Effect of Nanopore Geometry in the Conformation and Vibrational Dynamics of a Highly Confined Molecular Glass.

The effect of nanoporous confinement on the glass transition temperature (Tg) strongly depends on the type of porous media. Here, we study the molecular origins of this effect in a molecular glass, N,N'-bis(3-methylphenyl)-N,N'-diphenylbenzidine (TPD), highly confined in concave and convex geometries. When confined in controlled pore glass (CPG) with convex pores, TPD's vibrational spectra remained unchanged and two Tg's were observed, consistent with previous studies. In contrast, when confined in silica nanoparticle packings with concave pores, the vibrational peaks were shifted due to more planar conformations and Tg increased, as the pore size was decreased. The strong Tg increases in concave pores indicate significantly slower relaxation dynamics compared to CPG. Given TPD's weak interaction with silica, these effects are entropic in nature and are due to conformational changes at molecular level. The results highlight the role of intramolecular degrees of freedom in the glass transition, which have not been extensively explored.

Stability Assessment of a Polymeric Brominated Flame Retardant in Polystyrene Foams under Application-Relevant Conditions.

The flame retardant (FR) BLUEDGE polymeric flame retardant (PFR) has been in use since 2011 and was developed as a replacement FR for hexabromocyclododecane in polystyrene (PS)-based insulation foams. To better understand the degradation behavior of the PFR used within PS foams, we examined the degradation of PFR under application-relevant conditions. Thermo-oxidative and photolytic pathways represent the most relevant degradation pathways. Separately, both the thermal and oxidative degradations of PFR at ambient conditions were shown to be negligible based on kinetic models of thermogravimetric analysis data obtained at elevated temperatures; the models predict that it would take 100 years to degrade 1% of PFR at 50 °C and 1000 years at 20 °C. Photodegradation was shown to degrade PFR after accelerated ultraviolet (UV) aging/exposure. UV radiation did not significantly penetrate the foam insulation (<2000 µm); the degradation process took place primarily at the surface. The molecular weight of the polymer changed with degradation, but there was minimal loss of bromine from the foam with degradation. The data from the liquid chromatography-mass spectrometry analysis focused primarily on several small-molecule polar products formed, which included two brominated species. These species were predicted using computer-based modeling to be biodegradable, to not be persistent in the environment, and to exhibit a low toxicity to aquatic organisms.

Using deposition rate to increase the thermal and kinetic stability of vapor-deposited hole transport layer glasses via a simple sublimation apparatus.

Deposition rate is known to affect the relative stability of vapor-deposited glasses; slower rates give more stable materials due to enhanced mobility at the free surface of the film. Here we show that the deposition rate can affect both the thermodynamic and kinetic stabilities of N,N'-bis(3-methylphenyl)-N,N'-diphenylbenzidine (TPD) and N,N'-di-[(1-naphthyl)-N,N'-diphenyl]-1,1'-biphenyl)-4,4'-diamine (NPD) glasses used as hole transport layers for organic light emitting diodes (OLEDs). A simple, low-vacuum glass sublimation apparatus and a high vacuum deposition chamber were used to deposit the glass. 50 µm thick films were deposited in the sublimation apparatus and characterized by differential scanning calorimetry while 75 nm thick films were prepared in the high vacuum chamber and studied by hot-stage spectroscopic ellipsometry (SE). The thermodynamic stability from both preparation chambers was consistent and showed that the fictive temperature (Tfictive) was more than 30 K lower than the conventional glass transition temperature (Tg) at the slowest deposition rates. The kinetic stability, measured as the onset temperature (Tonset) where the glass begins to transform into the supercooled liquid, was 16-17 K greater than Tg at the slowest rates. Tonset was systematically lower for the thin films characterized by SE and was attributed to the thickness dependent transformation of the glass into the supercooled liquid. These results show the first calorimetric characterization of the stability of glasses for OLED applications made by vapor deposition and the first direct comparison of deposition apparatuses as a function of the deposition rate. The ease of fabrication will create an opportunity for others to study the effect of deposition conditions on glass stability.

Glasses crystallize rapidly at free surfaces by growing crystals upward.

The crystallization of glasses and amorphous solids is studied in many fields to understand the stability of amorphous materials, the fabrication of glass ceramics, and the mechanism of biomineralization. Recent studies have found that crystal growth in organic glasses can be orders of magnitude faster at the free surface than in the interior, a phenomenon potentially important for understanding glass crystallization in general. Current explanations differ for surface-enhanced crystal growth, including released tension and enhanced mobility at glass surfaces. We report here a feature of the phenomenon relevant for elucidating its mechanism: Despite their higher densities, surface crystals rise substantially above the glass surface as they grow laterally, without penetrating deep into the bulk. For indomethacin (IMC), an organic glass able to grow surface crystals in two polymorphs (α and γ), the growth front can be hundreds of nanometers above the glass surface. The process of surface crystal growth, meanwhile, is unperturbed by eliminating bulk material deeper than some threshold depth (ca. 300 nm for α IMC and less than 180 nm for γ IMC). As a growth strategy, the upward-lateral growth of surface crystals increases the system's surface energy, but can effectively take advantage of surface mobility and circumvent slow growth in the bulk.

