ABSTRACT
Solar distillation is a promising approach for addressing water scarcity, but relentless stress/strain perturbations induced by wind and waves would inevitably cause structural damage to solar absorbers. Despite notable advances in efficient solar absorbers, there have been no reports of compliant and robust solar absorbers withstanding practical mechanical impacts. Herein, an elastic and robust hydrogel absorber that exhibited a high level of evaporation performance was fabricated by introducing ion-coordinated MXene nanosheets as photothermal conversion units and mechanically enhanced fillers. The ion-coordinated MXene nanosheets acting as strong cross-linking points provided excellent elasticity and robustness to the hydrogel absorber. As a result, the evaporation rate of hydrogel absorber, with a high initial value of 2.61 kg m-2 h-1 under one sun irradiation, remained at 2.15 kg m-2 h-1 under a 100% tensile strain state and 2.40 kg m-2 h-1 after 10â¯000 stretching-releasing cycles. This continuous and stable water desalination approach provides a promising device for actual seawater distillation.
ABSTRACT
Chiral three-dimensional (3D) perovskites exhibit exceptional optoelectronic characteristics and inherent chiroptical activity, which may overcome the limitations of low-dimensional chiral optoelectronic devices and achieve superior performance. The integrated chip of high-performance arbitrary polarized light detection is one of the aims of chiral optoelectronic devices and may be achieved by chiral 3D perovskites. Herein, we first fabricate the wafer-scale integrated full-Stokes polarimeter by the synergy of unprecedented chiral 3D perovskites (R/S-PyEA)Pb2Br6 and one-step capillary-bridge assembly technology. Compared with the chiral low-dimensional perovskites, chiral 3D perovskites present smaller exciton binding energies of 57.3 meV and excellent circular dichroism (CD) absorption properties, yielding excellent circularly polarized light (CPL) photodetectors with an ultrahigh responsivity of 86.7 A W-1, an unprecedented detectivity exceeding 4.84 × 1013 Jones, a high anisotropy factor of 0.42, and high-fidelity CPL imaging with 256 pixels. Moreover, the anisotropic crystal structure also enables chiral 3D perovskites to have a large linear-polarization response with a polarized ratio of 1.52. The combination of linear-polarization and circular-polarization discrimination capabilities guarantees the achievement of a full-Stokes polarimeter. Our study provides new research insights for the large-scale patterning wafer integration of high-performance chiroptical devices.
ABSTRACT
OBJECTIVE: The alterations of the functional network (FN) in anti-N-methyl-Daspartate receptor (NMDAR) encephalitis have been recognized by functional magnetic resonance imaging studies. However, few studies using the electroencephalogram (EEG) have been performed to explore the possible FN changes in anti-NMDAR encephalitis. In this study, the aim was to explore any FN changes in patients with anti-NMDAR encephalitis. METHODS: Twenty-nine anti-NMDAR encephalitis patients and 29 age- and gender-matched healthy controls (HC) were assessed using 19-channel EEG examination. For each participant, five 10-second epochs of resting state EEG with eyes closed were extracted. The cortical source signals of 84 Brodmann areas were calculated using the exact low resolution brain electromagnetic tomography (eLORETA) inverse solution by LORETA-KEY. Phase Lag Index (PLI) matrices were then obtained and graph and relative band power (RBP) analyses were performed. RESULTS: Compared with healthy controls, functional connectivity (FC) in the delta, theta, beta 1 and beta 2 bands significantly increased within the 84 cortical source signals of anti-NMDAR encephalitis patients (p < 0.05) and scalp FC in the alpha band decreased within the 19 electrodes. Additionally, the anti-NMDAR encephalitis group exhibited higher local efficiency and clustering coefficient compared to the healthy control group in the four bands. The slowing band RBP increased while the fast band RBP decreased in multiple-lobes and some of these changes in RBP were correlated with the modified Rankin Scale (mRS) and Mini-mental State Examination (MMSE) in anti-NMDAR encephalitis patients. CONCLUSIONS: This study further deepens the understanding of related changes in the abnormal brain network and power spectrum of anti-NMDA receptor encephalitis. The decreased scalp alpha FC may indicate brain dysfunction, while the increased source beta FC may indicate a compensatory mechanism for brain function in anti-NMDAR encephalitis patients. These findings extend understanding of how the brain FN changes from a cortical source perspective. Further studies are needed to detect correlations between altered FNs and clinical features and characterize their potential value for the management of anti-NMDAR encephalitis.
