Biological performance of a bioabsorbable magnesium-magnesium phosphate cement interbody fusion cage in a porcine lumbar interbody fusion model: a feasibility study.

PURPOSE: The aim of the study was to evaluate the feasibility of a bioabsorbable cage consisting of magnesium and magnesium phosphate cement (MPC) in a porcine lumbar interbody fusion model. METHODS: Twelve male Ba-Ma mini pigs underwent lumbar discectomy and fusion with an Mg-MPC cage or a PEEK cage at the L3/L4 and L4/L5 level. Computed tomography (CT) scans were made to evaluate the distractive property by comparing average disc space height (DSH) before and at 6, 12, and 24 weeks after the operation. After the lumbar spines were harvested at 6 or 24 weeks after the operation, micro-CT examination was conducted to analyze the fusion rate, and stiffness of motion segments was investigated through mechanical tests. A histological study was performed to evaluate the tissue type, inflammation, and osteolysis in the intervertebral space. RESULTS: CT scans showed no significant difference between the two groups in average DSH at each time point. Micro-CT scans revealed an equal fusion rate in both groups (0% at 6 weeks, 83.3% at 24 weeks). Both groups showed time-dependent increases in stability, the Mg-MPC cages achieved an inferior stiffness at 6 weeks and a comparable stiffness at 24 weeks. Histologic evaluation showed the presence of newly formed bone in both groups. However, empty spaces were observed at the interface or around the Mg-MPC cages. CONCLUSION: Compared with the PEEK cages, the Mg-MPC cages achieved comparable distraction, fusion rate, and spinal stability at 24 weeks after the operation. However, due to inferior stiffness at the early stage and fast degradation, further modification of material composition and design are necessary.

The clinical efficacy of Medial Sustain Nail(MSN) and Proximal femoral nail anti-rotation(PFNA) for fixation of medial comminuted trochanteric fractures: a prospective randomized controlled trial.

PURPOS: To evaluate the clinical efficacy of the Medial Sustain Nail (MSN) for medial comminuted trochanteric fractures fixation in comparison to Proximal Femoral Nail Antirotation (PFNA) through a clinical study. METHODS: A non-inferiority randomized controlled trial was conducted at a single centre between July 2019 and July 2020. Fifty patients diagnosed comminuted trochanteric fractures were randomly assigned to either the MSN group (n = 25) or the PFNA group (n = 25). A total of forty-three patients were included in the final study analysis. The primary outcome measure was Short Form 36 health surgery physical component summary (SF-36 PCS) score. Secondary outcomes included the Oxford Hip Scores (OHS), weight bearing, complication relate to implant and so on. This study was not blined to surgeons, but to patients and data analysts. RESULTS: The MSN demonstrated significantly better functional outcomes as measured by SF-36 PCS and OHS at six months postoperative compared to PFNA (p < 0.05). Union of fractures in the MSN group reached 90.9% at three months after surgery, whereas the PFNA group achieved a union rate of 57.1% (p < 0.05). Furthermore, weight-bearing time of MSN group was earlier than PFNA group (p < 0.05). Additionally, complications related to implant usage were more prevalent in the PFNA group (33.3%) compared to the MSN group (4.5%) (p < 0.05). CONCLUSION: MSN exhibited superior quality of life outcomes compared to PFNA at six months postoperative. This indicates that MSN effectively reconstructs medial femoral support in patients with comminuted trochanteric fractures, which facilitates early weight-bearing and accelerates the recovery process. TRIAL REGISTRATION: Trial registration number: NCT01437176, Date of the trial registration:2011-9-1, Date of commencement of the study:2011-9, Date of enrolment/recruitment of the study subjects:2019-7.

Biomechanical effect of proximal multifidus injury on adjacent segments during posterior lumbar interbody fusion: a finite element study.

