[Molecular mechanism of ligustilide attenuating OGD/R injury in PC12 cells by inhibiting ferroptosis].

The aim of this study is to explore the mechanism of ligustilide, the main active constituent of essential oils of traditional Chinese medicine Angelicae Sinensis Radix, on alleviating oxygen-glucose deprivation/reperfusion(OGD/R) injury in PC12 cells from the perspective of ferroptosis. OGD/R was induced in vitro, and 12 h after ligustilide addition during reperfusion, cell viability was detected by cell counting kit-8(CCK-8) assay. DCFH-DA staining was used to detect the level of intracellular reactive oxygen species(ROS). Western blot was employed to detect the expression of ferroptosis-related proteins, glutathione peroxidase 4(GPX4), transferrin receptor 1(TFR1), and solute carrier family 7 member 11(SLC7A11), and ferritinophagy-related proteins, nuclear receptor coactivator 4(NCOA4), ferritin heavy chain 1(FTH1), and microtubule-associated protein 1 light chain 3(LC3). The fluorescence intensity of LC3 protein was analyzed by immunofluorescence staining. The content of glutathione(GSH), malondialdehyde(MDA), and Fe was detected by chemiluminescent immunoassay. The effect of ligustilide on ferroptosis was observed by overexpression of NCOA4 gene. The results showed that ligustilide increased the viability of PC12 cells damaged by OGD/R, inhibited the release of ROS, reduced the content of Fe and MDA and the expression of TFR1, NCOA4, and LC3, and improved the content of GSH and the expression of GPX4, SLC7A11, and FTH1 compared with OGD/R group. After overexpression of the key protein NCOA4 in ferritinophagy, the inhibitory effect of ligustilide on ferroptosis was partially reversed, indicating that ligustilide may alleviate OGD/R injury of PC12 cells by blocking ferritinophagy and then inhibiting ferroptosis. The mechanism by which ligustilide reduced OGD/R injury in PC12 cells is that it suppressed the ferroptosis involved in ferritinophagy.

Report: Bacterial susceptibility and resistance analysis of traumatic osteomyelitis.

With the rapid development of industry, agriculture and transportation, the high energy trauma happened accordingly, thus greatly increased the incidence of traumatic osteomyelitis. The clinical traumatic osteomyelitis was mainly the local bone tissue inflammation caused by bacteria infection as trauma or iatrogenic causes. The delaying recovery could cause bone defection or bone nonunion. The purpose of this paper was to contribute new reference for the clinical prevention and treatment through tremendous of disease-causing bacteria susceptibility and resistance analysis of osteomyelitis.

Clinical curative effect observation of therapy of Chinese drug iontophoresis in treatment of degenerative osteoarthropathy.

Degenerative osteoarthropathy is a kind of arthrosis induced by various factors, with main pathological feature of articular cartilage and syndesmophyte formation. In recent years, its morbidity increases year by year and tend to appear more among young people. Its curative effect has yet to be improved. This paper mainly discussed the clinical curative effect of therapy of Chinese drug iontophoresis in degenerative osteoarthropathy. A total of 296 cases of degenerative osteoarthropathy was randomly divided into two groups (with no consideration on gender): Chinese drug iontophoresis group: joint was treated by therapy of Chinese drug iontophoresis and MTZ-F experiment; frequency electrotherapy group: joint was only treated by medium frequency electrotherapy. Two groups were both treated for 30 min for one time, 1 time for a day, total for 4 weeks. Result of the study found that, total effective rate of medium frequency electrotherapy group was 74.3%, Chinese medicine iontophoresis group was 93.2%; curative effect of Chinese medicine iontophoresis group was superior to electrotherapy group. It indicates that, Chinese medicine iontophoresis has good clinical effect in the treatment of osteoarthropathy and deserves to be popularized and applied.

[Impact of PTTG1 downregulation on cell proliferation, cell cycle and cell invasion of osteosarcoma and related molecular mechanisms].

