient enzymes for perhydrolysis and shows how subtle changes can create new, unnatural functions in enzymes.

Enhanced thermal stability of the ß-galactosidase BgaB from Bacillus circulans by cyclization mediated via SpyTag/SpyCatcher interaction and its use in galacto-oligosaccharides synthesis.

Cyclization of proteins using SpyTag/SpyCatcher is a novel approach to increase their thermal stability. In this paper, we test this approach on two ß-galactosidases from Bacillus circulans, BgaB and BgaC, and find that BgaB was stabilized while BgaC was not. Wild-type BgaB precipitated completely upon heating above 70 °C, but after SpyRing cyclization, it remained soluble after heating to 90 °C. Similarly, wild-type BgaB retained only 50 % activity after heating at 60 °C for 10 min, but this increased to 80 % after SpyRing cyclization. In contrast, cyclization decreased the stability of BgaC. After SpyRing cyclization, BgaC only retained 2 % activity after 20-min incubation at 55 °C, whereas the wild-type BgaC retained 25 % activity. One reason for the different effect of cyclization may the shorter distance between the N- and C-termini in BgaB (20.2 Å) as compared to BgaC (43.7 Å). The intrinsic fluorescence and circular dichroism spectra suggested that SpyRing cyclization of BgaB did not significantly change its conformation or secondary structure. SpyRing cyclized BgaB yielded similar amounts and compositions of galacto-oligosaccharides using a high initial lactose concentration (40 %, w/v), but a slightly higher amount at low initial lactose concentration (5 %, w/v) suggesting increased transgalactosylation activity.

Different active-site loop orientation in serine hydrolases versus acyltransferases.

Acyl transfer is a key reaction in biosynthesis, including synthesis of antibiotics and polyesters. Although researchers have long recognized the similar protein fold and catalytic machinery in acyltransferases and hydrolases, the molecular basis for the different reactivity has been a long-standing mystery. By comparison of X-ray structures, we identified a different oxyanion-loop orientation in the active site. In esterases/lipases a carbonyl oxygen points toward the active site, whereas in acyltransferases a NH of the main-chain amide points toward the active site. Amino acid sequence comparisons alone cannot identify such a difference in the main-chain orientation. To identify how this difference might change the reaction mechanism, we solved the X-ray crystal structure of Pseudomonas fluorescens esterase containing a sulfonate transition-state analogue bound to the active-site serine. This structure mimics the transition state for the attack of water on the acyl-enzyme and shows a bridging water molecule between the carbonyl oxygen mentioned above and the sulfonyl oxygen that mimics the attacking water. A possible mechanistic role for this bridging water molecule is to position and activate the attacking water molecule in hydrolases, but to deactivate the attacking water molecule in acyl transferases.

Protein engineering of α/ß-hydrolase fold enzymes.

The superfamily of α/ß-hydrolase fold enzymes is one of the largest known protein families, including a broad range of synthetically useful enzymes such as lipases, esterases, amidases, hydroxynitrile lyases, epoxide hydrolases and dehalogenases. This minireview covers methods developed for efficient protein engineering of these enzymes. Special emphasis is placed on the alteration of enzyme properties such as substrate range, thermostability and enantioselectivity for their application in biocatalysis. In addition, concepts for the investigation of the evolutionary relationship between the different members of this protein superfamily are covered, together with successful examples.

Plasmid hypermutation using a targeted artificial DNA replisome.

Extensive exploration of a protein's sequence space for improved or new molecular functions requires in vivo evolution with large populations. But disentangling the evolution of a target protein from the rest of the proteome is challenging. Here, we designed a protein complex of a targeted artificial DNA replisome (TADR) that operates in live cells to processively replicate one strand of a plasmid with errors. It enhanced mutation rates of the target plasmid up to 2.3 × 105-fold with only a 78-fold increase in off-target mutagenesis. It was used to evolve itself to increase error rate and increase the efficiency of an efflux pump while simultaneously expanding the substrate repertoire. TADR enables multiple simultaneous substitutions to discover functions inaccessible by accumulating single substitutions, affording potential for solving hard problems in molecular evolution and developing biologic drugs and industrial catalysts.