Design of a sensor to estimate suspended sediment transport in situ using the measurements of water velocity, suspended sediment concentration and depth.

- The sediment transport plays a major role in every aquatic ecosystem. However, the lack of instruments to monitor this process has been an obstacle to understanding its effects. We present the design of a single sensor built to measure water velocity, suspended sediment concentration and depth in situ, and how to associate the three variables to estimate and analyse sediment transport. During the laboratory calibrations, the developed instrument presented a resolution from 0.001 g/L to 0.1 g/L in the 0-12 g/L range for the measurement of suspended sediment concentration and 0.05 m/s resolution for 0-0.5 m/s range and 0.001 m/s resolution for 0.5-1 m/s range for the measurement of water velocity. The device was deployed for 6 days in an estuarine area with high sediment dynamics to evaluate its performance. During the field experiment, the sensor successfully measured the tidal cycles and consequent change of flow directions, and the suspended sediment concentration in the area. These measurements allowed to estimate water discharge and sediment transport rates during the different phases of tides, and the daily total volume of water and total amount of sediment passing through the estuary.

Design of a Multipoint Cost-Effective Optical Instrument for Continuous In-Situ Monitoring of Turbidity and Sediment.

A cost-effective optical instrument for continuous in-situ monitoring applications is presented. With a production cost in raw materials of 38 €, a power consumption of 300 A in sleep mode and 100 mA in active mode (5 ms reading), and a capacity to monitor turbidity and sedimentary displacement at eight different depths in the water column, the sensor was developed for sediment monitoring in coastal areas. Due to the extent and dynamics of the processes involved in these areas, observations require a wide spatial and temporal resolution. Each of the eight monitoring nodes uses one infrared backscatter channel, to estimate turbidity and sediment concentration, and one ultraviolet with one infrared transmitted light channels to distinguish organic/inorganic composition of the suspended material load. An in-lab calibration was conducted, using formazine to correlate turbidity with the electronic outputs of the instrument. An analysis of the influence of external light sources and correction techniques were performed. Moreover, an in-lab experiment was conducted to study the behaviour of the sensor-to-sediment transport, wash load and sediment accumulation. The device was deployed, with a water level sensor, in an estuarine area with high sediment dynamics. The monitoring data were analysed, showing the potential of the device to continuously monitor turbidity, sediment processes, and distinguish between organic and inorganic matter, at the different depths in the water column.

Development of a Cost-Effective Optical Sensor for Continuous Monitoring of Turbidity and Suspended Particulate Matter in Marine Environment.

A cost-effective optical sensor for continuous in-situ monitoring of turbidity and suspended particulate matter concentration (SPM), with a production cost in raw materials less than 20 €, is presented for marine or fluvial applications. The sensor uses an infrared LED and three photodetectors with three different positions related to the light source-135º, 90º and 0º-resulting in three different types of light detection: backscattering, nephelometry and transmitted light, respectively. This design allows monitoring in any type of environment, offering a wide dynamic range and accuracy for low and high turbidity or SPM values. An ultraviolet emitter-receiver pair is also used to differentiate organic and inorganic matter through the differences in absorption at different wavelengths. The optical transducers are built in a watertight structure with a radial configuration where a printed circuit board with the electronic signal coupling is assembled. An in-lab calibration of the sensor was made to establish a relation between suspended particulate matter (SPM) or the turbidity (NTU) to the photodetectors' electrical output value in Volts. Two different sizes of seashore sand were used (180 µm and 350 µm) to evaluate the particle size susceptibility. The sensor was tested in a fluvial environment to evaluate SPM change during sediment transport caused by rain, and a real test of 22 days continuous in-situ monitoring was realized to evaluate its performance in a tidal area. The monitoring results were analysed, showing the SPM change during tidal cycles as well as the influence of the external light and biofouling problems.

Dietary inclusion of tomato pomace improves meat oxidative stability of young pigs.

The aim of this study was to assess the nutritional effect of tomato pomace, in combination with two distinct fat sources (lard or soya bean oil), on longissimus lumborum muscle, subcutaneous fat and liver of young pigs. Forty male pigs of 4 weeks old were randomly assigned to four dietary treatments using two fibre sources (wheat bran or 5.0% tomato pomace) and two fat sources (lard or soya bean oil), in a 2 × 2 factorial design for a 5-week trial. Tomato pomace did not improve colour, fatty acid profile, cholesterol content or lipid oxidation, nor did it yield detectable levels in lycopene or ß-carotene in the meat (p > 0.05). However, a positive increase in α-tocopherol content of meat and liver was observed in pigs fed tomato pomace (p < 0.05). Compared with lard, soya bean oil increased MUFA and PUFA proportions and decreased the percentage of SFA (p < 0.05). Our results indicate that 5.0% of tomato pomace increases pork oxidative stability and that 5.0% of soya bean oil, compared with lard, improves its nutritional quality.

