Au-Pd separation enhances bimetallic catalysis of alcohol oxidation.

In oxidation reactions catalysed by supported metal nanoparticles with oxygen as the terminal oxidant, the rate of the oxygen reduction can be a limiting factor. This is exemplified by the oxidative dehydrogenation of alcohols, an important class of reactions with modern commercial applications1-3. Supported gold nanoparticles are highly active for the dehydrogenation of the alcohol to an aldehyde4 but are less effective for oxygen reduction5,6. By contrast, supported palladium nanoparticles offer high efficacy for oxygen reduction5,6. This imbalance can be overcome by alloying gold with palladium, which gives enhanced activity to both reactions7,8,9; however, the electrochemical potential of the alloy is a compromise between that of the two metals, meaning that although the oxygen reduction can be improved in the alloy, the dehydrogenation activity is often limited. Here we show that by separating the gold and palladium components in bimetallic carbon-supported catalysts, we can almost double the reaction rate compared with that achieved with the corresponding alloy catalyst. We demonstrate this using physical mixtures of carbon-supported monometallic gold and palladium catalysts and a bimetallic catalyst comprising separated gold and palladium regions. Furthermore, we demonstrate electrochemically that this enhancement is attributable to the coupling of separate redox processes occurring at isolated gold and palladium sites. The discovery of this catalytic effect-a cooperative redox enhancement-offers an approach to the design of multicomponent heterogeneous catalysts.

Methane Oxidation to Methanol.

The direct transformation of methane to methanol remains a significant challenge for operation at a larger scale. Central to this challenge is the low reactivity of methane at conditions that can facilitate product recovery. This review discusses the issue through examination of several promising routes to methanol and an evaluation of performance targets that are required to develop the process at scale. We explore the methods currently used, the emergence of active heterogeneous catalysts and their design and reaction mechanisms and provide a critical perspective on future operation. Initial experiments are discussed where identification of gas phase radical chemistry limited further development by this approach. Subsequently, a new class of catalytic materials based on natural systems such as iron or copper containing zeolites were explored at milder conditions. The key issues of these technologies are low methane conversion and often significant overoxidation of products. Despite this, interest remains high in this reaction and the wider appeal of an effective route to key products from C-H activation, particularly with the need to transition to net carbon zero with new routes from renewable methane sources is exciting.

Two microbiota subtypes identified in irritable bowel syndrome with distinct responses to the low FODMAP diet.

OBJECTIVE: Reducing FODMAPs (fermentable oligosaccharides, disaccharides, monosaccharides and polyols) can be clinically beneficial in IBS but the mechanism is incompletely understood. We aimed to detect microbial signatures that might predict response to the low FODMAP diet and assess whether microbiota compositional and functional shifts could provide insights into its mode of action. DESIGN: We used metagenomics to determine high-resolution taxonomic and functional profiles of the stool microbiota from IBS cases and household controls (n=56 pairs) on their usual diet. Clinical response and microbiota changes were studied in 41 pairs after 4 weeks on a low FODMAP diet. RESULTS: Unsupervised analysis of baseline IBS cases pre-diet identified two distinct microbiota profiles, which we refer to as IBSP (pathogenic-like) and IBSH (health-like) subtypes. IBSP microbiomes were enriched in Firmicutes and genes for amino acid and carbohydrate metabolism, but depleted in Bacteroidetes species. IBSH microbiomes were similar to controls. On the low FODMAP diet, IBSH and control microbiota were unaffected, but the IBSP signature shifted towards a health-associated microbiome with an increase in Bacteroidetes (p=0.009), a decrease in Firmicutes species (p=0.004) and normalisation of primary metabolic genes. The clinical response to the low FODMAP diet was greater in IBSP subjects compared with IBSH (p=0.02). CONCLUSION: 50% of IBS cases manifested a 'pathogenic' gut microbial signature. This shifted towards the healthy profile on the low FODMAP diet; and IBSP cases showed an enhanced clinical responsiveness to the dietary therapy. The effectiveness of FODMAP reduction in IBSP may result from the alterations in gut microbiota and metabolites produced. Microbiota signatures could be useful as biomarkers to guide IBS treatment; and investigating IBSP species and metabolic pathways might yield insights regarding IBS pathogenic mechanisms.

