ABSTRACT
Sustainable, durable, and diverse photochromic smart textiles based on bacterial cellulose (BC) have emerged as attractive candidates in UV-sensing applications due to the green and easy functionalization of BC. However, existing BC-based photochromic textiles lack photochromic efficiency and combining fastness. In this study, a green strategy for in situ fermentation is developed to achieve the directional distribution of functional particles and remarkable photochromism in photochromic bacterial cellulose (PBC). The unique functional design obtained by regulating the photochromic dye distribution in 3D nanonetworks of PBCs during in situ growth affords a more uniform distribution and high fastness. Benefiting from the uniform distribution of photochromic dyes and adequate utilization of the 3D network structure, more surface area is provided to receive and utilize the photon energy from the UV rays, making the photochromic process more effective. The as-prepared PBCs exhibited rapid (within 1 min) and stable (30 cycles) discoloration and multicolor selectivity. Their simple preparation process and exceptional wearability, e.g., their flexibility, lightweight, and air permeability, make them suitable for various applications, including tunable color switching systems, photopatterning, and daily sunlight UV monitoring. This study provides empirical value for the biofabrication of photochromic textiles and wearable flexible UV sensors.
Subject(s)
Cellulose , Sunlight , Ultraviolet Rays , Cellulose/chemistry , Bacteria , Textiles , ColorABSTRACT
Molecularly imprinted polymers (MIPs) are promising for precise protein separation and purification. However, challenges persist due to their large size, variable configuration, and instability during preparation. Here, a simple silicon self-assembly program was designed to synthesize MIPs without any organic reagents and acid-base catalysis, avoiding the structural damage of protein under severe conditions. In this method, employing hemoglobin (Hb) as a model protein, with tween-20 in emulsification, and tetraethyl orthosilicate (TEOS) as the cross-linking agent, along with co-functional monomers 3-aminopropyltriethoxysilane (APTES) and benzyl(triethoxy)silane (BnTES), enhanced binding efficacy was achieved. Successful imprinting was evidenced through surface morphology observation and physical/chemical property evaluations of the synthesized MIPs. A series of adsorption experiments were performed to investigate the recognition performance of Hb-MIPs. The Hb-MIPs not only exhibited large adsorption capacity (400 µg/mg) and good imprinting factor (6.09) toward template protein, but also showed satisfactory selectivity for reference proteins. Five cycles of adsorption proved that the Hb-MIPs had good reusability. In addition, the successful isolation of HB from bovine blood indicated that Hb-MIPs were an excellent separation and purification material. The mild preparation conditions and good adsorption capacity demonstrated the potential value of this method in separation and purification research.
Subject(s)
Hemoglobins , Molecularly Imprinted Polymers , Nanoparticles , Silicon Dioxide , Molecularly Imprinted Polymers/chemistry , Adsorption , Silicon Dioxide/chemistry , Animals , Hemoglobins/chemistry , Hemoglobins/isolation & purification , Cattle , Nanoparticles/chemistry , Molecular Imprinting , Polymerization , Silanes/chemistryABSTRACT
The motion detection and thermotherapy provides a convenient strategy for the diagnosis and rehabilitation assessment of joint injuries. However, it is still challenging to simultaneously achieve accurate joint motion monitoring and on-demand thermotherapy. Herein, core-sheath sensing yarns (CSSYs) is proposed and fabricated for excellent electrical and photothermal heating, which consists of carbon black (CB)-coated nylon (sheath layer), silver-plated nylon and elastic spandex yarns (core layer). The CSSYs demonstrates great joule heating performance, which reaches 75 °C at 2 V applied voltage. The good thermal management performance can be well maintained when weaving these yarns into bifunctional smart textile. Further, the optimized double-ply CSSYs (DPCSSYs) with helically twisted structure possess several appealing sensing performance, including preferable strain sensitivity (0.854), excellent linearity (0.962), and superior durability (over 5000 cycles). The as-woven bifunctional smart textile can provide instant and convenient thermotherapy to the injured joints, and simultaneously monitor the injury and recovery conditions of the joint. Therefore, the designed bifunctional smart textile can provide a promising route for developing next-generation healthcare smart textile.
