Fabrication of silica/calcium alginate nanocomposite based on rice husk ash for efficient adsorption of phenol from water.

The current work discusses the synthesis of three different solid adsorbents: silica nanoparticles derived from rice husk (RS), calcium alginate beads (AG), and silica/alginate nanocomposite (RSG). The fabricated solid adsorbents were characterized by using different physicochemical techniques such as TGA, XRD, nitrogen adsorption/desorption analysis, ATR-FTIR, pHPZC, SEM, and TEM. The adsorption efficiencies of the prepared solid adsorbents were considered for the removal of phenol as a selected hazardous pollutant. Because of its improved adsorption capacity and environmentally friendly character, a composite made of biosilica nanoparticles and naturally occurring alginate biopolymer by click chemistry is significant in environmental treatment. Adding silica nanoparticles to the alginate biopolymer hydrogel has many advantages, including increased surface area, easier recovery of the solid adsorbent, and additional surface chemical functional groups. The silica/alginate nanocomposite showed surface heterogeneity with many chemical functional groups present, whereas silica nanoparticles had the highest surface area (893.1 m2 g-1). It has been found that the average TEM particle size of RS, AG, and RSG was between 18 and 82 nm. RSG displayed the maximum adsorption capacity of phenol (100.55 mg g-1) at pH 7 and 120 min as equilibrium adsorption time. Adsorption of phenol onto the solid adsorbents fit well with a nonlinear Langmuir isotherm with favorable adsorption. Kinetic and thermodynamic studies prove that the adsorption process follows a pseudo-second-order kinetic model, endothermic process, physical, and spontaneous adsorption. Sodium hydroxide is effective in desorbing 94% of the loaded phenols, according to desorption investigations. Solid reusability tests showed that, after seven cycles of phenol adsorption/desorption, RSG lost only 8.8% of its adsorption activity.

Fabrication of melamine formaldehyde/graphene oxide composite for efficient static and dynamic adsorption of lead ions from aqueous medium.

The present work discusses the synthesis, characterization, and environmental applications of graphene oxide (GO), melamine formaldehyde resin (MF), and melamine formaldehyde/graphene oxide composite (MGO) for the efficient removal of Pb2+ from aqueous medium via batch and column procedures. TGA, XRD, TEM, zeta potential, nitrogen adsorption/desorption, ATR-FTIR, and other characterization techniques revealed that MGO is characterized by a greater surface area (609 m2/g), total pore volume (1.0106 cm3/g), pHPZC (6.5), and the presence of various surface chemical functional groups. The synthesized solid adsorbents were used in both static and dynamic adsorption processes to remove Pb2+, with varying application parameters such as pH, starting concentration, adsorbent dosage, and shaking time in the case of static adsorption method. While through the column adsorption process the effects of column bed height, flow rate, and starting Pb2+ were taken into consideration. Results of the batch adsorption demonstrated that MGO had the highest Langmuir adsorption capacity (201.5 mg/g), and the adsorption fit the nonlinear Langmuir adsorption model and Elovich kinetic models. The adsorption of Pb2+ onto all prepared solid materials is endothermic, spontaneous, and physical in nature, as demonstrated by thermodynamic studies. Column adsorption of Pb2+ well fitted by Thomas and Yoon Nelson nonlinear adsorption models. MGO showed a maximum column adsorption capacity of 168 mg/g when applying 4 cm, 15 mL/min, and 150 mg/L as bed height, flow rate, and initial Pb2+, respectively. With only a 12.6% reduction in its adsorption capacity, column regeneration showed that MGO exhibited a high degree of reusability even after five cycles of adsorption/desorption studies.

Fabrication of graphitic carbon nitride/gum Arabic/potassium carrageenan composite for efficient adsorption of erythromycin: Kinetic and thermodynamic studies.

