CVD Grown Tungsten Oxide for Low Temperature Hydrogen Sensing: Tuning Surface Characteristics via Materials Processing for Sensing Applications.

The intrinsic properties of semiconducting oxides having nanostructured morphology are highly appealing for gas sensing. In this study, the fabrication of nanostructured WO3 thin films with promising surface characteristics for hydrogen (H2 ) gas sensing applications is accomplished. This is enabled by developing a chemical vapor deposition (CVD) process employing a new and volatile tungsten precursor bis(diisopropylamido)-bis(tert-butylimido)-tungsten(VI), [W(Nt Bu)2 (Ni Pr2 )2 ]. The as-grown nanostructured WO3 layers are thoroughly analyzed. Particular attention is paid to stoichiometry, surface characteristics, and morphology, all of which strongly influence the gas-sensing potential of WO3 . Synchrotron-based ultraviolet photoelectron spectroscopy (UPS), X-ray photoelectron spectroscopy (XPS), X-ray photoelectron emission microscopy (XPEEM), low-energy electron microscopy (LEEM) and 4-point van der Pauw (vdP) technique made it possible to analyze the surface chemistry and structural uniformity with a spatially resolved insight into the chemical, electronic and electrical properties. The WO3 layer is employed as a hydrogen (H2 ) sensor within interdigitated mini-mobile sensor architecture capable of working using a standard computer's 5 V 1-wirebus connection. The sensor shows remarkable sensitivity toward H2 . The high, robust, and repeatable sensor response (S) is attributed to the homogenous distribution of the W5+ oxidation state and associated oxygen vacancies, as shown by synchrotron-based UPS, XPS, and XPEEM analysis.

Inverting the Electronic Structure of Diylidylgermylenes by Backbone Modification.

Owing to the strong electron-donating ability of ylide substituents, diylidyltetrylenes are usually highly nucleophilic species with strong donor capacities. Here, we demonstrate that their electronic properties are in fact highly flexible and can be effectively tuned through variation of the substituent in the ylide backbone. Initial density functional theory studies showed that cyano groups are particularly capable in lowering the LUMO energy of diylidyl germylenes thus turning these usually highly nucleophilic species into electrophilic compounds. This was confirmed by experimental studies. Attempts to synthesize the germylene (YCN )2 Ge [with YCN =Ph3 P-(C)-CN] from the corresponding metalated ylide YCN K selectively led to germanide [(YCN )3 Ge)K]2 thus reflecting the electrophilic nature of the intermediate formed germylene. XRD analysis of single crystals of (YCN )2 Ge - serendipitously obtained through protonative cleavage of one ylide from the germanide - revealed a monomeric structure with rather long Ge-ylide linkages, which corroborates well with a pure single bond and no stabilization of the empty pπ orbital at germanium through π bonding. The germanide exhibits methanide-like reactivity towards chalcogens but a likewise weak Ge-C bond as demonstrated by the insertion of carbon dioxide.

Thiophosphinoyl-Tethered Ylide-Substituted Heavier Carbenes: Synthesis, Structures and Stabilities.

The synthesis and structure analysis of a series of mono and diylide-substituted tetrylenes of type YEX and Y2 E (E=Ge, Sn, Pb; X=Cl or Br) using a thiophosphinoyl-tethered metallated ylide (Y=Ph2 P(S)-C-P(pip)Ph2 with pip=piperidyl) is reported, amongst the first ylide-substituted plumbylenes. The tetrylenes feature distinct trends in the spectroscopic and structural properties of the ylide ligand with increasing atomic number of the tetrel element. For instance, an increasingly high-field shifted signal for the thiophosphinoyl group is observed in the 31 P{1 H} NMR spectrum as a consequence of the increasing polarity of the element-carbon bond, which likewise results in a shortening of the ylidic C-P bond in the solid-state structure. The diylidyltetrylenes are unstable towards transylidation forming the mono(ylide)tetrylenes when treated with the tetrel dihalides according to the stability trend: Y2 Pb

Tuning Ruthenium Carbene Complexes for Selective P-H Activation through Metal-Ligand Cooperation.