Methane Oxidation to Methanol in Water.

Methane represents one of the most abundant carbon sources for fuel or chemical production. However, remote geographical locations and high transportation costs result in a substantial proportion being flared at the source. The selective oxidation of methane to methanol remains a grand challenge for catalytic chemistry due to the large energy barrier for the initial C-H activation and prevention of overoxidation to CO2. Indirect methods such as steam reforming produce CO and H2 chemical building blocks, but they consume large amounts of energy over multistage processes. This makes the development of the low-temperature selective oxidation of methane to methanol highly desirable and explains why it has remained an active area of research over the last 50 years.The thermodynamically favorable oxidation of methane to methanol would ideally use only molecular oxygen. Nature effects this transformation with the enzyme methane monooxygenase (MMO) in aqueous solution at ambient temperature with the addition of 2 equiv of a reducing cofactor. MMO active sites are Fe and Cu oxoclusters, and the incorporation of these metals into zeolitic frameworks can result in biomimetic activity. Most approaches to methane oxidation using metal-doped zeolites use high temperature with oxygen or N2O; however, demonstrations of catalytic cycles without catalyst regeneration cycles are limited. Over the last 10 years, we have developed Fe-Cu-ZSM-5 materials for the selective oxidation of methane to methanol under aqueous conditions at 50 °C using H2O2 as an oxidant (effectively O2 + 2 reducing equiv), which compete with MMO in terms of activity. To date, these materials are among the most active and selective catalysts for methane oxidation under this mild condition, but industrially, H2O2 is an expensive oxidant to use in the production of methanol.This observation of activity under mild conditions led to new approaches to utilize O2 as the oxidant. Supported precious metal nanoparticles have been shown to be active for a range of C-H activation reactions using O2 and H2O2, but the rapid decomposition of H2O2 over metal surfaces limits efficiency. We identified that this decomposition could be minimized by removing the support material and carrying out the reaction with colloidal AuPd nanoparticles. The efficiency of methanol production with H2O2 consumption was increased by 4 orders of magnitude, and crucially it was demonstrated for the first time that molecular O2 could be incorporated into the methanol produced with 91% selectivity. The understanding gained from these two approaches provides valuable insight into possible new routes to selective methane oxidation which will be presented here in the context of our own research in this area.

Role of the Support in Gold-Containing Nanoparticles as Heterogeneous Catalysts.

In this review, we discuss selected examples from recent literature on the role of the support on directing the nanostructures of Au-based monometallic and bimetallic nanoparticles. The role of support is then discussed in relation to the catalytic properties of Au-based monometallic and bimetallic nanoparticles using different gas phase and liquid phase reactions. The reactions discussed include CO oxidation, aerobic oxidation of monohydric and polyhydric alcohols, selective hydrogenation of alkynes, hydrogenation of nitroaromatics, CO2 hydrogenation, C-C coupling, and methane oxidation. Only studies where the role of support has been explicitly studied in detail have been selected for discussion. However, the role of support is also examined using examples of reactions involving unsupported metal nanoparticles (i.e., colloidal nanoparticles). It is clear that the support functionality can play a crucial role in tuning the catalytic activity that is observed and that advanced theory and characterization add greatly to our understanding of these fascinating catalysts.

Stable amorphous georgeite as a precursor to a high-activity catalyst.

Copper and zinc form an important group of hydroxycarbonate minerals that include zincian malachite, aurichalcite, rosasite and the exceptionally rare and unstable--and hence little known and largely ignored--georgeite. The first three of these minerals are widely used as catalyst precursors for the industrially important methanol-synthesis and low-temperature water-gas shift (LTS) reactions, with the choice of precursor phase strongly influencing the activity of the final catalyst. The preferred phase is usually zincian malachite. This is prepared by a co-precipitation method that involves the transient formation of georgeite; with few exceptions it uses sodium carbonate as the carbonate source, but this also introduces sodium ions--a potential catalyst poison. Here we show that supercritical antisolvent (SAS) precipitation using carbon dioxide (refs 13, 14), a process that exploits the high diffusion rates and solvation power of supercritical carbon dioxide to rapidly expand and supersaturate solutions, can be used to prepare copper/zinc hydroxycarbonate precursors with low sodium content. These include stable georgeite, which we find to be a precursor to highly active methanol-synthesis and superior LTS catalysts. Our findings highlight the value of advanced synthesis methods in accessing unusual mineral phases, and show that there is room for exploring improvements to established industrial catalysts.

