ABSTRACT
Aneuploidy, which refers to unbalanced chromosome numbers, represents a class of genetic variation that is associated with cancer, birth defects and eukaryotic micro-organisms1-4. Whereas it is known that each aneuploid chromosome stoichiometry can give rise to a distinct pattern of gene expression and phenotypic profile4,5, it remains a fundamental question as to whether there are common cellular defects that are associated with aneuploidy. Here we show the existence in budding yeast of a common aneuploidy gene-expression signature that is suggestive of hypo-osmotic stress, using a strategy that enables the observation of common transcriptome changes of aneuploidy by averaging out karyotype-specific dosage effects in aneuploid yeast-cell populations with random and diverse chromosome stoichiometry. Consistently, aneuploid yeast exhibited increased plasma-membrane stress that led to impaired endocytosis, and this defect was also observed in aneuploid human cells. Thermodynamic modelling showed that hypo-osmotic-like stress is a general outcome of the proteome imbalance that is caused by aneuploidy, and also predicted a relationship between ploidy and cell size that was observed in yeast and aneuploid cancer cells. A genome-wide screen uncovered a general dependency of aneuploid cells on a pathway of ubiquitin-mediated endocytic recycling of nutrient transporters. Loss of this pathway, coupled with the endocytic defect inherent to aneuploidy, leads to a marked alteration of intracellular nutrient homeostasis.
Subject(s)
Aneuploidy , Osmotic Pressure , Proteome/genetics , Proteome/metabolism , Saccharomyces cerevisiae/cytology , Saccharomyces cerevisiae/genetics , Stress, Physiological , Cell Membrane/metabolism , Cell Membrane/pathology , DNA-Binding Proteins/metabolism , Endocytosis , Endosomal Sorting Complexes Required for Transport/metabolism , Homeostasis , Humans , Karyotype , Saccharomyces cerevisiae/metabolism , Saccharomyces cerevisiae Proteins/metabolism , Thermodynamics , Transcription Factors/metabolism , Transcriptome/genetics , Ubiquitin/metabolism , Ubiquitin-Protein Ligase Complexes/metabolismABSTRACT
Skeletal muscle atrophy is a well-known consequence of spaceflight. Because of the potential significant impact of muscle atrophy and muscle dysfunction on astronauts and their mission, a thorough understanding of the mechanisms of this atrophy and the development of effective countermeasures is critical. Spaceflight-induced muscle atrophy is similar to atrophy seen in many terrestrial conditions, and therefore our understanding of this form of atrophy may also contribute to the treatment of atrophy in humans on Earth. The unique environmental features humans encounter in space include the weightlessness of microgravity, space radiation, and the distinctive aspects of living in a spacecraft. The disuse and unloading of muscles in microgravity are likely the most significant factors that mediate spaceflight-induced muscle atrophy and have been extensively studied and reviewed. However, there are numerous other direct and indirect effects on skeletal muscle that may be contributing factors to the muscle atrophy and dysfunction seen as a result of spaceflight. This review offers a novel perspective on the issue of muscle atrophy in space by providing a comprehensive overview of the unique aspects of the spaceflight environment and the various ways in which they can lead to muscle atrophy. We systematically review the potential contributions of these different mechanisms of spaceflight-induced atrophy and include findings from both actual spaceflight and ground-based models of spaceflight in humans, animals, and in vitro studies.
Subject(s)
Space Flight , Weightlessness , Animals , Muscle, Skeletal/pathology , Muscular Atrophy/etiology , Muscular Atrophy/pathology , Weightlessness/adverse effectsABSTRACT
The ability of cells to sense and respond to mechanical cues from the surrounding environment has been implicated as a key regulator of cell differentiation, migration, and proliferation. The extracellular matrix (ECM) is an oft-overlooked component of the interface between cells and their surroundings. Cells assemble soluble ECM proteins into insoluble fibrils with unique mechanical properties that can alter the mechanical cues a cell receives. In this study, we construct a model that predicts the dynamics of cellular traction force generation and subsequent assembly of fibrils of the ECM protein fibronectin (FN). FN fibrils are the primary component in primordial ECM and, as such, FN assembly is a critical component in the cellular mechanical response. The model consists of a network of Hookean springs, each representing an extensible domain within an assembling FN fibril. As actomyosin forces stretch the spring network, simulations predict the resulting traction force and FN fibril formation. The model accurately predicts FN fibril morphometry and demonstrates a mechanism by which FN fibril assembly regulates traction force dynamics in response to mechanical stimuli and varying surrounding substrate stiffness.