The use of iminophosphoryl-tethered ruthenium carbene complexes to activate secondary phosphine P-H bonds is reported. Complexes of type [(p-cymene)-RuC(SO2 Ph)(PPh2 NR)] (with R = SiMe3 or 4-C6 H4 -NO2 ) were found to exhibit different reactivities depending on the electronics of the applied phosphine and the substituent at the iminophosphoryl moiety. Hence, the electron-rich silyl-substituted complex undergoes cyclometallation or shift of the imine moiety after cooperative activation of the P-H bond across the M=C linkage, depending on the electronics of the applied phosphine. Deuteration experiments and computational studies proved that cyclometallation is initiated by the activation process at the M=C bond and triggered by the high electron density at the metal in the phosphido intermediates. Consistently, replacement of the trimethylsilyl (TMS) group by the electron-withdrawing 4-nitrophenyl substituent allowed the selective cooperative P-H activation to form stable activation products.

Synthesis of Low-Valent Dinuclear Group†14 Compounds with Element-Element Bonds by Transylidation.

Dinuclear low-valent compounds of the heavy main group elements are rare species owing to their intrinsic reactivity. However, they represent desirable target molecules due to their unusual bonding situations as well as applications in bond activations and materials synthesis. The isolation of such compounds usually requires the use of substituents that provide sufficient stability and synthetic access. Herein, we report on the use of strongly donating ylide-substituents to access low-valent dinuclear group 14 compounds. The ylides not only impart steric and electronic stabilization, but also allow facile synthesis via transfer of an ylide from tetrylene precursors of type R Y2 E to ECl2 (E=Ge, Sn; R Y=TolSO2 (PR3 )C with R=Ph, Cy). This method allowed the isolation of dinuclear complexes amongst a germanium analogue of a vinyl cation, [(Ph Y)2 GeGe(Ph Y)]+ with an electronic structure best described as a germylene-stabilized GeII cation and a ylide(chloro)digermene [Cy Y(Cl)GeGe(Cl)Cy Y] with an unusually unsymmetrical structure.

Potential Precursor Alternatives to the Pyrophoric Trimethylaluminium for the Atomic Layer Deposition of Aluminium Oxide.

New precursor chemistries for the atomic layer deposition (ALD) of aluminium oxide are reported as potential alternatives to the pyrophoric trimethylaluminium (TMA) which is to date a widely used Al precursor. Combining the high reactivity of aluminium alkyls employing the 3-(dimethylamino)propyl (DMP) ligand with thermally stable amide ligands yielded three new heteroleptic, non-pyrophoric compounds [Al(NMe2 )2 (DMP)] (2), [Al(NEt2 )2 (DMP)] (3, BDEADA) and [Al(NiPr2 )2 (DMP)] (4), which combine the properties of both ligand systems. The compounds were synthesized and thoroughly chemically characterized, showing the intramolecular stabilization of the DMP ligand as well as only reactive Al-C and Al-N bonds, which are the key factors for the thermal stability accompanied by a sufficient reactivity, both being crucial for ALD precursors. Upon rational variation of the amide alkyl chains, tunable and high evaporation rates accompanied by thermal stability were found, as revealed by thermal evaluation. In addition, a new and promising plasma enhanced (PE)ALD process using BDEADA and oxygen plasma in a wide temperature range from 60 to 220 °C is reported and compared to that of a modified variation of the TMA, namely [AlMe2 (DMP)] (DMAD). The resulting Al2 O3 layers are of high density, smooth, uniform, and of high purity. The applicability of the Al2 O3 films as effective gas barrier layers (GBLs) was successfully demonstrated, considering that coating on polyethylene terephthalate (PET) substrates yielded very good oxygen transmission rates (OTR) with an improvement factor of 86 for a 15 nm film by using DMAD and a factor of 25 for a film thickness of just 5 nm by using BDEDA compared to bare PET substrates. All these film attributes are of the same quality as those obtained for the industrial precursor TMA, rendering the new precursors safe and potential alternatives to TMA.

Isolation of a Diylide-Stabilized Stannylene and Germylene: Enhanced Donor Strength through Coplanar Lone Pair Alignment.

