Oxidation of caspase-8 by hypothiocyanous acid enables TNF-mediated necroptosis.

Necroptosis is a form of regulated cell death triggered by various host and pathogen-derived molecules during infection and inflammation. The essential step leading to necroptosis is phosphorylation of the mixed lineage kinase domain-like protein by receptor-interacting protein kinase 3. Caspase-8 cleaves receptor-interacting protein kinases to block necroptosis, so synthetic caspase inhibitors are required to study this process in experimental models. However, it is unclear how caspase-8 activity is regulated in a physiological setting. The active site cysteine of caspases is sensitive to oxidative inactivation, so we hypothesized that oxidants generated at sites of inflammation can inhibit caspase-8 and promote necroptosis. Here, we discovered that hypothiocyanous acid (HOSCN), an oxidant generated in vivo by heme peroxidases including myeloperoxidase and lactoperoxidase, is a potent caspase-8 inhibitor. We found HOSCN was able to promote necroptosis in mouse fibroblasts treated with tumor necrosis factor. We also demonstrate purified caspase-8 was inactivated by low concentrations of HOSCN, with the predominant product being a disulfide-linked dimer between Cys360 and Cys409 of the large and small catalytic subunits. We show oxidation still occurred in the presence of reducing agents, and reduction of the dimer was slow, consistent with HOSCN being a powerful physiological caspase inhibitor. While the initial oxidation product is a dimer, further modification also occurred in cells treated with HOSCN, leading to higher molecular weight caspase-8 species. Taken together, these findings indicate major disruption of caspase-8 function and suggest a novel mechanism for the promotion of necroptosis at sites of inflammation.

Physiologically Important Electrolytes as Regulators of TDP-43 Aggregation and Droplet-Phase Behavior.

Intraneuronal aggregation of TDP-43 is seen in 97% of all amyotrophic lateral sclerosis cases and occurs by a poorly understood mechanism. We developed a simple in vitro model system for the study of full-length TDP-43 aggregation in solution and in protein droplets. We found that soluble, YFP-tagged full-length TDP-43 (yTDP-43) dimers can be produced by refolding in low-salt HEPES buffer; these solutions are stable for several weeks. We found that physiological electrolytes induced reversible aggregation of yTDP-43 into 10-50 nm tufted particles, without amyloid characteristics. The order of aggregation induction potency was K+ < Na+ < Mg2+ < Ca2+, which is the reverse of the Hofmeister series. The kinetics of aggregation were fit to a single-step model, and the apparent rate of aggregation was affected by yTDP-43 and NaCl concentrations. While yTDP-43 alone did not form stable liquid droplets, it partitioned into preformed Ddx4N1 droplets, showing dynamic diffusion behavior consistent with liquid-liquid phase transition, but then aggregated over time. Aggregation of yTDP-43 in droplets also occurred rapidly in response to changes in electrolyte concentrations, mirroring solution behavior. This was accompanied by changes to droplet localization and solvent exchange. Exposure to extracellular-like electrolyte conditions caused rapid aggregation at the droplet periphery. The aggregation behavior of yTDP-43 is controlled by ion-specific effects that occur at physiological concentrations, suggesting a mechanistic role for local electrolyte concentrations in TDP-43 proteinopathies.

Self-assembly of functional, amphipathic amyloid monolayers by the fungal hydrophobin EAS.

The hydrophobin EAS from the fungus Neurospora crassa forms functional amyloid fibrils called rodlets that facilitate spore formation and dispersal. Self-assembly of EAS into fibrillar rodlets occurs spontaneously at hydrophobic:hydrophilic interfaces and the rodlets further associate laterally to form amphipathic monolayers. We have used site-directed mutagenesis and peptide experiments to identify the region of EAS that drives intermolecular association and formation of the cross-ß rodlet structure. Transplanting this region into a nonamyloidogenic hydrophobin enables it to form rodlets. We have also determined the structure and dynamics of an EAS variant with reduced rodlet-forming ability. Taken together, these data allow us to pinpoint the conformational changes that take place when hydrophobins self-assemble at an interface and to propose a model for the amphipathic EAS rodlet structure.

