USA millennial and non-millennial beef consumers perception of beef, pork, and chicken.

Millennials have been shown to have distinctly different behaviors; however, factors affecting their liking of beef, pork and chicken has not been fully elucidated. As millennials are current and future animal protein consumers, the question of if they have different drivers of liking for beef, pork, and chicken has not been answered. Top loin steaks cooked to 58.3 or 80 °C; and pork loin chops and chicken breasts cooked to 62.7 or 80 °C were cooked on a flat grill. Beef bottom round roasts cooked to 58.3 or 80°; and pork inside ham roasts and chicken thighs were cooked to 62.7 or 80 °C in a Crock-pot®. A descriptive flavor and texture attribute panel and a consumer central location test in four cities were used to evaluated flavor and texture attributes. Consumers were either millennials or non-millennials, and light or heavy beef-eaters. Meat descriptive flavor and texture attributes differed by cooking method, cut, and internal temperature (P < 0.05). Consumers preferred grilled meat more than meat cooked in the Crock-pot® (P > 0.05). Consumers rated grill flavor, juiciness, and tenderness (P ≥ 0.05) higher in grilled meat. Light beef-eaters, those who ate beef 2 to 4 times per month, rated overall, flavor, and species flavor lower (P < 0.05) than heavy beef-eaters, but consumers liked beef regardless of generational segment or their consumption of beef; however, millennials rated overall, overall flavor, and tenderness liking slightly lower than non-millennials. These results indicate that millennials have similar drivers of liking as non-millennials across beef, pork, and chicken protein sources.

Carcass, sensory, fat color, and consumer acceptance characteristics of Angus-cross steers finished on ryegrass (Lolium multiflorum) forage or on a high-concentrate diet.

Fall-born Angus-cross steers (n=30) from 1 of 2 sires, were randomly assigned to either an 85% corn, 7.5% cotton-seed hulls, and 7.5% vitamin/mineral/urea supplement diet (GRAIN), 100% ryegrass grazing (RG), or ryegrass grazing then the GRAIN diet for 94d (RG/GRAIN). USDA Yield Grade of steers finished on either the GRAIN or RG/GRAIN regimens were higher (P<0.02) compared to those finished on RG. Marbling score and USDA Quality Grade did not differ (P=0.21 and 0.12, respectively) among the three finishing regimens. Yellowness (b(∗)) values of the subcutaneous fat from both strip loins (SL) and ribeye (RE) rolls was lowest (P<0.05) in cuts taken from steers finished on GRAIN. Subcutaneous fat of both SL and RE had lower L(∗) and hue angle values, and higher a(∗) and b(∗) values before trimming than after the fat was trimmed to 0.3cm. Initial and sustained tenderness scores of SL from steers finished on GRAIN were higher when compared to RG/GRAIN or RG regimens (P<0.05). Flavor intensity and beef flavor scores were higher (P<0.05) for SL from GRAIN- or RG/GRAIN-finished steers compared to RG-finished steers. GRAIN SL had lower (P<0.05) WBSF values than RG, but similar (P>0.05) to RG/GRAIN. Trained sensory tenderness and flavor scores and WBSF values for RE were not affected by finishing regimen (P>0.05). GRAIN steaks had a higher consumer overall acceptability score, average price/kg, and rank (P<0.05). While carcass, fat, and sensory disadvantages were present in RG cattle, the overall magnitude of the differences compared to GRAIN cattle was fairly small.

National Beef Quality Audit-2016: Phase 1, Face-to-face interviews.

The National Beef Quality Audit (NBQA) is conducted every 5 yr and was most recently again conducted in 2016. Face-to-face interviews gauged progress in quality associated with live cattle production using procedures first utilized in NBQA 2011. The 2016 NBQA was the first in which interviews concerning fed steers and heifers were combined with an audit of market cow and bull beef. Face-to-face interviews were designed to illicit definitions for beef quality, estimate willingness to pay (WTP) for quality attributes, establish relative importance rankings for important quality factors, and assess images, strengths, weaknesses, potential threats, and shifting trends in the beef industry since the 2011 audit. Individuals making purchasing decisions in 5 market sectors of the steer/heifer and cow/bull beef supply chain were interviewed, including packers (n = 36), retailers (including large and small supermarket companies and warehouse food sales companies; n = 35), food service operators (including quick-serve, full-service, and institutional establishments; n = 29), further processors (n = 64), and peripherally-related government and trade organizations (GTO; n = 30). Face-to-face interviews were conducted between January and November of 2016 using a designed dynamic routing system. Definitions (as described by interviewees) for 7 pre-determined quality factors, including: (1) How and where the cattle were raised, (2) Lean, fat, and bone, (3) Weight and size, (4) Visual characteristics, (5) Food safety, (6) Eating satisfaction, and (7) Cattle genetics were recorded verbatim and categorized into similar responses for analysis. Compared to NBQA-2011, a higher percentage of companies were willing to pay premiums for guaranteed quality attributes, but overall were willing to pay lower average premiums than the companies interviewed in 2011. Food safety had the highest share of preference among all interviewees, generating a double-digit advantage over any other quality factor. The 2 beef industries have an overall positive image among interviewees, and despite lingering weaknesses, product quality continued to be at the forefront of the strengths category for both steer and heifer beef and market cow and bull beef.