The preparation of the first stable diylide-substituted stannylene and germylene (Y2 E, with E=Ge, Sn and Y=[PPh3 -C-SO2 Tol]- ) is reported. The synthesis is easily accomplished in one step from the sulfonyl-substituted metalated ylide YNa and the corresponding ECl2 precursors. Y2 Ge and Y2 Sn exhibit unusual structures in the solid state and in solution, in which the three adjacent lone pairs in the C-E-C linkage are arranged coplanar to each other. As shown by DFT studies, this bonding situation is preferred over the typical π-donation from the ligands into the empty p-orbital at the metal due to the strong anion-stabilizing ability of the sulfonyl groups in the ylide backbone and their additional coordination to the metal. The alignment of the three lone pairs leads to a remarkable boost of the HOMO energy and thus of the donor strengths of the tetrylenes. Hence, Y2 Ge and Y2 Sn become stronger donors than their diamino or diaryl congeners and comparable to cyclic alkyl(amino)carbenes. First reactivity studies confirm the high reactivity of Y2 Ge and Y2 Sn, which for example undergo an intramolecular C-H activation reaction via metal-ligand cooperation.

Sodium Salicylate: An In-Depth Thermal and Photophysical Study.

Sodium salicylate (2-hydroxybenzoate) has been fully characterised by single-crystal X-ray diffraction (SCXRD), thermogravimetric analysis in combination with in operando FTIR spectroscopy and GC-MS, as well as by UV/Vis absorption and photoluminescence spectroscopy backed up by DFT calculations. SCXRD revealed a layered crystal structure composed of ionic sheets formed by Na+ -O contacts sandwiched between π-stacked aromatic rings of the salicylate anion oriented perpendicular to the layer plane. Only weak van der Waals interactions hold the individual sheets together. No solid/solid or solid/liquid phase transitions were observed upon heating, but a three-step decomposition was observed, with the first onset at 245 °C corresponding to concomitant release of CO2 and phenol. The UV/Vis absorption spectra show temperature-dependent absorption bands at around 305 and/or 345 nm, which according to DFT calculations correspond to the absorption of the carboxylate or phenolate proton transfer species, respectively. In solution, indications of the phenolate species are found only in a very apolar solvent (cyclohexane). Because of excited-state relaxation, emission always occurs from the phenolate structure, which explains the large Stokes shift.

Designing Stability into Thermally Reactive Plumbylenes.

Lead analogues of N-heterocyclic carbenes (NHPbs) are the least understood members of this increasingly important class of compounds. Here we report the design, preparation, isolation, structure, volatility, and decomposition pathways of a novel aliphatic NHPb: rac- N 2, N 3-di- tert-butylbutane-2,3-diamido lead(II) (1Pb). The large steric bulk of the tert-butylamido moieties and rac-butane backbone successfully hinder redox decomposition pathways observed for diamidoethylene and -ethane backbone analogues, pushing the onset of thermal decomposition from below 0 °C to above 150 °C. With an exceptionally high vapor pressure of 1 Torr at 94 ± 2 °C and excellent thermal stability among Pb(II) complexes, 1Pb is a promising precursor for the chemical vapor deposition (CVD) and atomic layer deposition (ALD) of functional lead-containing materials.

Solution and solid state conformational preferences of a family of cyclic disulphide bridged tetrapeptides.

A set of cyclic tetrapeptides of the general form cyclo (Boc-Cys-Pro-X-Cys-OMe) with X being L-/D-Ala, L-/D-Val, and L-/D-Trp was synthesized. These peptides serve as model systems for structure elucidation in solution and feature a variety of structural motifs - namely a ß-turn with intramolecular hydrogen bonding interactions, cis/trans isomerism, and a disulphide bond. In this work, we performed a comprehensive structural analysis focussing on their ß-turn conformational preferences using NMR, VCD, and Raman spectroscopy. Our results provide evidence for a strong influence of a single stereocenter on the structures of the peptides whereas solvent polarity does not significantly affect them. Additionally, the solid state conformational preferences were studied by crystal structure analysis. Overall, a general trend for the conformational preferences of this set of peptides can be concluded from the results of the complementary investigations.

Carbon-Halogen Bond Activation by Selenium-Based Chalcogen Bonding.

Chalcogen bonding is a little explored noncovalent interaction similar to halogen bonding. This manuscript describes the first application of selenium-based chalcogen bond donors as Lewis acids in organic synthesis. To this end, the solvolysis of benzhydryl bromide served as a halide abstraction benchmark reaction. Chalcogen bond donors based on a bis(benzimidazolium) core provided rate accelerations relative to the background reactivity by a factor of 20-30. Several comparative experiments provide clear indications that the observed activation is due to chalcogen bonding. The performance of the chalcogen bond donors is superior to that of a related brominated halogen bond donor.

