High-power deep-ultraviolet light generation at 266†nm from frequency quadrupling of a picosecond pulsed 1064†nm laser with a Nd:YVO4 amplifier pumped by a 914†nm laser diode.

We report the generation of picosecond pulsed light at a 266 nm wavelength with an average power of 53 W. We developed a picosecond pulsed 1064 nm laser source with an average power of 261 W, a repetition rate of 1 MHz, and a pulse duration of 14 ps, using a gain-switched DFB laser diode as a seed laser and a 914 nm laser-diode-pumped Nd-doped YVO4 power amplifier. We achieved stable generation of 266 nm light with an average power of 53 W from frequency quadrupling using an LBO and a CLBO crystals. The amplified power of 261 W and the 266 nm average power of 53 W from the 914 nm pumped Nd:YVO4 amplifier are the highest ever reported, to the best of our knowledge.

Stable 10,000-hour operation of 20-W deep ultraviolet laser generation at 266†nm.

We report 10,000-hour stable operation of a 266-nm picosecond laser with an average power of 20 W. We have developed a narrow-linewidth, high-peak-power 1064-nm laser source with a repetition rate of 600 kHz, an average power of 129 W, a linewidth of 0.15 nm, and a pulse duration of 14 ps using a gain-switched DFB-LD as a picosecond pulse seed source and a four-stage power amplifier with an Nd:YVO4 crystal. A 266-nm laser with a maximum average power of 25.4 W was generated by frequency conversion using LBO and CLBO crystals and had a pulse duration of 8 ps and beam quality factor of 1.5 at 20W. To the best of our knowledge, we also demonstrated that the average power and the beam quality can be maintained for 10,000 hours for the first time. We have confirmed the durability of the developed deep ultraviolet laser for industrial applications.

High-power DUV picosecond pulse laser with a gain-switched-LD-seeded MOPA and large CLBO crystal.

We report the generation of a 266 nm deep ultraviolet (DUV) picosecond pulse with an average output power of 14 W by the fourth-harmonic generation (FHG) from two consecutive frequency-doubling stages of a 1064 nm pulse based on a gain-switched-laser-diode (LD)-seeded hybrid fiber/solid-state master oscillator and power amplifier (MOPA) system. Through the gain-switched operation of a narrow-spectral-linewidth distributed-feedback laser diode and by using a Yb-doped fiber and a two-stage ${\rm Nd}:{{\rm YVO}_4}$Nd:YVO4 solid-state amplifier, we achieved an average power of 46.5 W near the Fourier transform limit for a 13 ps pulse with a repetition rate of 200 kHz. The narrow linewidth pulse characteristics enabled highly efficient frequency conversion, and the efficiency of conversion from 532 to 266 nm was 54%, and from 1064 to 266 nm was 31%. The beam quality factor ${M^2}$M2 of the generated DUV pulse was below 1.2. The highly efficient FHG process resulted in appeasing thermal stress caused by nonlinear absorption in the crystal, and more than 5000 h of continuous operation were achieved without any power down or beam profile degradation.

MEMS reconfigurable metamaterial for terahertz switchable filter and modulator.

We demonstrate a reconfigurable metamaterial developed by surface micromachining technique on a low loss quartz substrate for a tunable terahertz filter application. The device implements a reconfigurable RF-MEMS (radio frequency - micro electro mechanical systems) capacitor within a split-ring resonator (SRR). Time-domain spectroscopy confirms that the tunability of the SRR resonance and thus the terahertz transmittance are electrostatically controlled by the RF-MEMS capacitor. Due to the high transparency and low loss of quartz used as a substrate, the device exhibits a high contrast switching performance of 16.5 dB at 480 GHz, which is also supported by the terahertz dynamic modulation measurement results. The device shows promise for tunable transmission terahertz optics.

1 W single-frequency Tm-doped ZBLAN fiber MOPA around 810 nm.

We demonstrate a tunable narrow-linewidth fiber MOPA system around 810 nm for the light source of the Sr optical lattice clock. The coherent cw light source with a wavelength of 813.42 nm was generated by a combination of a narrow linewidth external-cavity laser diode and a Tm-doped ZBLAN fiber amplifier, which was upconversion-pumped by an Yb-doped fiber laser at 1064 nm. The maximum output power of 1.1 W was obtained with the launched power of 17 W, which is the highest power obtained from a Tm-doped fiber amplifier ever reported.

Waveguide coupled air-slot photonic crystal nanocavity for optomechanics.

We investigate a structure consisting of two parallel GaAs thin membranes with an air-slot type photonic crystal (PhC) nanocavity, which is designed to achieve highly efficient optomechanical coupling. The structure shows a large theoretical optomechanical coupling factor of ~990 GHz/nm. We designed, fabricated, and performed optical characterization of a system consisting of a grating coupler, a PhC waveguide, and a PhC nanocavity, which achieves highly efficient vertical emission using the band folding technique. The experimentally obtained overall efficiency is about 0.3% for a microscope objective lens with a moderate numerical aperture of 0.65. This waveguide coupled air-slot PhC nanocavity with efficient vertical light coupling can be useful for on-chip cavity optomechanical systems.