Subject(s)
Anti-N-Methyl-D-Aspartate Receptor Encephalitis , Electroencephalography , Nerve Net , Humans , Anti-N-Methyl-D-Aspartate Receptor Encephalitis/physiopathology , Anti-N-Methyl-D-Aspartate Receptor Encephalitis/diagnostic imaging , Female , Male , Adult , Young Adult , Nerve Net/physiopathology , Nerve Net/diagnostic imaging , Brain Waves/physiology , Adolescent , Brain/physiopathology , Brain/diagnostic imaging , ConnectomeABSTRACT
Generating circularly polarized luminescence (CPL) with simultaneous high photoluminescence quantum yield (PLQY) and dissymmetry factor (glum) is difficult due to usually unmatched electric transition dipole moment (µ) and magnetic transition dipole moment (m) of materials. Herein we tackle this issue by playing a "cascade cationic insertion" trick to achieve strong CPL (with PLQY of ~100 %) in lead-free metal halides with high glum values reaching -2.3×10-2 without using any chiral inducers. Achiral solvents of hydrochloric acid (HCl) and N, N-dimethylformamide (DMF) infiltrate the crystal lattice via asymmetric hydrogen bonding, distorting the perovskite structure to induce the "intrinsic" chirality. Surprisingly, additional insertion of Cs+ cation to substitute partial (CH3)2NH2 + transforms the chiral space group to achiral but the crystal maintains chiroptical activity. Further doping of Sb3+ stimulates strong photoluminescence as a result of self-trapped excitons (STEs) formation without disturbing the crystal framework. The chiral perovskites of indium-antimony chlorides embedded on LEDs chips demonstrate promising potential as CPL emitters. Our work presents rare cases of chiroptical activity of highly luminescent perovskites from only achiral building blocks via spontaneous resolution as a result of symmetry breaking.
ABSTRACT
It is challenging to design one non-noble material with balanced bifunctional performance for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) for commercial sustainability at a low cost since the different electrocatalytic mechanisms are not easily matchable for each other. Herein, a self-standing hybrid system Ni18 Fe12 Al70 , consisting of Ni2 Al3 and Ni3 Fe phases, was constructed by laser-assisted aluminum (Al) incorporation towards full water splitting. It was found that the incorporation of Al could effectively tune the morphologies, compositions and phases. The results indicate that Ni18 Fe12 Al70 delivers an extremely low overpotential to trigger both HER (η100 =188â mV) and OER (η100 =345â mV) processes and maintains a stable overpotential for 100â h, comparable to state-of-the-art electrocatalysts. The synergistic effect of Ni2 Al3 and Ni3 Fe alloys on the HER process is confirmed based on theoretical calculation.
ABSTRACT
Due to the pronounced anisotropic response to circularly polarized light, chiral hybrid organic-inorganic metal halides have been regarded as promising candidates for the application in nonlinear chiroptics, especially for the second-harmonic generation circular dichroism (SHG-CD) effect. However, designing novel lead-free chiral hybrid metal halides with large anisotropy factors and high laser-induced damage thresholds (LDT) of SHG-CD remains challenging. Herein, we develop the first chiral hybrid germanium halide, (R/S-NEA)3 Ge2 I7 â H2 O (R/S-NGI), and systematically investigated its linear and nonlinear chiroptical properties. S-NGI and R-NGI exhibit large anisotropy factors (gSHG-CD ) of 0.45 and 0.48, respectively, along with a high LDT of 38.46â GW/cm2 ; these anisotropy factors were the highest values among the reported lead-free chiral hybrid metal halides. Moreover, the effective second-order nonlinear optical coefficient of S-NGI could reach up to 0.86â pm/V, which was 2.9 times higher than that of commercial Y-cut quartz. Our findings facilitate a new avenue toward lead-free chiral hybrid metal halides, and their implementation in nonlinear chiroptical applications.
ABSTRACT
By performing first-principles calculations, we studied hexagonal-boron-nitride (hBN)-supported graphene, in which moiré structures are formed due to lattice mismatch or interlayer rotation. A series of graphene/hBN systems has been studied to reveal the evolution of properties with respect to different twisting angles (21.78°, 13.1°, 9.43°, 7.34°, 5.1°, and 3.48°). Although AA- and AB-stacked graphene/hBN are gapped at the Dirac point by about 50 meV, the energy gap of the moiré graphene/hBN, which is much more asymmetric, is only about several meV. Although the Dirac cone of graphene residing in the wide gap of hBN is not much affected, the calculated Fermi velocity is found to decrease with the increase in the moiré super lattice constant due to charge transfer. The periodic potential imposed by hBN modulated charge distributions in graphene, leading to the shift of graphene bands. In agreement with experiments, there are dips in the calculated density of states, which get closer and closer to the Fermi energy as the moiré lattice grows larger.