(1-Butyl-4-methyl-pyridinium)[Cu(SCN)2]: a coordination polymer and ionic liquid.

The compound (C4C1py)[Cu(SCN)2], (C4C1py = 1-Butyl-4-methyl-pyridinium), which can be obtained from CuSCN and the ionic liquid (C4C1py)(SCN), turns out to be a new organic-inorganic hybrid material as it qualifies both, as a coordination polymer and an ionic liquid. It features linked [Cu(SCN)2](-) units, in which the thiocyanates bridge the copper ions in a µ1,3-fashion. The resulting one-dimensional chains run along the a axis, separated by the C4C1py counterions. Powder X-ray diffraction not only confirms the single-crystal X-ray structure solution but proves the reformation of the coordination polymer from an isotropic melt. However, the materials shows a complex thermal behavior often encountered for ionic liquids such as a strong tendency to form a supercooled melt. At a relatively high cooling rate, glass formation is observed. When heating this melt in differential scanning calorimetry (DSC) and temperature-dependent polarizing optical microscopy (POM), investigations reveal the existence of a less thermodynamically stable crystalline polymorph. Raman measurements conducted at 10 and 100 °C point towards the formation of polyanionic chain fragments in the melt. Solid-state UV/Vis spectroscopy shows a broad absorption band around 18,870 cm(-1) (530 nm) and another strong one below 20,000 cm(-1) (<500 nm). The latter is attributed to the d(Cu(I))→π*(SCN)-MLCT (metal-to-ligand charge transfer) transition within the coordination polymer yielding an energy gap of 2.4 eV. At room temperature and upon irradiation with UV light, the material shows a weak fluorescence band at 15,870 cm(-1) (630 nm) with a quantum efficiency of 0.90(2) % and a lifetime of 131(2) ns. Upon lowering the temperature, the luminescence intensity strongly increases. Simultaneously, the band around 450 nm in the excitation spectrum decreases.

Behavior of highly diluted electrolytes in strong electric fields-prevention of alumina deposition on grading electrodes in HVDC transmission modules by CO2-induced pH-control.

Alumina deposition on platinum grading electrodes in high voltage direct current (HVDC) transmission modules is an unsolved problem that has been around for more than three decades. This is due to the unavoidable corrosion of aluminum heat sinks that causes severe damage to electrical power plants and losses in the range of a million Euro range per day in power outage. Simple experiments in a representative HV test setup showed that aluminates at concentrations even below 10(-8) mol L(-1) can deposit on anodes through neutralization by protons produced in de-ionized water (κ≤0.15 µS cm(-1)) at 20-35 kV (8 mA) per electrode. In this otherwise electrolyte-poor aqueous environment, the depositions are formed three orders of magnitude below the critical precipitation concentration at pH 7! In the presence of an inert electrolyte such as TMAT (tetramethylammonium-p-toluenesulfonate), at a concentration level just above that of the total dissolved aluminum, no deposition was observed. Deposition can be also prevented by doping with CO2 gas at a concentration level that is magnitudes lower than that of the dissolved aluminum. From an overview of aqueous aluminum chemistry, the mystery of the alumina deposition process and its inhibition by CO2 is experimentally resolved and fully explained by field accumulation and repulsion models in synergism with acid-base equilibria. The extraordinary size of the alumina depositions is accounted for in terms of proton tunneling through "hydrated" alumina, which is supported by quantum chemical calculations. As a consequence, pulse-purging with pure CO2 gas is presented as a technical solution to prevent the deposition of alumina.

A roadmap to uranium ionic liquids: anti-crystal engineering.