National Beef Quality Audit-2016: Transportation, mobility, and harvest-floor assessments of targeted characteristics that affect quality and value of cattle, carcasses, and by-products.

The National Beef Quality Audit-2016 (NBQA-2016) was conducted to assess current transportation, mobility, and quality characteristics of U.S. fed steers and heifers. Data were collected at 17 beef processing facilities between March and November 2016. About 8,000 live cattle were evaluated for transportation and mobility, and about 25,000 carcasses were evaluated on the slaughter floor. Cattle were in transit to the slaughter facility for a mean duration of 2.7 h from a mean distance of 218.5 km using trailers with dimensions ranging from 17.84 m2 to 59.09 m2. Area allotted per animal averaged 1.13 m2 and ranged from 0.85 m2 to 2.28 m2. A total of 96.8% of cattle received a mobility score of 1 (walks easily, no apparent lameness). Identification types (35.1% had multiple) were lot visual tags (61.5%), individual tags (55.0%), electronic tags (16.9%), metal-clip tags (9.2%), bar-coded tags (0.05%), wattles (0.01%), and other (2.6%). Cattle were black-hided (57.8%), Holstein (20.4%), red-hided (10.5%), yellow-hided (4.8%), gray-hided (2.9%), brown-hided (1.3%), and white-hided (1.1%). Unbranded hides were observed on 74.3% of cattle; 18.6% had brands located on the butt, 6.3% on the side, and 1.3% on the shoulder (values exceed 100% due to multiple brands). For hide-on carcasses, 37.7% displayed no mud or manure; specific locations for mud or manure were legs (40.8%), belly (33.0%), tail region (15.5%), side (6.8%), and top-line (3.9%). Cattle without horns represented 83.3% of the sample, and cattle that did have horns measured: < 2.54 cm (5.5%), 2.54 to 12.7 cm (8.3%), and > 12.7 cm (2.9%). Carcasses without bruises represented 61.1% of those sampled, whereas 28.2% had 1, 8.2% had 2, 2.1% had 3, and 0.3% had 4 bruises. Of those carcasses with a bruise, the bruise was located on the loin (29.7%), round (27.8%), chuck (16.4%), rib (14.4%), and brisket/plate/flank (11.6%). Frequencies of offal condemnations were livers (30.8%), lungs (18.2%), viscera (16.3%), hearts (11.1%), heads (2.7%), and tongues (2.0%). Compared to NBQA-2011, fewer cattle were identified for traceability, fewer were black-hided, a greater number were Holstein cattle, more with no brand and no horns, fewer without bruises, more liver, lung, and viscera condemnations, and fewer heads and tongues were condemned. The NBQA remains an influential survey for the U.S. beef industry to provide benchmarks and strategic plans for continued improvement of beef quality and consistency.

National Beef Quality Audit-2016: Transportation, mobility, live cattle, and carcass assessments of targeted producer-related characteristics that affect value of market cows and bulls, their carcasses, and associated by-products.

The National Beef Quality Audit-2016 marks the fourth iteration in a series assessing the quality of live beef and dairy cows and bulls and their carcass counterparts. The objective was to determine the incidence of producer-related defects, and report cattle and carcass traits associated with producer management. Conducted from March through December of 2016, trailers (n = 154), live animals (n = 5,470), hide-on carcasses (n = 5,278), and hide-off hot carcasses (n = 5,510) were surveyed in 18 commercial packing facilities throughout the United States. Cattle were allowed 2.3 m2 of trailer space on average during transit indicating some haulers are adhering to industry handling guidelines for trailer space requirements. Of the mixed gender loads arriving at processing facilities, cows and bulls were not segregated on 64.4% of the trailers surveyed. When assessed for mobility, the greatest majority of cattle surveyed were sound. Since the inception of the quality audit series, beef cows have shown substantial improvements in muscle. Today over 90.0% of dairy cows are too light muscled. The mean body condition score for beef animals was 4.7 and for dairy cows and bulls was 2.6 and 3.3, respectively. Dairy cattle were lighter muscled, yet fatter than the dairy cattle surveyed in 2007. Of cattle surveyed, most did not have horns, nor any visible live animal defects. Unbranded hides were observed on 77.3% of cattle. Carcass bruising was seen on 64.1% of cow carcasses and 42.9% of bull carcasses. However, over half of all bruises were identified to only be minor in severity. Nearly all cattle (98.4%) were free of visible injection-site lesions. Current results suggest improvements have been made in cattle and meat quality in the cow and bull sector. Furthermore, the results provide guidance for continued educational and research efforts for improving market cow and bull beef quality.

