Iatrogenic Vertebral Arteriovenous Fistula Involving Brachiocephalic Vein Due to Central Venous Catheterization: A Case Report.

PURPOSE: To report a case of vertebral arteriovenous fistula (VAVF) caused by iatrogenic trauma of central venous catheterization (CVC) involving brachiocephalic vein (BCV). CASE REPORT: A 79-year-old female was referred for assessment of a vertebral artery (VA) aneurysm at the V1 segment. The patient had no signs other than a vascular murmur on the right neck and was diagnosed 20 years after undergoing CVC. Right vertebral angiography revealed a high-flow shunt from the V1 segment of the right VA and draining into the right BCV. The fistula had a single communication between a pseudoaneurysm and large varix. We diagnosed the patient with CVCinduced VAVF (CIVAVF) involving BCV and obliterated the shunt by selective transarterial and transvenous embolization of the pseudoaneurysm under flow control using a balloon catheter with no complications. CONCLUSION: This case highlights the point that CIVAVF involving BCV is rare but possible. In addition, there is a possibility that CIVAVF involving BCV does not demonstrate the findings of arterial steal or retrograde venous drainage and is undiagnosed for a long term due to lack of neurological manifestation and other subjective symptoms. We also showed that endovascular treatment can be feasible and useful for CIVAVF involving BCV.

Super-selective balloon test occlusion with electrophysiological monitoring to occlude angiographically invisible posterior communicating artery perforators with unruptured aneurysm.

Balloon test occlusion (BTO) can predict the ischemic complication risk associated with arterial occlusion. We present a case of an unruptured, broad-necked internal carotid artery-posterior communicating artery (PcomA) aneurysm that was successfully embolized after super-selective BTO of fetal PcomA with electrophysiological monitoring. The proximal portion of the PcomA was internally occluded without causing major neurological deficits, although we observed a small new infarction in the ipsilateral anterior thalamus postoperatively. We recognized small perforators arising from the proximal PcomA during a previous clipping surgery. Super-selective BTO with electrophysiological monitoring could be useful for functional preservation after infarction from angiographically invisible perforators.

Double-tube burr hole irrigation in the treatment of subdural empyema following chronic subdural hematoma surgery: A case report.

INTRODUCTION AND IMPORTANCE: Subdural empyema (SE) following chronic subdural hematoma (CSDH) surgery is an uncommon but serious complication. The best treatment approach, typically a choice between craniotomy and burr hole surgery, is still debated. This case report introduces an innovative method using burr hole surgery with double-tube irrigation, a potentially effective alternative to the more invasive craniotomy. CASE PRESENTATION: An 81-year-old male, 48 days post-CSDH surgery, developed SE with Methicillin-resistant Staphylococcus aureus infection. The initial treatment with burr hole drainage was complicated by recurrence, leading to a second procedure with double tubes inserted anteriorly and posteriorly for continuous irrigation therapy. The patient was treated with systemic antibiotics and vancomycin irrigation, resulting in successful resolution without further recurrence. CLINICAL DISCUSSION: While burr hole surgery is often deemed less effective than craniotomy for SE, this case demonstrates the potential efficacy of double-tube irrigation via burr hole surgery. This method could be especially beneficial when craniotomy poses significant risks. Continuous irrigation could help in managing intracranial pressure, making the intervention safer. However, further research is needed to refine this technique and establish clear treatment guidelines. CONCLUSION: Burr hole surgery with double-tube irrigation emerges as a promising treatment option for SE, especially when craniotomy is not feasible. This approach's success in this case encourages further exploration and study to validate its wider application in similar clinical scenarios.

Balloon-Assisted Stent Visualization: A Simple Technique for Precise Measurement of Previously Placed Stent Diameter.