OBJECTIVE: To downregulate the expression of pituitary tumor transforming gene 1 (PTTG1) in osteosarcoma (OS) cells by siRNA technology and to investigate related biological impact on cell proliferation, cell cycle and cell invasion of OS. METHODS: Three OS cell lines and osteoblast hFOB1.19 cell line were used in this study. Control siRNA and PTTG1 siRNA were employed to transfect OS U2OS cells, and PTTG1 protein level was detected by Western blot after the transfection. Effects of PTTG1 siRNA on cell proliferation, cell cycle and cell invasion were investigated by CCK-8, flow cytometry and Boyden chamber, respectively. Finally, activity of Akt and its downstream target gene expression were analyzed by Western blot in U2OS cells upon various treatments. RESULTS: Expression of PTTG1 protein in 3 OS cells (MG-63, SaOS-2 and U2OS) was significantly higher than that in osteoblast hFOB1.19, among which U2OS cells displayed the highest level. PTTG1 siRNA markedly downregulated the expression of PTTG1 protein in U2OS cells, leading to obvious inhibition of cell proliferation, altered cell cycle distribution and reduced ability of invasion of U2OS cells. Moreover, downregulation of PTTG1 reduced the expression of p-Akt (S473 and T308), MMP-2 and MMP-9 proteins, along with enhanced expression of p21 and E-cadherin proteins. CONCLUSIONS: PTTG1 may be tightly linked to the development of OS and therefore may serve as a novel target for precision therapy of OS.

Human Disturbance Increases Health Risks to Golden Snub-Nosed Monkeys and the Transfer Risk of Pathogenic Antibiotic-Resistant Bacteria from Golden Snub-Nosed Monkeys to Humans.

From the perspective of interactions in the human-animal-ecosystem, the study and control of pathogenic bacteria that can cause disease in animals and humans is the core content of "One Health". In order to test the effect of human disturbance (HD) on the health risk of pathogenic antibiotic-resistant bacteria (PARBs) to wild animals and transfer risk of the PARBs from wild animals to humans, golden snub-nosed monkeys (Rhinopithecus roxellana) were used as sentinel animals. Metagenomic analysis was used to analyze the characteristics of PARBs in the gut microbiota of golden snub-nosed monkeys. Then, the total contribution of antibiotic resistance genes (ARGs) and virulence factors (VFs) of the PARBs were used to assess the health risk of PARBs to golden snub-nosed monkeys, and the antimicrobial drug resistance and bacterial infectious disease of PARBs were determined to assess the transfer risk of PARBs from golden snub-nosed monkeys to humans. There were 18 and 5 kinds of PARBs in the gut microbiota of golden snub-nosed monkeys under HD (HD group) and wild habitat environments (W group), respectively. The total health risks of PARBs to the W group and the HD group were -28.5 × 10-3 and 125.8 × 10-3, respectively. There were 12 and 16 kinds of KEGG pathways of human diseases in the PARBs of the W group and the HD group, respectively, and the gene numbers of KEGG pathways in the HD group were higher than those in the W group. HD increased the pathogenicity of PARBs to golden snub-nosed monkeys, and the PARBs in golden snub-nosed monkeys exhibited resistance to lincosamide, aminoglycoside, and streptogramin antibiotics. If these PARBs transfer from golden snub-nosed monkeys to humans, then humans may acquire symptoms of pathogens including Tubercle bacillus, Staphylococcus, Streptococcus, Yersinia, Pertussis, and Vibrio cholera.

An exploration of facilitators and barriers to patient navigator core functions with breast cancer patients: Implications for the development of a human-centered mHealth app.

Objectives: To understand the barriers to core functions and workflow among patient navigators (PN) who navigate people diagnosed with breast cancer (BC). To identify how a mobile health (mHealth) app could assist PNs in providing care to BC patients. Methods: This qualitative research study used purposive sampling to recruit stakeholders (N = 33) from January to August 2021. We conducted individual semi-structured interviews with PNs (n = 11), oncology care providers (n = 12), and BC patients (n = 10). We used conventional content analysis to analyze the interview data. Results: Participants identified the following sociotechnical systems barriers in PN workflows that negatively impact BC patient care: 1) resources, 2) insurance coverage, 3) communication challenges, and 4) impact of logistical tasks. Participants identified the user experience, app features, and interoperability customizations to enhance PNs' provision of patient care as important design elements to include in a mHealth app. Conclusion: Feedback from stakeholders provided valuable insights into key design considerations, functions, and content areas for developing a mHealth app for PN use in BC care delivery. Innovation: This is one of the first studies to incorporate the human-centered design and sociotechnical systems frameworks to understand barriers to PN workflow and provision of BC patient care across the cancer care continuum.

[Development and clinical application of a new transverse process retractor based on computer-aided design and 3D printing technology].

