Perfect and Controllable Nesting in Minimally Twisted Bilayer Graphene.

Parallel ("nested") regions of a Fermi surface (FS) drive instabilities of the electron fluid, for example, the spin density wave in elemental chromium. In one-dimensional materials, the FS is trivially fully nested (a single nesting vector connects two "Fermi dots"), while in higher dimensions only a fraction of the FS consists of parallel sheets. We demonstrate that the tiny angle regime of twist bilayer graphene (TBLG) possesses a phase, accessible by interlayer bias, in which the FS consists entirely of nestable "Fermi lines", the first example of a completely nested FS in a two-dimensional (2D) material. This nested phase is found both in the ideal as well as relaxed structure of the twist bilayer. We demonstrate excellent agreement with recent STM images of topological states in this material and elucidate the connection between these and the underlying Fermiology. We show that the geometry of the Fermi lines network is controllable by the strength of the applied interlayer bias, and thus TBLG offers unprecedented access to the physics of FS nesting in 2D materials.

Meltdown! Local Heating by Decaying Excited Host Positive Polarons Triggers Aggregation Quenching in Blue PhOLEDs.

Exciton-polaron induced aggregation (EPIA) in organic host materials for blue Phosphorescent Organic Light Emitting Diodes (PhOLEDs) is driven by a non-radiative decay of electronically excited positive polarons resulting in a local heating of the amourphous host matrix. The released heat triggers morphological changes, i. e. molecular aggregation between neighboring host molecules. The resulting aggregates, which our calculations identify as carbazolyl dimers, lead to decreased PhOLED efficiency. Statistical assessment of some host-only morphologies reveals a structure-dependent propensity for molecular aggregation corroborating the identified EPIA mechanism. Our findings provide a fresh look at established molecular design rules and will help to improve blue PhOLED host materials to enhance blue PhOLED device lifetimes.

Structural origins of the cohesive energy in metal-terpyridine oligomer thin-films.

FeII-terpyridine based oligomers have attracted considerable interest as key constituents for the realization of highly robust, ultra-thin ordered layers of metal center oligomers (MCOs) for organic electronics applications. By using molecular simulations and nanotribology investigations, we report on the origins of the surprisingly high mechanical and thermal stability in this type of MCO layers, which finds its expression in nanowear resistance values of up to 1.5 µN for the MCO films, as well as in a thermal stability of two-terminal MCO junctions to temperatures up to ∼100 °C under electrical load. A theoretical analysis of the fundamental cohesive forces among the constituents within the context of an electrostatic model reveal that the cohesive energy is essentially based on Coulomb interactions among the ionic constituents of the oligomers, leading to an estimated cohesive energy per molar mass of 0.0132 eV mol g-1 for MCO layers that advantageously compare to the 0.0061 eV mol g-1 reported for pentacene crystals.

Charge Transport by Superexchange in Molecular Host-Guest Systems.

Charge transport in disordered organic semiconductors is generally described as a result of incoherent hopping between localized states. In this work, we focus on multicomponent emissive host-guest layers as used in organic light-emitting diodes (OLEDs), and show using multiscale ab initio based modeling that charge transport can be significantly enhanced by the coherent process of molecular superexchange. Superexchange increases the rate of emitter-to-emitter hopping, in particular if the emitter molecules act as relatively deep trap states, and allows for percolation path formation in charge transport at low guest concentrations.

Spin-crossover and massive anisotropy switching of 5d transition metal atoms on graphene nanoflakes.

In spin crossover phenomena, the magnetic moment of a molecule is switched by external means. Here we theoretically predict that several 5d-transition metals (TMs) adsorbed on finite graphene flakes undergo a spin crossover, resulting from multiple adsorption minima, that are absent in the zero-dimensional limit of benzene and the two-dimensional limit of graphene. The different spin states are stable at finite temperature and can be reversibly switched with an electric field. The system undergoes a change in magnetic anisotropy upon spin crossover, which facilitates read-out of the spin state. The TM-decorated nanoflakes thus act as fully controlled single-ion magnetic switches.

Selective dispersion of large-diameter semiconducting single-walled carbon nanotubes with pyridine-containing copolymers.