In the search for uranium-based ionic liquids, tris(N,N-dialkyldithiocarbamato)uranylates have been synthesized as salts of the 1-butyl-3-methylimidazolium (C4mim) cation. As dithiocarbamate ligands binding to the UO2(2+) unit, tetra-, penta-, hexa-, and heptamethylenedithiocarbamates, N,N-diethyldithiocarbamate, N-methyl-N-propyldithiocarbamate, N-ethyl-N-propyldithiocarbamate, and N-methyl-N-butyldithiocarbamate have been explored. X-ray single-crystal diffraction allowed unambiguous structural characterization of all compounds except N-methyl-N-butyldithiocarbamate, which is obtained as a glassy material only. In addition, powder X-ray diffraction as well as vibrational and UV/Vis spectroscopy, supported by computational methods, were used to characterize the products. Differential scanning calorimetry was employed to investigate the phase-transition behavior depending on the N,N-dialkyldithiocarbamato ligand with the aim to establish structure-property relationships regarding the ionic liquid formation capability. Compounds with the least symmetric N,N-dialkyldithiocarbamato ligand and hence the least symmetric anions, tris(N-methyl-N-propyldithiocarbamato)uranylate, tris(N-ethyl-N-propyldithiocarbamato)uranylate, and tris(N-methyl-N-butyldithiocarbamato)uranylate, lead to the formation of (room-temperature) ionic liquids, which confirms that low-symmetry ions are indeed suitable to suppress crystallization. These materials combine low melting points, stable complex formation, and hydrophobicity and are therefore excellent candidates for nuclear fuel purification and recovery.

Phosphonium chloromercurate room temperature ionic liquids of variable composition.

The system trihexyl(tetradecyl)phosphonium ([P66614]Cl)/mercury chloride (HgCl2) has been investigated by varying the stoichiometric ratios from 4:1 to 1:2 (25, 50, 75, 100, 150, and 200 mol % HgCl2). All investigated compositions turn out to give rise to ionic liquids (ILs) at room temperature. The prepared ionic liquids offer the possibility to study the structurally and compositionally versatile chloromercurates in a liquid state at low temperatures in the absence of solvents. [P66614]2[HgCl4] is a simple IL with one discrete type of anion, while [P66614]{HgCl3} (with {} indicating a polynuclear arrangement) is an ionic liquid with a variety of polyanionic species, with [Hg2Cl6](2-) apparently being the predominant building block. [P66614]2[Hg3Cl8] and [P66614][Hg2Cl5] appear to be ILs at ambient conditions but lose HgCl2 when heated in a vacuum. For the liquids with the compositions 4:1 and 4:3, more than two discrete ions can be evidenced, namely, [P66614](+), [HgCl4](2-), and Cl(-) and [P66614](+), [HgCl4](2-), and the polynuclear {HgCl3}(-), respectively. The different stoichiometric compositions were characterized by (199)Hg NMR, Raman- and UV-vis spectroscopy, and cyclic voltammetry, among other techniques, and their densities and viscosities were determined. The [P66614]Cl/HgCl2 system shows similarities to the well-known chloroaluminate ILs (e.g., decrease in viscosity with increasing metal content after addition of more than 0.5 mol of HgCl2/mol [P66614]Cl, increasing density with increasing metal content, and the likely formation of polynuclear/polymeric/polyanionic species) but offer the advantage that they are air and water stable.

Solution-based synthesis of GeTe octahedra at low temperature.

GeTe octahedra were prepared by reaction of equimolar amounts of GeCl2·dioxane and Te(SiEt3)2 in oleylamine, whereas a slight excess of the Te precursor yielded GeTe octahedra decorated with elemental Te nanowires, which can be removed by washing with TOP. The mechanism of the GeTe formation is strongly influenced by the solvent. The expected elimination of Et3SiCl (dehalosilylation) only occurred in aprotic solvents, whereas Te(SiEt3)2 was found to react with primary and secondary amines with formation of silylamines. Temperature-dependent studies on the reaction in oleylamine showed that crystalline GeTe particles are formed at temperatures higher than 140 °C. XRD, SAED, and HRTEM studies proved the formation of rhombohedral GeTe nanoparticles. These findings were confirmed by a single-crystal and powder X-ray analysis. The rhombohedral structure modification was found, and the structure was solved in the acentric space group R3m.

Mercuric ionic liquids: [C(n)mim][HgX3], where n = 3, 4 and X = Cl, Br.