BACKGROUND: Adjacent segment degeneration (ASD) is a common complication of lumbar interbody fusion; the paraspinal muscles significantly maintain spinal biomechanical stability. This study aims to investigate the biomechanical effects of proximal multifidus injury on adjacent segments during posterior lumbar interbody fusion (PLIF). METHODS: Data from a lumbosacral vertebral computed tomography scan of a healthy adult male volunteer were used to establish a normal lumbosacral vertebral finite element model and load the muscle force of the multifidus. A normal model, an L4/5 PLIF model (PFM) based on a preserved proximal multifidus, a total laminectomy PLIF model (TLPFM), and a hemi-laminectomy PLIF model based on a severed proximal multifidus were established, respectively. The range of motion (ROM) and maximum von Mises stress of the upper and lower adjacent segments were analyzed along with the total work of the multifidus muscle force. RESULTS: This model verified that the ROMs of all segments with four degrees of freedom were similar to those obtained in previous research data, which validated the model. PLIF resulted in an increased ROM and maximum von Mises stress in the upper and lower adjacent segments. The ROM and maximum von Mises stress in the TLPFM were most evident in the upper adjacent segment, except for lateral bending. The ROM of the lower adjacent segment increased most significantly in the PFM in flexion and extension and increased most significantly in the TLPFM in lateral bending and axial rotation, whereas the maximum von Mises stress of the lower adjacent segment increased the most in the TLPFM, except in flexion. The muscle force and work of the multifidus were the greatest in the TLPFM. CONCLUSIONS: PLIF increased the ROM and maximum von Mises stress in adjacent cranial segments. The preservation of the proximal multifidus muscle contributes to the maintenance of the physiological mechanical behavior of adjacent segments, thus preventing the occurrence and development of ASD.

The landscape of miRNA editing in animals and its impact on miRNA biogenesis and targeting.

Adenosine-to-inosine (A-to-I) RNA editing regulates miRNA biogenesis and function. To date, fewer than 160 miRNA editing sites have been identified. Here, we present a quantitative atlas of miRNA A-to-I editing through the profiling of 201 pri-miRNA samples and 4694 mature miRNA samples in human, mouse, and Drosophila. We identified 4162 sites present in ∼80% of the pri-miRNAs and 574 sites in mature miRNAs. miRNA editing is prevalent in many tissue types in human. However, high-level editing is mostly found in neuronal tissues in mouse and Drosophila Interestingly, the edited miRNAs in neuronal and non-neuronal tissues in human gain two distinct sets of new targets, which are significantly associated with cognitive and organ developmental functions, respectively. Furthermore, we reveal that miRNA editing profoundly affects asymmetric strand selection. Altogether, these data provide insight into the impact of RNA editing on miRNA biology and suggest that miRNA editing has recently gained non-neuronal functions in human.

Comparative study of anatomical locking plate and reconstruction plate in treating acetabular fractures.

PURPOSE: This study aims to compare the effectiveness of anatomic locking plate and reconstruction plate used in treating acetabular fractures. METHODS: From January 2009 to January 2016, patients with acetabular fractures were included in this retrospective study. We grouped the patients into two groups based on the internal fixation: reconstruction plate group (RPG) and anatomic locking plate group (ALPG). The operation time, blood loss, intra-operative screw penetration, and plate breakage were compared between the two groups. The intra-operative fluoroscopic images were used to evaluate the fixation location. The quality of reduction and radiological grading were assessed according to the criteria developed by Matta. The clinical assessment was based on the Merle d'Aubigne-Postel score. RESULTS: Eighty-three patients were included in this study and were followed up for an average of 35 months (range, 25 to 42 months). Thirty-five patients were treated with the anatomical locking plate, and 48 patients were treated with the reconstruction plate. The mean surgical time was significantly shorter (P < 0.0001) in ALPG patients than in RPG patients, and the intra-operative blood loss was significantly lower (P = 0.008). The rates of intra-operative screw penetration or plate breakage in the ALPG (0/35) are significantly lower than that in the RPG (7/48) (P = 0.018). Post-operative Matta score (P = 0.905), Merle d'Aubigne-Postel score (P = 0.957), and overall complication rates (P = 0.391) were not significantly different among the groups. CONCLUSION: Patients treated by anatomical locking plate had shorter operation time, less bleeding, and lower rate screw perforation compared to patients treated by reconstruction plate. Anatomical locking plate is a better choice for acetabulum fractures, especially complicated fractures.