Subject(s)
Actomyosin/metabolism , Extracellular Matrix/metabolism , Fibronectins/metabolism , Mechanotransduction, Cellular/physiology , Models, Biological , Computer Simulation , Elasticity , Nonlinear Dynamics , Stochastic ProcessesABSTRACT
While the effects of microgravity on inducing skeletal muscle atrophy have been extensively studied, the impacts of microgravity on myogenesis and its mechanisms remain unclear. In this study, we developed a microphysiological system of engineered muscle tissue (EMT) fabricated using a collagen / Matrigel composite hydrogel and murine skeletal myoblasts. This 3D EMT model allows non-invasive quantitative assessment of contractile function. After applying a 7-day differentiation protocol to induce myotube formation, the EMTs clearly exhibited sarcomerogenesis, myofilament formation, and synchronous twitch and tetanic contractions with electrical stimuli. Using this 3D EMT system, we investigated the effects of simulated microgravity at 10-3 G on myogenesis and contractile function utilizing a random positioning machine. EMTs cultured for 5 days in simulated microgravity exhibited significantly reduced contractile forces, myofiber size, and differential expression of muscle contractile, myogenesis regulatory, and mitochondrial biogenesis-related proteins. These results indicate simulated microgravity attenuates myogenesis, resulting in impaired muscle function.
ABSTRACT
The growing interest in bioengineering in-vivo-like 3D functional tissues has led to novel approaches to the biomanufacturing process as well as expanded applications for these unique tissue constructs. Microgravity, as seen in spaceflight, is a unique environment that may be beneficial to the tissue-engineering process but cannot be completely replicated on Earth. Additionally, the expense and practical challenges of conducting human and animal research in space make bioengineered microphysiological systems an attractive research model. In this review, published research that exploits real and simulated microgravity to improve the biomanufacturing of a wide range of tissue types as well as those studies that use microphysiological systems, such as organ/tissue chips and multicellular organoids, for modeling human diseases in space are summarized. This review discusses real and simulated microgravity platforms and applications in tissue-engineered microphysiological systems across three topics: 1) application of microgravity to improve the biomanufacturing of tissue constructs, 2) use of tissue constructs fabricated in microgravity as models for human diseases on Earth, and 3) investigating the effects of microgravity on human tissues using biofabricated in vitro models. These current achievements represent important progress in understanding the physiological effects of microgravity and exploiting their advantages for tissue biomanufacturing.
Subject(s)
Weightlessness , Animals , Humans , Tissue Engineering , Organoids , Microphysiological SystemsABSTRACT
Cell migration on soft surfaces occurs in both physiological and pathological processes such as corticogenesis during embryonic development and cancer invasion and metastasis. The Arp2/3 complex in neural progenitor cells was previously demonstrated to be necessary for cell migration on soft elastic substrate but not on stiff surfaces, but the underlying mechanism was unclear. Here, we integrate computational and experimental approaches to elucidate how the Arp2/3 complex enables cell migration on soft surfaces. We found that lamellipodia comprised of a branched actin network nucleated by the Arp2/3 complex distribute forces over a wider area, thus decreasing stress in the substrate. Additionally, we found that interactions between parallel focal adhesions within lamellipodia prolong cell-substrate interactions by compensating for the failure of neighboring adhesions. Together with decreased substrate stress, this leads to the observed improvements in migratory ability on soft substrates in cells utilizing lamellipodia-dependent mesenchymal migration when compared with filopodia-based migration. These results show that the Arp2/3 complex-dependent lamellipodia provide multiple distinct mechanical advantages to gliomas migrating on soft 2D substrates, which can contribute to their invasive potential.
