White light-emitting electrochemical cells based on the Langmuir-Blodgett technique.

Light-emitting electrochemical cells (LECs) showing a white emission have been prepared with Langmuir-Blodgett (LB) films of the metallosurfactant bis[2-(2,4-difluorophenyl)pyridine][2-(1-hexadecyl-1H-1,2,3-triazol-4-yl)pyridine]iridium(III) chloride (1), which work with an air-stable Al electrode. They were prepared by depositing a LB film of 1 on top of a layer of poly(N,N'-diphenyl-N,N'-bis(4-hexylphenyl)-[1,1'-biphenyl]-4,4'-diamine (pTPD) spin-coated on indium tin oxide (ITO). The white color of the electroluminescence of the device contrasts with the blue color of the photoluminescence of 1 in solution and within the LB films. Furthermore, the crystal structure of 1 is reported together with the preparation and characterization of the Langmuir monolayers (π-A compression isotherms and Brewster angle microscopy (BAM)) and LB films of 1 (IR, UV-vis and emission spectroscopy, X-ray photoelectron spectroscopy (XPS), specular X-ray reflectivity (SXR), and atomic force microscopy (AFM)).

Patterning of magnetic bimetallic coordination nanoparticles of Prussian blue derivatives by the Langmuir-Blodgett technique.

We report a novel method to prepare patterns of nanoparticles over large areas of the substrate. This method is based on the adsorption of the negatively charged nanoparticles dispersed in an aqueous subphase onto a monolayer of the phospholipid dipalmitoyl-l-α-phosphatidylcholine (DPPC) at the air-water interface. It has been used to prepare patterns of nanoparticles of Prussian blue analogues (PBA) of different size (K(0.25)Ni[Fe(CN)(6)](0.75) (NiFe), K(0.25)Ni[Cr(CN)(6)](0.75) (NiCr), K(0.25)Ni[Co(CN)(6)](0.75) (NiCo), Cs(0.4)Co[Cr(CN)(6)](0.8) (CsCoCr), and Cs(0.4)Co[Fe(CN)(6)](0.9) (CsCoFe)). The behavior of DPPC monolayer at the air-water interface in the presence of the subphase of PBA nanoparticles has been studied by the compression isotherms and Brewster angle microscopy (BAM) images. Atomic force microscopy (AFM) of the transferred films on mica substrates shows that patterns of the nanoparticles are observed for a 10(-4) M concentration of the subphase, based on the nanoparticle precursors, at surface pressures between 1 and 6 mN/m and transfer velocities from 10 to 80 mm/min. Vertical, horizontal, or tilted fringes of the nanoparticles with respect to the transfer direction can be obtained depending on the transfer velocity and surface pressure.

Dual-emitting Langmuir-Blodgett film-based organic light-emitting diodes.

Langmuir-Blodgett (LB) films containing alternating layers of the metallosurfactants bis(4,4'-tridecyl-2,2'-bipyridine)-(4,4'-dicarboxy-2,2'-bipyridine) ruthenium(II)-bis(chloride) (1) and bis[2-(2,4-difluorophenyl)pyridine](4,4'-dinonadecyl-2,2'-bipyridine)iridium(III) chloride (2) have been prepared. Langmuir monolayers at the air-water interface of 1 and 2 with different anions in the subphase have been characterized by pi-A compression isotherms and Brewster angle microscopy (BAM). The transferred LB films have been characterized by IR, UV-vis and emission spectroscopy, and atomic force microscopy (AFM). Electroluminescent devices formed by LB films containing alternating layers of these two molecules show dual emission by simple mixing of the two emitters in a single LB film, and by preparing two stacked configurations, in which a LB layer of the ruthenium complexes is deposited on top of a LB layer of the iridium complexes and the inverse situation. The color of the electroluminescence can be tuned by changing the thickness of each LB layer. Due to efficient hole blocking of a layer of the iridium complexes when deposited on top of the layer of ruthenium complexes, in that configuration the green emission of the iridium complexes is suppressed. In the opposite case, excitons are generated in both layers although most likely preferentially in the layer of the iridium complexes.

Dual-emissive photoluminescent Langmuir-Blodgett films of decatungstoeuropate and an amphiphilic iridium complex.

Langmuir monolayers and Langmuir-Blodgett (LB) films of the decatungstoeuropate [Eu(W(5)O(18))(2)](9-) (EuW(10)) and the amphiphilic Ir complex 1 have been successfully fabricated by using the adsorption properties of the EuW(10) polyanion dissolved in the aqueous subphase onto a positively charged 1 monolayer at the air-water interface. The compression isotherms and Brewster angle microscopy (BAM) of monolayers of 1 on pure water (1 monolayer) and on a subphase containing 10(-6) M EuW(10) and 10(-3) M NaCl (1/EuW(10) monolayer) have been studied. Infrared and UV-vis spectroscopy of the transferred LB films indicate that EuW(10) and 1 molecules are incorporated within these LB films. X-ray reflectivity (SXR) and atomic force microscopy (AFM) experiments indicate that LB films of 1 present a heterogeneous morphology while 1/EuW(10) films show a flatter and more homogeneous surface as well as a layered structure with a periodicity of 4.1 nm. Mixed monolayers of 1 and DODA (dimethyldioctadecylammonium bromide) have been prepared with EuW(10) polyanions in the subphase to control the concentration of 1 and EuW(10) polyanions within the LB films. AFM and SXR experiments with the transferred LB films show that the dilution of 1 with DODA improves the layered structure. The luminescence of 1 is partially quenched by EuW(10) in the 1/EuW(10) LB films, while emission from EuW(10) is not detected. On the other hand, emission from both entities is preserved in the LB films prepared from mixed DODA/1 monolayers, in which the red and yellow emissions arise independently from EuW(10) and 1, respectively. The different DODA:1 ratios lead to changes in the emission color. Therefore, they constitute a promising color-tunable luminescent material.

Enhancing Light Emission in Interface Engineered Spin-OLEDs through Spin-Polarized Injection at High Voltages.

The quest for a spin-polarized organic light-emitting diode (spin-OLED) is a common goal in the emerging fields of molecular electronics and spintronics. In this device, two ferromagnetic (FM) electrodes are used to enhance the electroluminescence intensity of the OLED through a magnetic control of the spin polarization of the injected carriers. The major difficulty is that the driving voltage of an OLED device exceeds a few volts, while spin injection in organic materials is only efficient at low voltages. The fabrication of a spin-OLED that uses a conjugated polymer as bipolar spin collector layer and ferromagnetic electrodes is reported here. Through a careful engineering of the organic/inorganic interfaces, it is succeeded in obtaining a light-emitting device showing spin-valve effects at high voltages (up to 14 V). This allows the detection of a magneto-electroluminescence (MEL) enhancement on the order of a 2.4% at 9 V for the antiparallel (AP) configuration of the magnetic electrodes. This observation provides evidence for the long-standing fundamental issue of injecting spins from magnetic electrodes into the frontier levels of a molecular semiconductor. The finding opens the way for the design of multifunctional devices coupling the light and the spin degrees of freedom.

Molecular ionic junction for enhanced electronic charge transfer.

We present the first evidence of charge injection improvement in an organic electroluminescent device provided by a single ionic molecular layer. A hole-dominated, hybrid organic-inorganic light-emitting device is used as a probe to verify the effectiveness of the ionic compound monolayer on modifying the metal oxide cathode. The rearrangement of ions under an applied bias induces a strong field at the electrode-organic interface resulting in an enhancement of the electron injection into the organic semiconductor. A strong decrease in turn-on voltage for electroluminescence is observed for the device containing the ionic molecular monolayer.