National Beef Quality Audit - 2016: Survey of carcass characteristics through instrument grading assessments.

The instrument grading assessment portion of the National Beef Quality Audit (NBQA) - 2016 allows the unique opportunity to evaluate beef carcass traits over the course of a year. One week of instrument grading data was collected each month from 5 beef processing corporations encompassing 18 facilities from January 2016 through December 2016 ( = 4,544,635 carcasses). Mean USDA yield grade (YG) was 3.1 with 1.37 cm fat thickness (FT), 88.9 cm LM area, 393.6 kg HCW, and 2.1% KPH. Frequency distribution of USDA YG was 9.5% YG 1, 34.6% YG 2, 38.8% YG 3, 14.6% YG 4, and 2.5% YG 5. Increases in HCW and FT since the NBQA-2011 were major contributors to differences in mean YG and the (numerically) increased frequency of YG 3, 4, and 5 carcasses found in the current audit. Mean marbling score was Small, and the distribution of USDA quality grades was 4.2% Prime, 71.4% Choice, 21.7% Select, and 2.7% other. Frequency of carcasses grading Prime on Monday (6.43%) was numerically higher than the average frequency of carcasses grading Prime overall (4.2%). Monthly HCW means were 397.6 kg in January, 397.2 kg in February, 396.5 kg in March, 389.3 kg in April, 384.8 kg in May, 385.0 kg in June, 386.1 kg in July, 394.1 kg in August, 399.1 kg in September, 403.9 kg in October, 406.5 kg in November, and 401.9 kg in December. Monthly mean marbling scores were Small in January, Small in February, Small in March, Small in April, Small in May, Small in June, Small in July, Small in August, Small in September, Small in October, Small in November, and Small in December. Both mean HCW and mean marbling score declined in the months of May and June. The month with the greatest numerical frequency of dark cutters was October (0.74%). Comparison of overall data from in-plant carcass and instrument grading assessments revealed close alignment of information, especially for YG (3.1 for in-plant assessment versus 3.1 for instrument grading) and marbling (Small for in-plant assessment versus Small for instrument grading). These findings allow the beef industry access to the greatest volume of beef value-determining characteristics for the U.S. fed steer and heifer population than ever reported, resulting in potentially more precise targeting of future quality and consistency efforts.

National Beef Quality Audit-2016: In-plant survey of carcass characteristics related to quality, quantity, and value of fed steers and heifers.

The National Beef Quality Audit (NBQA)-2016 used in-plant cooler assessments to benchmark the current status of the fed steer and heifer beef industry in the United States. In-plant cooler assessments ( = 9,106 carcasses) were conducted at 30 facilities, where approximately 10% of a single day's production were evaluated for USDA quality grade (QG) and yield grade (YG) factors. Frequencies of evaluated traits were 66.5% steer and 33.4% heifer sex classes and 82.9% native, 15.9% dairy-type, and 1.2% estimated breed types. Mean USDA YG factors were 1.42 cm for adjusted fat thickness, 89.5 cm for LM area, 390.3 kg for HCW, and 1.9% for KPH. Mean USDA YG was 3.1, with a frequency distribution of 9.6% YG 1, 36.7% YG 2, 39.2% YG 3, 12.0% YG 4, and 2.5% YG 5. Mean USDA QG traits were Small for marbling score, A for overall maturity, A55 for lean maturity, and A for skeletal maturity. Mean USDA QG was Select with a frequency distribution of QG of 3.8% Prime, 67.3% Choice, 23.2% Select, and 5.6% lower score. Lower score included dark cutter (1.9%), blood splash (0.1%), and hard bone, which are USDA overall maturity scores of C or older (1.8%). Marbling score distributions were 0.85% Slightly Abundant or greater, 7.63% Moderate, 23.54% Modest, 39.63% Small, 23.62% Slight, and 0.83% Traces or less. Carcasses that were Choice or Select and USDA YG 2 or 3 accounted for 70.7% of the carcasses evaluated. Compared with the previous NBQA, we found a numerical increase in mean USDA YG, USDA QG, adjusted fat thickness, HCW, LM area, and marbling score with an increase in dairy-type carcasses and percentage of carcasses grading USDA Prime and Choice as well as frequency of USDA YG 4 and 5. The findings from this study will be used by all segments of the industry to understand and improve the quality of fed steer and heifer beef that is being produced.

Improved sensitivity for determining thiobarbituric acid reactive substances in ground beef.

To create expected differences in oxidation ground beef samples from grass-fed and grain-fed animals were utilized in six differing percentages with 4 different packaging types. Percentages of grass-fed and grain-fed ground beef (GB) consisted of 100% grain fed GB; 80% grain-fed: 20% grass-fed GB; 60% grain-fed: 40% grass-fed GB; 40% grain-fed: 60% grass-fed GB; 20% grain-fed: 80% grass-fed GB; and 100% grass-fed GB. Packaging treatments included: high oxygen (HO; 80% O2: 20% CO2), low oxygen (LO; 65% N2: 35% CO2), carbon monoxide (CO; 65% N2: 34.6% CO2: 0.4% CO), and overwrap (OV; polyvinyl chloride film wrapped over a styrofoam tray). The modified TBARS method showed greater sensitivity and increased differences between treatments with less variability. The original extraction method showed fewer differences between treatments with greater variability. Data suggest that the modified method of TBARS determination could provide researchers with a better assay to find differences while decreasing the amount of labor.

