Presence of leucocytes in prostatic secretions correlates with the severity of lower urinary tract symptoms.

We investigated the correlation between the presence of leucocytes in expressed prostatic secretion and the lower urinary tract symptom severity by retrospectively reviewing 699 men with lower urinary tract symptoms. The patients were evaluated by the International Prostate Symptoms Score and the Overactive Bladder Symptoms Score and underwent expressed prostatic secretion testing. Patients were classified into groups 1 and 2 based on the expressed prostatic secretion leucocyte count. The mean total and storage score of the International Prostate Symptoms Score, and mean total Overactive Bladder Symptoms Score were higher in group 1. Urine flow metrics showed that voided volume and maximum flow rate were lower in group 1. The scores for International Prostate Symptoms Score questions 4, 6 and 7 and Overactive Bladder Symptoms Score question 2 were higher in group 1 and showed a weak positive correlation with expressed prostatic secretion. Voided volume and maximum flow rate showed the strongest correlation, although International Prostate Symptoms Score question 7 and Overactive Bladder Symptoms Score question 2 were the only independent predictors of expressed prostatic secretion. Therefore, leucocytes in expressed prostatic secretion are associated with the lower urinary tract symptom severity, particularly nocturnal urination symptoms.

Obesity as a Risk Factor for Unfavorable Disease in Men with Low Risk Prostate Cancer and its Relationship with Anatomical Location of Tumor.

PURPOSE: We investigated the influence of obesity on unfavorable disease in men with low risk prostate cancer eligible for active surveillance and verified the underlying relationship with tumor location. MATERIALS AND METHODS: We analyzed the records of 890 patients with biopsy Gleason score 6 who underwent radical prostatectomy for prostate cancer via multicore (12 or more) biopsy at our institution. Unfavorable disease was defined as primary Gleason pattern 4 or greater, or pathological stage T3 or greater. Multivariate logistic regression analysis was performed to identify factors associated with unfavorable disease. The association of unfavorable disease with anatomical location of the index tumor was assessed. RESULTS: Overall 216 (24.3%), 544 (61.1%) and 130 men (14.6%) had a body mass index of less than 23 (normal), 23 to 27.5 (overweight) and 27.5 kg/m2 or greater (obese), respectively, according to established cutoff points for Asian men. Multivariate analysis showed that age, prostate volume and body mass index were independent factors for predicting unfavorable disease regardless of the various active surveillance criteria used. For Johns Hopkins Hospital criteria the risk of unfavorable disease was higher in obese patients than in normal weight patients (OR 3.30, p = 0.022). Unfavorable disease was more frequent in cases of transition zone cancer than nontransition zone cancer across all criteria for active surveillance (all p <0.01). Among men fulfilling Johns Hopkins Hospital criteria the proportion of transition zone cancer was 4.2% for normal weight, 11.6% for overweight and 16.7% for obesity, respectively (p = 0.022). CONCLUSIONS: Obese men with low risk prostate cancer who are eligible for active surveillance are at higher risk for unfavorable pathological features. Obese men more frequently had transition zone cancer, which was associated with unfavorable pathology findings in those with very low risk prostate cancer.

Recovery of renal function after administration of adipose-tissue-derived stromal vascular fraction in rat model of acute kidney injury induced by ischemia/reperfusion injury.

Acute kidney injury (AKI) induced by ischemia/reperfusion (I/R) injury is a major challenge in critical care medicine. The purpose of this study is to determine the therapeutic effects of the adipose-tissue-derived stromal vascular fraction (SVF) and the optimal route for SVF delivery in a rat model of AKI induced by I/R injury. Fifty male Sprague-Dawley rats were randomly divided into five groups (10 animals per group): sham, nephrectomy control, I/R injury control, renal arterial SVF infusion and subcapsular SVF injection. To induce AKI by I/R injury, the left renal artery was clamped with a nontraumatic vascular clamp for 40 min, and the right kidney was removed. Rats receiving renal arterial infusion of SVF had a significantly reduced increase in serum creatinine compared with the I/R injury control group at 4 days after I/R injury. The glomerular filtration rate of the renal arterial SVF infusion group was maintained at a level similar to that of the sham and nephrectomy control groups at 14 days after I/R injury. Masson's trichrome staining showed significantly less fibrosis in the renal arterial SVF infusion group compared with that in the I/R injury control group in the outer stripe (P < 0.001). TUNEL labeling showed significantly decreased apoptosis in both the renal arterial SVF infusion and subcapsular SVF injection groups compared with the I/R injury control group in the outer stripe (P < 0.001). Thus, renal function is effectively rescued from AKI induced by I/R injury through the renal arterial administration of SVF in a rat model.