The purity of single-walled carbon nanotubes (SWNTs) is a key parameter for their integration in electronic, optoelectronic and photonic devices. Samples of pristine SWNTs are inhomogeneous in terms of electric behavior and diameter and contain a variety of amorphous carbon and catalyst residues. To obtain high performance devices, purification of SWNTs is required. Conjugated polymers have emerged as efficient solubilizing and sorting agents for small diameter SWNTs (HiPco tubes, 0.7 nm<Ø<1.1 nm). Nevertheless, reports on polymers able to efficiently sort large diameter SWNTs with Ø>1.1 nm are lacking. Several pyridine-containing copolymers were synthesized for this purpose and showed efficient and selective extraction of semiconducting large diameter SWNTs (PLV tubes, Ø>1.1 nm). High concentration and high purity suspensions are obtained without the use of ultracentrifugation, which gives an up-scaling potential of the method. The emission wavelength is in near infrared region around 1550 nm and fits with broadly used telecommunication wavelength window. The processes taking place at the interface were simulated by a newly designed hybrid coarse-grain model combining density functional theory and geometrical calculation to yield insights into the wrapping processes with an unprecedented level of details for such large diameter SWNTs.

Thin deposits and patterning of room-temperature-switchable one-dimensional spin-crossover compounds.

We present a study on thin deposits and patterning of 1-D spin-crossover compounds Fe(II)-(L)(2)H](ClO(4))(3)·MeOH [L = 4'-(4'''-pyridyl)-1,2':6'1''-bis- (pyrazolyl) pyridine] (1) that exhibit a reversible, thermally driven spin transition at room temperature. Micrometric rodlike crystals of 1 on silicon surfaces are achieved by drop casting and solvent annealing. We observed that the crystallinity of thin deposits and spin-transition properties critically depends on the deposition procedure. Furthermore, we proved processability and patterning using unconventional wet lithography that reduces the crystallite formation time by 1 order of magnitude. Thin deposits of 1 were characterized by atomic force microscopy, polarized optical microscopy and X-rays, and the switching properties were characterized by Raman spectroscopy.

Influence of conformation on conductance of biphenyl-dithiol single-molecule contacts.

The conductance of a family of biphenyl-dithiol derivatives with conformationally fixed torsion angle was measured using the scanning tunneling microscopy (STM)-break-junction method. We found that it depends on the torsion angle phi between two phenyl rings; twisting the biphenyl system from flat (phi = 0 degrees ) to perpendicular (phi = 90 degrees ) decreased the conductance by a factor of 30. Detailed calculations of transport based on density functional theory and a two level model (TLM) support the experimentally obtained cos(2) phi correlation between the junction conductance G and the torsion angle phi. The TLM describes the pair of hybridizing highest occupied molecular orbital (HOMO) states on the phenyl rings and illustrates that the pi-pi coupling dominates the transport under "off-resonance" conditions where the HOMO levels are well separated from the Femi energy.

Molecular switch controlled by pulsed bias voltages.

Recent experiments have shown that the current-voltage characteristics (I-V) of BPDN-DT (bipyridyl-dinitro oligophenylene-ethynylene dithiol) can be switched in a very controlled manner between "on" and "off" traces by applying a pulse in a bias voltage, V(bias). Here, the polaron formation energies are calculated to check a frequently held belief, namely, that the polaron formation can explain the observed bistability. These results are not consistent with such a mechanism. Instead, a conformational reorientation is proposed. The molecule carries an intrinsic dipole moment, which couples to V(bias). Ramping V(bias) exerts a force on the dipole that can reorient ("rotate") the molecule from the ground state ("off") into a metastable configuration ("on") and back. By elaborated electronic structure calculations, a specific path for this rotation is identified through the molecule's conformational phase space. It is shown that this path has sufficiently high barriers to inhibit thermal instability but that the molecule can still be switched in the voltage range of the junction stability. The theoretical I-Vs qualitatively reproduce the key experimental observations. A proposal for the experimental verification of the alternative mechanism of conductance switching is presented.

Expanding the coordination cage: a ruthenium(II)-polypyridine complex exhibiting high quantum yields under ambient conditions.

A mononuclear ruthenium(II) polypyridyl complex with an enlarged terpyridyl coordination cage was synthesized by the formal introduction of a carbon bridge between the coordinating pyridine rings. Structurally, the ruthenium(II) complex shows an almost perfect octahedral N6 coordination around the central Ru(II) metal ion. The investigation of the photophysical properties reveals a triplet metal-to-ligand charge transfer emission with an unprecedented quantum yield of 13% and a lifetime of 1.36 mus at room temperature and in the presence of air oxygen. An exceptional small energy gap between light absorption and light emission, or Stokes shift, was detected. Additionally, time-dependent density functional theory calculations were carried out in order to characterize the ground state and both the singlet and triplet excited states. The exceptional properties of the new compound open the perspective of exploiting terpyridyl-like ruthenium complexes in photochemical devices under ambient conditions.