A series of mercury(II) ionic liquids, [C(n)mim][HgX(3)], where [C(n)mim] = n-alkyl-3-methylimidazolium with n = 3, 4 and X = Cl, Br, have been synthesized following two different synthetic approaches, and structurally characterized by means of single-crystal X-ray structure analysis ([C(3)mim][HgCl(3)] (1), Cc (No. 9), Z = 4, a = 16.831(4) Å, b = 10.7496(15) Å, c = 7.4661(14) Å, ß = 105.97(2)°, V = 1298.7(4) Å(3) at 298 K; [C(4)mim][HgCl(3)] (2), Cc (No. 9), Z = 4, a = 17.3178(28) Å, b = 10.7410(15) Å, c = 7.4706(14) Å, ß = 105.590(13)°, V = 1338.5(4) Å(3) at 170 K; [C(3)mim][HgBr(3)] (3), P2(1)/c (No. 14), Z = 4, a = 10.2041(10) Å, b = 10.7332(13) Å, c = 14.5796(16) Å, ß = 122.47(2)°, V = 1347.2(3) Å(3) at 170 K; [C(4)mim][HgBr(3)] (4), Cc (No. 9), Z = 4, a = 17.093(3) Å, b = 11.0498(14) Å, c = 7.8656(12) Å, ß = 106.953(13)°, V = 1421.1(4) Å(3) at 170 K). Compounds 1, 2, and 4 are isostructural and are characterized by strongly elongated trigonal [HgX(5)] bipyramids, which are connected via common edges in chains. In contrast, 3 contains [Hg(2)Br(6)] units formed by two edge-sharing tetrahedra. With melting points of 69.3 °C (1), 93.9 °C (2), 39.5 °C (3), and 58.3 °C (4), all compounds qualify as ionic liquids. 1, 2, and 4 solidify upon fast cooling as glasses, whereas 3 crystallizes. Cyclic voltammetry shows two separate, quasi-reversible redox processes, which can be associated with the 2Hg(2+)/Hg(2)(2+) and Hg(2)(2+)/2Hg redox couples.

Synthesis, Crystal and Electronic Structures of a Thiophosphinoyl- and Amino-Substituted Metallated Ylide.

α-Metallated ylides have revealed themselves to be versatile reagents for the introduction of ylide groups. Herein, we report the synthesis of the thiophosphinoyl and piperidyl (Pip) substituted α-metallated ylide [Ph2 (Pip)P=C-P(S)Ph2 ]M (M=Li, Na, K) through a four-step synthetic procedure starting from diphenylmethylphosphine sulfide. Metallation of the ylide intermediate was successfully accomplished with different alkali metal bases delivering the lithium, sodium and potassium salts, the latter isolable in high yields. Structure analyses of the lithium and potassium compounds in the solid state with and without crown ether revealed different aggregates (monomer, dimer and hexamer) with the metals coordinated by the thiophosphoryl moiety and ylidic carbon atom. Although the piperidyl group does not coordinate to the metal, it significantly contributes to the stability of the yldiide by charge delocalization through negative hyperconjugation.

Synthesis, Crystal and Electronic Structures of a Thiophosphinoyl- and Amino-Substituted Metallated Ylide.

Invited for this month's cover is the group of Viktoria H. Gessner at the Ruhr-University in Bochum (Germany). The cover shows the structure of the newly reported, isolated metallated ylide. Due to the high negative charge at the ylidic carbon center this compound is "on fire", but can be stabilized by smart molecular design. Structure analyses of the different alkali metal complexes combined with computational studies provide insights into the electronic structure of the compounds Read the full text of their Communication at 10.1002/open.202100178.

Cationic Phosphorus Compounds Based on a Bis(1-piperidinyl)-Substituted Carbodiphosphorane: Syntheses, Structures, and Csp3 -H Activation.

The use of the bis(1-piperidinyl)-substituted carbodiphosphorane (Ph2(Pip)P)2C (1) as an NCN ligand for the stabilization of phosphorus cations was studied. A simple ligand for halide exchange allowed the synthesis and isolation of a series of phosphorus monocations of the type [1-PR2]+ (with R = Cl, Br, I, CyCl, Ph). These cations exhibit characteristic NMR and structural properties which nicely correlate with the charge at the central phosphorus atom and the interaction between the ligand and the PR2 moiety. Halide abstraction from the monocations does not result in isolable dicationic compounds but in an unexpected intramolecular Csp3 -H activation in the piperidinyl group. DFT studies show that the selective activation of the CH2 group next to the nitrogen atom instead of a CH group at the phenyl substituents proceeds via an iminium intermediate formed by hydride transfer from the carbon atom to the cationic phosphorus center. This observation clearly demonstrates the pronounced π acidity of the dicationic phosphorus species in comparison to compounds with a further π-donor substituent.