Solid-state NMR structure determination from diagonal-compensated, sparsely nonuniform-sampled 4D proton-proton restraints.

We report acquisition of diagonal-compensated protein structural restraints from four-dimensional solid-state NMR spectra on extensively deuterated and (1)H back-exchanged proteins. To achieve this, we use homonuclear (1)H-(1)H correlations with diagonal suppression and nonuniform sampling (NUS). Suppression of the diagonal allows the accurate identification of cross-peaks which are otherwise obscured by the strong autocorrelation or whose intensity is biased due to partial overlap with the diagonal. The approach results in unambiguous spectral interpretation and relatively few but reliable restraints for structure calculation. In addition, the diagonal suppression produces a spectrum with low dynamic range for which ultrasparse NUS data sets can be readily reconstructed, allowing straightforward application of NUS with only 2% sampling density with the advantage of more heavily sampling time-domain regions of high signal intensity. The method is demonstrated here for two proteins, α-spectrin SH3 microcrystals and hydrophobin functional amyloids. For the case of SH3, suppression of the diagonal results in facilitated identification of unambiguous restraints and improvement of the quality of the calculated structural ensemble compared to nondiagonal-suppressed 4D spectra. For the only partly assigned hydrophobin rodlets, the structure is yet unknown. Applied to this protein of biological significance with large inhomogeneous broadening, the method allows identification of unambiguous crosspeaks that are otherwise obscured by the diagonal.

A new lysine biosynthetic enzyme from a bacterial endosymbiont shaped by genetic drift and genome reduction.

The effect of population bottlenecks and genome reduction on enzyme function is poorly understood. Candidatus Liberibacter solanacearum is a bacterium with a reduced genome that is transmitted vertically to the egg of an infected psyllid-a population bottleneck that imposes genetic drift and is predicted to affect protein structure and function. Here, we define the function of Ca. L. solanacearum dihydrodipicolinate synthase (CLsoDHDPS), which catalyzes the committed branchpoint reaction in diaminopimelate and lysine biosynthesis. We demonstrate that CLsoDHDPS is expressed in Ca. L. solanacearum and expression is increased ~2-fold in the insect host compared to in planta. CLsoDHDPS has decreased thermal stability and increased aggregation propensity, implying mutations have destabilized the enzyme but are compensated for through elevated chaperone expression and a stabilized oligomeric state. CLsoDHDPS uses a ternary-complex kinetic mechanism, which is to date unique among DHDPS enzymes, has unusually low catalytic ability, but an unusually high substrate affinity. Structural studies demonstrate that the active site is more open, and the structure of CLsoDHDPS with both pyruvate and the substrate analogue succinic-semialdehyde reveals that the product is both structurally and energetically different and therefore evolution has in this case fashioned a new enzyme. Our study suggests the effects of genome reduction and genetic drift on the function of essential enzymes and provides insights on bacteria-host co-evolutionary associations. We propose that bacteria with endosymbiotic lifestyles present a rich vein of interesting enzymes useful for understanding enzyme function and/or informing protein engineering efforts.

Amyloid formation and depolymerization of tumor suppressor p16INK4a are regulated by a thiol-dependent redox mechanism.

The conversion of a soluble protein into polymeric amyloid structures is a process that is poorly understood. Here, we describe a fully redox-regulated amyloid system in which cysteine oxidation of the tumor suppressor protein p16INK4a leads to rapid amyloid formation. We identify a partially-structured disulfide-bonded dimeric intermediate species that subsequently assembles into fibrils. The stable amyloid structures disassemble when the disulfide bond is reduced. p16INK4a is frequently mutated in cancers and is considered highly vulnerable to single-point mutations. We find that multiple cancer-related mutations show increased amyloid formation propensity whereas mutations stabilizing the fold prevent transition into amyloid. The complex transition into amyloids and their structural stability is therefore strictly governed by redox reactions and a single regulatory disulfide bond.

Surface functionalization of carbon nanomaterials by self-assembling hydrophobin proteins.