Improvement of beef tenderness and quality traits with calcium chloride injection in beef loins 48 hours postmortem.

Boneless strip loin subprimals (n = 24) were fabricated from 12 USDA Standard yield grade 2 carcasses at a commercial beef processing facility and processed 48 h postmortem to determine the effect of injection of 200 or 250 mM calcium chloride (CaCl2) solution at 5% (wt/wt) on beef quality traits. One-third of the subprimal served as the control; the remaining portion was injected with either 200 or 250 mM CaCl2 at 5% (wt/wt). The CaCl2 concentration treatment was randomly assigned to strip loins fabricated from either the right or left side of the carcass. After 7 or 14 d of postmortem storage at 2 degrees C, 2.5-cm-thick steaks were cut from each control and treated portion of the subprimals and evaluated for Warner-Bratzler shear (WBS) force, retail display characteristics, Minolta colorimeter L*, a*, and b* values, and trained sensory panel ratings. Treatment of the muscle with 250 mM CaCl2 increased (P < .05) trained sensory panel tenderness and beef flavor scores, and both CaCl2 concentrations decreased WBS force values, when compared with the control. Scores for color, uniformity, and browning in the retail display case did not differ (P > .05) for the 200-mM treatment compared with the control. Scores for discoloration in the retail display decreased (P < .05) for all three-way interactions of CaCl2 concentration, aging time, and display time after d 2 (except 7-d control, which remained the same [P > .05] d 1 through 5). The L* values did not differ (P < .05) for interactions of CaCl2 concentration, x aging time, and retail display.(ABSTRACT TRUNCATED AT 250 WORDS)

Improving pork quality by feeding supranutritional concentrations of vitamin D3.

Duroc-cross pigs (n = 25) were assigned to one of three experimental finishing diets containing 0 (control), 40,000 (40), or 80,000 (80) IU of supplemental vitamin D3/kg of feed (as-fed basis)to test the effects of vitamin D3 on pork quality traits. Experimental diets were fed for 44 or 51 d before slaughter, and days on feed were blocked in the experimental design. A trend existed for pigs receiving the highest concentration of vitamin D3 supplementation to have a lower (P = 0.08) ADG (0.77 kg/d) compared with pigs fed either the 40-diet (0.88 kg/d) or control (0.92 kg/d). Diet did not (P > 0.10) affect backfat thickness measured along the midline, 10th-rib fat depth, longissimus muscle area, muscle score, or hot carcass weights. Longissimus pH, measured at 0.5, 1, 2, 3, 4, and 24 h postmortem, was higher (P < 0.05) for pigs on the 80-diet than those fed the control diet. Longissimus muscle color, measured at 24 h postmortem, from pigs fed either the 40- or 80-diet were darker (lower L* values; P < 0.05) than those fed the control diet. Objective longissimus color scores were higher (P < 0.01), and firmness/wetness scores lower (P < 0.05), for pigs on the 80-diet as compared to those on the 40-diet or control diet. The diet had no (P > 0.10) effect on Warner-Bratzler shear force values; percentage of cook loss; or trained sensory panel evaluations for tenderness, juiciness, and flavor. Feeding the 80-diet increased (P < 0.05) plasma vitamin D3 and calcium after 2, 4, and 6 wk on feed compared with the control diet. Vitamin D3 and 25-hydroxy vitamin D3 concentrations in the longissimus muscle increased (P = 0.001) with increasing vitamin D3 levels in the diet; however, muscle calcium concentrations and fiber type were not (P > 0.30) affected by diet. These results indicate that feeding supranutritional levels of vitamin D3 for at least 44 d improves pork color and increases pH, but may retard growth if fed at 80,000 IU/kg of feed.

Characterization and consumer acceptance of three muscles from Hampshire x Rambouillet cross sheep expressing the callipyge phenotype.