Sulfur Promotion in Au/C Catalyzed Acetylene Hydrochlorination.

The formation of highly active and stable acetylene hydrochlorination catalysts is of great industrial importance. The successful replacement of the highly toxic mercuric chloride catalyst with gold has led to a flurry of research in this area. One key aspect, which led to the commercialization of the gold catalyst is the use of thiosulphate as a stabilizing ligand. This study investigates the use of a range of sulfur containing compounds as promoters for production of highly active Au/C catalysts. Promotion is observed across a range of metal sulfates, non-metal sulfates, and sulfuric acid treatments. This observed enhancement can be optimized by careful consideration of either pre- or post-treatments, concentration of dopants used, and modification of washing steps. Pre-treatment of the carbon support with sulfuric acid (0.76 m) resulted in the most active Au/C in this series with an acetylene conversion of ≈70% at 200 °C.

Single-enzyme biomineralization of cadmium sulfide nanocrystals with controlled optical properties.

Nature has evolved several unique biomineralization strategies to direct the synthesis and growth of inorganic materials. These natural systems are complex, involving the interaction of multiple biomolecules to catalyze biomineralization and template growth. Herein we describe the first report to our knowledge of a single enzyme capable of both catalyzing mineralization in otherwise unreactive solution and of templating nanocrystal growth. A recombinant putative cystathionine γ-lyase (smCSE) mineralizes CdS from an aqueous cadmium acetate solution via reactive H2S generation from l-cysteine and controls nanocrystal growth within the quantum confined size range. The role of enzymatic nanocrystal templating is demonstrated by substituting reactive Na2S as the sulfur source. Whereas bulk CdS is formed in the absence of the enzyme or other capping agents, nanocrystal formation is observed when smCSE is present to control the growth. This dual-function, single-enzyme, aerobic, and aqueous route to functional material synthesis demonstrates the powerful potential of engineered functional material biomineralization.

Benzyl alcohol oxidation with Pd-Zn/TiO2: computational and experimental studies.

Pd-Zn/TiO2 catalysts containing 1 wt% total metal loading, but with different Pd to Zn ratios, were prepared using a modified impregnation method and tested in the solvent-free aerobic oxidation of benzyl alcohol. The catalyst with the higher Pd content exhibited an enhanced activity for benzyl alcohol oxidation. However, the selectivity to benzaldehyde was significantly improved with increasing presence of Zn. The effect of reduction temperature on catalyst activity was investigated for the catalyst having a Pd to Zn metal molar ratio of 9:1. It was found that lower reduction temperature leads to the formation of PdZn nanoparticles with a wide particle size distribution. In contrast, smaller PdZn particles were formed upon catalyst reduction at higher temperatures. Computational studies were performed to compare the adsorption energies of benzyl alcohol and the reaction products (benzaldehyde and toluene) on PdZn surfaces to understand the oxidation mechanism and further explain the correlation between the catalyst composition and its activity.

The Role of Copper Speciation in the Low Temperature Oxidative Upgrading of Short Chain Alkanes over Cu/ZSM-5 Catalysts.

Partial oxidative upgrading of C1 -C3 alkanes over Cu/ZSM-5 catalysts prepared by chemical vapour impregnation (CVI) has been studied. The undoped ZSM-5 support is itself able to catalyse selective oxidations, for example, methane to methanol, using mild reaction conditions and the green oxidant H2 O2 . Addition of Cu suppresses secondary oxidation reactions, affording methanol selectivities of up to 97 %. Characterisation studies attribute this ability to population of specific Cu sites below the level of total exchange (Cu/Al<0.5). These species also show activity for radical-based methane oxidation, with productivities exceeding those of the parent zeolite supports. When tested for ethane and propane oxidation reactions, comparable trends are observed.

Acetarsol Suppositories: Effective Treatment for Refractory Proctitis in a Cohort of Patients with Inflammatory Bowel Disease.