Class I fungal hydrophobins are small surface-active proteins that self-assemble to form amphipathic monolayers composed of amyloid-like rodlets. The monolayers are extremely robust and can adsorb onto both hydrophobic and hydrophilic surfaces to reverse their wettability. This adherence is particularly strong for hydrophobic materials. In this report, we show that the class I hydrophobins EAS and HYD3 can self-assemble to form a single-molecule thick coating on a range of nanomaterials, including single-walled carbon nanotubes (SWCNTs), graphene sheets, highly oriented pyrolytic graphite, and mica. Moreover, coating by class I hydrophobin results in a stable, dispersed preparation of SWCNTs in aqueous solutions. No cytotoxicity is detected when hydrophobin or hydrophobin-coated SWCNTs are incubated with Caco-2 cells in vitro. In addition, we are able to specifically introduce covalently linked chemical moieties to the hydrophilic side of the rodlet monolayer. Hence, class I hydrophobins provide a simple and effective strategy for controlling the surfaces of a range of materials at a molecular level and exhibit strong potential for biomedical applications.

Recruitment of class I hydrophobins to the air:water interface initiates a multi-step process of functional amyloid formation.

Class I fungal hydrophobins form amphipathic monolayers composed of amyloid rodlets. This is a remarkable case of functional amyloid formation in that a hydrophobic:hydrophilic interface is required to trigger the self-assembly of the proteins. The mechanism of rodlet formation and the role of the interface in this process have not been well understood. Here, we have studied the effect of a range of additives, including ionic liquids, alcohols, and detergents, on rodlet formation by two class I hydrophobins, EAS and DewA. Although the conformation of the hydrophobins in these different solutions is not altered, we observe that the rate of rodlet formation is slowed as the surface tension of the solution is decreased, regardless of the nature of the additive. These results suggest that interface properties are of critical importance for the recruitment, alignment, and structural rearrangement of the amphipathic hydrophobin monomers. This work gives insight into the forces that drive macromolecular assembly of this unique family of proteins and allows us to propose a three-stage model for the interface-driven formation of rodlets.

Solid-state NMR spectroscopy of functional amyloid from a fungal hydrophobin: a well-ordered ß-sheet core amidst structural heterogeneity.

GrEASy fibrils: Hydrophobins are fungal proteins that assemble into an amphipathic fibrillar monolayer with amyloid properties and a hydrophobic face as water-resistant as Teflon. Solid-state NMR studies on EAS hydrophobin fibrils reveal direct evidence of a partial molecular rearrangement on assembly and an ordered ß-sheet-rich core in the context of a whole protein in this functional amyloid.

Fermentation of plant-based dairy alternatives by lactic acid bacteria.

Ethical, environmental and health concerns around dairy products are driving a fast-growing industry for plant-based dairy alternatives, but undesirable flavours and textures in available products are limiting their uptake into the mainstream. The molecular processes initiated during fermentation by lactic acid bacteria in dairy products is well understood, such as proteolysis of caseins into peptides and amino acids, and the utilisation of carbohydrates to form lactic acid and exopolysaccharides. These processes are fundamental to developing the flavour and texture of fermented dairy products like cheese and yoghurt, yet how these processes work in plant-based alternatives is poorly understood. With this knowledge, bespoke fermentative processes could be engineered for specific food qualities in plant-based foods. This review will provide an overview of recent research that reveals how fermentation occurs in plant-based milk, with a focus on how differences in plant proteins and carbohydrate structure affect how they undergo the fermentation process. The practical aspects of how this knowledge has been used to develop plant-based cheeses and yoghurts is also discussed.

Neutrophil-vascular interactions drive myeloperoxidase accumulation in the brain in Alzheimer's disease.