Acute Kidney Injury After Radical Cystectomy for Bladder Cancer is Associated with Chronic Kidney Disease and Mortality.

PURPOSE: The aim of this study was to investigate the prevalence of acute kidney injury (AKI) after radical cystectomy, and evaluate its impact on chronic kidney disease (CKD) and mortality. METHODS: The medical records of 866 patients who underwent radical cystectomy for bladder cancer were reviewed. AKI was assessed within 7 days after surgery according to the Acute Kidney Injury Network criteria. The prevalence of AKI after surgery was examined, and the significance of AKI for CKD and mortality was analyzed. RESULTS: Of 866 patients, 269 (31.1 %) developed AKI in the first week after surgery. Of these, 231 (85.9 %) were at stage 1, 32 (11.9 %) at stage 2, and 6 (2.2 %) at stage 3. Of 722 patients with a preoperative Modification of Diet in Renal Disease estimated glomerular filtration rate (eGFR) of >60 ml/min/1.73 m(2), CKD developed in 23.0 % (118/513) of patients in the non-AKI group and 32.5 % (68/209) of patients in the AKI group. Independent factors predicting new-onset CKD were a preoperative eGFR (p < 0.001), age (p = 0.011), urinary tract complication (p < 0.001) and AKI (p = 0.015). In all, 297 patients died (191 in the non-AKI group and 106 in the AKI group). AKI also correlated significantly with overall survival (p = 0.001). CONCLUSIONS: AKI is not only commonly encountered after radical cystectomy but is also associated with higher CKD rates and mortality. There is a critical need for strategies to increase the identification of patients at risk of postoperative AKI, and to improve the management of patients, with an aim toward preventing AKI and improving the treatment of AKI once it occurs.

Bone marrow-derived mesenchymal stromal cell therapy in a rat model of cavernous nerve injury: Preclinical study for approval.

BACKGROUND AIMS: Although clinical studies using stem cells to treat erectile dysfunction have been performed or are ongoing, there is little consensus on the optimal protocol. We aimed to develop a protocol optimizing human bone marrow-derived mesenchymal stromal cell (hBMSC) therapy in a rat model of cavernous nerve injury. METHODS: We performed, in order, a dose-finding study, a toxicokinetic study of hBMSCs, and a study to determine the timing and number of cell injections. RESULTS: From the dose-finding study, 1 × 10(6) cells were selected as the dose per hBMSC injection. From the toxicokinetic study, 14 days was selected as the interval between repeat treatments. In the final study, the ratio of maximal intracavernous pressure to mean arterial pressure was significantly lower in the control group than in the sham group (23.4% vs. 55.1%, P <0.001). An immediate single injection of hBMSCs significantly improved erectile function compared with the control group (39.8%, P = 0.035), whereas a delayed single injection showed improvement with a marginal trend (38.1%, P = 0.079). All histomorphometric changes were significantly more improved in the immediate or delayed single injection groups than in the control group. Repeat treatments did not provide any benefit for the recovery of erectile function and histomorphometric changes. CONCLUSIONS: Intracavernous injection of 1 × 10(6) hBMSCs results in a recovery of penile erection and histomorphometric changes in a rat model of cavernous nerve injury, even when treatment was delayed until 4 weeks after cavernous nerve injury.

Subclassification of high-risk clinically organ-confined prostate cancer for early cancer-specific mortality after radical prostatectomy.