Physical vapor deposition as a route to hidden amorphous states.

Stable glasses of indomethacin (IMC) were prepared by using physical vapor deposition. Wide-angle X-ray scattering measurements were performed to characterize the average local structure. IMC glasses prepared at a substrate temperature of 0.84 T(g) (where T(g) is the glass transition temperature) and a deposition rate of 0.2 nm/s show a broad, high-intensity peak at low q values that is not present in the supercooled liquid or melt-quenched glasses. When annealed slightly above T(g), the new WAXS pattern transforms into the melt-quenched glass pattern, but only after very long annealing times. For a series of samples prepared at the lowest deposition rate, the new local packing arrangement is present only for deposition temperatures below T(g) -20 K, suggesting an underlying first-order liquid-to-liquid phase transition.

Experiments and Modeling of Flow-Enhanced Nucleation in LLDPE.

A computational and experimental framework for quantifying flow-enhanced nucleation (FEN) in polymers is presented and demonstrated for an industrial-grade linear low-density polyethylene (LLDPE). Experimentally, kinetic measurements of isothermal crystallization were performed by using fast-scanning calorimetry (FSC) for melts that were presheared at various strain rates. The effect of shear on the average conformation tensor of the melt was modeled with the discrete slip-link model (DSM). The conformation tensor was then related to the acceleration in nucleation kinetics by using an expression previously validated with nonequilibrium molecular dynamics (NEMD). The expression is based on the nematic order tensor of Kuhn segments, which can be obtained from the conformation tensor of entanglement strands. The single adjustable parameter of the model was determined by fitting to the experimental FSC data. This expression accurately describes FEN for the LLDPE, representing a significant advancement toward the development of a fully integrated processing model for crystallizable polymers.

Observation of low heat capacities for vapor-deposited glasses of indomethacin as determined by AC nanocalorimetry.

Highly stable glass films of indomethacin (IMC) with thicknesses ranging from 75 to 2900 nm were prepared by physical vapor deposition. Alternating current (AC) nanocalorimetry was used to evaluate the heat capacity and kinetic stability of the glasses as a function of thickness. Glasses deposited at a substrate temperature of 0.84T(g) displayed heat capacities that were approximately 19 J/(mol K) (4.5%) lower than glasses deposited at T(g) (315 K) or the ordinary glass prepared by cooling the liquid. This difference in heat capacity was observed over the entire thickness range and is significantly larger than the approximately 2 J/(mol K) (0.3%) difference previously observed between aged and ordinary glasses. The vapor-deposited glasses were isothermally transformed into the supercooled liquid above T(g). Glasses with low heat capacities exhibited high kinetic stability. The transformation time increased by an order of magnitude as the film thickness increased from 75 to 600 nm and was independent of film thickness for the thickest films. We interpret these results to indicate that the transformation of stable glass into supercooled liquid can occur by either a surface-initiated or bulk mechanism. In these experiments, the structural relaxation time of the IMC supercooled liquid was observed to be nearly independent of sample thickness.

Calorimetric evidence for two distinct molecular packing arrangements in stable glasses of indomethacin.

Indomethacin glasses of varying stabilities were prepared by physical vapor deposition onto substrates at 265 K. Enthalpy relaxation and the mobility onset temperature were assessed with differential scanning calorimetry (DSC). Quasi-isothermal temperature-modulated DSC was used to measure the reversing heat capacity during annealing above the glass transition temperature Tg. At deposition rates near 8 A/s, scanning DSC shows two enthalpy relaxation peaks and quasi-isothermal DSC shows a two-step change in the reversing heat capacity. We attribute these features to two distinct local packing structures in the vapor-deposited glass, and this interpretation is supported by the strong correlation between the two calorimetric signatures of the glass to liquid transformation. At lower deposition rates, a larger fraction of the sample is prepared in the more stable local packing. The transformation of the vapor-deposited glasses into the supercooled liquid above Tg is exceedingly slow, as much as 4500 times slower than the structural relaxation time of the liquid.

Highly stable indomethacin glasses resist uptake of water vapor.

Mass uptake of water vapor was measured as a function of relative humidity for indomethacin glasses prepared using physical vapor deposition at different substrate temperatures. Highly stable glasses were produced on substrates at 265 K (0.84Tg) by depositing at 0.2 nm/s while samples similar to melt-cooled glasses were produced at 315 K and 5 nm/s. Samples deposited at 315 K absorb approximately the same amount of water as glasses prepared by supercooling the melt while stable glasses absorb a factor of 5 less water. Unexpectedly, the diffusion of water in the stable glass samples is 5-10 times faster than in the glass prepared by cooling the liquid.

Hiking down the energy landscape: progress toward the Kauzmann temperature via vapor deposition.