ABSTRACT
Dopants can endow lead-free perovskite nanocrystals with novel photoelectric properties. However, understanding the effect of dopants on the structure and energy transfer of lead-free perovskite nanocrystals remains limited. In this work, we synthesize zero-dimensional Cs2ZrCl6 nanocrystals with a blue light quantum yield of up to 75.6% by an improved hot-injection method. And we introduce trace amounts of lanthanide ions (Ln3+) (<â¼8%) in the lattice of nanocrystals and establish an effective energy transfer channel from self-trapped excitons (STEs) to various Ln3+ ions (Tb3+, Eu3+, Dy3+, Sm3+, and Pr3+), which can achieve tunable photoluminescence between red, green and blue. Interestingly, with increasing Ln3+ concentrations (>â¼10%), the phase transition from the cubic phase Cs2ZrCl6:Ln3+ to the monoclinic phase Cs3LnCl6:Zr4+ occurred, while Zr4+ ions began to act as dopants. And a new energy transfer channel from dopant [ZrCl6]2- to host Ln3+ ions was established in the Cs3LnCl6 host accompanied by enhanced broadband photoluminescence excitation (PLE) and photoluminescence (PL). In particular, the photoluminescence quantum yield (PLQY) of Tb3+ ions increases from 0.77% to 54% upon the phase transition (under 276 nm excitation). Our study provides new insights into the effects of dopants on the structure of perovskite nanocrystals and is beneficial to the design of a variety of light-emitting materials for optoelectronic applications.
ABSTRACT
Lead-free halide perovskite materials possess low toxicity, broadband luminescence and robust stability compared with conventional lead-based perovskites, thus holding great promise for eyes-friendly white light LEDs. However, the traditionally used preparation methods with a long period and limited product yield have curtailed the commercialization of these materials. Here we introduce a universal hydrochloric acid-assistant powder-to-powder strategy which can accomplish the goals of thermal-, pressure-free, eco-friendliness, short time, low cost and high product yield, simultaneously. The obtained Cs2Na0.9Ag0.1In0.95Bi0.05Cl6 microcrystals exhibit bright self-trapped excitons emission with quantum yield of (98.3 ± 3.8)%, which could retain (90.5 ± 1.3)% and (96.8 ± 0.8)% after continuous heating or ultraviolet-irradiation for 1000 h, respectively. The phosphor converted-LED exhibited near-unity conversion efficiency from ultraviolet chip to self-trapped excitons emission at ~200 mA. Various ions doping (such as Cs2Na0.9Ag0.1InCl6:Ln3+) and other derived lead-free perovskite materials (such as Cs2ZrCl6 and Cs4MnBi2Cl12) with high luminous performance are all realized by our proposed strategy, which has shown excellent availability towards commercialization.
ABSTRACT
2D Ruddlesden-Popper (2D RP) perovskite, with attractive environmental and structural stability, has shown great application in perovskite solar cells (PSCs). However, the relatively inferior photovoltaic efficiencies of 2D PSCs limit their further application. To address this issue, ß-âfluorophenylethanamine (ß-âFPEA) as a novel spacer cation is designed and employed to develop stable and efficient quasi-2D RP PSCs. The strong dipole moment of the ß-âFPEA enhances the interactions between the cations and [PbI6 ]4- octahedra, thus improving the charge dissociation of quasi-2D RP perovskite. Additionally, the introduction of the ß-âFPEA cation optimizes the energy level alignment, improves the crystallinity, stabilizes both the mixed phase and a-FAPbI3 phase of the quasi-2D RP perovskite film, prolongs the carrier diffusion length, increases the carrier lifetime and decreases the trap density. By incorporating the ß-âFPEA, the quasi-2D RP PSCs exhibit a power conversion efficiency (PCE) of 16.77% (vs phenylethylammonium (PEA)-based quasi-2D RP PSCs of 12.81%) on PEDOT:PSS substrate and achieve a champion PCE of 19.11% on the PTAA substrate. It is worth noting that the unencapsulated ß-âFPEA-based quasi-2D RP PSCs exhibit considerably improved thermal and moisture stability. These findings provide an effective strategy for developing novel spacer cations for high-performance 2D RP PSCs.