OBJECTIVE: High-risk clinically localized prostate cancer is seen in a highly heterogeneous population with a wide variation of clinical aggressiveness and a novel subclassification for the better prediction of clinical outcomes is needed. The aim of this study is to validate a modified D'Amico risk criteria for substratification of high-risk prostate cancer with regard to the prediction of biochemical recurrence, clinical progression-free survival or prostate cancer-specific mortality after radical prostatectomy. METHODS: We conducted a retrospective multicenter cohort study including 461 clinically organ-confined (cT1-2), D'Amico high-risk prostate cancer patients who underwent radical prostatectomy with pelvic lymph node dissection. The modified criteria subclassified D'Amico high-risk patients into high-risk (n = 189, single high-risk parameter and two low-risk parameters) and very high-risk (n = 272, at least one more intermediate or high-risk parameter in addition to the qualifying high-risk parameter) groups. Biochemical recurrence-free survival, clinical progression-free survival, prostate cancer-specific mortality and overall survival were analyzed. RESULTS: The very high-risk group, compared with high-risk group, had significantly poorer biochemical recurrence (5- and 10-year biochemical recurrence-free rates: 52.8 vs 73.9% and 42.1 vs 61.7%, respectively, P < 0.0001), clinical progression-free survival (5- and 10-year survivals: 91.8 vs 98.2% and 80.5 vs 98.2%, respectively, P = 0.0013) and prostate cancer-specific mortality (5- and 10-year mortalities: 2.5 vs 0.0% and 6.7 vs 0.0%, respectively, P = 0.0124). CONCLUSION: D'Amico high-risk patients can achieve very favorable outcomes unless they are classified as very high risk. Our novel subclassification method is very simple and useful for better patient counseling and decision-making in the pretreatment setting.

Comparison of Renal Function between Robot-Assisted and Open Partial Nephrectomy as Determined by Tc 99m-DTPA Renal Scintigraphy.

We compared postoperative renal function impairment between patients undergoing robot-assisted partial nephrectomy (RAPN) and those undergoing open partial nephrectomy (OPN) by using Tc-99m diethylenetriaminepentaacetic acid (DTPA) renal scintigraphy. Patients who underwent partial nephrectomy by a single surgeon between 2007 and 2013 were eligible and were matched by propensity score, based on age, tumor size, exophytic properties of tumor, and location relative to the polar lines. Of the 403 patients who underwent partial nephrectomy, 114 (28%) underwent RAPN and 289 (72%) underwent OPN. Mean follow-up duration was 35.2 months. Following propensity matching, there were no significant differences between the two groups in tumor exophytic properties (P = 0.818) or nephrometry score (P = 0.527). Renal ischemic time (24.4 minutes vs. 17.8 minutes, P < 0.001) was significantly longer in the RAPN group than in the OPN group, while the other characteristics were similar. Multivariate analysis showed that greater preoperative renal unit function (P = 0.011) and nephrometry score (P = 0.041) were independently correlated with a reduction in glomerular filtration rate. The operative method did not correlate with renal function impairment (P = 0.704). Postoperative renal function impairment was similar between patients who underwent OPN and those who underwent RAPN, despite RAPN having a longer ischemic time.

Renal Function is Associated with Nephrometry Score After Partial Nephrectomy: A Study Using Diethylene Triamine Penta-Acetic Acid (DTPA) Renal Scanning.

PURPOSE: The aim of this study was to evaluate the effect of renal tumor anatomical characteristics on renal function change after partial nephrectomy using the scoring systems and the glomerular filtration rate (GFR) estimated from diethylene triamine penta-acetic acid (DTPA) scans. METHODS: Patients who underwent DTPA renal scans before and after partial nephrectomy from January 2009 to December 2011 were identified retrospectively. The anatomical characteristics of renal tumors were standardized using the RENAL, PADUA and C-index scoring systems. Associations between scoring systems and change in GFRs were evaluated using a correlation coefficient. Predictors of GFR change and postoperative new-onset chronic kidney disease (CKD) after partial nephrectomy were assessed. RESULTS: A total of 185 patients with a mean tumor size of 2.6 cm (median 2.3, range 0.5-10) were identified. Mean ischemia time was 21.5 min. The last DTPA renal scan was performed at a mean follow-up duration of 23.3 months after surgery, and the mean decrease in GFR was 8.1 ml/min. By multivariable analysis, preoperative GFR (ß = -039; p < 0.001), RENAL complexity score (ß = -5.32; p < 0.001), and C-index complexity (ß = -5.19; p < 0.001) were independent predictors of decreased GFR on DTPA. Of 175 patients in whom preoperative estimated GFR (eGFR) was > 60 ml/min/1.73 m(2), CKD developed in 14 (8 %) patients after surgery. Independent factors predicting new-onset CKD were preoperative eGFR (odds ratio [OR] 0.91; p = 0.047), age (OR 1.13; p = 0.003), and diabetes (OR 5.10; p = 0.038). CONCLUSIONS: Although each scoring system describing the complexity of renal tumors correlates with change in GFR after partial nephrectomy, RENAL and C-index score were significantly predictive of GFR reduction.