Stent-assisted coil embolization is effective for treating intracranial aneurysms, improving outcomes and reducing recurrence rates. However, accurately measuring the diameter of a previously placed stent during imaging can be challenging due to coil artifacts. This poses difficulties in determining the coil packing and size of additional stents needed during retreatment. In a reported case, the use of a balloon enabled precise assessment of stent deployment. A 50-year-old male with a history of basilar artery-left superior cerebellar artery aneurysm underwent coil embolization, direct clipping, and stent-assisted coil embolization (SAC) over a span of 14 years. However, the aneurysm showed reenlargement over time. To address the recurrence, a balloon was used to assess the previously placed Neuroform Atlas stent. Additional coils were inserted outside the stent, and a Low-profile Visualized Intraluminal Support Blue stent was added. Postoperatively, there were no new neurological issues, and a follow-up magnetic resonance imaging showed no ischemic lesions . Balloon-assisted stent visualization (BASV) may be a useful method in the retreatment of SAC. It has the potential to provide valuable information for treatment planning.

Clinical Significance of Stiffness during Endoscopic Surgery for Intracerebral Hemorrhage: A Retrospective Study.

Studies regarding hematoma stiffness and removal difficulty are scarce. This study explored the association between hematoma stiffness and surgical results of endoscopic hematoma removal for intracerebral hemorrhage. It also aimed to clarify factors associated with hematoma stiffness. We classified intracerebral hematoma as either soft or firm stiffness by retrospectively evaluating operative videos by two neurosurgeons. The interobserver reliability of the classification was assessed by calculating the κ values. We investigated the relationship between hematoma stiffness and surgical results. Favorable hematoma removal (FHR) was defined as a residual hematoma volume of ≤15 mL or removal rate of ≥70%. Furthermore, we compared the background characteristics, imaging findings, and laboratory data between the two groups. Forty patients were included in this study. The mean baseline hematoma volume was 69.9 mL (range, 41.3-97.6 mL). FHR was accomplished in 35 cases (87.5%). Thirty-four patients (85%) were in the soft hematoma group (group S). Six patients (15%) were in the firm hematoma group (group F). Classification of hematoma stiffness demonstrated an excellent degree of interobserver agreement (κ score = 0.91). Patients in group S had a high FHR rate (p = 0.018) and short endoscopic procedure times (p = 0.00034). The island sign was present in group S (p = 0.030). Patients in group F had significantly high fibrinogen levels (p = 0.049) and low serum total calcium (p = 0.032), hemoglobin (p = 0.041), and hematocrit (p = 0.011) levels. Hematoma stiffness during endoscopic surgery for intracerebral hemorrhage correlates with surgical results, including the endoscopic procedure time and accomplishing rate of FHR.

New load transfer structure to reduce body deformation in side collisions.

OBJECTIVE: In this research, body technology was established for side collisions with new IIHS MDB as a representative case. In the conventional body structure, most of the load received from the barrier is absorbed by bending deformation of the door beam and B-pillar, etc. For that reason, the body is subjected to large deformation before reaching the maximum load, and the deformation increases further when subjected to a high-energy collision. Therefore, the objective of this research is to create a structure that increases the load from the initiation of impact and suppresses the deformation of the car body. METHOD: An arched door beam was developed to reduce the bending moment by the axial load in the longitudinal direction generated during the deformation and to increase the load in the lateral direction. A principle equation was developed that uses the shape of the door beam as a variable. A prototype of the arched door beam was fabricated, and its performance was evaluated by an impactor test. A full-car simulation was conducted using a mass-produced sedan as a base, to which the arched door beam was added to verify the performance of the complete vehicle. RESULTS: The results of the impactor tests were evaluated using the load gradient, which was defined as the generated load divided by the amount of deformation. Compared to conventional straight door beams, the load gradient was 7.1 times higher. Full-car simulation results showed that for a gasoline-powered vehicle body weight, the body load gradient of the proposed structure was 4.7 times higher, and the body deformation adjacent to the dummy shoulder was reduced by 210 mm. Spine acceleration of the dummy was reduced by 56%. CONCLUSION: The body structure proposed in this research has the effect of increasing the load gradient and reducing body deformation and spine acceleration. It is expected to be applicable to EVs and FCVs, which require more energy absorption due to their increased vehicle weight.