INTRODUCTION: Neutrophil accumulation is a well-established feature of Alzheimer's disease (AD) and has been linked to cognitive impairment by modulating disease-relevant neuroinflammatory and vascular pathways. Neutrophils express high levels of the oxidant-generating enzyme myeloperoxidase (MPO), however there has been controversy regarding the cellular source and localisation of MPO in the AD brain. MATERIALS AND METHODS: We used immunostaining and immunoassays to quantify the accumulation of neutrophils in human AD tissue microarrays and in the brains of APP/PS1 mice. We also used multiplexed immunolabelling to define the presence of NETs in AD. RESULTS: There was an increase in neutrophils in AD brains as well as in the murine APP/PS1 model of AD. Indeed, MPO expression was almost exclusively confined to S100A8-positive neutrophils in both human AD and murine APP/PS1 brains. The vascular localisation of neutrophils in both human AD and mouse models of AD was striking and driven by enhanced neutrophil adhesion to small vessels. We also observed rare infiltrating neutrophils and deposits of MPO around plaques. Citrullinated histone H3, a marker of neutrophil extracellular traps (NETs), was also detected in human AD cases at these sites, indicating the presence of extracellular MPO in the vasculature. Finally, there was a reduction in the endothelial glycocalyx in AD that may be responsible for non-productive neutrophil adhesion to the vasculature. CONCLUSION: Our report indicates that vascular changes may drive neutrophil adhesion and NETosis, and that neutrophil-derived MPO may lead to vascular oxidative stress and be a relevant therapeutic target in AD.

Formation of Amphipathic Amyloid Monolayers from Fungal Hydrophobin Proteins.

The fungal hydrophobins are small proteins that are able to self-assemble spontaneously into amphipathic monolayers at hydrophobic:hydrophilic interfaces. These protein monolayers can reverse the wettability of a surface, making them suitable for increasing the biocompatibility of many hydrophobic nanomaterials. One subgroup of this family, the class I hydrophobins, forms monolayers that are composed of extremely robust amyloid-like fibrils, called rodlets. Here, we describe the protocols for the production and purification of recombinant hydrophobins and oxidative refolding to a biologically active, soluble, monomeric form. We describe methods to trigger the self-assembly into the fibrillar rodlet state and techniques to characterize the physicochemical properties of the polymeric forms.

Cysteine oxidation triggers amyloid fibril formation of the tumor suppressor p16INK4A.

The tumor suppressor p16INK4A induces cell cycle arrest and senescence in response to oncogenic transformation and is therefore frequently lost in cancer. p16INK4A is also known to accumulate under conditions of oxidative stress. Thus, we hypothesized it could potentially be regulated by reversible oxidation of cysteines (redox signaling). Here we report that oxidation of the single cysteine in p16INK4A in human cells occurs under relatively mild oxidizing conditions and leads to disulfide-dependent dimerization. p16INK4A is an all α-helical protein, but we find that upon cysteine-dependent dimerization, p16INK4A undergoes a dramatic structural rearrangement and forms aggregates that have the typical features of amyloid fibrils, including binding of diagnostic dyes, presence of cross-ß sheet structure, and typical dimensions found in electron microscopy. p16INK4A amyloid formation abolishes its function as a Cyclin Dependent Kinase 4/6 inhibitor. Collectively, these observations mechanistically link the cellular redox state to the inactivation of p16INK4A through the formation of amyloid fibrils.

The neuronal S100B protein is a calcium-tuned suppressor of amyloid-ß aggregation.

Amyloid-ß (Aß) aggregation and neuroinflammation are consistent features in Alzheimer's disease (AD) and strong candidates for the initiation of neurodegeneration. S100B is one of the most abundant proinflammatory proteins that is chronically up-regulated in AD and is found associated with senile plaques. This recognized biomarker for brain distress may, thus, play roles in amyloid aggregation which remain to be determined. We report a novel role for the neuronal S100B protein as suppressor of Aß42 aggregation and toxicity. We determined the structural details of the interaction between monomeric Aß42 and S100B, which is favored by calcium binding to S100B, possibly involving conformational switching of disordered Aß42 into an α-helical conformer, which locks aggregation. From nuclear magnetic resonance experiments, we show that this dynamic interaction occurs at a promiscuous peptide-binding region within the interfacial cleft of the S100B homodimer. This physical interaction is coupled to a functional role in the inhibition of Aß42 aggregation and toxicity and is tuned by calcium binding to S100B. S100B delays the onset of Aß42 aggregation by interacting with Aß42 monomers inhibiting primary nucleation, and the calcium-bound state substantially affects secondary nucleation by inhibiting fibril surface-catalyzed reactions through S100B binding to growing Aß42 oligomers and fibrils. S100B protects cells from Aß42-mediated toxicity, rescuing cell viability and decreasing apoptosis induced by Aß42 in cell cultures. Together, our findings suggest that molecular targeting of S100B could be translated into development of novel approaches to ameliorate AD neurodegeneration.