Switching the Proton Conduction in Nanoporous, Crystalline Materials by Light.

Proton conducting nanoporous materials attract substantial attention with respect to applications in fuel cells, supercapacitors, chemical sensors, and information processing devices inspired by biological systems. Here, a crystalline, nanoporous material which offers dynamic remote-control over the proton conduction is presented. This is realized by using surface-mounted metal-organic frameworks (SURMOFs) with azobenzene side groups that can undergo light-induced reversible isomerization between the stable trans and cis states. The trans-cis photoisomerization results in the modulation of the interaction between MOF and guest molecules, 1,4-butanediol and 1,2,3-triazole; enabling the switching between the states with significantly increased (trans) and reduced (cis) conductivity. Quantum chemical calculations show that the trans-to-cis isomerization results in the formation of stronger hydrogen bridges of the guest molecules with the azo groups, causing stronger bonding of the guest molecules and, as a result, smaller proton conductivity. It is foreseen that photoswitchable proton-conducting materials may find its application in advanced, remote-controllable chemical sensors, and a variety of devices based on the conductivity of protons or other charged molecules, which can be interfaced with biological systems.

Rational In Silico Design of an Organic Semiconductor with Improved Electron Mobility.

Organic semiconductors find a wide range of applications, such as in organic light emitting diodes, organic solar cells, and organic field effect transistors. One of their most striking disadvantages in comparison to crystalline inorganic semiconductors is their low charge-carrier mobility, which manifests itself in major device constraints such as limited photoactive layer thicknesses. Trial-and-error attempts to increase charge-carrier mobility are impeded by the complex interplay of the molecular and electronic structure of the material with its morphology. Here, the viability of a multiscale simulation approach to rationally design materials with improved electron mobility is demonstrated. Starting from one of the most widely used electron conducting materials (Alq3 ), novel organic semiconductors with tailored electronic properties are designed for which an improvement of the electron mobility by three orders of magnitude is predicted and experimentally confirmed.

Superexchange Charge Transport in Loaded Metal Organic Frameworks.

In the past, nanoporous metal-organic frameworks (MOFs) have been mostly studied for their huge potential with regard to gas storage and separation. More recently, the discovery that the electrical conductivity of a widely studied, highly insulating MOF, HKUST-1, improves dramatically when loaded with guest molecules has triggered a huge interest in the charge carrier transport properties of MOFs. The observed high conductivity, however, is difficult to reconcile with conventional transport mechanisms: neither simple hopping nor band transport models are consistent with the available experimental data. Here, we combine theoretical results and new experimental data to demonstrate that the observed conductivity can be explained by an extended hopping transport model including virtual hops through localized MOF states or molecular superexchange. Predictions of this model agree well with precise conductivity measurements, where experimental artifacts and the influence of defects are largely avoided by using well-defined samples and the Hg-drop junction approach.

Ultrarobust Thin-Film Devices from Self-Assembled Metal-Terpyridine Oligomers.

Ultrathin molecular layers of Fe(II) -terpyridine oligomers allow the fabrication of large-area crossbar junctions by conventional electrode vapor deposition. The junctions are electrically stable for over 2.5 years and operate over a wide range of temperatures (150-360 K) and voltages (±3 V) due to the high cohesive energy and packing density of the oligomer layer. Electrical measurements reveal ideal Richardson-Shottky emission in surprising agreement with electrochemical, optical, and photoemission data.

QM/QM approach to model energy disorder in amorphous organic semiconductors.

It is an outstanding challenge to model the electronic properties of organic amorphous materials utilized in organic electronics. Computation of the charge carrier mobility is a challenging problem as it requires integration of morphological and electronic degrees of freedom in a coherent methodology and depends strongly on the distribution of polaron energies in the system. Here we represent a QM/QM model to compute the polaron energies combining density functional methods for molecules in the vicinity of the polaron with computationally efficient density functional based tight binding methods in the rest of the environment. For seven widely used amorphous organic semiconductor materials, we show that the calculations are accelerated up to 1 order of magnitude without any loss in accuracy. Considering that the quantum chemical step is the efficiency bottleneck of a workflow to model the carrier mobility, these results are an important step toward accurate and efficient disordered organic semiconductors simulations, a prerequisite for accelerated materials screening and consequent component optimization in the organic electronics industry.