OBJECTIVE: To manufacture a new type of transverse process retractor by using computer-aided design(CAD) combined with 3D printing technology and investigate its clinical application effect. METHODS: A new type of transverse protrusion retractor was developed by CAD combined with 3D printing technology. From September 2018 to September 2019, the new transverse process retractor was applied in clinic. Sixty patients with lumbar single segment lesions who needed treatment by pedicle screw fixation, bone grafting and interbody fusion were divided into new transverse process retractor group and control group, with 30 cases in each group. There were 14 males and 16 females in new type transverse process retractor group, the age was (68.0±4.3) years old on average; lesion segment of 8 cases were L3,4, 9 cases were L4,5, 13 cases were L5S1;5 cases of lumbar disc herniation, 20 cases of lumbar spinal stenosis, 5 cases of degenerative lumbar spondylolisthesis;new transverse process retractor was used to pedicle screw placement. While there were 15 males and 15 females in control group, with an average age of (69.2±4.5) years old;lesion segment of 8 cases were L3,4, 10 cases were L4,5, 12 cases were L5S1;5 cases of lumbar disc herniation, 21 cases of lumbar spinal stenosis, 4 cases of degenerative lumbar spondylolisthesis;the traditional lamina retractor was used for soft tissue pulling and finished pedicle screw placement by freehand. The length of surgical incision, the time required for inserting a single screw, fluoroscopy times, the times of adjusting the positioning needle or screw in insertion process, and the visual analogue scale (VAS) of surgical incision 72 hours after operation were compared between two groups. RESULTS: Using CAD and 3D printing technology, a new type of transverse protrusion retractor was developed quickly. The length of surgical incision, the time required for inserting a single screw, fluoroscopy time, and the times of adjusting the positioning needle or screw in insertion process in new transverse process retractor group were less than those in control group(P<0.05). There was no significant difference in VAS of lumbar incision pain at 72 hours after operation between two groups(P>0.05). CONCLUSION: Using CAD combined with 3D printing technology to develop a new transverse protrusion retractor has the advantages of convenient design, short development cycle and low cost. It provides a new idea for the research and development of new medical devices. The new transverse process retractor has the advantages of easy operation, reliable fixation, less damage to paravertebral muscle, convenient pedicle screw placement, reducing fluoroscopy time and so on.

Germline Mutational Landscape in Chinese Patients With Advanced Breast Cancer.

Background: Genetic testing for breast cancer (BC) patients may shift the paradigm towards more personalized management and treatment strategies. While gene alterations may be ethnic-specific in breast cancer, our understanding of genetic epidemiology of BC remains mainly driven by data from Caucasian populations and further limited to selected handful of genes. Methods: We collected whole blood samples from 356 BC patients at metastatic first line BC and primary stage IV disease at Beijing Cancer Hospital between Jan. 2013 to Dec. 2019. A comprehensive 600-gene cancer panel was used to detect germline variants in the covered genes with a median 300x sequencing depth. Variants were classified into pathogenic, likely pathogenic, variant of uncertain significance, likely benign and benign groups according to the ACMG/AMP Standards and Guidelines. Pathogenic and likely pathogenic variants were considered as deleterious mutations. Results: The median age of 356 BC patients was 49 years (range, 21-87 years) at the first diagnosis of BC. Deleterious germline mutations across 48 cancer-related genes were identified in 21.6% (77/356) of the patients. The most prevalent mutations were BRCA1/2 mutations (7.0%), followed by ATM and RAD50 mutations (1.4% each). In addition, patients with family history were more likely to carry BRCA1 mutations (P=0.04). Moreover, patients with triple-negative breast cancer (TNBC) were more likely to harbor BRCA1 mutations than those with HR+ or HER2+ breast cancer (P=0.006). While there was no significant survival difference observed in BRCA1/2 carriers relative to non-carriers, patients with DNA damage repair (DDR) gene mutations (mostly frequently BRCA, ATM, RAD50) had worse disease-free survival (P=0.02). Conclusions: The most prevalent germline mutations in a large cohort of Chinese patients with advanced BC were BRCA1/2 mutations, followed by ATM and RAD50 mutations. In total, approximately 16.0% (57/356) of patients carry deleterious mutations in DDR pathway. Patients with breast or ovarian cancer family history were more likely to carry BRCA1/2 mutations, and ones with DDR mutations had worse survival. These findings suggest that DDR mutations are prevalent in Chinese BC patients who may potentially benefit from treatment with Poly (ADP-ribose) polymerase inhibitors.

Lipoxin A4 protects primary spinal cord neurons from Erastin-induced ferroptosis by activating the Akt/Nrf2/HO-1 signaling pathway.