Eight Hampshire x Rambouillet crossbred wethers expressing the callipyge phenotype and eight Hampshire x Rambouillet half-sibling wethers with a normal phenotype were slaughtered when they reached 59 kg. The supraspinatus (SPM), longissimus (LM), and semitendinosus (STM) muscles were analyzed to determine callipyge effects on calpain and calpastatin activities, sarcomere length, percentage of muscle fiber types, and muscle fiber areas. After 14 d of aging, chops were frozen until analyses for trained sensory panel evaluations, Warner-Bratzler shear force values, and consumer perceptions of tenderness, flavor, juiciness, and overall satisfaction of chops were conducted. Calpastatin activity was 57% greater (P < 0.05) and m-calpain activity was 33% greater (P < 0.05) in muscles from carcasses of callipyge than normal sheep. Sarcomeres were shorter (P < 0.001) in the LM than the SPM or STM, regardless of phenotype. Muscle fiber area was 76% larger (P < 0.05) in the LM of callipyge than normal sheep, but muscle fiber area was not affected (P > 0.05) by phenotype in the SPM or STM. Phenotype had no effect (P = 0.12) on the percentage of slow-twitch, oxidative fiber types in any of the three muscles. In STM and LM from callipyge lambs, the percentage of fast-twitch, oxidative/glycolytic fibers was lower (P < 0.05) and that of fast-twitch-glycolytic fibers was higher (P < 0.05) than in their normal counterparts. Phenotype did not affect (P = 0.90) the fiber type percentage in the SPM. Callipyge LM were less tender and normal LM were more tender than other chops (P < 0.05). Callipyge loin chops had higher Warner-Bratzler shear force values than other chops (P < 0.001). Consumers rated fewer (P < 0.05) callipyge loin and shoulder chops acceptable in juiciness, tenderness, and overall acceptability than normal chops, but phenotype did not affect (P > 0.05) consumer acceptability of leg chops. These results indicate that LM from Hampshire x Rambouillet sheep displaying the callipyge phenotype had higher calpastatin activity and were less tender than the LM from normal sheep. In addition, consumer perceptions indicated that only one in 10 leg chops, one in five shoulder chops, and one in four loin chops from callipyge sheep were unacceptable.

Accuracy of application of USDA beef quality and yield grades using the traditional system and the proposed seven-grade yield grade system.

Beef carcasses (n = 5,542) were evaluated by three USDA on-line graders and compared with the computed expert USDA quality (QG) and yield grades (YG) during 8-h shifts at a major beef-processing facility for a 2-wk period to evaluate the accuracy of applying USDA QG and YG within the traditional five-grade and the proposed seven-grade (segregating YG 2 and 3 into YG 2A, 2B, 3A, and 3B) YG systems. Quality grade distribution of the carcasses was 1.1% Prime, 50.0% Choice, 43.8% Select, and 5.1% No-Roll. Accuracy of applying QG was not affected (P>.05) by changing from the five-grade (91.5%) to either the seven-grade system, when determining only QG (94.3%), or the seven-grade system, when determining QG and YG (95.0%). Calculated expert YG successfully segregated carcasses into their respective YG, but on-line graders could not differentiate between YG 4 and 5 in the seven-grade systems. The application of YG in the five-grade system was more accurate (P<.05) than either of the seven-grade systems. A trend existed for on-line graders to undergrade carcasses as the numerical YG increased. Total accuracy of applying YG decreased by 19.4 to 21.8% when switching from the five-grade to the seven-grade system. The segmentation of USDA YG 2 and 3 into YG 2A, 2B, 3A, and 3B resulted in a decrease in the ability of on-line graders to accurately apply the YG.

Shear gradient in longissimus steaks.

Boneless top loin subprimals (n = 320) from Slight and Small marbled carcasses were fabricated into 2.54-cm thick steaks to determine core location effects on tenderness. In Exp. 1, top loins were aged to 7 d before steaks were cut and cooked to an internal temperature of 71 degrees C. After cooking, a maximum of 15 1.27-cm diameter cores were removed and sheared with a Warner-Bratzler shear force (WBSF) device. There was not a marbling score x core location interaction (P = 0.36). However, there was a main effect of core location (P < 0.01). Cores from the medial, middle, and lateral portion of the longissimus muscle (LM) aged for 7 d differed, with less resistance (P < 0.05) in the medial than the lateral end. Also, there was an effect of marbling score on WBSF, with Small-marbled steaks having lower (P < 0.02) WBSF values than Slight-marbled steaks. In a second experiment, steaks were removed from the middle of the top loin subprimals and aged an additional 7 d to produce 14-d aged steaks. Shear values decreased (P < 0.05) from Exp. 1 to 2 for all core locations. Neither the main effect of marbling score nor the core location x marbling score interaction was significant (P > 0.40); however, the same lateral to medial gradient in WBSF values was discovered again in Exp. 2. Both experiments indicated there were regions of WBSF values that differed (P < 0.05) across the cross section of the LM producing a shear-force/tenderness gradient, with the most medial cores having the lowest WBSF values in both experiments independent of marbling score. Regression analyses indicated the middle and center portions of LM steaks tended to have the most predictive capacity of average WBSF. Because of the variability in tenderness caused by location within the LM, care should be exercised when selecting sampling areas for the measurements of tenderness using the WBSF measure.

Protein turnover and sensory traits of longissimus muscle from implanted and nonimplanted heifers.