Unilateral curved versus bipedicular vertebroplasty in the treatment of osteoporotic vertebral compression fractures.

BACKGROUND: Vertebral compression fracture is one of the most common complications of osteoporosis. In this study an unilateral curved vertebroplasty device was developed, and the safety, effectiveness, and surgical parameters of curved vertebroplasty (CVP) in the treatment of painful osteoporotic vertebral compression fractures was investigated and compared with traditional bipedicular vertebroplasty (BVP). METHODS: We investigated 104 vertebral augmentation procedures performed over 36 months. CVP and BVP procedures were compared for baseline clinical variables, pain relief (Visual Analog Scale, VAS), disability improvement (Oswestry Disability Index, ODI), operation time, number of fluoroscopic images, volume of cement per level, and cement leakage rate for each level treated. Complications and refracture incidence were also recorded in the two groups. RESULTS: The VAS and ODI in both group had no significant difference preoperative (P > 0.05), and a significant postoperative improvement in the VAS scores and ODI was found in both group (P < 0.001). However, the CVP group had significantly lower operation time, number of fluoroscopic images, and cement leakage rate per level than the BVP group (P < 0.05); however, the volumes of cement per level were similar in the two groups (P > 0.05). Neither group had any serious complications. Five and two patients in the BVP group developed refractures at non-adjacent and adjacent levels, respectively, with one patient developing refractures twice; however, none of the patients in the CVP group developed refractures at any level. CONCLUSIONS: Our findings revealed that both CVP and BVP were safe and effective treatments for osteoporotic vertebral compression fractures, and CVP entails a shorter operation time, less exposure to fluoroscopy, and lower rate of cement leakage.

Comparison of Arthroscopic and Conservative Treatments for Knee Osteoarthritis: A 5-Year Retrospective Comparative Study.

PURPOSE: To compare the effectiveness of arthroscopic and conservative treatments in patients with knee osteoarthritis (KOA) with 5 years of follow-up. METHODS: Patients diagnosed with Kellgren-Lawrence grade 2 to 4 KOA who underwent arthroscopic or conservative treatment from May 2005 to May 2012 were included. The Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) total score was collected 1, 2, 3, 4, and 5 years after the initial treatment, and the number of patients who underwent total knee arthroplasty (TKA) at every time point was recorded. RESULTS: Three hundred eighty-two patients (168 in the conservative group and 214 in the arthroscopy group) were included. Five years after the initial treatment, 32 of the 214 patients who underwent arthroscopy (15.0%) compared with 30 of the 168 patients in the conservative treatment group (17.9%) ultimately underwent TKA, with no statistically significant difference between groups (P = .20). The WOMAC score was significantly lower in the arthroscopy group than in the conservative group at year 1 (24.33 ± 21.56 vs 36.43 ± 16.22, respectively) and year 2 (26.31 ± 17.84 vs 35.41 ± 19.21, respectively). There were no significant between-group differences at years 3, 4, and 5. CONCLUSIONS: Compared with conservative treatment, arthroscopy provided no benefit in decreasing or delaying arthroplasty surgery. However, arthroscopy had a greater ability to relieve symptoms at 1 and 2 years. Our results suggest that arthroscopy can relieve symptoms up to 2 years without elevating the risk of arthroplasty. LEVEL OF EVIDENCE: Level III, retrospective comparative study.

Effect of negative pressure on growth, secretion and biofilm formation of Staphylococcus aureus.