Ferroptosis is an iron-dependent programmed cell death, which participates in the pathogenesis of spinal cord injury (SCI). Our previous study has revealed that Lipoxin A4 (LXA4) exerts a protective role in SCI. Here, we investigated whether LXA4 can protect SCI through inhibiting neuronal ferroptosis. We treated primary spinal cord neurons with Erastin (ferroptosis activator) to induce ferroptosis. Erastin treatment reduced cell viability and enhanced cell death of primary spinal cord neurons, which was rescued by ferrostatin-1 (ferroptosis inhibitor). Moreover, Erastin repressed glutathione peroxidase 4 (GPX4) expression and the levels of glutathione and cysteine in primary spinal cord neurons. Erastin also enhanced the expression of ferroptosis biomarkers (PTGS2 and ACSL4) and the levels of reactive oxygen species (ROS) in primary spinal cord neurons. The influence conferred by Erastin was effectively abolished by LXA4 treatment. Furthermore, LXA4 enhanced the protein expression of p-AKT, nuclear factor (erythroid-derived 2)-like 2 (Nrf2) and haem-oxygenase-1 (HO-1) in primary spinal cord neurons. LXA4-mediated inhibition of ferroptosis of primary spinal cord neurons was prohibited by LY294002 (AKT inhibitor), brusatol (Nrf2 inhibitor) or zinc protoporphyrin (HO-1 inhibitor). In conclusion, this work demonstrated that LXA4 exerted a neuroprotective effect in Erastin-induced ferroptosis of primary spinal cord neurons by activating the Akt/Nrf2/HO-1 signaling pathway. Thus, this work provides novel insights into the mechanisms of action of LXA4 in ferroptosis of primary spinal cord neurons and indicates that LXA4 may be a potential therapeutic agent for SCI.

Wireless Microfluidic Sensor for Metal Ion Detection in Water.

In the present work, a wireless microfluidic sensor based on low-temperature cofired ceramic (LTCC) technology for real-time detection of metal ions in water is proposed. The wireless sensor is composed of a planar spiral inductor and parallel plate capacitor (LC) resonant antenna, which integrates with the microchannel in the LTCC substrate between the capacitor plates. Aqueous solutions of Pb(NO3)2, Cd(NO3)2, Mg(NO3)2, Ca(NO3)2, NaNO3, and KNO3 with concentrations of 0-100 mM were tested with the sensors. The metal ion and its concentration in water can be tested by the amplitude of the reflection coefficient (S 11) and the resonance frequency (f r) of the wireless microfluidic sensor. The metal ion species can be distinguished from the wireless response behavior of the sensor. The detection limit of the sensor for the selected metal ionic solutions could reach as low as 5 µM. The normalized sensitivity of the sensor is 0.47%, which is higher than that of the reported liquid microfluidic sensors based on microwave resonators. The wireless microfluidic sensor of this study is promising for rapid and convenient detection of heavy metal ion pollutants in the industrial wastewater.

Odor coding in the maxillary palp of the malaria vector mosquito Anopheles gambiae.

BACKGROUND: Many species of mosquitoes, including the major malaria vector Anopheles gambiae, utilize carbon dioxide (CO(2)) and 1-octen-3-ol as olfactory cues in host-seeking behaviors that underlie their vectorial capacity. However, the molecular and cellular basis of such olfactory responses remains largely unknown. RESULTS: Here, we use molecular and physiological approaches coupled with systematic functional analyses to define the complete olfactory sensory map of the An. gambiae maxillary palp, an olfactory appendage that mediates the detection of these compounds. In doing so, we identify three olfactory receptor neurons (ORNs) that are organized in stereotyped triads within the maxillary-palp capitate-peg-sensillum population. One ORN is CO(2)-responsive and characterized by the coexpression of three receptors that confer CO(2) responses, whereas the other ORNs express characteristic odorant receptors (AgORs) that are responsible for their in vivo olfactory responses. CONCLUSIONS: Our results describe a complete and highly concordant map of both the molecular and cellular olfactory components on the maxillary palp of the adult female An. gambiae mosquito. These results also facilitate the understanding of how An. gambiae mosquitoes sense olfactory cues that might be exploited to compromise their ability to transmit malaria.

[Activity of butenafine against ocular pathogenic filamentous fungi in vitro].