Charge carrier mobility and electronic properties of Al(Op)3: impact of excimer formation.

We have studied the electronic properties and the charge carrier mobility of the organic semiconductor tris(1-oxo-1H-phenalen-9-olate)aluminium(III) (Al(Op)3) both experimentally and theoretically. We experimentally estimated the HOMO and LUMO energy levels to be -5.93 and -3.26 eV, respectively, which were close to the corresponding calculated values. Al(Op)3 was successfully evaporated onto quartz substrates and was clearly identified in the absorption spectra of both the solution and the thin film. A structured steady state fluorescence emission was detected in solution, whereas a broad, red-shifted emission was observed in the thin film. This indicates the formation of excimers in the solid state, which is crucial for the transport properties. The incorporation of Al(Op)3 into organic thin film transistors (TFTs) was performed in order to measure the charge carrier mobility. The experimental setup detected no electron mobility, while a hole mobility between 0.6 × 10(-6) and 2.1 × 10(-6) cm(2)·V(-1)·s(-1) was measured. Theoretical simulations, on the other hand, predicted an electron mobility of 9.5 × 10(-6) cm(2)·V(-1)·s(-1) and a hole mobility of 1.4 × 10(-4) cm(2)·V(-1)·s(-1). The theoretical simulation for the hole mobility predicted an approximately one order of magnitude higher hole mobility than was observed in the experiment, which is considered to be in good agreement. The result for the electron mobility was, on the other hand, unexpected, as both the calculated electron mobility and chemical common sense (based on the capability of extended aromatic structures to efficiently accept and delocalize additional electrons) suggest more robust electron charge transport properties. This discrepancy is explained by the excimer formation, whose inclusion in the multiscale simulation workflow is expected to bring the theoretical simulation and experiment into agreement.

Spin transition in arrays of gold nanoparticles and spin crossover molecules.

We investigate if the functionality of spin crossover molecules is preserved when they are assembled into an interfacial device structure. Specifically, we prepare and investigate gold nanoparticle arrays, into which room-temperature spin crossover molecules are introduced, more precisely, [Fe(AcS-BPP)2](ClO4)2, where AcS-BPP = (S)-(4-{[2,6-(dipyrazol-1-yl)pyrid-4-yl]ethynyl}phenyl)ethanethioate (in short, Fe(S-BPP)2). We combine three complementary experiments to characterize the molecule-nanoparticle structure in detail. Temperature-dependent Raman measurements provide direct evidence for a (partial) spin transition in the Fe(S-BPP)2-based arrays. This transition is qualitatively confirmed by magnetization measurements. Finally, charge transport measurements on the Fe(S-BPP)2-gold nanoparticle devices reveal a minimum in device resistance versus temperature, R(T), curves around 260-290 K. This is in contrast to similar networks containing passive molecules only that show monotonically decreasing R(T) characteristics. Backed by density functional theory calculations on single molecular conductance values for both spin states, we propose to relate the resistance minimum in R(T) to a spin transition under the hypothesis that (1) the molecular resistance of the high spin state is larger than that of the low spin state and (2) transport in the array is governed by a percolation model.

Ab Initio Treatment of Disorder Effects in Amorphous Organic Materials: Toward Parameter Free Materials Simulation.

Disordered organic materials have a wide range of interesting applications, such as organic light emitting diodes, organic photovoltaics, and thin film electronics. To model electronic transport through such materials it is essential to describe the energy distribution of the available electronic states of the carriers in the material. Here, we present a self-consistent, linear-scaling first-principles approach to model environmental effects on the electronic properties of disordered molecular systems. We apply our parameter free approach to calculate the energy disorder distribution of localized charge states in a full polaron model for two widely used benchmark-systems (tris(8-hydroxyquinolinato)aluminum (Alq3) and N,N'-bis(1-naphthyl)-N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine (α-NPD)) and accurately reproduce the experimental charge carrier mobility over a range of 4 orders of magnitude. The method can be generalized to determine electronic and optical properties of more complex systems, e.g. guest-host morphologies, organic-organic interfaces, and thus offers the potential to significantly contribute to de novo materials design.