Primary bovine muscle cell culture studies were conducted to determine whether implanting heifers had a direct effect on in vitro protein synthesis and degradation and to determine the effect of implanting heifers on longissimus muscle palatability. Feedlot heifers (n = 96) were administered one of six implant regimens to characterize their effect on in vitro amino acid uptake and protein degradation. Treatments consisted of: 1) a nonimplanted control (NI/NI); 2) no implant on d 1 and Revalor-H administered on d 84 of the experiment (NI/Rev); 3) Revalor-H on d 1, but no implant given at d 84 (Rev/NI); 4) Revalor-H administered on d 1 and d 84 (Rev/Rev); 5) Revalor-IH administered on d 1 and Revalor-H at d 84 (RIH/Rev); and 6) Synovex-H given at d 1 and Revalor-H administered at d 84 (Syn/Rev). Blood and longissimus lumborum muscle were collected 20 min postmortem, and serum and muscle extracts were incubated with primary bovine muscle cells. Implant treatments had minimal effects on shear force and sensory traits; however, steaks from Rev/Rev heifers were 0.31 kg more tender (P < 0.05) than steaks from NI/NI heifers. Serum protein synthesis and degradation were not affected (P > 0.10) by any implant treatment. When primary bovine muscle cells were treated with muscle extract, amino acid uptake was greater for heifers implanted with Rev/ Rev than for the average of all other treatments (P < 0.01). The Rev/Rev implant regimen also increased (P < 0.05) amino acid uptake compared with heifers treated with RIH/Rev, Syn/Rev, NI/NI, NI/Rev, or Rev/NI. Cellular protein degradation of the muscle cell culture treated with muscle extract tended (P < 0.10) to be higher in NI/NI-treated cells compared with the average of all implant treatments. In addition, cells treated with muscle extract from heifers implanted with Rev/Rev had lower (P < 0.05) protein degradation than the NI/NI control heifers. These results indicate that anabolic implant strategies can directly affect both muscle protein synthesis and degradation via effects that seem to be more autocrine than paracrine in nature.

Electrical stimulation effects on tenderness of five muscles from Hampshire x Rambouillet crossbred lambs with the callipyge phenotype.

The objective of this study was to determine effects of electrical stimulation (ES) on muscle quality and sensory traits of 12 Hampshire x Rambouillet callipyge lambs. One side of each carcass was randomly assigned to an ES treatment of 550 V and 60 Hz of electricity for 2 s on and 2 s off 15 times. The other side was a nonstimulated control (NES). Heated calpastatin, sarcomere length, myofibrillar fragmentation index (MFI), Warner-Bratzler shear (WBS), and trained sensory panel values were measured on the semitendinosus (ST), semimembranosus (SM), longissimus (ML), supraspinatus (SP), and triceps brachii (TB) muscles. Electrically stimulating the carcass sides induced a more rapid (P = .001) pH decline in the longissimus muscle, and ES sides had a brighter (P = .001) red color of loineye than nonstimulated sides. At d 14 of storage (2 degrees C), the TB had the highest (P < .05) MFI value, indicating more protein degradation, and the ST and ML muscles had the lowest MFI (P = .008). Regardless of ES treatment, SM and ML had the highest (P < .05) WBS values. The ST muscle had higher (P < .05) WBS values than the SP but did not differ (P > .05) from the TB muscle. Electrical stimulation had no effect on WBS or any trained sensory panel values (P > .05). The percentage of loin chops rated slightly tender or better was improved 30 to 34% by electrical stimulation (P < .05). The ML muscle was scored lower (P < .05) in sustained juiciness compared with the SM, SP, and TB but did not differ (P > .05) from the ST muscle. The SM and ML muscles were rated lower (P < .05) in initial and sustained tenderness scores than other muscles. Tenderness scores were higher (P < .05) for the TB than for the SP but did not differ (P > .05) from the ST muscle. Electrically stimulating callipyge carcasses improves the tenderness of loin chops by increasing the percentage of chops rated from slightly tough to slightly tender.

Effects of growth implants on consumer perceptions of meat tenderness in beef steers.

Anabolic steroid implants are routinely used to increase growth performance and profitability; however, there are concerns that the use of implants, particularly those containing trenbolone acetate, may have detrimental effects on carcass quality and beef tenderness. Thus, the objectives of the current study were to determine the effects of various commonly used implant regimens on shear force values, sensory properties, and consumer satisfaction of beef top loin steaks from cattle of Bos indicus influence. Cattle were supplied by producers that agreed to provide sire and dam information in exchange for carcass and sensory data. Steers (n = 2,748) were assigned randomly to one of three implant treatments (12/sire; four steers from each sire were placed into each treatment group): 1) unimplanted controls (n = 1,368); 2) Synovex-S followed by another Synovex-S (n = 660); or 3) Synovex-S followed by Revalor-S (n = 720). Steaks sampled after 3, 7, and 14 d of aging indicated that unimplanted cattle had lower (P < 0.05) Warner-Bratzler Shear force values than those from implanted animals. No differences (P > 0.05) in shear force values were found between the two treatments or the control groups for steaks sampled following a 21-d aging period. Steaks from implanted animals sampled after 3, 7, and 14 d aging were rated lower (P < 0.05) for initial and sustained trained sensory panel tenderness scores. Consumers failed to detect any differences in steak samples related to implant treatment after 7 and 14 d of aging. Consumer education level and family income did not affect overall acceptability (P > 0.10 and 0.18, respectively) or tenderness acceptability (P > 0.11 and 0.68, respectively); however, consumers with postgraduate degrees recorded lower (P < 0.05) overall quality, beef flavor, juiciness, and tenderness scores than consumers in all other education classifications. Additionally, family income had no effect on overall quality (P > 0.21), beef flavor (P > 0.28), juiciness (P > 0.58), or tenderness (P > 0.45) scores. Results indicate that using a moderate implant program in Bos indicus-influenced cattle has no detrimental effects on beef tenderness and consumer acceptability.