Studies of singlet Rydberg series of LiH derived from Li(nl) + H(1s), with n ≤ 6 and l ≤ 4.

The 50 singlet states of LiH composed of 49 Rydberg states and one non-Rydberg ionic state derivable from Li(nl) + H(1s), with n ≤ 6 and l ≤ 4, are studied using the multi-reference configuration interaction method combined with the Stuttgart/Köln group's effective core potential/core polarization potential method. Basis functions that can yield energy levels up to the 6g orbital of Li have been developed, and they are used with a huge number of universal Kaufmann basis functions for Rydberg states. The systematics and regularities of the physical properties such as potential energies, quantum defects, permanent dipole moments, transition dipole moments, and nonadiabatic coupling matrix elements of the Rydberg series are studied. The behaviors of potential energy curves and quantum defect curves are explained using the Fermi approximation. The permanent dipole moments of the Rydberg series reveal that they are determined by the sizes of the Rydberg orbitals, which are proportional to n(2). Interesting mirror relationships of the dipole moments are observed between l-mixed Rydberg series, with the rule Δl = ±1, except for s-d mixing, which is also accompanied by n-mixing. The members of the l-mixed Rydberg series have dipole moments with opposite directions. The first derivatives of the dipole moment curves, which show the charge-transfer component, clearly show not only mirror relationships in terms of direction but also oscillations. The transition dipole moment matrix elements of the Rydberg series are determined by the small-r region, with two consequences. One is that the transition dipole moment matrix elements show n(-3/2) dependence. The other is that the magnitudes of the transition dipole moment matrix elements decrease rapidly as l increases.

CAD-CAM resin composites: Effective components for further development.

OBJECTIVE: This paper summarizes the effective components of computer-aided design and computer-aided manufacturing (CAD-CAM) resin composites that contribute to achieving greater mechanical properties and further development. METHODS: In silico multi-scale analysis, in silico nonlinear dynamic finite element analysis (FEA), and artificial intelligence (AI) were used to explore the effective components of CAD-CAM resin composites. The effects of the filler diameter and silane coupling ratio on the mechanical properties of CAD-CAM resin composites have been clarified through multi-scale analysis. The effects of the filler contents, and filler and monomer compositions have been investigated by AI algorithms. The fracture behavior of CAD-CAM composite crown was analyzed using in silico non-linear dynamic FEA. The longevity of CAD-CAM composite crown was assessed through step-stress accelerating life testing (SSALT). RESULTS: As the filler diameter decreases, there is an increase in elastic moduli and compressive strengths at the macroscale. At the nanoscale, a decrease in the filler diameter results in a decrease in the maximum value of the maximum principal strain. When the silane coupling ratio decreases, there is a decrease in the elastic modulus and compressive strength. According to the exhaustive search and feature importance analysis based on the AI algorithm, the combination of certain components was narrowed down to achieve a flexural strength of 269.5 MPa. The in silico non-linear FEA successfully detected the sign of the initial crack of the CAD-CAM composite molar crown. The SSALT revealed that CAD-CAM resin composite molar crowns containing nanofillers with a high fraction of resin matrix demonstrated great longevity. SIGNIFICANCE: This paper summarized the effective components of CAD-CAM resin composites for their further development. The integration of in vitro and in silico approaches will expedite the advancement of CAD-CAM resin composites, offering benefits such as time efficiency and reduction of material waste for researchers and manufacturers.

In silico nonlinear dynamic finite-element analysis for biaxial flexural strength testing of CAD/CAM materials.