Negative pressure wound therapy (NPWT) has gained popularity in the management of contaminated wounds as an effective physical therapy, although its influence on the bacteria in the wounds remains unclear. In this study, we attempted to explore the effect of negative pressure conditions on Staphylococcus aureus, the most frequently isolated pathogen during wound infection. S. aureus was cultured in Luria-Bertani medium at subatmospheric pressure of -125 mmHg for 24 h, with the bacteria grown at ambient pressure as the control. The application of negative pressure was found to slow down the growth rate and inhibit biofilm development of S. aureus, which was confirmed by static biofilm assays. Furthermore, decreases in the total amount of virulence factors and biofilm components were observed, including α-hemolysin, extracellular adherence protein, polysaccharide intercellular adhesin and extracellular DNA. With quantitative RT-PCR analysis, we also revealed a significant inhibition in the transcription of virulence and regulatory genes related to wound infections and bacterial biofilms. Together, these findings indicated that negative pressure could inhibit the growth, virulence and biofilm formation of S. aureus. A topical subatmospheric pressure condition, such as NPWT, may be a potential antivirulence and antibiofilm strategy in the field of wound care.

[Diagnosis and treatment of fracture delayed union and nonunion].

Fracture nonunion is the cessation of a normal reparative process of fracture healing. With an incidence of 2.5%-4.4%, it is one of difficult problem for orthopedics surgeons. Definition, classification, treatment and causes of fracture nonunion are reviewed in this article. The therapeutic principles and methods are introduced systematically combined with causes of fracture nonunion.

Inhibiting the "isolated island" effect in simulated bone defect repair using a hollow structural scaffold design.

The treatment of bone tissue defects remains a complicated clinical challenge. Recently, the bone tissue engineering (BTE) technology has become an important therapeutic approach for bone defect repair. Researchers have improved the scaffolds, cells, and bioactive factors used in BTE through various existing bone repair material preparation strategies. However, due to insufficient vascularization, inadequate degradation, and fibrous wrapping, most BTE scaffolds impede new bone ingrowth and the reconstruction of grid-like connections in the middle and late stages of bone repair. These non-degradable scaffolds become isolated and disordered like independent "isolated islands", which leads to the failure of osteogenesis. Consequently, we hypothesized that the "island effect" prevents successful bone repair. Accordingly, we proposed a new concept of scaffold modification-osteogenesis requires a bone temporary shelter (also referred to as the empty shell osteogenesis concept). Based on this concept, we consider that designing hollow structural scaffolds is the key to mitigating the "isolated island" effect and enabling optimal bone regeneration and reconstruction.

Cutting-Edge Biomaterials in Intervertebral Disc Degeneration Tissue Engineering.

Intervertebral disc degeneration (IVDD) stands as the foremost contributor to low back pain (LBP), imposing a substantial weight on the world economy. Traditional treatment modalities encompass both conservative approaches and surgical interventions; however, the former falls short in halting IVDD progression, while the latter carries inherent risks. Hence, the quest for an efficacious method to reverse IVDD onset is paramount. Biomaterial delivery systems, exemplified by hydrogels, microspheres, and microneedles, renowned for their exceptional biocompatibility, biodegradability, biological efficacy, and mechanical attributes, have found widespread application in bone, cartilage, and various tissue engineering endeavors. Consequently, IVD tissue engineering has emerged as a burgeoning field of interest. This paper succinctly introduces the intervertebral disc (IVD) structure and the pathophysiology of IVDD, meticulously classifies biomaterials for IVD repair, and reviews recent advances in the field. Particularly, the strengths and weaknesses of biomaterials in IVD tissue engineering are emphasized, and potential avenues for future research are suggested.

Clinical efficacy and complications of MIS-TLIF and TLIF in the treatment of upper lumbar disc herniation: a comparative study.

