A design approach for systems based on magnetic pulse compression.

A design approach giving the optimum number of stages in a magnetic pulse compression circuit and gain per stage is given. The limitation on the maximum gain per stage is discussed. The total system volume minimization is done by considering the energy storage capacitor volume and magnetic core volume at each stage. At the end of this paper, the design of a magnetic pulse compression based linear induction accelerator of 200 kV, 5 kA, and 100 ns with a repetition rate of 100 Hz is discussed with its experimental results.

Prepulse minimization in KALI-5000.

A pulse power system (1 MV, 50 kA, and 100 ns) based on Marx generator and Blumlein pulse forming line has been built for generating high power microwaves. The Blumlein configuration poses a prepulse problem and hence the diode gap had to be increased to match the diode impedance to the Blumlein impedance during the main pulse. A simple method to eliminate prepulse voltage using a vacuum sparkgap and a resistor is given. Another fundamental approach of increasing the inductance of Marx generator to minimize the prepulse voltage is also presented. Experimental results for both of these configurations are given.