Preparative isolation of polymerase chain reaction products using mixed-mode chromatography.

The polymerase chain reaction (PCR) has become one of the most useful techniques in molecular biology laboratories around the world. The purification of the target DNA product is often challenging, however, and most users are restricted to employing available commercial kits. The recent developments in mixed-mode chromatography have shown higher selectivity for a variety of nucleic acid-containing samples. Capto Adhere is a mixed-mode chromatography resin that offers a high-selectivity ligand and is here applied for the purification of amplified DNAs from PCR mixtures in a 10-min single step, with yields above 95%, high linearity, and high precision for different concentrations.

Color Match of a Universal-shade Composite Resin for Restoration of Non-carious Cervical Lesions: An Equivalence Randomized Clinical Trial.

PURPOSE: The objective of this double-blind, split-mouth, randomized clinical trial was to evaluate the color match of a single-shade composite resin Admira Fusion X-tra in comparison with a multi-shade composite resin Admira Fusion in non-carious cervical lesion restorations (NCCLs). METHODS AND MATERIALS: One hundred and twenty restorations were performed on NCCLs with two restorative materials (n=60). After prophylaxis, the teeth were isolated with a rubber dam, and one universal adhesive was applied in the selective enamel etching strategy. For both groups, the restorations were inserted incrementally and light-cured. The values of the coordinates L*, a*, and b* in the cervical third before vs after the restorations and cervical vs middle third after the restorations were evaluated using a digital spectrophotometer after the coordinate values were used to calculate the CIEDE (ΔE00). The restorations were evaluated at baseline and after 7 days of clinical performance according to the FDI criteria. Statistical analysis was performed using the Chi-square test for all parameters. Color change was analyzed by Student t-test for paired samples (α=0.05). RESULTS: All restorations were evaluated after 7 days. Regarding the color measurement, no significant difference was observed when Admira Fusion was compared to Admira Fusion X-tra for any of the comparisons performed (p>0.05). However, the values of ΔE00 in the cervical third before vs after the restorations were higher when compared with ΔE00 observed when the cervical vs middle third after restorations were compared. All restorations received the score "clinically very good" after 7 days for all outcomes, including the subjective color match, when evaluated for FDI criterion. CONCLUSIONS: The single-shade composite resin used achieves the same color match when compared to a multi-shade composite resin after 7 days in NCCLs.

Nucleic acid and protein extraction from electropermeabilized E. coli cells on a microfluidic chip.

Due to the extensive use of nucleic acid and protein analysis of bacterial samples, there is a need for simple and rapid extraction protocols for both plasmid DNA and RNA molecules as well as reporter proteins like the green fluorescent protein (GFP). In this report, an electropermeability technique has been developed which is based on exposing E. coli cells to low voltages to allow extraction of nucleic acids and proteins. The flow-through electropermeability chip used consists of a microfluidic channel with integrated gold electrodes that promote cell envelope channel formation at low applied voltages. This will allow small biomolecules with diameters less than 30 A to rapidly diffuse from the permeabilized cells to the surrounding solution. By controlling the applied voltage, partial and transient to complete cell opening can be obtained. By using DC voltages below 0.5 V, cell lysis can be avoided and the transiently formed pores can be closed again and the cells survive. This method has been used to extract RNA and GFP molecules under conditions of electropermeability. Plasmid DNA could be recovered when the applied voltage was increased to 2 V, thus causing complete cell lysis.

The emerging of xylazine as a new drug of abuse and its health consequences among drug users in Puerto Rico.