Subject(s)
Nylons , Wearable Electronic Devices , Humans , Textiles , Motion , Polyurethanes/chemistryABSTRACT
α-Glucosidase plays a direct role in the metabolic pathways of starch and glycogen, any dysfunction in its activity could result in metabolic disease. Concurrently, this enzyme serves as a target for diverse drugs and inhibitors, contributing to the regulation of glucose metabolism in the human body. Here, an integrated analytical method was established to screen inhibitors of α-glucosidase. This step-by-step screening model was accomplished through the biosensing and affinity chromatography techniques. The newly proposed sensing program had a good linear relationship within the enzyme activity range of 0.25 U mL-1 to 1.25 U mL-1, which can quickly identify active ingredients in complex samples. Then the potential active ingredients can be captured, separated, and identified by an affinity chromatography model. The combination of the two parts was achieved by an immobilized enzyme technology and a microdevice for reaction, and the combination not only ensured efficiency and accuracy for inhibitor screening but also eliminated the occurrence of false positive results in the past. The emodin, with a notable inhibitory effect on α-glucosidase, was successfully screened from five traditional Chinese medicines using this method. The molecular docking results also demonstrated that emodin was well embedded into the active pocket of α-glucosidase. In summary, the strategy provided an efficient method for developing new enzyme inhibitors from natural products.
Subject(s)
Emodin , Glycoside Hydrolase Inhibitors , Humans , Glycoside Hydrolase Inhibitors/pharmacology , Glycoside Hydrolase Inhibitors/chemistry , Molecular Docking Simulation , alpha-Glucosidases/metabolism , Chromatography, Affinity , Plant Extracts/chemistryABSTRACT
Although electronic textiles that can detect external stimuli show great promise for fire rescue, existing firefighting clothing is still scarce for simultaneously integrating reliable early fire warning and real-time motion sensing, hardly providing intelligent personal protection under complex high-temperature conditions. Herein, we introduce an "all-in-one" hierarchically sandwiched fabric (HSF) sensor with a simultaneous temperature and pressure stimulus response for developing intelligent personal protection. A cross-arranged structure design has been proposed to tackle the serious mutual interference challenge during multimode sensing using two separate sets of core-sheath composite yarns and arrayed graphene-coated aerogels. The functional design of the HSF sensor not only possesses wide-range temperature sensing from 25 to 400 °C without pressure disturbance but also enables highly sensitive pressure response with good thermal adaptability (up to 400 °C) and wide pressure detection range (up to 120 kPa). As a proof of concept, we integrate large-scalable HSF sensors onto conventional firefighting clothing for passive/active fire warning and also detecting spatial pressure and temperature distribution when a firefighter is exposed to high-temperature flames, which may provide a useful design strategy for the application of intelligent firefighting protective clothing.
Subject(s)
Pressure , Temperature , Textiles , Textiles/analysis , Humans , Fires , Firefighters , Protective Clothing , Graphite/chemistry , Wearable Electronic DevicesABSTRACT
Background: Psoriasis is a chronic, inflammatory skin disease that is often accompanied by multiple comorbidities. Obesity is considered an independent risk factor for the development of psoriasis. However, most of the related data are derived from epidemiological studies conducted in the United States of America and Europe. This study aimed to compare the clinical characteristics of patients with psoriasis who are overweight/obese and patients with psoriasis with normal weight in China. Methods: We reviewed the medical records of 208 patients with psoriasis. Based on their body mass index (BMI), the patients were divided into two groups: patients with psoriasis who were overweight/obese and patients with psoriasis with normal weight. Results: The most patients enrolled in this study were men (77.40%). Patients with psoriasis who were overweight/obese had a higher mean age, longer disease duration, and significantly higher Psoriasis Area and Severity Index (PASI) values (P=0.032). Additionally, the incidence of fatty liver, hyperlipidemia, hyperuricemia, and abnormal liver function was higher among patients with psoriasis who were overweight/obese (P<0.05). Linear regression analysis revealed a linear relationship between PASI values and BMI (P=0.016). Moreover, patients with psoriasis who were overweight/obese had significantly higher levels of serum alanine transaminase (ALT), aspartate transaminase (AST), uric acid (UC), total cholesterol (TC), low-density lipoprotein (LDL), and fasting plasma glucose (FPG) (P<0.05) and lower serum high-density lipoprotein (HDL) levels and absolute lymphocyte count (ALC) (P<0.05). Conclusion: Patients with psoriasis who are overweight/obese have more severe psoriatic lesions and metabolic comorbidities. Detailed assessment of the BMI of patients with psoriasis revealed that weight loss may be necessary for patients who are overweight/obese to reduce the risk of metabolic disorders.