PURPOSE: The aim of this study was to establish and assess the validity of in silico models of biaxial flexural strength (BFS) tests to reflect in vitro physical properties obtained from two commercially available computer-aided design/computer-aided manufacturing (CAD/CAM) ceramic blocks and one CAD/CAM resin composite block. METHODS: In vitro three-point bending and BFS tests were conducted for three CAD/CAM materials (n = 10): Katana Zirconia ST10 (raw material: super-translucent multilayered zirconia, ST10; Kuraray Noritake Dental, Niigata, Japan), Katana Zirconia HT10 (raw material: highly translucent multilayered zirconia, HT10; Kuraray Noritake Dental), and Katana Avencia N (AN; Kuraray Noritake Dental). Densities, flexural moduli, and fracture strains were obtained from the in vitro three-point bending test and used as an input for an in silico nonlinear finite element analysis. The maximum principal stress (MPS) distribution was obtained from an in silico BFS analysis. RESULTS: The elastic moduli of AN, HT10, and ST10 were 6.513, 40.039, and 32.600 GPa, respectively. The in silico fracture pattern of ST10 observed after the in silico evaluation was similar to the fracture pattern observed after the in vitro testing. The MPS was registered in the center of the tensile surface for all three specimens. The projections of the supporting balls were in the form of a triple asymmetry. CONCLUSIONS: The in silico approach established in this study provided an acceptable reflection of in vitro physical properties, and will be useful to assess biaxial flexural properties of CAD/CAM materials without wastage of materials.

Correlation between urine cytology results on the day after overnight continuous saline irrigation following transurethral resection of bladder tumor and bladder tumor recurrence.

PURPOSE: To investigate the relationship between urine cytology results after overnight continuous saline irrigation (OCSI) following transurethral resection of bladder tumor (TURBT) and bladder tumor recurrence in non-muscle invasive bladder cancer (NMIBC). MATERIALS AND METHODS: A retrospective study was conducted on patients diagnosed with NMIBC between 2016 and 2020 after undergoing TURBT at our hospital. All patients received OCSI following TURBT and had urine cytology test at postoperative 1 day. Urine cytology was classified into three groups: Negative, low-grade urothelial neoplasm (LGUN)+atypical urothelial cells (AUC), and suspicious for high-grade urothelial carcinoma (SHGUC)+high-grade urothelial carcinoma (HGUC). Recurrence-free survival (RFS) in each group was compared using the Kaplan-Meier method. Univariable and multivariable Cox regression analyses were performed to evaluate independent prognostic factors. RESULTS: A total of 172 patients were included in this study. Based on urine cytology group (after OCSI), RFS did not reach the median value in the Negative group. In the LGUN+AUC group, the median RFS was 615.00 days. In the SHGUC+HGUC group, the median RFS was 377.00 days. In survival analysis, the Negative group had a longer RFS than the SHGUC+HGUC group (p=0.013). However, Cox regression analysis showed that SHGUC+HGUC was not an independent prognostic factor for recurrence. CONCLUSIONS: Urine cytology results after OCSI following TURBT in NMIBC were associated with bladder tumor recurrence. Specifically, SHGUC or HGUC in urine cytology after OCSI showed earlier recurrence than negative cases. However, further research is needed to accurately determine whether it is an independent prognostic factor.

Clinical outcome and safety of holmium laser prostate enucleation after transrectal prostate biopsies for benign prostatic hyperplasia.

PURPOSE: This study aimed to assess the clinical outcome and safety of holmium laser enucleation of the prostate (HoLEP) following transrectal ultrasound-guided prostate biopsy (TR biopsy) in the treatment of benign prostate hyperplasia. MATERIALS AND METHODS: We retrospectively analyzed data from 556 patients who underwent HoLEP between 2014 and 2021. The patients were categorized into six groups: Group 1-A (n=45) underwent HoLEP within four months post TR biopsy. Group 1-B (n=94) underwent HoLEP more than four months post TR biopsy. Group 1-C (n=120) underwent HoLEP after a single TR biopsy. Group 1-D (n=19) underwent HoLEP after two or more TR biopsies. Group 1-total (n=139, group 1-A+group 1-B or group 1-C+group 1-D) underwent HoLEP post TR biopsy. Group 2 (control group, n=417) underwent HoLEP without prior TR biopsy. We examined perioperative parameters, safety, and functional outcomes. RESULTS: The age, body mass index, International Prostate Symptom Score (IPSS), uroflowmetry, and comorbid diseases between group 1-total and group 2 were comparable. However, group 1-total exhibited significantly elevated prostate-specific antigen levels and larger prostate volumes (p<0.01). Perioperative factors like enucleation time, enucleation weight, and catheterization duration were notably higher in group 1-total (p<0.01). All groups showed significant improvements in IPSS, postvoid residual urine, and maximum flow rate during the 1-year postoperative period (p<0.05). The rates of postoperative complications were similar between group 1-total and group 2. CONCLUSIONS: Enucleation time and catheterization duration were significantly longer in the TR biopsy group. However, postoperative complications were not significantly different between TR biopsy and non-TR biopsy groups.