Erythromycin (ERY) molecules are robust to the environment and hard to remove due to their aromatic structure. Nowadays, numerous researches have reported that the ERY amount in water is above the standard level and its removal is necessary. Here, we prepared three solid adsorbents: graphitic carbon nitride (g-C3N4), potassium carrageenan beads (Cr), and graphitic carbon nitride/gum Arabic/potassium carrageenan composite (g-ACr). Several techniques such as XRD, SEM, TEM, TGA, ATR-FTIR, Zeta potential, and N2 adsorption were employed to characterize the fabricated adsorbents. Five essential factors of adsorbent dose, initial ERY concentration, contact time, temperature, and pH were optimized to investigate the batch adsorption of ERY. The maximum adsorption capacity of 356.12 mg/g was attained by g-ACr composite at an adsorbent dose of 1.25 g/L, contact time of 6 h, and pH 7 at 15 °C. The data showed that the experimental findings exhibited the best agreement with Langmuir, Temkin, and DR isotherm models, in addition to the kinetic models of pseudo-second-order, Elovich, and intra-particle diffusion. The evaluated thermodynamic factors designated that the ERY adsorption is endothermic, physisorption, favorable, and spontaneous process. The g-ACr reusability displayed a decline in the adsorption capacity after seven adsorption/desorption runs by 5.7 %. Finally, this work outcomes depict that g-ACr composite is an efficient reusable adsorbent for ERY elimination from wastewater.

Fabrication and characterization of Araucaria gum/calcium alginate composite beads for batch and column adsorption of lead ions.

In this work, we developed five solid adsorbents such as calcium alginate beads (CG), Araucaria gum (AR) extracted from Araucaria heterophylla tree by chemical precipitation procedures, and Araucaria gum/calcium alginate composite beads (CR21, CR12, and CR11) prepared with different calcium alginate: Araucaria gum ratios (2:1, 1:2, and 1:1, respectively). The synthesized solid adsorbents were characterized utilizing TGA, XRD, nitrogen adsorption/desorption analysis, ATR-FTIR, pHPZC, swelling ratio, SEM, and TEM. Through the batch and column adsorption strategies, we evaluated the effect of adsorbent dose, pH, initial Pb (II) concentration, shaking time, bed height, and flow rate. The data of batch technique indicated that CR11 demonstrated a maximum batch adsorption capacity of 149.95 mg/g at 25 °C. Lead ions adsorption was well fitted by pseudo-second order and Elovich according to kinetic studies, in addition to Langmuir and Temkin models based on adsorption isotherm studies onto all the samples. Thermodynamic investigation showed that Pb (II) adsorption process is an endothermic, physical, and spontaneous process. The highest column adsorption capacity (161.1 mg/g) was achieved by CR11 at a bed height of 3 cm, flow rate of 10 mL/min, and initial Pb+2 concentration of 225 mg/L with 68 min as breakthrough time and 180 min as exhaustion time. Yoon-Nelson and Thomas models applied well the breakthrough curves of Pb (II) column adsorption. The maximum column adsorption capacity was decreased by 11.4 % after four column adsorption/desorption processes. Our results revealed that CR11 had an excellent adsorption capacity, fast kinetics, and good selectivity, emphasizing its potential for its applications in water treatment.

Polymorphic phase transformations of 3-chloro-trans-cinnamic acid and its solid solution with 3-bromo-trans-cinnamic acid.

We have investigated the polymorphic phase transformations above ambient temperature for 3-chloro-trans-cinnamic acid (3-ClCA, C9H7ClO2) and a solid solution of 3-ClCA and 3-bromo-trans-cinnamic acid (3-BrCA, C9H7BrO2). At 413 K, the γ polymorph of 3-ClCA transforms to the ß polymorph. Interestingly, the structure of the ß polymorph of 3-ClCA obtained in this transformation is different from the structure of the ß polymorph of 3-BrCA obtained in the corresponding polymorphic transformation from the γ polymorph of 3-BrCA, even though the γ polymorphs of 3-ClCA and 3-BrCA are isostructural. We also report a high-temperature phase transformation from a γ-type structure to a ß-type structure for a solid solution of 3-ClCA and 3-BrCA (with a molar ratio close to 1:1). The γ polymorph of the solid solution is isostructural with the γ polymorphs of pure 3-ClCA and pure 3-BrCA, while the ß-type structure produced in the phase transformation is structurally similar to the ß polymorph of pure 3-BrCA.