During the last decade, the veterinary anesthetics have gained popularity as recreational drugs. The aim of this study was to document the use of "anestecia de caballo" (xylazine) and its consequences among drug users in Puerto Rico. The study combined a cross-sectional survey with 89 drug users and two focus groups conducted in Mayagüez with frontline drug treatment providers. Drug users were recruited from communities of the San Juan metropolitan area using a variety of ethnographic and outreach strategies. A short questionnaire developed for the study collected information on sociodemographics, xylazine use, and its consequences. The two focus groups were conducted to discuss the details related to xylazine use, its consequences, and utilization awareness. The sample comprised 63 males (70.8%) and 26 females with a mean age of 37.2 years. The mean number of years of drug use was 14.3, with a mean frequency of drug use of 5.9 times daily. More than 65% reported speedball as the principal drug of use. The prevalence of xylazine use was 80.7%. More than 42% of the sample used xylazine in a mixture with speedball. The main route of administration of xylazine was injection but 14% reported the use of xylazine by inhalation. More than 35% of the sample reported skin lesions and 21.1% reported at least one overdose episode. Multiple logistic regression analysis revealed that males (OR = 3.47, CI = 1.10-12.00) and those who reported speedball as their main drug of use (OR = 9.34, CI = 2.51-34.70) were significantly more likely to be xylazine users. Focus groups revealed that drug users claimed to recognize the presence of xylaxine in a mixture of speedball based on its effects, taste, the color of the drug (dark brown), and its odor. In conclusion, the use of xylazine among drug users in Puerto Rico seems to be an emerging trend with potentially serious health consequences.

Thyrotropin-secreting microadenoma and the importance of a prompt diagnosis: A case report.

Background: The prevalence of thyrotropin-secreting pituitary adenomas, most being macroadenomas, is one to two cases per million inhabitants. Their differential diagnosis may be challenging, especially for microadenomas. Case description: We present the case of a 50-year-old male with progressive neck enlargement, hot sudorific hands, anorexia, diarrhea, and weight loss over the preceding three months. Laboratory evaluation revealed high thyroid hormones, predominantly high free triiodothyronine of 7.74 pg/mL (reference range 2.3-4.2), with a non-suppressed thyroid stimulating hormone (TSH) of 1.73 µIU/mL (reference range 0.55-4.78). A high level of suspicion directed additional evaluation that revealed a high total alpha-subunit of glycoprotein hormones (αGS) and αGS/TSH ratio. Magnetic resonance imaging revealed a six mm pituitary lesion. A microthyrotropinoma was diagnosed, and long-acting octreotide was initiated before surgery for symptomatic control. Endoscopic transnasal transsphenoidal tumor resection was performed months later. The patient was in remission one year after surgery with no pituitary deficits. Conclusions: Reaching an accurate diagnosis on time is crucial for deciding the optimal therapeutic approach and preventing and decreasing the frequency of endocrine and neurological complications. HIPPOKRATIA 2022, 26 (4):157-160.

Development of an automated sensor for in-situ continuous monitoring of streambed sediment height of a waterway.

The sedimentary processes play a major role in every aquatic ecosystem, however, there are few automated options for in-situ monitoring of sediment displacement in the streambed of waterways. We present an automated optical instrument for in-situ continuous monitoring of sediment deposition and erosion of the streambed that requires no calibration. With a production cost of 32€, power consumption of 300 µA in sleep mode, and capacity to monitor the bedform of a waterway, the sensor was developed to evaluate the sediment dynamics of coastal areas with a wide spatial and temporal resolution. The novel device is intended to be buried in the sand and uses 32 infrared channels to monitor the streambed sediment height. For testing purposes, a maximum measuring length of 160 mm and 5 mm resolution was chosen, but these values are scalable. Sensors can be built with different ranges and precision according to the needs of the fieldwork. A laboratory experiment was conducted to demonstrate the working principle of the instrument and its behaviour regarding the turbidity originated by suspended sediment and the settling and deposition of the suspended particles. The device was deployed for 119 days in an estuarine area and was able to detect patterns in the sediment deposition and resuspension during the tidal cycles. Also, abnormal events occurred during the experiment as floods and algae blooms. During these events, the sensor was able to record exceptional erosion and sediment deposition rates. The reported automated instrument can be broadly used in sedimentary studies or management and planning of fluvial and maritime infrastructures to provide real-time information about the changes in the bedform of the watersheds.

Five-year Randomized Clinical Trial on the Performance of Two Etch-and-rinse Adhesives in Noncarious Cervical Lesions.