The epidemiology of male lower urinary tract symptoms associated with benign prostatic hyperplasia: Results of 20 years of Korean community care and surveys.

PURPOSE: To investigate the prevalence of lower urinary tract symptoms/benign prostatic hyperplasia in a Korean population. MATERIALS AND METHODS: The Korean Prostate & Voiding Health Association provided free prostate-related community health care and conducted surveys in all regions of Korea from 2001 to 2022 with the cooperation of local government public health centers. A total of 72,068 males older than 50 were surveyed and analyzed. History taking, International Prostate Symptom Score (IPSS), transrectal ultrasonography, prostate-specific antigen (PSA) testing, uroflowmetry, and urine volume testing were performed. RESULTS: The mean prostate volumes in males in their 50s, 60s, 70s, and 80s or above were 24.7 g, 27.7 g, 31 g, and 33.7 g, respectively. The proportion of males with high PSA greater than 3 ng/mL was 3.8% among males in their 50s, 7.7% among males in their 60s, 13.1% among males in their 70s, and 17.9% among males 80 years of age or older. The mean IPSS total scores in males in their 50s, 60s, 70s, and 80s or above were 10.7, 12.7, 14.5, and 16, respectively. Severe symptoms were reported by 27.3% of males, whereas 51.7% reported moderate symptoms. The mean Qmax in males in their 50s, 60s, 70s, and 80s or above were 20 mL/s, 17.4 mL/s, 15.4 mL/s, and 13.8 mL/s, respectively. CONCLUSIONS: In this population-based study, mean prostate volume, IPSS, PSA, and Qmax were 30.6±15.1 g, 14.8±8.2, 1.9±4.7 ng/mL, and 15.6±6.5 mL/s, respectively. Aging was significantly associated with increased prostate volume, PSA levels, and IPSS scores, and with decreased Qmax and urine volume.

Quantitative evaluation of the degradation amount of the silane coupling layer of CAD/CAM resin composites by water absorption.

PURPOSE: Degradation of silane coupling layers by water ingress in computer-aided design/computer-aided manufacturing (CAD/CAM) of resin composites has been reported qualitatively. In this study, we quantitatively evaluated how water absorption of CAD/CAM resin composites affects the silane coupling layer by in vitro and in silico methods. METHODS: A Katana Avencia block (KAB) and an experimental matrix block composed of only a matrix resin were used to evaluate the effect of water immersion for seven days on the elastic modulus. X-ray photoelectron spectroscopy (XPS) with fluorine-labeling of the KAB was performed to evaluate the atomic percentage of F1s, which represents the hydrolysis amount by water immersion. In silico analysis of the three-dimensional model of the KAB was performed to determine the coupling ratios before and after water immersion. RESULTS: The elastic modulus of the KAB was 8.2 GPa before and 6.9 GPa after immersion in water. The atomic percentages of F1s in the after- and before-immersion groups were 14.31% and 11.52%, respectively, suggesting that hydrolysis of the silane coupling layer occurred during water immersion. From in silico analysis of the three-dimensional model of the KAB, the coupling ratio was predicted to be 78.2% before water immersion. After water immersion, the coupling ratio was predicted to be 68.4%. CONCLUSIONS: The in vitro and in silico approaches established in this study were able to predict the silane coupling ratios of CAD/CAM resin composites, and they showed that the silane coupling ratio decreased by water absorption.

Development of artificial intelligence model for supporting implant drilling protocol decision making.