Subject(s)
Actin-Related Protein 2-3 Complex , Glioma , Humans , Actin-Related Protein 2-3 Complex/metabolism , Cell Movement , Actins/metabolism , Focal Adhesions/metabolism , Glioma/metabolism , Pseudopodia/metabolismABSTRACT
hiPSC-CMs are being considered by the Food and Drug Administration and other regulatory agencies for in vitro cardiotoxicity screening to provide human-relevant safety data. Widespread adoption of hiPSC-CMs in regulatory and academic science is limited by the immature, fetal-like phenotype of the cells. Here, to advance the maturation state of hiPSC-CMs, we developed and validated a human perinatal stem cell-derived extracellular matrix coating applied to high-throughput cell culture plates. We also present and validate a cardiac optical mapping device designed for high-throughput functional assessment of mature hiPSC-CM action potentials using voltage-sensitive dye and calcium transients using calcium-sensitive dyes or genetically encoded calcium indicators (GECI, GCaMP6). We utilize the optical mapping device to provide new biological insight into mature chamber-specific hiPSC-CMs, responsiveness to cardioactive drugs, the effect of GCaMP6 genetic variants on electrophysiological function, and the effect of daily ß-receptor stimulation on hiPSC-CM monolayer function and SERCA2a expression.
ABSTRACT
Heart disease is one of the largest burdens to human health worldwide and has very limited therapeutic options. Engineered three-dimensional (3D) vascularized cardiac tissues have shown promise in rescuing cardiac function in diseased hearts and may serve as a whole organ replacement in the future. One of the major obstacles in reconstructing these thick myocardial tissues to a clinically applicable scale is the integration of functional vascular networks capable of providing oxygen and nutrients throughout whole engineered constructs. Without perfusion of oxygen and nutrient flow throughout the entire engineered tissue not only is tissue viability compromised, but also overall tissue functionality is lost. There are many supporting technologies and approaches that have been developed to create vascular networks such as 3D bioprinting, co-culturing hydrogels, and incorporation of soluble angiogenic factors. In this state-of-the-art review, we discuss some of the most current engineered vascular cardiac tissues reported in the literature and future directions in the field. Impact statement The field of cardiac tissue engineering is rapidly evolving and is now closer than ever to having engineered tissue models capable of predicting preclinical responses to therapeutics, modeling diseases, and being used as a means of rescuing cardiac function following injuries to the native myocardium. However, a major obstacle of engineering thick cardiac tissue remains to be the integration of functional vasculature. In this review, we highlight seminal and recently published works that have influenced and pushed the field of cardiac tissue engineering toward achieving vascularized functional tissues.
Subject(s)
Bioprinting , Bioprinting/methods , Humans , Hydrogels , Myocardium , Oxygen , Tissue Engineering/methodsABSTRACT
Poly(dimethylsiloxane) (PDMS) is a commonly used polymer in organ-on-a-chip devices and microphysiological systems. However, due to its hydrophobicity and permeability, it absorbs drug compounds, preventing accurate drug screening applications. Here, we developed an effective and facile method to prevent the absorption of drugs by utilizing a PDMS-PEG block copolymer additive and drug pretreatment. First, we incorporated a PDMS-PEG block copolymer into PDMS to address its inherent hydrophobicity. Next, we addressed the permeability of PDMS by eliminating the concentration gradient via pretreatment of the PDMS with the drug prior to experimentally testing drug absorption. The combined use of a PDMS-PEG block copolymer with drug pretreatment resulted in a mean reduction of drug absorption by 91.6% in the optimal condition. Finally, we demonstrated that the proposed method can be applied to prevent drug absorption in a PDMS-based cardiac microphysiological system, enabling more accurate drug studies.
Subject(s)
Dimethylpolysiloxanes , Polymers , Drug Evaluation, Preclinical , Hydrophobic and Hydrophilic Interactions , PermeabilityABSTRACT
Research in low Earth orbit (LEO) has become more accessible. The 2020 Biomanufacturing in Space Symposium reviewed space-based regenerative medicine research and discussed leveraging LEO to advance biomanufacturing for regenerative medicine applications. The symposium identified areas where financial investments could stimulate advancements overcoming technical barriers. Opportunities in disease modeling, stem-cell-derived products, and biofabrication were highlighted. The symposium will initiate a roadmap to a sustainable market for regenerative medicine biomanufacturing in space. This perspective summarizes the 2020 Biomanufacturing in Space Symposium, highlights key biomanufacturing opportunities in LEO, and lays the framework for a roadmap to regenerative medicine biomanufacturing in space.