BACKGROUND: The optimal treatment modality for upper lumbar disc herniation remains unclear. Herein, we compared the clinical efficacy and application value of minimally invasive transforaminal lumbar interbody fusion (MIS-TLIF) and transforaminal lumbar interbody fusion (TLIF) for upper lumbar disc herniation. We aimed to provide new evidence to guide surgical decisions for treating this condition. METHODS: We retrospectively analyzed the clinical data of 81 patients with upper lumbar disc herniation admitted between January 2017 and July 2018, including 41 and 40 patients who underwent MIS-TLIF and TLIF, respectively. Demographic characteristics, preoperative functional scores, perioperative indicators, and postoperative complications were compared. We performed consecutive comparisons of visual analog scale (VAS) scores of the lumbar and leg regions, Oswestry disability index (ODI), Japanese Orthopaedic Association scores (JOA), and MacNab scores at the final follow-up, to assess clinical outcomes 5 years postoperatively. RESULTS: VAS scores of the back and legs were significantly lower in the MIS-TLIF than the TLIF group at 3 months and 1 year postoperatively (P < 0.05). Intraoperative bleeding and postoperative hospitalization time were significantly lower, and the time to return to work/normal life was shorter in the MIS-TLIF than in the TLIF group (P < 0.05). The differences in JOA scores and ODI scores between the two groups at 3 months, 1 year, and 3 years postoperatively were statistically significant (P < 0.05). CONCLUSION: The early clinical efficacy of MIS-TLIF was superior to that of TLIF, but no differences were found in mid-term clinical efficacy. Further, MIS-TLIF has the advantages of fewer medical injuries, shorter hospitalization times, and faster postoperative functional recovery.

Comparison of Fusion Rate and Clinical Outcomes in Minimally Invasive and Conventional Posterior Fusion for Lumbar Degenerative Disease: A Network Meta-Analysis.

BACKGROUND: The fusion rate, clinical efficacy, and complications of minimally invasive fusion surgery and open fusion surgery in the treatment of lumbar degenerative disease are still unclear. METHODS: We conducted a literature search using PubMed, Embase, Cochrane Library, CNKI, and WANFANG databases. RESULTS: This study included 38 retrospective studies involving 3097 patients. Five intervention modalities were considered: unilateral biportal endoscopic-lumbar interbody fusion (UBE-LIF), percutaneous endoscopic-lumbar interbody fusion (PE-LIF), minimally invasive-transforaminal lumbar interbody fusion (MIS-TLIF), transforaminal lumbar interbody fusion (TLIF), and posterior lumbar interbody fusion (PLIF). Quality assessment indicated that each study met acceptable quality standards. PE-LIF demonstrated reduced low back pain (Odds Ratio = 0.50, Confidence Interval: 0.38-0.65) and lower complication rate (Odds Ratio = 0.46, Confidence Interval: 0.25-0.87) compared to PLIF. However, in indirect comparisons, PE-LIF showed the lowest fusion rates, with the ranking as follows: UBE-LIF (83.2%) > MIS-TLIF (59.6%) > TLIF (44.3%) > PLIF (39.8%) > PE-LIF (23.1%). With respect to low back pain relief, PE-LIF yielded the best results, with the order of relief as follows: PE-LIF (96.4%) > MIS-TLIF (64.8%) > UBE-LIF (62.6%) > TLIF (23.0%) > PLIF (3.2%). Global and local consistency tests showed satisfactory results, and heterogeneity tests indicated good stability. CONCLUSIONS: Compared to conventional open surgery, minimally invasive fusion surgery offered better scores for low back pain and Oswestry Disability Index, lower complication rates, reduced bleeding, and shorter hospital stays. However, minimally invasive fusion surgery did not show a significant advantage in terms of fusion rate and had a longer operative time.

Three-Dimensional-Printed Spherical Hollow Structural Scaffolds for Guiding Critical-Sized Bone Regeneration.

The treatment of bone tissue defects continues to be a complex medical issue. Recently, three-dimensional (3D)-printed scaffold technology for bone tissue engineering (BTE) has emerged as an important therapeutic approach for bone defect repair. Despite the potential of BTE scaffolds to contribute to long-term bone reconstruction, there are certain challenges associated with it including the impediment of bone growth within the scaffolds and vascular infiltration. These difficulties can be resolved by using scaffold structural modification strategies that can effectively guide bone regeneration. This study involved the preparation of biphasic calcium phosphate spherical hollow structural scaffolds (SHSS) with varying pore sizes using 3D printing (photopolymerized via digital light processing). The chemical compositions, microscopic morphologies, mechanical properties, biocompatibilities, osteogenic properties, and impact on repairing critical-sized bone defects of SHSS were assessed through characterization analyses, in vitro cytological assays, and in vivo biological experiments. The results revealed the biomimetic properties of SHSS and their favorable biocompatibility. The scaffolds stimulated cell adhesion, proliferation, differentiation, and migration and facilitated the expression of osteogenic genes and proteins, including Col-1, OCN, and OPN. Furthermore, they could effectively repair a critical-sized bone defect in a rabbit femoral condyle by establishing an osteogenic platform and guiding bone regeneration in the defect region. This innovative strategy presents a novel therapeutic approach for assessing critical-sized bone defects.