OBJECTIVE: To investigate antifungal activity of butenafine in comparison with that of natamycin, amphotericin B and fluconazole against ocular pathogenic filamentous fungi in vitro. METHODS: It was an experimental study. Susceptibility tests were performed against 260 isolates of ocular pathogenic filamentous fungi by broth dilution antifungal susceptibility test of filamentous fungi approved by the Clinical and Laboratory Standards Institute (CLSI) M38-A document. The isolates included Fusarium spp. (136), Aspergillus spp. (98), Alternaria alternata (9), Curvularia lunata (3), and unusual ocular pathogens (14). Final concentration ranged from 0.008 to 16.000 mg/L for butenafine, from 0.031 to 16.000 mg/L for amphotericin B and natamycin, and from 0.5 to 256.0 mg/L for fluconazole. Following incubation at 35 degrees C for 48 h, minimal inhibitory concentration (MIC) was determined according to the CLSI M38-A document. For amphotericin B and natamycin, the MIC was defined as the lowest drug concentration that prevented any discernible growth. For butenafine and fluconazole, the MIC was defined as the lowest concentration in which an approximately 75% reduction compared to the growth of the control was observed. Candida parapsilosis ATCC22019 was used as quality control strains to validated the results. Mean MIC and MIC range, the MIC at which 50% of the isolates tested were inhibited (MIC(50)) and the MIC at which 90% of the isolates tested were inhibited (MIC(90)), were provided for all the isolates tested by using descriptive statistical analysis with the statistical SPSS package (version 13.0). RESULTS: MIC(90) of butenafine, natamycin, amphotericin B and fluconazole were 4, 8, 2 and 512 mg/L for Fusarium spp., respectively; 0.063, 32.000, 2.000 and 256.000 mg/L for Aspergillus spp., respectively; 0.5, 8.0, 2.0 and 128.0 mg/L for Alternaria alternate, respectively; 0.125, 2.000, 0.500 and 4.000 mg/L for Curvularia lunata, respectively; and 1, 4, 1 and 256 mg/L for unusual ocular pathogens, respectively. CONCLUSIONS: Butenafine exhibits potent antifungal activity against a wide variety of ocular pathogenic fungi, especially for Aspergillus spp., Alternaria alternata, Curvularia lunata, and some unusual ocular pathogens and may have a role in future studies of antifungal eye drops and treating fungal keratitis.

[Experimental study of individualized 3D printing-guided template combined with thoracolumbar pedicle screw placement for the treatment of ankylosing spondylitis].

OBJECTIVE: To evaluate accuracy and safety of individualized 3D printing guided template for thoracolumbar pedicle screw placement in patients with ankylosing spondylitis. METHODS: From January 2016 to September 2019, thoracolumbar spine three-dimensional CT data of 8 patients with ankylosing spondylitis were included, Mimics 17.0 and ideaMaker computer software were applied to design thoracolumbar pedicle screw guided template of patients with AS, physical model of all patients (T10-L2)were printed by 3D printer, 2 parts in each patient, and divided into guide-plate-assisted screw group (experimental group) and free-hand nail group (control group). Thoracolumbar pedicle screws of both groups were placed by the same spinal surgeon. The accuracy of pedicle screw placement between two groups were evaluated according to results of postoperative CT, the accuracy of the fixation of thoracolumbar pedicle screw was divided into 4 grades, grade 0 and 1 screws were acceptable nails, grade 2 and 3 screws were unacceptable nails. The diameter and length of pedicle screws, the distance between entry point and posterior median line designed by preoperative 3D printing were compared with actual use in operation. RESULTS: Twenty three blocks of thoracolumbar 3D printing screw of ankylosing spondylitis guided templates were designed and printed in guide-plate-assisted screw group, 46 screws were inserted and 44 screws were accepted. The time of implanting a screw into thoracolumbar pedicle was (4.20±1.15) min, the frequency of X-ray was (5.00±1.25) times and the average adjustment times of screw and Kirschner needle during screw placement was (1.76±1.32) times. In the control group, 46 nails were placed by traditional surgical method and 30 screws were accepted. The time of implanting a screw into thoracolumbar pedicle was (14.67±2.23) min, the frequency of X-ray fluoroscopy was (14.46±2.21) times and the average times of Kirschner needle adjustment was (4.76±3.39) times. The success rates between experimental group and control group were 95.65%(44 / 46) and 56.22%(30 / 46) respectively, and had statistical difference (χ2=13.538, P<0.05). There was no significant difference in diameter, length of pedicle screws and the distance of posterior median line between virtual designed by 3D printing before operation and actual situation in opertaion (P>0.05). The operation time of inserting a single screw, the times of X-ray fluoroscopy, and the average times of adjustment screw and Kirschner needle in experimental group were significant less than those in control group(P<0.01). CONCLUSION: The personalized guide template assisted the thoracolumbar fixation designed by 3D printing could significantly improve safety, accuracy and efficiency of surgery, especially suitable for thoracolumbar vertebral bodies requiring posterior pedicle screw fixation for fracture or dislocation with AS.

[3D printing technology assisted the preoperative planning and application value in adult kyphoscoliosis deformity].