Purpose This study aimed to develop an artificial intelligence (AI) model to support the determination of an appropriate implant drilling protocol using cone-beam computed tomography (CBCT) images.Methods Anonymized CBCT images were obtained from 60 patients. For each case, after implant placement, images of the bone regions at the implant site were extracted from 20 slices of CBCT images. Based on the actual drilling protocol, the images were classified into three categories: protocols A, B, and C. A total of 1,200 images were divided into training and validation datasets (n = 960, 80%) and a test dataset (n = 240, 20%). Another 240 images (80 images for each type) were extracted from the 60 cases as test data. An AI model based on LeNet-5 was developed using these data sets. The accuracy, sensitivity, precision, F-value, area under the curve (AUC) value, and receiver operating curve were calculated.Results The accuracy of the trained model is 93.8%. The sensitivity results for drilling protocols A, B, and C were 97.5%, 95.0%, and 85.0%, respectively, while those for protocols A, B, and C were 86.7%, 92.7%, and 100%, respectively, and the F values for protocols A, B, and C were 91.8%, 93.8%, and 91.9%, respectively. The AUC values for protocols A, B, and C are 98.6%, 98.6%, and 99.4%, respectively.Conclusions The AI model established in this study was effective in predicting drilling protocols from CBCT images before surgery, suggesting the possibility of developing a decision-making support system to promote primary stability.

Pelvic floor muscle exercise with or without duloxetine for postprostatectomy urinary incontinence: A retrospective single-center study.

This study aimed to evaluate the effectiveness of combined pelvic floor muscle exercise (PFME) and duloxetine treatment in the recovery from postprostatectomy urinary incontinence (PPUI). Participants were patients who underwent radical prostatectomy (RP) between 2018 and 2021 and who were able to attend follow-up appointments every 3 months for at least 12 months. Continence was defined as the use of ≤1 pad per day. PPUI was compared at each follow-up period by dividing the participants into the PFME group (PFME only after RP) and the PFME + DUL group (PFME and 30 mg duloxetine daily after RP). A total of 197 patients were included. No significant differences were observed in the baseline characteristics between the 2 groups. In the PFME group (n = 127), the PPUI was 77.17%, 27.56%, 17.32%, 12.60%, and 9.45% at 2 weeks, 3 months, 6 months, 9 months, and 12 months, respectively. In the PFME + DUL group (n = 70), the PPUI was 62.50%, 17.86%, 12.50%, 8.93%, and 5.36%, respectively, at the same follow-up period. At 2 weeks, the PFME + DUL group demonstrated a better incontinence rate than the PFME group (P = .019). However, no significant differences were found in the incontinence rates between the 2 groups at each follow-up period after 3 months. Compared to PFME monotherapy, the combination therapy of PFME and duloxetine has short-term effectiveness in improving PPUI, but it does not have a significant long-term impact. Therefore, for early recovery from PPUI, duloxetine should be administered for a short period during PFME.

Feasibility and safety of laparoscopic ablative renal surgery in infants: comparative study with children.

PURPOSE: We evaluated the feasibility and safety of laparoscopic ablative renal surgery in infants and small children 10 kg or less compared to children weighing more than 10 kg. MATERIALS AND METHODS: A total of 86 cases were performed by a single surgeon who had mastered the learning curve. Subjects consisted of 25 patients 12 months or younger or weighing 10 kg or less at surgery (group A) and 61 patients older than 12 months and weighing more than 10 kg at surgery (group B). Operative and convalescence parameters, and intraoperative and postoperative complications were compared between the groups. Binary logistic regression analysis was used to estimate the association of baseline characteristics with complications. RESULTS: All procedures were completed laparoscopically. There was no significant difference in operative and convalescence parameters, or overall intraoperative and postoperative complications between the 2 groups. Most intraoperative complications (10 of 13) were peritoneal tear during the retroperitoneal approach. Atelectasis was the most common postoperative complication (14 of 23 cases). Operative approach (retroperitoneal vs transperitoneal) was a significant determinant of intraoperative complications (OR 7.6, p = 0.005). Type of surgery (heminephrectomy or isthmectomy vs nephrectomy) was a significant determinant of postoperative complications (OR 5.2, p = 0.014). CONCLUSIONS: Laparoscopic ablative renal surgery is safe and feasible even in infants and small children. Intraoperative and postoperative complications are associated with approach and type of surgery, respectively.