Hypoxia inhibits the differentiation of mesenchymal stem cells into osteoblasts by activation of Notch signaling.

Postnatal bone marrow contains mesenchymal stem cells (MSCs) that are osteoblast precursors with great therapeutic potential. The oxygen tension in bone marrow is about 1-7% pO2 which is much lower than that of the external environment. The effect of these hypoxic conditions on MSC differentiation is not fully understood. In this study, we show that hypoxia inhibits osteogenic differentiation of MSCs, and that this effect is associated with increased levels of Notch1 and increased activity of Notch signaling. Knockdown of Notch1 in MSCs by shRNA markedly rescues the impaired osteogenic differentiation of MSCs. Furthermore, Notch1 physiologically binds to Runx2 and inhibits its transcriptional activity. Thus, hypoxia inhibits MSC differentiation into osteoblasts by activating the Notch pathway.

Epitranscriptomic subtyping, visualization, and denoising by global motif visualization.

Advances in sequencing technologies have empowered epitranscriptomic profiling at the single-base resolution. Putative RNA modification sites identified from a single high-throughput experiment may contain one type of modification deposited by different writers or different types of modifications, along with false positive results because of the challenge of distinguishing signals from noise. However, current tools are insufficient for subtyping, visualization, and denoising these signals. Here, we present iMVP, which is an interactive framework for epitranscriptomic analysis with a nonlinear dimension reduction technique and density-based partition. As exemplified by the analysis of mRNA m5C and ModTect variant data, we show that iMVP allows the identification of previously unknown RNA modification motifs and writers and the discovery of false positives that are undetectable by traditional methods. Using putative m6A/m6Am sites called from 8 profiling approaches, we illustrate that iMVP enables comprehensive comparison of different approaches and advances our understanding of the difference and pattern of true positives and artifacts in these methods. Finally, we demonstrate the ability of iMVP to analyze an extremely large human A-to-I editing dataset that was previously unmanageable. Our work provides a general framework for the visualization and interpretation of epitranscriptomic data.

Comparison between oblique lumbar interbody fusion and posterior lumbar interbody fusion for the treatment of lumbar degenerative diseases: a systematic review and meta-analysis.

BACKGROUND: Although oblique lumbar interbody fusion (OLIF) has produced good results for lumbar degenerative diseases (LDDs), its efficacy vis-a-vis posterior lumbar interbody fusion (PLIF) remains controversial. This meta-analysis aimed to compare the clinical efficacy of OLIF and PLIF for the treatment of LDDs. METHODS: A comprehensive assessment of the literature was conducted, and the quality of retrieved studies was assessed using the Newcastle-Ottawa Scale. Clinical parameters included the visual analog scale (VAS), and Oswestry Disability Index (ODI) for pain, disability, and functional levels. Statistical analysis related to operative time, intraoperative bleeding, length of hospital stay, lumbar lordosis angle, postoperative disc height, and complication rates was performed. The PROSPERO number for the present systematic review is CRD42023406695. RESULTS: In total, 574 patients (287 for OLIF, 287 for PLIF) from eight studies were included. The combined mean postoperative difference in ODI and lumbar VAS scores was - 1.22 and - 0.43, respectively. In postoperative disc, height between OLIF and PLIF was 2.05. The combined advantage ratio of the total surgical complication rate and the mean difference in lumbar lordosis angle between OLIF and PLIF were 0.46 and 1.72, respectively. The combined mean difference in intraoperative blood loss and postoperative hospital stay between OLIF and PLIF was - 128.67 and - 2.32, respectively. CONCLUSION: Both the OLIF and PLIF interventions showed good clinical efficacy for LDDs. However, OLIF demonstrated a superior advantage in terms of intraoperative bleeding, hospital stay, degree of postoperative disc height recovery, and postoperative complication rate.