OBJECTIVE: To explore the application value of 3D printing technology in preoperative surgery plan and intraoperative auxiliary operation for adult kyphoscoliosis deformity. METHODS: The clinical data of 12 adult patients with kyphoscoliosis deformity treated from September 2017 to January 2019 were retrospectively analyzed. There were 3 males and 9 females, aged from 21 to 63 years old with an average of (47.67±13.32) years old. Among them, 4 cases were congenital kyphoscoliosis, 2 cases were old tuberculosis thoracolumbar kyphosis ; 2 cases were idiopathic kyphoscoliosis, 4 cases were degenerative kyphoscoliosis. The CT scan data of the patient's spine was imported into Mimics17.0 software to establish the three dimensional model of the spine, and the spine model was produced by 3D printer. Using the spine model simulated operation, preoperative surgery program planning and formulated a precise surgery, and further analysed postoperative imaging parameters improvement. All the patients were followed up for more than 1 year. Before and after operation and at the last follow-up, the scoliosis Cobb angle, maximum kyphosis Cobb angle, and coronal plane balance (distance between C 7 plumbline and center sacral vertical line, C7PL-CSVL), sagittal plane balance (sagittal vertical axis, SVA), pelvic parameters and other related imaging parameters were measured to further evaluate its orthopedic effect. RESULTS: Twelve patients with spine deformity were treated with different osteotomy and internal fixation fusion methods under the guidance of a 1∶1 spine model (pedicle screw placement of 4 patients with severe deformity were assisted by pedicle screw guide plates), nail placement and osteotomy have good effects, no major tissue damage such as blood vessels, nerves and spinal cord during and after surgery, no complications such as cerebrospinal fluid leakage and infection. Preoperative Cobb angle of scoliosis was (56.5±22.5) °, Cobb angle of kyphosis was (65.2±19.5) °, C7 PL-CSVL was (45.8±16.9) mm, SVA was (48.7±25.4) mm. Postoperative at 4 weeks, Cobb angle of scoliosis was (20.8±11.5) °, and Cobb angle of kyphosis was (22.0±6.6) °, with correction rates of (65.1±9.7)% and (64.6± 10.6)%, respectively ; C7 PL-CSVL was (22.3±8.9) mm, and SVA was (23.3±13.1) mm, all of which were significantly improved compared with preoperative results. The mean follow-up time was (18.5±7.9) months in 12 patients. At the last follow-up, the Cobb angles of scoliosis and kyphosis were (22.2±10.8) ° and (23.6±7.7) °, respectively, C7 PL-CSVL was (23.5±10.8) mm, and SVA was (24.7±12.5) mm. The results were statistically significant compared preoperative (P<0.05). There was no significant difference at the postoperative at 4 weeks and the last follow-up (P>0.05). CONCLUSION: The 3D print model can visually and clearly show the vertebral morphology and structure of adult kyphoscolisis and its spatial relationship with the adjacent vertebrae, blood vessels, and nerves, which provides a good and intuitive stereoscopic anatomical structure observation for the individualization of the surgical plan. Pre-simulation of operations to determine the internal fixation, fusion segment and osteotomy orthopedic way, may to provide a reference for actual clinical surgery, and can improve the accuracy and safety of surgery.

Anopheles gambiae TRPA1 is a heat-activated channel expressed in thermosensitive sensilla of female antennae.

Heat sensitivity is a sensory modality that plays a critical role in close-range host-seeking behaviors of adult female Anopheles gambiae, the principal Afrotropical vector for human malaria. An essential step in this activity is the ability to discriminate and respond to increases in environmental temperature gradients through the process of peripheral thermoreception. Here, we report on the characterization of the anopheline homolog of the transient receptor potential (TRP) A1/ANKTM1 channel that is consistent with its role as a heat-sensor in host-seeking adult female mosquitoes. We identify a set of distal antennal sensory structures that specifically respond to temperature gradients and express AgTRPA1. Functional characterization of AgTRPA1 in Xenopus oocytes supports its role in the molecular transduction of temperature gradients in An. gambiae, providing a basis for targeting mosquito heat responses as a means toward reducing malaria transmission.

[Comparison of the activities of silver nitrate with those of three antifungal agents against ocular pathogenic fungi in vitro].