Subject(s)
Biocompatible Materials , Extraterrestrial Environment , Manufactured Materials , Regenerative Medicine , Artificial Intelligence , Automation , Bioengineering , Humans , Machine Learning , ResearchABSTRACT
Migration of meiosis-I (MI) spindle from the cell center to a sub-cortical location is a critical step for mouse oocytes to undergo asymmetric meiotic cell division. In this study, we investigate the mechanism by which formin-2 (FMN2) orchestrates the initial movement of MI spindle. By defining protein domains responsible for targeting FMN2, we show that spindle-periphery localized FMN2 is required for spindle migration. The spindle-peripheral FMN2 nucleates short actin bundles from vesicles derived likely from the endoplasmic reticulum (ER) and concentrated in a layer outside the spindle. This layer is in turn surrounded by mitochondria. A model based on polymerizing actin filaments pushing against mitochondria, thus generating a counter force on the spindle, demonstrated an inherent ability of this system to break symmetry and evolve directional spindle motion. The model is further supported through experiments involving spatially biasing actin nucleation via optogenetics and disruption of mitochondrial distribution and dynamics.
Subject(s)
Actins/metabolism , Meiosis , Oocytes/cytology , Organelles/metabolism , Spindle Apparatus/metabolism , Animals , Asymmetric Cell Division , Cytoplasmic Vesicles/metabolism , Endoplasmic Reticulum/metabolism , Female , Formins/chemistry , Formins/genetics , Formins/metabolism , Mice , Mitochondria/metabolism , Models, Biological , Nerve Tissue Proteins/chemistry , Nerve Tissue Proteins/genetics , Nerve Tissue Proteins/metabolism , Oocytes/metabolism , Protein Domains , Sequence DeletionABSTRACT
High-grade gliomas are especially difficult tumors to treat due to their invasive behavior. This has led to extensive research focusing on arresting glioma cell migration. Cell migration involves the sensing of a migratory cue, followed by polarization in the direction of the cue, and reorganization of the actin cytoskeleton to allow for a protrusive leading edge and a contractile trailing edge. Transmission of these forces to produce motility also requires adhesive interactions of the cell with the extracellular microenvironment. In glioma cells, transmembrane receptors such as CD44 and integrins bind the cell to the surrounding extracellular matrix that provides a substrate on which the cell can exert the requisite forces for cell motility. These various essential parts of the migratory machinery are potential targets to halt glioma cell invasion. In this review, we discuss the mechanisms of glioma cell migration and how they may be targeted in anti-invasion therapies.
Subject(s)
Brain/pathology , Cell Movement , Glioma/pathology , Animals , Humans , Models, Biological , Neoplasm Grading , Neoplasm InvasivenessABSTRACT
Cells respond to mechanical cues from the substrate to which they are attached. These mechanical cues drive cell migration, proliferation, differentiation, and survival. Previous studies have highlighted three specific mechanisms through which substrate stiffness directly alters cell function: increasing stiffness drives (1) larger contractile forces; (2) increased cell spreading and size; and (3) altered nuclear deformation. While studies have shown that substrate mechanics are an important cue, the role of the extracellular matrix (ECM) has largely been ignored. The ECM is a crucial component of the mechanosensing system for two reasons: (1) many ECM fibrils are assembled by application of cell-generated forces, and (2) ECM proteins have unique mechanical properties that will undoubtedly alter the local stiffness sensed by a cell. We specifically focused on the role of the ECM protein fibronectin (FN), which plays a critical role in de novo tissue production. In this study, we first measured the effects of substrate stiffness on human embryonic fibroblasts by plating cells onto microfabricated pillar arrays (MPAs) of varying stiffness. Cells responded to increasing substrate stiffness by generating larger forces, spreading to larger sizes, and altering nuclear geometry. These cells also assembled FN fibrils across all stiffnesses, with optimal assembly occurring at approximately 6 kPa. We then inhibited FN assembly, which resulted in dramatic reductions in contractile force generation, cell spreading, and nuclear geometry across all stiffnesses. These findings suggest that FN fibrils play a critical role in facilitating cellular responses to substrate stiffness.