3D-Printed GelMA/PEGDA/F127DA Scaffolds for Bone Regeneration.

Tissue-engineered scaffolds are an effective method for the treatment of bone defects, and their structure and function are essential for bone regeneration. Digital light processing (DLP) printing technology has been widely used in bone tissue engineering (BTE) due to its high printing resolution and gentle printing process. As commonly used bioinks, synthetic polymers such as polyethylene glycol diacrylate (PEGDA) and Pluronic F127 diacrylate (F127DA) have satisfactory printability and mechanical properties but usually lack sufficient adhesion to cells and tissues. Here, a compound BTE scaffold based on PEGDA, F127DA, and gelatin methacrylate (GelMA) was successfully prepared using DLP printing technology. The scaffold not only facilitated the adhesion and proliferation of cells, but also effectively promoted the osteogenic differentiation of mesenchymal stem cells in an osteoinductive environment. Moreover, the bone tissue volume/total tissue volume (BV/TV) of the GelMA/PEGDA/F127DA (GPF) scaffold in vivo was 49.75 ± 8.50%, higher than the value of 37.10 ± 7.27% for the PEGDA/F127DA (PF) scaffold and 20.43 ± 2.08% for the blank group. Therefore, the GPF scaffold prepared using DLP printing technology provides a new approach to the treatment of bone defects.

First-Aid Hydrogel Wound Dressing with Reliable Hemostatic and Antibacterial Capability for Traumatic Injuries.

First-aid for severe traumatic injuries in the battlefield or pre-hospital environment, especially for skin defects or visceral rupture, remains a substantial medical challenge even in the context of the rapidly evolving modern medical technology. Hydrogel-based biomaterials are highly anticipated for excellent biocompatibility and bio-functional designability. Yet, inadequate mechanical and bio-adhesion properties limit their clinical application. To address these challenges, a kind of multifunctional hydrogel wound dressing is developed with the collective multi-crosslinking advantages of dynamic covalent bonds, metal-catechol chelation, and hydrogen bonds. The mussel-inspired design and zinc oxide-enhanced cohesion strategy collaboratively reinforce the hydrogel's bio-adhesion in bloody or humoral environments. The pH-sensitive coordinate Zn2+ -catechol bond and dynamic Schiff base with reversible breakage and reformation equip the hydrogel dressing with excellent self-healing and on-demand removal properties. In vivo evaluation in a rat ventricular perforation model and Methicillin-resistant Staphylococcus aureus (MRSA)-infected full-thickness skin defect model reveal excellent hemostatic, antibacterial and pro-healing effectiveness of the hydrogel dressing, demonstrating its great potential in dealing with severe bleeding and infected full-thickness skin wounds.

Functionalized 3D-Printed PLA Biomimetic Scaffold for Repairing Critical-Size Bone Defects.

The treatment of critical-size bone defects remains a complicated clinical challenge. Recently, bone tissue engineering has emerged as a potential therapeutic approach for defect repair. This study examined the biocompatibility and repair efficacy of hydroxyapatite-mineralized bionic polylactic acid (PLA) scaffolds, which were prepared through a combination of 3D printing technology, plasma modification, collagen coating, and hydroxyapatite mineralization coating techniques. Physicochemical analysis, mechanical testing, and in vitro and animal experiments were conducted to elucidate the impact of structural design and microenvironment on osteogenesis. Results indicated that the PLA scaffold exhibited a porosity of 84.1% and a pore size of 350 µm, and its macrostructure was maintained following functionalization modification. The functionalized scaffold demonstrated favorable hydrophilicity and biocompatibility and promoted cell adhesion, proliferation, and the expression of osteogenic genes such as ALP, OPN, Col-1, OCN, and RUNX2. Moreover, the scaffold was able to effectively repair critical-size bone defects in the rabbit radius, suggesting a novel strategy for the treatment of critical-size bone defects.