OBJECTIVE: To investigate antifungal activity of silver nitrate compared with fluconazole, ketoconazole and amphotericin B against ocular pathogenic fungi in vitro. METHODS: It was an experimental study. Susceptibility tests were performed against 260 isolates (15 genera and 29 species) of ocular pathogenic fungi by broth dilution antifungal susceptibility testing of filamentous fungi (M38-A) approved by National Committee for Clinical Laboratory Standards (NCCLS). Final concentrations ranged from 0.031 to 16.000 mg/L for silver nitrate, ketoconazole and amphotericin B, from 0.5 - 256.0 mg/L for fluconazole. Minimum inhibitory concentration (MIC) was defined as the lowest drug concentration that showed absence of growth or complete growth inhibition (100%). The end points were determined as 100% growth inhibition for silver nitrate and amphotericin B, and > or = 75% growth inhibition for ketoconazole and fluconazole. RESULTS: The MICs at which 90% of isolates were inhibited (MIC(90)) of silver nitrate, ketoconazole, amphotericin B and fluconazole were 2.000, 512.000, 32.000 and 2.000 mg/L for Fusarium species, respectively; 1.000, 256.000, 2.000 and 2.000 mg/L for Aspergillus species, respectively; 2.000, 128.000, 4.000 and 2.000 mg/L for Alternaria alternate, respectively; 2.000, 4.000, 0.125 and 0.500 mg/L for Curvularia lunata, respectively; and 1.000, 256.000, 1.000 and 1.000 mg/L for unusual ocular pathogens, respectively. Silver nitrate was highly active against Aspergillus species (92.9% susceptible at a MIC of < or = 1.0 mg/L) and Fusarium species (96.3% susceptible at a MIC of < or = 2.0 mg/L). 95.6% of Fusarium species and 90.8% of Aspergillus species exhibited resistance to fluconazole, 44.1% of Fusarium species and 42.9% of Aspergillus species exhibited resistance to amphotericin B, 66.2% of Fusarium species exhibited resistance to ketoconazole. The activity of silver nitrate against the fluconazole-resistant, ketoconazole-resistant and amphotericin B-resistant strains was high. CONCLUSION: Silver nitrate has promising activity against a wide variety of ocular pathogenic fungi in vitro, and may have a role in future studies of antifungal eye drops and treating fungal keratitis.

Efficacy and safety of budesonide combined with pulmonary surfactant in the treatment of neonatal meconium aspiration syndrome:a systematic review / 药物流行病学杂志

Objective To evaluate the efficacy and safety of budesonide combined with pulmonary surfactant(PS)in the treatment of meconium aspiration syndrome(MAS)in neonates.Methods PubMed,Cochrane Central Register of Controlled Trials(Central),Embase,Web of Science,SinoMed,VIP,WanFang Data and CNKI databases were electronically searched to collect randomized controlled trials(RCTs)of budesonide combined with PS in the treatment of neonatal MAS from inception to September 2,2023.Two researchers independently screened literature,extracted data and assessed the risk of bias of the included studies,meta-analyses were performed by using the RevMan 5.4 software.Results A total of 6 RCTs involving 544 patients were included.The results of meta-analysis showed that compared with PS group,budesonide combined with PS group had higher overall effective rate(RR=1.29,95％CI 1.17 to 1.41,P＜0.001),shorter hospital stay(MD=-6.35,95％CI-9.25 to-3.46,P＜0.001)and shorter time of oxygen inhalation(MD=-1.61,95％CI-2.23 to-0.98,P＜0.001),shorter the duration of ventilator use(MD=-26.46,95％CI-35.98 to-16.95,P＜0.001),improved the blood gas analysis indexes at each time after treatment(P＜0.05);In terms of safety,the incidence of total complications and adverse reactions in budesonide combined with PS group was significantly lower(RR=0.35,95％CI 0.25 to 0.47,P＜0.001).Subgroup analysis showed that the incidence of persistent pulmonary hypertension of the newborn(PPHN)in the budesonide combined with PS group was decreased(RR=0.38,95％CI 0.19 to 0.74,P=0.004),and the incidence of pneumorrhagia was decreased(RR=0.26,95％CI 0.10 to 0.69,P=0.007),and the difference was statistically significant;the incidence of heart failure and sepsis was not statistically significant compared with the PS group(P＞0.05).Conclusion Current evidence shows that budesonide combined with PS in the treatment of neonatal meconium aspiration syndrome can improve the symptoms and signs of MAS children,improve the blood gas analysis index,accelerate disease rehabilitation,shorten the course of the disease,can help reduce the risk of complications and PPHN,pneumorrhagia,and doesn't increase the incidence of heart failure,sepsis.Due to the limited quantity of the included studies,more high-quality and large-sample RCTs are needed to further validate the above conclusions.

