Modulation of SIRT3 expression through CDK4/6 enhances the anti-cancer effect of sorafenib in hepatocellular carcinoma cells.

BACKGROUND: Hepatocellular carcinoma (HCC) is the leading cause of cancer-related deaths worldwide. The only drug currently approved for clinical use in the treatment of advanced HCC is sorafenib. However, many patients with HCC show reduced sensitivity to sorafenib during treatment. SIRT3, a member of the mammalian sirtuin family, is a tumor suppressor in certain tumor types. However, only few studies have investigated the effects of SIRT3 on tumor prognosis and sorafenib sensitivity in patients with HCC. Here, we aimed to investigate the correlation between SIRT3 expression and glucose metabolism and proliferation in HCC and discover effective compounds that increase endogenous SIRT3 modulation effect of sorafenib. METHODS: To determine the correlation between SIRT3 and glucose related proteins, immunostaining was performed with liver cancer tissue using various antibodies. To investigate whether the expression of SIRT3 in HCC is related to the resistance to sorafenib, we treated sorafenib after the modulation of SIRT3 levels in HCC cell lines (overexpression in Huh7, knockdown in HepG2). We also employed PD0332991 to modulate the SIRT3 expression in HCC cell and conducted functional assays. RESULTS: SIRT3 expression was downregulated in high glycolytic and proliferative HCC cells of human patients, xenograft model and HCC cell lines. Moreover, SIRT3 expression was downregulated after sorafenib treatment, resulting in reduced drug sensitivity in HCC cell lines. To enhance the anti-tumor effect of sorafenib, we employed PD0332991 (CDK4/6-Rb inhibitor) based on the correlation between SIRT3 and phosphorylated retinoblastoma protein in HCC. Notably, combined treatment with sorafenib and PD0332991 showed an enhancement of the anti-tumor effect in HCC cells. CONCLUSIONS: Our data suggest that the modulation of SIRT3 by CDK4/6 inhibition might be useful for HCC therapy together with sorafenib, which, unfortunately, has limited efficacy and whose use is often associated with drug resistance.

A zero-thermal-quenching phosphor.

Phosphor-converted white light-emitting diodes (pc-WLEDs) are efficient light sources used in lighting, high-tech displays, and electronic devices. One of the most significant challenges of pc-WLEDs is the thermal quenching, in which the phosphor suffers from emission loss with increasing temperature during high-power LED operation. Here, we report a blue-emitting Na3-2xSc2(PO4)3:xEu2+ phosphor (λem = 453 nm) that does not exhibit thermal quenching even up to 200 °C. This phenomenon of zero thermal quenching originates from the ability of the phosphor to compensate the emission losses and therefore sustain the luminescence with increasing temperature. The findings are explained by polymorphic modification and possible energy transfer from electron-hole pairs at the thermally activated defect levels to the Eu2+ 5d-band with increasing temperature. Our results could initiate the exploration of phosphors with zero thermal quenching for high-power LED applications.

Synthesis of Nanoscale Fully Stabilized Zirconia Powders by Urea Hydrolysis, Sintering and Electrical Characterization.

Active nanoscale powders of cubic phase zirconia stabilized with yttria, gadolinia, and scandia were successfully prepared by urea hydrolysis. Synthetic cubic zirconia powders had homogeneous, nanoscale, and less-agglomeration characteristics. Dense pellets of grain size about 0.4 µm exhibited grain boundary blocking resistance compared to the high frequency bulk resistance. Gadolinium doped system exhibited highest ionic resistivity. Yttria stabilized zirconia by urea hydrolysis in this work showed smaller ionic resistivity than the sample prepared from the commercial powder.

A physicochemical mechanism of chemical gas sensors using an AC analysis.