BACKGROUND: Management of proctitis refractory to conventional therapies presents a common clinical problem. The use of acetarsol suppositories, which are derived from organic arsenic, was first described in 1965. Data concerning clinical efficacy and tolerability are very limited. AIM: To examine the efficacy of acetarsol suppositories for the treatment of refractory proctitis. METHODS: A retrospective analysis was performed on patients with inflammatory bowel disease treated with acetarsol suppositories between 2008 and 2014 at Addenbrooke's Hospital, Cambridge, United Kingdom. Clinical response was defined as resolution of symptoms back to baseline at the time of next clinic review. RESULTS: Thirty-nine patients were prescribed acetarsol suppositories between March 2008 and July 2014 (29 patients with ulcerative colitis, nine with Crohn's disease, and one with indeterminate colitis). Thirty-eight were included for analysis. The standard dose of acetarsol was 250 mg twice daily per rectum for 4 weeks. Clinical response was observed in 26 patients (68%). Of the 11 patients who had endoscopic assessment before and after treatment, nine (82%) showed endoscopic improvement and five (45%) were in complete remission (Wilcoxon signed-rank test p = 0.006). One patient developed a macular skin rash 1 week after commencing acetarsol, which resolved within 4 weeks of drug cessation. CONCLUSION: Acetarsol was effective for two out of every three patients with refractory proctitis. This cohort had failed a broad range of topical and systemic treatments, including anti-TNFα therapy. Clinical efficacy was reflected in significant endoscopic improvement. Adverse effects of acetarsol were rare.

The microbiome of translocated bacterial populations in patients with and without inflammatory bowel disease.

BACKGROUND: Using culture-based methods, bacterial translocation from the gut to draining mesenteric lymph nodes is seen in 5% of normal controls and up to 33% of patients with inflammatory bowel diseases (IBD). Many bacteria cannot be cultured, so these methods are unable to capture the full spectrum of bacteria present. AIMS: To detect viable bacteria in lymph nodes of patients with IBD and non-IBD controls using bacterial RNA as a surrogate for viability and to compare them with the same patient's gut microbiome. METHODS: Bacterial RNA was extracted from lymph nodes and mucosa of 20 patients who had undergone intestinal resection (10 IBD, 10 non-IBD). A previous study had detected bacterial DNA in these patients' lymph nodes; 16S rRNA gene high-throughput sequencing was performed. RESULTS: Bacterial RNA was detected in the lymph nodes of five patients with IBD and three controls (volvulus, diverticulitis and bowel obstruction). Lymph nodes had higher alpha (within sample) diversity compared to mucosal samples (Shannon diversity index 2.41 vs 1.81, one-way ANOVA P = 0.035). Beta diversity (inter-sample variation: lymph node vs intestine) was similar within individuals and did not differ between groups. Common gene polymorphisms linked with IBD (NOD2, ATG16L1, IRGM and IL23R) were not associated with bacterial translocation. CONCLUSIONS: Metabolically active bacteria mirroring the individual's gut microbiome were commonly found in the lymph nodes of patients with IBD undergoing resection. An increase in lymph node alpha diversity is likely due to the larger drainage area. The presence of viable bacteria in non-IBD controls is also not unexpected given the underlying pathology in these patients.

Catalytic Partial Oxidation of Cyclohexane by Bimetallic Ag/Pd Nanoparticles on Magnesium Oxide.

The liquid-phase oxidation of cyclohexane to cyclohexanol and cyclohexanone was investigated by synthesizing and testing an array of heterogeneous catalysts comprising: monometallic Ag/MgO, monometallic Pd/MgO and a set of bimetallic AgPd/MgO catalysts. Interestingly, Ag/MgO was capable of a conversion comparable to current industrial routes of approximately 5 %, and with a high selectivity (up to 60 %) to cyclohexanol, thus making Ag/MgO an attractive system for the synthesis of intermediates for the manufacture of nylon fibres. Furthermore, following the doping of Ag nanoparticles with Pd, the conversion increased up to 10 % whilst simultaneously preserving a high selectivity to the alcohol. Scanning transmission electron microscopy and energy dispersive spectroscopy of the catalysts showed a systematic particle-size-composition variation with the smaller Ag-Pd nanoparticles being statistically richer in Pd. Analysis of the reaction mixture by electron paramagnetic resonance (EPR) spectroscopy coupled with the spin-trapping technique showed the presence of large amounts of alkoxy radicals, thus providing insights for a possible reaction mechanism.