Effect of histone methylase EZH2 on proliferation and apoptosis of hypertrophic myocardial cells of AC16 / 国际生物医学工程杂志

Objective:To explore the molecular mechanism of the effect of the histone methylase zeste gene enhancer homolog 2 (EZH2) on the proliferation and apoptosis of human hypertrophic cardiomyocytes AC16.Methods:The AC16 hypertrophic cardiomyocyte model was constructed by adding angiotensin Ⅱ to the AC16 cell culture medium. The cells were divided into four groups, including the blank control group, the angiotensin Ⅱ group, the empty vector + angiotensin Ⅱ group, and the EZH2 overexpression + angiotensin Ⅱ group. The expression levels of EZH2 and brain natriuretic peptide ( BNP) genes were measured using fluorescent quantitative PCR. The EZH2, trimethylation of lysine at position 27 of histone H3 (H3K27me3), and BNP proteins expression were detected by Western Blot. The MTS method was used to detect the proliferation of AC16 cell. The Annexin V-FITC/PI double staining method was used to detect the apoptosis of AC16 cell. Results:Compared with the blank control group, the expression levels of EZH2 and H3K27me3 in the angiotensin Ⅱ group were decreased, the expression level of BNP was increased, cell proliferation was decreased, and apoptosis was increased (all P < 0.001). Compared with the empty vector + angiotensin Ⅱ group, the expression levels of EZH2 and H3K27me3 in the EZH2 overexpression + angiotensin Ⅱ group were increased, the expression level of BNP was decreased, the cell proliferation level was increased, and the apoptosis level was decreased (all P < 0.001). There was no significant difference between the angiotensin Ⅱ group and the empty vector + angiotensin Ⅱ group (all P > 0.05). Conclusions:Histone methylase EZH2 has an effect on the proliferation and apoptosis of AC16 cell, providing a reference for the treatment of myocardial hypertrophy and revealing the exact pathogenesis of myocardial hypertrophy.

Lipoxin A4 protects against spinal cord injury via regulating Akt/nuclear factor (erythroid-derived 2)-like 2/heme oxygenase-1 signaling.

Spinal cord injury (SCI) is a devastating physical trauma worldwide. The mechanisms of SCI are still not clear and the effective treatment is limited. Lipoxin A4 (LXA4) possesses anti-inflammatory and neuroprotective effects. The present study was designed to further evaluate the molecular mechanisms of LXA4-induced protective effects in a rat model of SCI. We found that LXA4 increased Basso, Beattie and Bresnahan (BBB) scores, increased mechanical paw withdrawal threshold (PWT) and paw withdrawal latency (PWL) to a radiant heat, reduced the lesion volume, decreased Bax mRNA expression and increased Bcl-2 expression after SCI. The phosphorylation of Akt and protein expression of Nrf2 and HO-1 were reduced after SCI. LXA4 treatment significantly inhibited the reduction of Akt phosphorylation and Nrf2 and HO-1 protein expression. Injection of LY294002 notably inhibited the phosphorylation of Akt, and the expression of total Akt and Nrf2 and HO-1 after SCI in LXA4-treated rats. LY294002 prohibited LXA4-induced effects after SCI. shNrf2 injection markedly decreased both Nrf2 and HO-1 expression in LXA4-treated rats after SCI. ZnPP notably decreased HO-1 expression but did not markedly affect Nrf2 expression. shNrf2 and ZnPP prohibited LXA4-induced increase of BBB scores, and PWT and PWL, decrease of lesion volume of spinal cord, reduction of Bax expression and increase of Bcl-2 expression. The results indicate that LXA4 protects against SCI through Akt/Nrf2/HO-1 signaling. The data provide novel insights into the mechanisms of LXA4-mediated neuprotective effects against SCI and suggest that LXA4 may be a potential therapeutic agent for SCI and its associated complications.

Does radiation therapy affect adhesion of tricalcium silicate cements to root dentin?

Abstract Objective This study aimed to analyze the effect of irradiation on the push-out bond strength of mineral trioxide aggregate (MTA) and Biodentine to radicular dentin. Methodology A total of 60 extracted mature human teeth with single root canals were categorized into two groups (irradiated and non-irradiated) (n=30). Each group was further divided into two sub-groups based on cements used (Biodentine and MTA). Then, a cumulative radiation dose of 60 Gy was divided into 30 fractions (two Gy for every fraction) and administered for five successive days per week over six weeks. Obturation was then performed using MTA and Biodentine. Afterwards, 1.5 mm thick horizontal sections were procured from the middle one-third of all the specimens and then subjected to push-out bond test. Results were analyzed using one-way analysis of variance with post-hoc Tukey's test. Results The bond strength of Biodentine and MTA to irradiated teeth was lower than non-irradiated teeth. Highest push-out bond strength was observed in non-irradiated specimens filled with Biodentine (p=0), followed by irradiated specimens filled with Biodentine (p=0); non-irradiated specimens filled with MTA (p=0); and irradiated specimens filled with MTA (p=0.9). Conclusion The push-out bond strength of Biodentine and MTA to root canal dentin decreased significantly post irradiation.