Color matching ability of resin composites incorporating supra-nano spherical filler producing structural color.

OBJECTIVE: The aim of this study was to evaluate the optical properties of supra-nano spherical fillers with different diameters and the color matching ability of resin composites (RC) incorporating these fillers. METHODS: Two types of SiO2-ZrO2 nano fillers with different diameters (150nm and 260nm) were used. The size distribution of each filler was measured and filler morphology was observed. The colors and spectral reflection spectra were measured by a spectral reflectometer. Experimental RCs incorporating ϕ150-nm/ϕ260-nm filler (D150RC/D260RC) were prepared. For the base dentin part, disc specimens (Estelite Astelia: A1B, A2B, A3B, A3.5B, or A4B) were prepared with a cylindrical cavity. Estelite Astelia with NE shade was layered on top as the enamel layer. Disk specimens with different cavity depths were prepared using A3B shade. Experimental RC was used to fill the cavity, and spectral reflection spectrums were obtained and analyzed. Filtek Supreme Ultra (FSU) with A3B shade was used (n=10) as a control. RESULTS: Both ϕ150-nm and ϕ260-nm nano fillers showed uniform spherical shape and exhibited no aggregation. The maximum peaks of the spectral reflection spectra of the ϕ150-nm and ϕ260-nm nano fillers were 380nm and 580nm, producing structural colors close to blue and yellow, respectively. The spectral reflection spectrum of FSU had a broad peak at 540nm, and D150RC had a significant peak at 420nm. The D260RC specimen had a broad peak at 680nm. The peaks of D150RC and D260RC significantly decreased in accordance with the shift in base RC shade from A1B to A4B. There was no significant difference in the peak of the reflection spectral spectra among different cavity depths of D260RC. These results suggest that the experimental RC could reflect base RC colors via the matrix resin, and the amount of transmitted light from the base RC was not much different with cavity depth. SIGNIFICANCE: D260RC producing structural color demonstrated a broad spectrum and reduction in brightness and chromatic value by adapting to surrounding restorative materials, suggesting its ability to enhance the chameleon (blending) effects to improve color matching. D260RC showed better color matching ability than resin composite containing uniformly sized ϕ150-nm SiO2-ZrO2 supra-nano spherical filler.

Survival of implant-supported resin-matrix ceramic crowns: In silico and fatigue analyses.

OBJECTIVE: To evaluate the fatigue survival, failure mode, and maximum principal stress (MP Stress) and strain (MP Strain) of resin-matrix ceramic systems used for implant-supported crowns. METHODS: Identical molar crowns were milled using four resin-matrix ceramics (n = 21/material): (i) Shofu Hard, (ii) Cerasmart (iii) Enamic, and (iv) Shofu HC. Crowns were cemented on the abutments, and the assembly underwent step-stress accelerated-life testing. Use level probability Weibull curves at 300 N were plotted and the reliability at 300, 500 and 800 N was calculated for a mission of 50,000 cycles. Fractographic analysis was performed using stereomicroscope and scanning electron microscope. MP Stress and MP Strain were determined by finite element analysis. RESULTS: While fatigue dictated failures for Cerasmart (ß > 1), material strength controlled Shofu Hard, Enamic, and Shofu HC failures (ß < 1). Shofu HC presented lower reliability at 300 N (79%) and 500 N (59%) than other systems (>90%), statistically different at 500 N. Enamic (57%) exhibited a significant reduction in the probability of survival at 800 N, significantly lower than Shofu Hard and Cerasmart; however, higher than Shofu HC (12%). Shofu Hard and Cerasmart (>93%) demonstrated no significant difference for any calculated mission (300-800 N). Failure mode predominantly involved resin-matrix ceramic fracture originated from occlusal cracks, corroborating with the MP Stress and Strain location, propagating through the proximal and cervical margins. SIGNIFICANCE: All resin-matrix ceramics crowns demonstrated high probability of survival in a physiological molar load, whereas Shofu Hard and Cerasmart outperformed Enamic and Shofu HC at higher loads. Material fracture comprised the main failure mode.