Template-Induced Structuring and Tunable Polymorphism of Three-Dimensionally Ordered Mesoporous (3DOm) Metal Oxides.

Convectively assembled colloidal crystal templates, composed of size-tunable (ca. 15-50 nm) silica (SiO2) nanoparticles, enable versatile sacrificial templating of three-dimensionally ordered mesoporous (3DOm) metal oxides (MOx) at both mesoscopic and microscopic size scales. Specifically, we show for titania (TiO2) and zirconia (ZrO2) how this approach not only enables the engineering of the mesopore size, pore volume, and surface area but can also be leveraged to tune the crystallite polymorphism of the resulting 3DOm metal oxides. Template-mediated volumetric (i.e., interstitial) effects and interfacial factors are shown to preserve the metastable crystalline polymorphs of each corresponding 3DOm oxide (i.e., anatase TiO2 (A-TiO2) and tetragonal ZrO2 (t-ZrO2)) during high-temperature calcination. Mechanistic investigations suggest that this polymorph stabilization is derived from the combined effects of the template-replica (MOx/SiO2) interface and simultaneous interstitial confinement that limit the degree of coarsening during high-temperature calcination of the template-replica composite. The result is the identification of a facile yet versatile templating strategy for realizing 3DOm oxides with (i) surface areas that are more than an order of magnitude larger than untemplated control samples, (ii) pore diameters and volumes that can be tuned across a continuum of size scales, and (iii) selectable polymorphism.

Activation and Deactivation of Gold/Ceria-Zirconia in the Low-Temperature Water-Gas Shift Reaction.

Gold (Au) on ceria-zirconia is one of the most active catalysts for the low-temperature water-gas shift reaction (LTS), a key stage of upgrading H2 reformate streams for fuel cells. However, this catalyst rapidly deactivates on-stream and the deactivation mechanism remains unclear. Using stop-start scanning transmission electron microscopy to follow the exact same area of the sample at different stages of the LTS reaction, as well as complementary X-ray photoelectron spectroscopy, we observed the activation and deactivation of the catalyst at various stages. During the heating of the catalyst to reaction temperature, we observed the formation of small Au nanoparticles (NPs; 1-2 nm) from subnanometer Au species. These NPs were then seen to agglomerate further over 48 h on-stream, and most rapidly in the first 5 h when the highest rate of deactivation was observed. These findings suggest that the primary deactivation process consists of the loss of active sites through the agglomeration and possible dewetting of Au NPs.

Strategies for designing supported gold-palladium bimetallic catalysts for the direct synthesis of hydrogen peroxide.

Hydrogen peroxide is a widely used chemical but is not very efficient to make in smaller than industrial scale. It is an important commodity chemical used for bleaching, disinfection, and chemical manufacture. At present, manufacturers use an indirect process in which anthraquinones are sequentially hydrogenated and oxidized in a manner that hydrogen and oxygen are never mixed. However, this process is only economic at a very large scale producing a concentrated product. For many years, the identification of a direct process has been a research goal because it could operate at the point of need, producing hydrogen peroxide at the required concentration for its applications. Research on this topic has been ongoing for about 100 years. Until the last 10 years, catalyst design was solely directed at using supported palladium nanoparticles. These catalysts require the use of bromide and acid to arrest peroxide decomposition, since palladium is a very active catalyst for hydrogen peroxide hydrogenation. Recently, chemists have shown that supported gold nanoparticles are active when gold is alloyed with palladium because this leads to a significant synergistic enhancement in activity and importantly selectivity. Crucially, bimetallic gold-based catalysts do not require the addition of bromide and acids, but with carbon dioxide as a diluent its solubility in the reaction media acts as an in situ acid promoter, which represents a greener approach for peroxide synthesis. The gold catalysts can operate under intrinsically safe conditions using dilute hydrogen and oxygen, yet these catalysts are so active that they can generate peroxide at commercially significant rates. The major problem associated with the direct synthesis of hydrogen peroxide concerns the selectivity of hydrogen usage, since in the indirect process this factor has been finely tuned over decades of operation. In this Account, we discuss how the gold-palladium bimetallic catalysts have active sites for the synthesis and hydrogenation of hydrogen peroxide that are different, in contrast to monometallic palladium in which synthesis and hydrogenation operate at the same sites. Through treatment of the support with acids prior to the deposition of the gold-palladium bimetallic particles, we can obtain a catalyst that can make hydrogen peroxide at a very high rate without decomposing or hydrogenating the product. This innovation opens up the way to design improved catalysts for the direct synthesis process, and these possibilities are described in this Account.