ABSTRACT
Capacitance tactile sensors (TSs) based on electrode distance and contact area variations have been notably employed for various purposes due to their magnificent stress sensitivity. Nevertheless, developing TSs with tunable responsiveness in a broad pressure interval is crucial owing to the trade-off between sensitivity and linear identification range. Herein, a TS including Ag-coated Velcro and spacer fabric is constructed, where its sandwich framework provides a sizable expansion in compression deformation ability. In addition, a multilayered framework composed of the stacked TS from self-adhesive Velcro provides more contact area and significant deformation for stress distribution, further balancing the sensitivity, sensing range, and linearity for smart garment application. By utilizing the overlaid selection of multilayer structures, the all-textile TS demonstrates outstanding sensitivity with a one-layer structure (0.036 kPa-1) over a pressure range of 0.2-5 kPa and retains a sensitivity of 0.002 kPa-1 in a four-layer structure over a wide pressure range of 0.2-110 kPa, representing a significant improvement compared to previous results. The sensor possesses excellent performance in terms of response speed (104 ms), repeatability (10,000 cycles), and flexibility. In addition, its significant applications, involving human motion detection, pliable keyboards, and human-computer interface, are successfully shown. Based on the facile and scalable manufacturing approach, a suitable procedure is presented to construct next-generation wearable electronics.
ABSTRACT
The dynamic regulation of fiber stress distribution in the yarn-forming triangle area is critical for controlling variable composite yarn structures, including siro and sirofil composite yarns. In this study, comparison analyses of the variable geometric structure and stress distribution during the yarn-forming process, which involves step rolls with asymmetrical fiber control, have been carried out using ring-spinning technology. The geometric analyses show that partly staple fibers are continuously controlled while other fibers intermittently lack stress restraint, resulting in cyclically changed helical angles and wrapping density in the yarn-forming triangle area. The yarn structure model displayed that periodically distributed staple fibers occur in siro composite yarn, while sirofil composite yarn shows gradual periodic changes with uniform thickness variations, caused by cyclical changes in the stress distribution between filaments, and the strand altered the yarn-forming zone shapes from symmetrical to offset. Then, a systematic comparison of variable composite yarns with different frequencies (high, medium and low frequency) revealed that low-frequency step roll with wider grooves resulted in an intermittent output of staple fibers with less stress restraint, resulting in more pronounced structural variation in the siro and sirofil composite yarns with a slight yarn quality deterioration.
ABSTRACT
Control of tension distribution in the spinning triangle region that can facilitate fiber motion and transfer is highly desirable for high quality yarn production. Here, the key mechanisms and a mechanical model of gradient regulation of fiber tension and motion with rotary heterogeneous contact surfaces were theoretically analyzed. The linear velocity gradient, effected on a fiber strand using rotary heterogeneous contact surfaces, could balance and stabilize the structure and stress distribution of spinning triangle area, which could capture exposed fiber to reduce hairiness formation and enhance the internal and external fiber transfer to strengthen the fiber utilization rate. Then, varied yarns spun without and with the rotary grooved and rotary heterogeneous contact surfaces were tested to compare the property improvement for verifying above-mentioned theory. The hairiness, irregularity, and tensity of the yarns spun with rotary heterogeneous contact surfaces spun yarns were significantly improved compared to other spun yarns, which effectively corresponded well to the theoretical analysis. Based on this spinning method, this effective, low energy-consuming, easy spinning apparatus can be used with varied fiber materials for high-quality yarn production.
ABSTRACT
In this study, a carbon fiber/tencel composite braided fabric was used in stable and continuous all-day desalination technology with superior photothermal and electrothermal conversion capability. The desalination performance was regulated by adjusting the braiding parameters. Because the water in carbon fibers is maintained in the capillary state and thus evaporates more easily in clusters, it required less energy to evaporate water off the composite fabric. Under 1 sun illumination, the average evaporation rate and the evaporation efficiency were 1.84 kg m-2 h-1 and 88.8%, respectively. When a small amount of electricity (3 V) was applied, the evaporation rate of the braided fabric was maintained at over 1.88 kg m-2 h-1, and a superior desalination performance during the daytime was achieved. Under continuous all-day operation, most of the organics, metal ions, and contaminants were effectively eliminated from the water, which satisfied the WHO drinkable water standards. Our results can contribute to paving the way for efficient and stable wastewater treatment, seawater desalination, and drinking water collection methods.