Electrical modeling of the chemical gas sensors was successfully applied to TiO2 nanofiber gas sensors by developing an equivalent circuit model where the junction capacitance as well as the resistance can be separated from the comparable stray capacitance. The Schottky junction impedance exhibited a characteristic skewed arc described by a Cole-Davidson function, and the variation of the fit and derived parameters with temperature, bias, and NO2 gas concentration indicated definitely a physicochemical sensing mechanism based on the Pt|TiO2 Schottky junctions against the conventional supposition of the enhanced sensitivity in nanostructured gas sensors with high grain boundary/surface area. Analysis on a model Pt|TiO2|Pt structure also confirmed the characteristic impedance response of TiO2 nanofiber sensors.

Rapid Synthesis of Ultrathin Ni:FeOOH with In Situ-Induced Oxygen Vacancies for Enhanced Water Oxidation Activity and Stability of BiVO4 Photoanodes.

The coupling of oxygen evolution reaction (OER) catalysts with photoanodes is a promising strategy for enhancing the photoelectrochemical (PEC) performance by passivating photoanode's surface defect states and facilitating charge transfer at the photoanode/electrolyte interface. However, a serious interface recombination issue caused by poor interface and OER catalysts coating quality often limits further performance improvement of photoanodes. Herein, a rapid Fenton-like reaction method is demonstrated to produce ultrathin amorphous Ni:FeOOH catalysts with in situ-induced oxygen vacancies (Vo) to improve the water oxidation activity and stability of BiVO4 photoanodes. The combined physical characterizations, PEC studies, and density functional theory calculations revealed that the reductive environment in a Fenton-like reaction in situ produces abundant Vo in Ni:FeOOH catalysts, which significantly improves charge separation and charge transfer efficiency of BiVO4 while also offering abundant active sites and a reduced energy barrier for OER. As a result, Ni:FeOOH-Vo catalysts yielded a more than 2-fold increased photocurrent density in the BiVO4 photoanode (from 1.54 to 4.15 mA cm-2 at 1.23 VRHE), accompanied by high stability for 5 h. This work not only highlights the significance of abundant Vo in catalysts but also provides new insights into the rational design and fabrication of efficient and stable solar water-splitting systems.

Improved kinetics of LiNi(1/3)Mn(1/3)Co(1/3)O2 cathode material through reduced graphene oxide networks.

An electronically conducting 3D network of reduced graphene oxide (RGO) was introduced into LiNi(1/3)Mn(1/3)Co(1/3)O(2) (LNMC) cathode material in a special nano/micro hierarchical structure. The rate test and cycling measurement showed that the hierarchical networks remarkably improve the high rate performance of LNMC electrode for lithium-ion batteries. The effect of RGO conducting networks on kinetic property was investigated by electrochemical impedance spectroscopy (EIS) and potentiostatic intermittent titration (PITT). The EIS results reveal that the RGO network greatly decreases the resistance of lithium batteries, especially the charge transfer resistance which can be attributed to the significantly improved conducting networks. The enhancement of apparent diffusion coefficient by the RGO conducting networks is shown by PITT. The power performance was found to be limited by the electrical conduction in the two-phase region, which can be greatly facilitated by the hierarchical RGO network together with carbon black. The as-obtained LNMC/RGO cathode exhibits an outstanding electrochemical property supporting the design idea of electronically conducting 3D networks for the high-energy and high-power lithium-ion batteries.

Data on the effect of particle size, porosity and discharging rate on the performance of lithium-ion battery with NMC 622 cathode through numerical analysis.

The data presented in this article are related to the computed results reported in the article entitled "A modeling approach to study the performance of Ni-rich layered oxide cathode for lithium-ion battery" [1]. The lithium-ion battery (LIB) employed in the simulation is made up of a LiNi0.6Mn0.2Co0.2O2 (NMC 622) cathode and lithium metal foil anode. The numerical simulations were carried out using COMSOL Multiphysics 5.4 software which is based on the finite element (FE) method. The data presented in this manuscript shows how varying particle size and porosity affect the performance of the battery as the discharging rate is varied. Four different particle sizes and six different porosities were varied for the purpose of understanding the above behavior. The data presented can be used to further the analysis reported in the accompanying manuscript and aid in design of other cathode materials for LIB and other battery systems. It can also be used to compare some measured results for validation purposes. A comprehensive analysis of the data is found in [1].