Vitamin-mineral supplementation and accelerated chilling effects on quality of pork from pigs that are monomutant or noncarriers of the halothane gene.

We examined the effects of vitamin and mineral supplementation of the finishing diet on growth and accelerated chilling of carcasses on carcass and muscle traits of halothane gene carrier and noncarrier pigs. Barrows and gilts that were either monomutants (MON, n = 49) or noncarriers (NON, n = 28) of the halothane gene were fed a standard finishing diet until they reached 86 kg. They then were randomly assigned to one of four finishing diets formulated to contain 11 IU/kg vitamin E (0), 311 IU/kg vitamin E plus additional vitamins and minerals (300), 611 IU/kg vitamin E plus additional vitamins and minerals (600), or 911 IU/kg vitamin E plus additional vitamins and minerals (900) until they were slaughtered (118 kg). Alternating carcass sides were assigned either a normal chilling procedure (NC, 4 degrees C for 24 h) or an accelerated chilling procedure (AC, -20 degrees C for 1.5 h and then 4 degrees C for 22.5 h). Supplementing vitamin E in the finishing diet increased (P < 0.05) the concentration of vitamin E in the longissimus muscle. Supplementing vitamin E in the diets of MON pigs did not affect color, firmness, or cooking losses of loins or color and firmness of hams. For the NON genotype, increasing the level of vitamin E in the diet decreased (P < 0.05) the percentage of PSE loins and hams. Color and firmness scores of the gluteus medius and longissimus muscles were improved 0.4 unit (P < 0.005) by AC compared with NC of carcasses. Loin chop juiciness and flavor were improved (P < 0.05) in the MON genotype for AC compared to NC. Accelerated chilling reduced (P < 0.05) the percentage of PSE loins from 38 to 17% and PSE hams from 32 to 10% for the MON genotype, but percentage of PSE was not affected (P > 0.05) by chilling treatment for the NON genotype. No interaction between diet and chill treatments existed for muscle quality traits (P > 0.05). Supplementing finishing diets of NON pigs with at least 600 IU/kg vitamin E, in addition to other vitamins and minerals, or accelerated chilling of MON carcasses can reduce the incidence of PSE pork.

Degree of amino acid restrictions during the grower phase and compensatory growth in pigs selected for lean growth efficiency.

A total of 32 select line (SL) and 32 control line (CL) Duroc pigs were used in two trials to determine the effect of dietary amino acid contents during the grower (G) phase and selection for lean growth efficiency on growth performance, carcass traits, and meat quality. In each trial, pigs weighing 20 kg were assigned to 16 pens with two gilts or two castrated males per pen, and pens were randomly assigned within the genetic line to corn-soybean meal G diets formulated to contain 5.0, 7.0, 9.0, or 11.0 g lysine/kg. After 50 kg, all pigs were fed common finisher 1 (F1) and finisher 2 (F2) diets. Pigs were allowed ad libitum access to feed and water. After the initial statistical analyses, the data sets from the two trials were combined. During the G phase, pigs consumed less feed [linear (Ln), P < 0.001] and more lysine (Ln, P < 0.001), grew faster (Ln, P < 0.05) but utilized feed more and lysine less efficiently (Ln, P < 0.001) for weight gain as the amino acid content of G diets increased. Increasing dietary amino acids resulted in less ultrasound backfat (Ln, P < 0.001) and more serum urea nitrogen [Ln, P < 0.001; quadratic (Qd), P < 0.01] at the end of the G phase. Pigs grew more slowly during the F1 (Ln, P < 0.01 and Qd, P = 0.05) and F2 (Ln, P = 0.07) phases and utilized feed and lysine less efficiently (Ln, P < 0.05) for weight gain during the F1 phase as the amino acid content of G diets increased. The grower diet had no effect on overall weight gain and feed efficiency, carcass traits, or meat quality scores. The efficiency of lysine utilization for overall weight gain (Ln, P < 0.001) and lean accretion (Ln, P < 0.05) improved as the amino acid content of G diets decreased. The SL pigs grew faster (P < 0.05) and had less (P < 0.001) ultrasound backfat throughout the study compared with the CL pigs. The SL pigs had less 10th rib backfat (P < 0.001) and tended to have larger longissimus muscle area (P = 0.09) than the CL pigs, which were reflected in greater rate (P < 0.001) and efficiency (P < 0.05) of lean accretion. Marbling (P < 0.05) and meat color (P = 0.07) scores were lower in the SL pigs. No grower diet x genotype interactions were observed in response criteria of interest. The results indicate that pigs subjected to dietary amino acid restrictions during the G phase (as low as 5.0 g lysine/kg) compensated completely in terms of growth rate and body composition regardless of the genotype. Compensatory growth can have a positive impact not only on the overall efficiency of pig production but also on the environment by reducing excretion of unused nutrients.