OBJECTIVES: To evaluate the 5-year clinical performance of two-step etch-and-rinse adhesives in noncarious cervical lesions (NCCL). METHODS AND MATERIALS: The sample comprised 35 adults with at least two similar-sized NCCL. Seventy restorations were placed, according to one of the following groups: Adper Single Bond 2 (SB) and Ambar (AM). The restorations were placed incrementally using a resin composite (Opallis). The restorations were evaluated at baseline and after 6 and 18 months and 5 years using some items of the FDI criteria. The differences in the ratings of the two materials after 6 months, 18 months, and 5 years were performed with Friedman repeated measures ANOVA by rank and McNemar test for significance in each pair (α=0.05). RESULTS: Five patients did not attend the 60-month recall. No significant differences were observed between the materials for any criteria evaluated. Twenty-one restorations failed (12 for SB and 9 for AM) after 60 months. Thus, the retention rate for SB at 60 months were 55.6% for SB and 71% for AM (p=0.32). After 60 months, 12 restorations (6 for SB and 6 AM) showed some loss of marginal adaptation (p=1.0). Slight marginal discoloration was observed in 10 restorations (6 for SB and 4 AM; p=0.91). Five restorations (2 for SB and 3 for AM) showed recurrences of caries (p=1.0). CONCLUSIONS: Both two-step etch-and-rinse adhesives-Adper Single Bond 2, a polyalkenoic acid-containing adhesive, and Ambar, a 10-methacryloyloxydecyl dihydrogen phosphate (MDP)-containing adhesive-showed acceptable clinical performance after 60 months.

Preliminary results on the effects of grape (Vitis vinifera) seed condensed tannins on in vitro intestinal digestibility of the lupin (Lupinus angustifolius) seed protein fraction in small ruminants.

Condensed tannins (CT) from grape seeds (Vitis vinifera L.) were added to complex the protein fraction of Lupinus angustifolius seeds. Three CT/protein ratios were used: 96 mg/g (T(1)), 180 mg/g (T(2)) and 0 mg/g (T(0)). The CP losses in the rumen were assessed by the nylon-bag technique and CP intestinal digestibility (CPID) was estimated using an in vitro assay applying a three-step procedure: samples were subject to rumen degradation (in situ, 16 h) and the remaining residues were subject to the digestive enzymes of the abomasum and pancreas in vitro. A positive effect (p < 0.05) of the level of CT on the immediately soluble faction a and the insoluble degradable fraction b was observed between T(0) and T(2) . In the presence of CT the rumen degradation rate was reduced (p < 0.05) from 0.0763/h (T(0)) to 0.0443/h (T(2)). The application of CT showed a reduction (around 10% for T(1)) of effective rumen CP degradability. The CPID did not seem to be affected (p > 0.05) by the presence of CT. These findings suggest that the use of grape seed CT might have the potential to improve the efficiency of utilisation of the protein fraction from lupin seeds.

Evaluation of Tooth Sensitivity of In-office Bleaching with Different Light Activation Sources: A Systematic Review and a Network Meta-analysis.

OBJECTIVES: A systematic review and network meta-analysis were performed to answer the following research question: Are there differences in the risk and the intensity of tooth sensitivity (TS) among eight light activation systems for in-office bleaching in adults? METHODS: Randomized controlled trials (RCTs) that compared at least two different in-office bleaching light activations were included. The risk of bias (RoB) was evaluated with the RoB tool version 1.0 from the Cochrane Collaboration tool. A random-effects Bayesian mixed treatment comparison (MTC) model was used independently for high- and low-concentration hydrogen peroxide. The certainty of the evidence was evaluated using the GRADE (Grading of Recommendations, Assessment, Development and Evaluations) approach. A comprehensive search was performed in PubMed, Bridge Base Online (BBO), Latin American and Caribbean Health Sciences Literature database (LILACS), Cochrane Library, Scopus, Web of Science, and grey literature without date and language restrictions on April 23, 2017 (updated on September 26, 2019). Dissertations and theses, unpublished and ongoing trials registries, and IADR (International Association for Dental Research) abstracts (2001-2019) were also searched. RESULTS: After title and abstract screening and the removal of duplicates, 32 studies remained. Six were considered to be at low RoB, three had high RoB, and the remaining had an unclear RoB. The MTC analysis showed no significant differences among the treatments in each network. In general, the certainty of the evidence was graded as low due to unclear RoB and imprecision. CONCLUSION: There is no evidence that the risk and intensity of TS are affected by light activation during in-office bleaching.

A New Dual-cure Universal Simplified Adhesive: 18-month Randomized Multicenter Clinical Trial.