Microscopic evidence of a new 9R-AgI polytype heterostructure.

The extraordinary high ionic conductivity and the phase transition with large thermal hysteresis of AgI:Al2O3 nanocomposites can be ascribed to the presence of unusual polytype 7H and 9R modification of AgI as mesoscopic heterostructures. In addition to the 7H AgI phase in the composites previously identified by a Rietveld analysis of X-ray diffraction, a new 9R AgI polytype with a characteristic three-fold contrast was directly evidenced by high resolution transmission electron microscopy. The epitaxial intergrowth of various polytypes was also microscopically evidenced which is in accordance with the Rietveld analysis.

Modified parylene-N films as chemical microenvironments for differentiation and spheroid formation of osteoblast cells.

In this work, the influence of parylene N film on the spheroid formation of osteoblast-like cells (MG-63) was determined and compared with that of high-hydrophilicity microenvironments, such as hydrophilic culture matrix and ultraviolet-treated parylene N film. To elucidate the change in cell properties due to the microenvironment of parylene N film, global gene expression profiles of MG-63 cells on parylene N film were analyzed. We confirmed the upregulated expression of osteoblast differentiation- and proliferation-related genes, such as Runx2, ALPL, and BGLAP and MKi67 and PCNA, respectively, using the real-time polymerase chain reaction. In addition, the differentiation and proliferation of osteoblast cells cultured on parylene N film were validated using immunostaining. Finally, the formation of spheroids and regulation of differentiation in human mesenchymal stem cells (MSCs) on parylene N film was demonstrated. The results of this study confirm that the microenvironment with the controlled hydrophobic property of parylene N film could effectively trigger the bone differentiation and maintains the proliferation of MSCs, similar to MG-63 cells without any scaffold structures or physical treatments.

Mechanistic Understanding of Improved Performance of Graphene Cathode Inverted Organic Light-Emitting Diodes by Photoemission and Impedance Spectroscopy.

Modification of multilayer graphene films was investigated for a cathode of organic light-emitting diodes (OLEDs). By doping the graphene/electron transport layer (ETL) interface with Li, the driving voltage of the OLED was reduced dramatically from 24.5 to 3.2 V at a luminance of 1000 cd/m2. The external quantum efficiency was also enhanced from 3.4 to 12.9%. Surface analyses showed that the Li doping significantly lowers the lowest unoccupied molecular orbital level of the ETL, thereby reducing the electron injection barrier and facilitating electron injection from the cathode. Impedance spectroscopy analyses performed on electron-only devices (EODs) revealed the existence of distributed trap states with a well-defined activation energy, which is successfully described by the Havriliak-Negami capacitance functions and the temperature-independent frequency dispersion parameters. In particular, the graphene EOD showed a unique high-frequency feature as compared to the indium tin oxide one, which could be explained by an additional parallel capacitance element.

The Effect of Niobium Doping on the Electrical Properties of 0.4(Bi0.5K0.5)TiO3-0.6BiFeO3 Lead-Free Piezoelectric Ceramics.

Ceramics in the system (Bi0.5K0.5)TiO3-BiFeO3 have good electromechanical properties and temperature stability. However, the high conductivity inherent in BiFeO3-based ceramics complicates measurement of the ferroelectric properties. In the present work, doping with niobium (Nb) is carried out to reduce the conductivity of (Bi0.5K0.5)TiO3-BiFeO3. Powders of composition 0.4(K0.5Bi0.5)Ti1-xNbxO3-0.6BiFe1-xNbxO3 (x = 0, 0.01 and 0.03) are prepared by the mixed oxide method and sintered at 1050 °C for 1 h. The effect of Nb doping on the structure is examined by X-ray diffraction. The microstructure is examined by scanning electron microscopy. The variation in relative permittivity with temperature is measured using an impedance analyzer. Ferroelectric properties are measured at room temperature using a Sawyer Tower circuit. Piezoelectric properties are measured using a d33 meter and a contact type displacement sensor. All the samples have high density, a rhombohedral unit cell and equiaxed, micron-sized grains. All the samples show relaxor-like behavior. Nb doping causes a reduction in conductivity by one to two orders of magnitude at 200 °C. The samples have narrow P-E loops reminiscent of a linear dielectric. The samples all possess bipolar butterfly S-E loops characteristic of a classic ferroelectric material. Nb doping causes a decrease in d33 and Smax/Emax.