ABSTRACT
Easy-to-fabricate, large-area, and inexpensive microstructures that realize control of the polarization of terahertz (THz) radiation are of fundamental importance to the development of the field of THz wave photonics. However, due to the lack of natural materials that can facilitate strong THz radiation-matter interactions, THz polarization components remain an undeveloped technology. Strong resonance-based responses offered by THz metamaterials have led to the recent development of THz metadevices, whereas, for polarization control devices, micrometer-scale fabrication techniques including aligned photolithography are generally required to create multilayer microstructures. In this work, leveraging a two-step textile manufacturing approach, a chiral metamaterial capable of exhibiting strong chiroptical responses at THz frequencies is demonstrated. Chiral-selective transmission and pronounced optical activity are experimentally observed. In sharp contrast to smart-clothing-related devices (e.g., textile antennas), the investigated chiral metamaterials gain their THz properties directly from the yarn-twisting enabled microhelical strings. It is envisioned that the interplay between meta-atom designs and textile manufacturing technology will lead to a new family of metadevices for complete control over the phase, amplitude, and polarization of THz radiation.
ABSTRACT
BACKGROUND: Psoriasis (PSO) is a systemic inflammatory disorder that presents with erythematous scaling of the skin and is associated with autoimmune dysfunction. Atherosclerosis is one of the major comorbidities of PSO. PSO-associated inflammatory factor IL-17 could lead to vascular endothelial cell injury and atherosclerosis. While some research results show that IL-17 helps stabilize plaque formation. Efficacy and safety on PSO and psoriatic arthritis (PSA) of existing IL-17/IL-17R biologics (secukinumab, ixekizumab, brodalumab, and bimekizumab) have been clinically validated, but whether they can improve atherosclerotic outcomes in psoriatic patients remains controversial. METHODS: Seven electronic search engines will be searched from inception to December 1, 2020, including PubMed, Embase, Scopus, PsycINFO, Global Health, Web of Science and the Cochrane Library. Clinical trial registries, potential grey literature, relevant conference abstracts, and reference lists of identified studies will also be searched. Literature selection, data extraction, and quality assessment will be done by 2 independent authors. Based on the heterogeneity test, the fixed effect or random effect model will be used for data synthesis. Changes in lung function will be evaluated as the primary outcome. Assessment of symptoms, quality of life, medication use, exacerbations and adverse events will be assessed as secondary outcomes. RevMan V. 5.3.5 (The Nordic Cochrane Centre, Copenhagen, Denmark) will be used for meta-analysis. RESULTS: This study will provide a synthesis of current evidence of IL-17/IL-17R inhibitors on atherosclerosis in PSO and PSA. CONCLUSION: The conclusion of our study will provide updated evidence to judge whether IL-17/IL-17R inhibitors is an effective solution to atherosclerosis as comorbidity of PSO and PSA. PROSPERP REGISTRATION NUMBER: CRD42020209897.
Subject(s)
Antibodies, Monoclonal, Humanized/therapeutic use , Arthritis, Psoriatic/complications , Atherosclerosis/drug therapy , Interleukin-17/antagonists & inhibitors , Receptors, Interleukin-17/antagonists & inhibitors , Antibodies, Monoclonal, Humanized/pharmacology , Atherosclerosis/etiology , Humans , Meta-Analysis as Topic , Systematic Reviews as TopicABSTRACT
To obtain a hydrophobic surface, TiO2 coatings are deposited on the surface of silk fabric using atomic layer deposition (ALD) to realize a hierarchical roughness structure. The surface morphology and topography, structure, and wettability properties of bare silk fabric and TiO2-coated silk fabrics thus prepared are evaluated using scanning electron microscopy (SEM), field-emission scanning electron microscopy (FESEM), scanning probe microscope (SPM), X-ray diffraction (XRD), static water contact angles (WCAs), and roll-off angles, respectively. The surfaces of the silk fabrics with the TiO2 coatings exhibit higher surface roughnesses compared with those of the bare silk fabric. Importantly, the hydrophobic and laundering durability properties of the TiO2-coated silk fabrics are largely improved by increasing the thickness of the ALD TiO2 coating. Meanwhile, the ALD process has a litter effect on the service performance of silk fabric. Overall, TiO2 coating using an ALD process is recognized as a promising approach to produce hydrophobic surfaces for elastic materials.