CLINICAL RELEVANCE: Non-carious cervical lesion restorations using a dual-cure universal adhesive in self-etch and etch-and-rinse mode showed satisfactory clinical performance after 18 months. SUMMARY: Objectives: The objective of this multicenter, double-blind, split-mouth randomized clinical trial was to evaluate the clinical performance of a new dual-cure universal adhesive system (Futurabond U, Voco GmBH) when applied using different strategies over a period of 18 months.Methods and Materials: Fifty patients participated in this study. Two hundred non-carious cervical lesions were restored using the adhesive Futurabond U according to four adhesive strategies (n=50 per group): only self-etch (SEE), selective enamel etching + self-etch (SET), etch-and-rinse with dry dentin (ERDry), and etch-and-rinse with wet dentin (ERWet). After the adhesive application, cavities were restored using Admira Fusion composite resin. These restorations were evaluated according to FDI World Dental Federation criteria for the following characteristics: retention/fracture, marginal adaptation, marginal staining, postoperative sensitivity, and caries recurrence.Results: After 18 months, only four patients (12 months: one patient, n=4 restorations; and 18 months: three patients, n=12 restorations) were not evaluated. Fourteen restorations were lost after 18 months of clinical evaluation (four for SEE, three for SET, three for ERDry, and four for ERWet). The retention rates for 18 months (95% confidence interval) were 92% (81%-97%) for SEE, 94% (83%-97%) for SET, 94% (83%-97%) for ERDry, and 92% (81%-97%) for ERWet (p>0.05). Thirty-eight restorations were considered to have minor discrepancies in marginal adaptation at the 18-month recall (13 for SEE, 13 for SET, six for ERDry, and six for ERWet; p>0.05). Fourteen restorations were detected as a minor marginal discoloration at the 18-month recall (six for SEE, six for SET, one for ERDry, and one for ERWet; p>0.05). However, all were considered clinically acceptable. No restorations showed postoperative sensitivity or caries recurrence at the time.Conclusion: The clinical performance of the Futurabond U did not depend on the bonding strategy used, and it was considered reliable after 18 months of clinical evaluation, although more marginal discrepancy was observed in the self-etch group.

Specific recognition of supercoiled plasmid DNA in arginine affinity chromatography.

Arginine chromatography was used to fully separate supercoiled and open circular plasmid DNA (pDNA) isoforms. The results show that the arginine matrix promotes multiple interactions with pDNA, including not only electrostatic and hydrophobic but also biorecognition of nucleotide bases by the arginine ligand. The strong interactions occurring with DNA backbone provide stability, conducting to high effectiveness of arginine support to bind pDNA at low ionic strength. The specific interaction of arginine with sc pDNA could be due to the ability of arginine matrix to be involved in complex interactions that are partly dependent on the conformation of the DNA molecule.

A novel M163L mutation in connexin 26 causing cell death and associated with autosomal dominant hearing loss.

Mutations in GJB2 gene (encoding connexin 26) are the most common cause of hereditary non-syndromic sensorineural hearing loss (NSSHL) in different populations. The majority of GJB2 mutations are recessive, but a few dominant mutations have been associated with hearing loss either isolated or associated with skin disease. We describe a novel dominant pathogenic GJB2 mutation, identified in a Portuguese family affected with bilateral mild/moderate high-frequency NSSHL. In vitro functional studies demonstrate that the mutant protein (p.M163L) has defective trafficking to the plasma membrane and is associated with increased cell death.

A novel hearing-loss-related mutation occurring in the GJB2 basal promoter.

Mutations in the GJB2 gene are a major cause of non-syndromic recessive hearing loss in many countries. In a significant fraction of patients, only monoallelic GJB2 mutations known to be either recessive or of unclear pathogenicity are identified. This paper reports a novel GJB2 mutation, -3438C-->T, found in the basal promoter of the gene, in trans with V84M, in a patient with profound hearing impairment. This novel mutation can abolish the basal promoter activity of GJB2. These results highlight the importance of extending the mutational screening to regions outside the coding region of GJB2.

Growth inhibition of bacterial isolates recovered from two types of Portuguese dry smoked sausages (chouriço).

Potassium sorbate (PS), sodium benzoate (SB) and methyl p-hydroxybenzoate (MHB) were investigated as surface treatments for their ability to inhibit the growth of 18 isolates of spoilage and pathogenic bacteria from two types of Portuguese dry smoked sausages (Chouriço). MHB significantly inhibited the growth rate of 12 of the isolates (p<0.05) whereas no effect was observed for four isolates of lactic acid bacteria, identified as Enterococcusfaecium, Pediococcusacidilactici and Lactobacilluscurvatus, and two isolates identified as Clostridiumaminovalericum and Staphylococcusepidermidis. PS and SB had less influence on the bacterial growth rates. It was concluded that MHB can be applied as surface treatment to improve the stability and safety of the product along shelf life period in modified atmosphere package.