Effect of vitamin D3 supplementation level on the postmortem tenderization of beef from steers.

The objective of this experiment was to determine the effect of different doses of vitamin D3 (VITD) on beef feedlot performance, plasma and muscle Ca2+, tissue residues, and improvement of Warner-Bratzler shear force (WBS) and panel tenderness. A total of 167 steers were fed one of six levels of VITD. The VITD treatments (28 steers/treatment) were 0, 0.5 x 10(6), 1 x 10(6), 2.5 x 10(6), 5 x 10(6), and 7.5 x 10(6) IU/steer daily of VITD fed nine consecutive days before slaughter. Feedlot performance and plasma Ca2+ were measured during the last 21 days on feed. Warner-Bratzler shear force was measured on strip loin and top round steaks at 7, 10, 14, and 21 d postmortem. The VITD treatments of 5 and 7.5 x 10(6) IU/steer daily decreased (P < 0.05) ADG, and VITD supplementation of 2.5, 5, and 7.5 x 10(6) IU/steer daily decreased average dry matter feed intake (P < 0.05) at the end of the feeding trial. Plasma Ca2+ increased linearly with VITD treatment (P < 0.01). Calpastatin and calpain activity were not influenced by treatment (P > 0.05), but muscle Ca2+ was increased (P < 0.05) by VITD treatments of 1, 2.5, 5, and 7.5 10(6) IU/steer daily. Feeding VITD did not influence (P > 0.05) carcass quality or yield traits. Supplementing VITD at levels of 1, 2.5, 5, and 7.5 10(6) IU/steer daily increased (P < 0.05) VITD concentrations in strip loin and liver samples. Cooking liver decreased VITD concentrations 10 to 28%. Vitamin D3 treatments of 0.5 and 7.5 x 10(6) IU/d reduced strip loin steak WBS at d 7 (P < 0.05), but VITD treatments did not decrease strip loin steak WBS at any other time postmortem. The VITD treatments of 0.5, 1, and 5 x 10(6) IU/steer daily decreased top round steak WBS at 7 d, and all VITD treatments decreased 10-d top round steak WBS (P < 0.05). Supplementing steers with 0.5 x 10(6) IU/steer daily of VITD also decreased (P < 0.05) top round steak WBS at 21 d postmortem compared with controls. Sensory tenderness at 7 d postmortem was increased (P < 0.05) by all VITD treatments in top round steaks, yet strip loin tenderness scores were not affected (P > 0.05) by VITD treatment. Treatment with VITD quadratically decreased (P < 0.05) round WBS. Thus, VITD treatment will effectively improve tenderness when cattle tend to be tough and have no impact on cattle that produce tender beef. Feeding steers 0.5 x 10(6) IU of VITD daily for 9 d improved tenderness in two muscles without negatively affecting feedlot performance or tissue residues.

Slaughter plant location, USDA quality grade, external fat thickness, and aging time effects on sensory characteristics of beef loin strip steak.

A boneless beef strip loin (IMPS #180) was fabricated from each of 320 carcasses to study the effects of slaughter plant location, quality grade, fat thickness, and aging time on beef tenderness and palatability. Carcasses were selected for fat thickness (< .5 cm or > or = .5 cm fat thickness) and USDA quality grade (Select or Low Choice) from two slaughter facilities (IBP, Inc., Garden City, KS or Excel Inc., Plainview, TX), and the strips were aged for either 7 or 14 d. Aging steaks 14 d improved all sensory traits and Warner-Bratzler shear (WBS) values regardless of all other main effects (P < .05). Steaks from Choice carcasses that were processed in Kansas had higher initial and sustained tenderness ratings than steaks from carcasses that were processed in Texas or Select steaks from Kansas after 7 d of aging (P < .05). However, aging for 14 d removed differences from all sensory characteristics of steaks from Kansas and Texas. All sensory scores for steaks from carcasses that graded Choice were higher than those from carcasses that graded Select (P < .05). The USDA quality grade did not affect WBS values, and fat thickness did not affect sensory characteristics or WBS values (P > .05). Therefore, aging beef strip loin steaks for 14 compared with 7 d improved sensory score and decreased WBS values, but fat thickness had no effect on the palatability of loin strip steaks processed under these conditions.