Physical vapor deposition was employed to prepare amorphous samples of indomethacin and 1,3,5-(tris)naphthylbenzene. By depositing onto substrates held somewhat below the glass transition temperature and varying the deposition rate from 15 to 0.2 nm/s, glasses with low enthalpies and exceptional kinetic stability were prepared. Glasses with fictive temperatures that are as much as 40 K lower than those prepared by cooling the liquid can be made by vapor deposition. As compared to an ordinary glass, the most stable vapor-deposited samples moved about 40% toward the bottom of the potential energy landscape for amorphous materials. These results support the hypothesis that enhanced surface mobility allows stable glass formation by vapor deposition. A comparison of the enthalpy content of vapor-deposited glasses with aged glasses was used to evaluate the difference between bulk and surface dynamics for indomethacin; the dynamics in the top few nanometers of the glass are about 7 orders of magnitude faster than those in the bulk at Tg - 20 K.

Molecular view of the isothermal transformation of a stable glass to a liquid.

We have used neutron reflectivity to measure translational motion on the nanometer length scale in exceptionally stable glasses of tris(naphthylbenzene). These glasses are prepared by vapor deposition onto a substrate held somewhat below the glass transition temperature (T(g) = 342 K). When the most stable samples are annealed at 345 K, no translational motion is observed on the 12 nm length scale for over 10,000 s and full mixing requires more than 60,000 s. For comparison, the equilibrium supercooled liquid mixes in 1000 s at this temperature and on this length scale. These measurements provide insight into the mechanism by which a stable glass transforms into a liquid. "Melting" of the stable glass appears to occur by the growth of liquid regions into the surrounding glassy matrix, perhaps by a surface-initiated growth process. At 345 K, translational motion in the stable glass is at least 100 times slower than motion in the supercooled liquid.

Degradation of Hole Transport Materials via Exciton-Driven Cyclization.

Organic light-emitting diode (OLED) displays have been an active and intense area of research for well over a decade and have now reached commercial success for displays from cell phones to large format televisions. A more thorough understanding of the many different potential degradation modes which cause OLED device failure will be necessary to develop the next generation of OLED materials, improve device lifetime, and to ultimately improve the cost vs performance ratio. Each of the different organic layers in an OLED device can be susceptible to unique decomposition pathways, however stability toward excitons is critical for emissive layer (EML) materials as well as any layer near the recombination zone. This study will specifically focus on degradation modes within the hole transport layer (HTL) with the goal being to identify the general decomposition paths occurring in an operating device and use this information to design new derivatives which can block these pathways. Through post-mortem analyses of several aged OLED devices, an apparently common intramolecular cyclization pathway has been identified that was not previously reported for arylamine-containing HTL materials and that operates parallel to but faster than the previously described fragmentation pathways.

Influence of substrate temperature on the stability of glasses prepared by vapor deposition.

Physical vapor deposition of indomethacin (IMC) was used to prepare glasses with unusual thermodynamic and kinetic stability. By varying the substrate temperature during the deposition from 190 K to the glass transition temperature (Tg=315 K), it was determined that depositions near 0.85Tg (265 K) resulted in the most stable IMC glasses regardless of substrate. Differential scanning calorimetry of samples deposited at 265 K indicated that the enthalpy was 8 J/g less than the ordinary glass prepared by cooling the liquid, corresponding to a 20 K reduction in the fictive temperature. Deposition at 265 K also resulted in the greatest kinetic stability, as indicated by the highest onset temperature. The most stable vapor-deposited IMC glasses had thermodynamic stabilities equivalent to ordinary glasses aged at 295 K for 7 months. We attribute the creation of stable IMC glasses via vapor deposition to enhanced surface mobility. At substrate temperatures near 0.6Tg, this mobility is diminished or absent, resulting in low stability, vapor-deposited glasses.

Organic glasses with exceptional thermodynamic and kinetic stability.

Vapor deposition has been used to create glassy materials with extraordinary thermodynamic and kinetic stability and high density. For glasses prepared from indomethacin or 1,3-bis-(1-naphthyl)-5-(2-naphthyl)benzene, stability is optimized when deposition occurs on substrates at a temperature of 50 K below the conventional glass transition temperature. We attribute the substantial improvement in thermodynamic and kinetic properties to enhanced mobility within a few nanometers of the glass surface during deposition. This technique provides an efficient means of producing glassy materials that are low on the energy landscape and could affect technologies such as amorphous pharmaceuticals.

Isothermal desorption measurements of self-diffusion in supercooled o-terphenyl.

Isothermal desorption of o-terphenyl thin-film bilayers was used to measure self-diffusion coefficients of supercooled o-terphenyl near the glass transition temperature (Tg=243 K). Diffusion coefficients from 10(-15.5) to 10(-12) cm2 s(-1) were obtained between 246 and 265 K. Protio and deuterio o-terphenyl were sequentially vapor deposited, then annealed to simultaneously diffuse and desorb the sample in a vacuum chamber. During the desorption of the bilayer, the concentration of each isotope was detected by a mass spectrometer, which revealed the extent of interfacial broadening. In these experiments, isotopic interdiffusion is indistinguishable from self-diffusion and the measured interfacial broadening is consistent with Fickian diffusion. The samples prepared under several different deposition conditions yielded the same self-diffusion coefficients, indicating that the experiments were conducted in the equilibrium supercooled liquid state.