Superior hybrid cathode material containing lithium-excess layered material and graphene for lithium-ion batteries.

Graphene-wrapped lithium-excess layered hybrid materials (Li(2)MnO(3)·LiMO(2), M = Mn, Ni, Co, hereafter abbreviated as LMNCO) have been synthesized and investigated as cathode materials for lithium-ion batteries. Cyclic voltammetry measurement shows a significant reduction of the reaction overpotential in benefit of the graphene conducting framework. The electrochemical impedance spectroscopy results reveal that the graphene can greatly reduce the cell resistance, especially the charge transfer resistance. Our investigation demonstrates that the graphene conducting framework can efficiently alleviate the polarization of pristine LMNCO material leading to an outstanding enhancement in cell performance and cycling stability. The superior electrochemical properties support the fine hybrid structure design by enwrapping active materials in graphene nanosheets for high-capacity and high-rate cathode materials.

Generalized equivalent circuits for mixed conductors: silver sulfide as a model system.

ABSTRACT: The generalized equivalent circuit for Hebb-Wagner polarization in the frequency domain proposed by Jamnik and Maier (J Electrochem Soc 146:4183, 1999) includes the space-charge polarization that was previously neglected. In the present work, using a self-coded Fortran program, the completely generalized equivalent circuit is successfully applied to a mixed conducting silver sulfide with an AgI electrode that suppresses the electronic flow. A whole set of fit parameters, such as geometric capacitance, partial conductivities, chemical capacitance or diffusivity, and the blocking and shunting characteristics of electrodes are independently but self-consistently obtained over a range of silver activities, as controlled by a galvanic cell. The interfacial capacitance was found to be much larger than the diffuse space-charge double-layer capacitance and was thus ascribed to the adsorption capacitance at the core of the interface, which should be connected in parallel with the space-charge double-layer polarization. Two simplified equivalent circuits were shown to be good approximations for the spectra at the extreme low and high silver activity, respectively.

Electrical conductivity-defect structure correlation of variable-valence and fixed-valence acceptor-doped BaTiO(3) in quenched state.

Insulation resistance degradation of dielectric BaTiO(3) is expected to be closely correlated to its defect structure frozen in from elevated processing temperatures. For BaTiO(3), respectively doped with variable-valence (Mn(Ti)) and fixed-valence acceptors (Al(Ti)), their defect structures were frozen in by quenching at different equilibrium oxygen activities in the range of -18 < log a(O(2))< or = 0 at 1000 and 900 degrees C, respectively, and their electrical conductivities were measured against temperature in the range of 200 < or =T/K < or = 494 by impedance spectroscopy. Frozen-in defect structures were calculated and compared with the conductivity as measured in the quenched state. A close correlation has been confirmed between the bulk conductivity as measured in the quenched state and the frozen-in defect structure as calculated. The effects of variable- and fixed-valence acceptor impurities on the defect structure and electrical conductivity in the quenched state are highlighted in the light of hole trapping, and the charge transport behavior in the quenched state is discussed.

Formation of protonic defects in perovskite-type oxides with redox-active acceptors: case study on Fe-doped SrTiO(3).

The thermodynamics of water incorporation into Fe-doped SrTiO(3) was investigated by thermogravimetric measurements. Changes in valence states of redox-active dopant ions (Fe(3+)/Fe(4+)) with water vapor pressure were taken into account in the defect chemical analysis. The proton solubility was significantly enhanced by the presence of the redox centers. The hydration enthalpies and entropies were -60 kJ mol(-1) and -122 J mol(-1) K(-1). The defect chemical model was applied to describe the water vapor dependence of the electrical conductivity in mixed ionic and electronic conducting Fe-doped SrTiO(3) single crystals.