Strategies for the synthesis of supported gold palladium nanoparticles with controlled morphology and composition.

The discovery that supported gold nanoparticles are exceptionally effective catalysts for redox reactions has led to an explosion of interest in gold nanoparticles. In addition, incorporating a second metal as an alloy with gold can enhance the catalyst performance even more. The addition of small amounts of gold to palladium, in particular, and vice versa significantly enhances the activity of supported gold-palladium nanoparticles as redox catalysts through what researchers believe is an electronic effect. In this Account, we describe and discuss methodologies for the synthesis of supported gold-palladium nanoparticles and their use as heterogeneous catalysts. In general, three key challenges need to be addressed in the synthesis of bimetallic nanoparticles: (i) control of the particle morphology, (ii) control of the particle size distribution, and (iii) control of the nanoparticle composition. We describe three methodologies to address these challenges. First, we discuss the relatively simple method of coimpregnation. Impregnation allows control of particle morphology during alloy formation but does not control the particle compositions or the particle size distribution. Even so, we contend that this method is the best preparation method in the catalyst discovery phase of any project, since it permits the investigation of many different catalyst structures in one experiment, which may aid the identification of new catalysts. A second approach, sol-immobilization, allows enhanced control of the particle size distribution and the particle morphology, but control of the composition of individual nanoparticles is not possible. Finally, a modified impregnation method can allow the control of all three of these crucial parameters. We discuss the effect of the different methodologies on three redox reactions: benzyl alcohol oxidation, toluene oxidation, and the direct synthesis of hydrogen peroxide. We show that the coimpregnation method provides the best reaction selectivity for benzyl alcohol oxidation and the direct synthesis of hydrogen peroxide. However, because of the reaction mechanism, the sol-immobilzation method gives very active and selective catalysts for toluene oxidation. We discuss the possible nature of the preferred active structures of the supported nanoparticles for these reactions. This paper is based on the IACS Heinz Heinemann Award Lecture entitled "Catalysis using gold nanoparticles" which was given in Munich in July 2012.

Oxidation of benzyl alcohol and carbon monoxide using gold nanoparticles supported on MnO2 nanowire microspheres.

MnO2 was synthesised as a catalyst support material using a hydrothermal method. This involved reacting MnSO4⋅H2O and (NH4)2S2O8 at 120 °C for a range of crystallisation times, which affords control over the morphology and phase composition of the MnO2 formed. Gold was deposited on these supports using sol-immobilisation, impregnation and deposition precipitation methods, and the resultant materials were used for the oxidation of benzyl alcohol and carbon monoxide. The effect of the support morphology on the dispersion of the gold nanoparticles and the consequent effect on the catalytic performance is described and discussed.

The direct synthesis of hydrogen peroxide using platinum-promoted gold-palladium catalysts.

The direct synthesis of hydrogen peroxide offers a potentially green route to the production of this important commodity chemical. Early studies showed that Pd is a suitable catalyst, but recent work indicated that the addition of Au enhances the activity and selectivity significantly. The addition of a third metal using impregnation as a facile preparation method was thus investigated. The addition of a small amount of Pt to a CeO2-supported AuPd (weight ratio of 1:1) catalyst significantly enhanced the activity in the direct synthesis of H2O2 and decreased the non-desired over-hydrogenation and decomposition reactions. The addition of Pt to the AuPd nanoparticles influenced the surface composition, thus leading to the marked effects that were observed on the catalytic formation of hydrogen peroxide. In addition, an experimental approach that can help to identify the optimal nominal ternary alloy compositions for this reaction is demonstrated.