ABSTRACT
Metal-octaaminophthalocyanine (MOAPc)-based 2D conductive metal-organic frameworks (cMOFs) have shown great potential in several applications, including sensing, energy storage, and electrocatalysis, due to their bimetallic characteristics. Here, we report a detailed metal substitution study on a family of isostructural cMOFs with Co2+, Ni2+, and Cu2+ as both the metal nodes and the metal centers in the MOAPc ligands. We observed that different metal nodes had variations in the reaction kinetics, particle sizes, and crystallinities. Importantly, the electronic structure and conductivity were found to be dependent on both types of metal sites in the 2D cMOFs. Ni-NiOAPc was found to be the most conductive one among the nine possible combinations with a conductivity of 54 ± 4.8 mS/cm. DFT calculations revealed that monolayer Ni-NiOAPc has neither the smallest bandgap nor the highest charge carrier mobility. Hence its highest conductivity stems from its high crystallinity. Collectively, these results provide structure property relationships for MOAPc-based cMOFs with amino coordination units.
ABSTRACT
In this paper, we propose a novel, flower-like disk resonator (FDR). The structure is made up of concentrically meander-shaped rings that are interconnected by straight beams, which have the potential to provide lower resonant frequency, lower frequency split, higher quality factor (Q), and longer decay time (τ). In comparison to the traditional ring-like disk resonator (RDR), the FDR has better immunity to crystal orientation error and fabrication errors owing to its all-linear structure. The prototype of this design is manufactured by silicon on insulator fabrication technique. The frequency response test and quality factor test are implemented at room temperature and under vacuum (5 Pa) using a readout circuit with feed-through cancellation. The results show that the frequency split of the FDR is less than 7.7 Hz without electrostatic tuning. The Q and τ are 21 883 and 0.69 s, respectively. With the same structure parameters, the resonant frequency and frequency split are decreased by 39.1% and 70.2%, and the Q and τ are greatly improved by 63.8% and 172%, respectively, compared to the RDR.
ABSTRACT
A 2D van der Waals (vdW) magnet can get rid of the constraints of lattice matching and compatibility and then create a variety of vdW heterostructures, which provides a opportunity for spintronic devices. However, the ability to reliably exfoliate large, high-quality vdW ferromagnetic Fe3GeTe2 (FGT) nanoflakes in scaled-up production is severely limited. Herein, an efficient and stable three-stage sonication-assisted liquid-phase exfoliation was developed for mass preparation of high-structural-integrity few- and single-layer FGT nanoflakes with a greatly enhanced intrinsic exchange bias. The three stages include slicing crystals, weakening interlayer vdW forces, and using ultrasonic cavitation. The highest yield of FGT nanoflakes is 22.3 wt % with single layers accounting for 6%. The size is controllable, and several micrometers, tens of micrometers, and a maximum of 103 µm are available. The 200 mg level output has overcome the limitations of mechanical exfoliation and molecular beam epitaxy in economically amplificated production. An intrinsic exchange bias is observed in the restacked nanoflakes due to the magnetic proximity on the interface of the FGT/natural surface oxide layer. The material reaches 578 Oe (2 K) and 2300 Oe after further oxidation, at least 250% higher than other precisely tailored vdW magnetic heterostructures. In addition, the unusual semiconductivity of the liquid-phase exfoliated FGT nanoflakes is reported. This work skillfully utilizes oxidation to enhance the potential of FGT for large-scale spintronics, optoelectronics, efficient data storage, and various extended applications, and it is beneficial for exfoliating other promising magnetic vdW materials.
ABSTRACT
Tactic analysis is a major issue in badminton as the effective usage of tactics is the key to win. The tactic in badminton is defined as a sequence of consecutive strokes. Most existing methods use statistical models to find sequential patterns of strokes and apply 2D visualizations such as glyphs and statistical charts to explore and analyze the discovered patterns. However, in badminton, spatial information like the shuttle trajectory, which is inherently 3D, is the core of a tactic. The lack of sufficient spatial awareness in 2D visualizations largely limited the tactic analysis of badminton. In this work, we collaborate with domain experts to study the tactic analysis of badminton in a 3D environment and propose an immersive visual analytics system, TIVEE, to assist users in exploring and explaining badminton tactics from multi-levels. Users can first explore various tactics from the third-person perspective using an unfolded visual presentation of stroke sequences. By selecting a tactic of interest, users can turn to the first-person perspective to perceive the detailed kinematic characteristics and explain its effects on the game result. The effectiveness and usefulness of TIVEE are demonstrated by case studies and an expert interview.