Epigallocatechin-3-gallate preferentially induces aggregation of amyloidogenic immunoglobulin light chains.

Antibody light chain amyloidosis is a rare disease caused by fibril formation of secreted immunoglobulin light chains (LCs). The huge variety of antibody sequences puts a serious challenge to drug discovery. The green tea polyphenol epigallocatechin-3-gallate (EGCG) is known to interfere with fibril formation in general. Here we present solution- and solid-state NMR studies as well as MD simulations to characterise the interaction of EGCG with LC variable domains. We identified two distinct EGCG binding sites, both of which include a proline as an important recognition element. The binding sites were confirmed by site-directed mutagenesis and solid-state NMR analysis. The EGCG-induced protein complexes are unstructured. We propose a general mechanistic model for EGCG binding to a conserved site in LCs. We find that EGCG reacts selectively with amyloidogenic mutants. This makes this compound a promising lead structure, that can handle the immense sequence variability of antibody LCs.

Fungal Hydrophobin Proteins Produce Self-Assembling Protein Films with Diverse Structure and Chemical Stability.

Hydrophobins are small proteins secreted by fungi and which spontaneously assemble into amphipathic layers at hydrophilic-hydrophobic interfaces. We have examined the self-assembly of the Class I hydrophobins EAS∆15 and DewA, the Class II hydrophobin NC2 and an engineered chimeric hydrophobin. These Class I hydrophobins form layers composed of laterally associated fibrils with an underlying amyloid structure. These two Class I hydrophobins, despite showing significant conformational differences in solution, self-assemble to form fibrillar layers with very similar structures and require a hydrophilic-hydrophobic interface to trigger self-assembly. Addition of additives that influence surface tension can be used to manipulate the fine structure of the protein films. The Class II hydrophobin NC2 forms a mesh-like protein network and the engineered chimeric hydrophobin displays two multimeric forms, depending on assembly conditions. When formed on a graphite surface, the fibrillar EAS∆15 layers are resistant to alcohol, acid and basic washes. In contrast, the NC2 Class II monolayers are dissociated by alcohol treatment but are relatively stable towards acid and base washes. The engineered chimeric Class I/II hydrophobin shows increased stability towards alcohol and acid and base washes. Self-assembled hydrophobin films may have extensive applications in biotechnology where biocompatible; amphipathic coatings facilitate the functionalization of nanomaterials.

Formation of amphipathic amyloid monolayers from fungal hydrophobin proteins.

The fungal hydrophobins are small proteins that are able to spontaneously self-assemble into amphipathic monolayers at hydrophobic:hydrophilic interfaces. These protein monolayers can reverse the wettability of a surface, making them suitable for increasing the biocompatibility of many hydrophobic nanomaterials. One subgroup of this family, the class I hydrophobins, forms monolayers that are composed of extremely robust amyloid-like fibrils, called rodlets. Here we describe protocols for the production and purification of recombinant hydrophobins and oxidative refolding to a biologically active, soluble, monomeric form. We describe methods to trigger self-assembly into the fibrillar rodlet state and techniques to characterize the physicochemical properties of the polymeric forms.

Analysis of the structure and conformational states of DewA gives insight into the assembly of the fungal hydrophobins.

The hydrophobin DewA from the fungus Aspergillus nidulans is a highly surface-active protein that spontaneously self-assembles into amphipathic monolayers at hydrophobic:hydrophilic interfaces. These monolayers are composed of fibrils that are a form of functional amyloid. While there has been significant interest in the use of DewA for a variety of surface coatings and as an emulsifier in biotechnological applications, little is understood about the structure of the protein or the mechanism of self-assembly. We have solved the solution NMR structure of DewA. While the pattern of four disulfide bonds that is a defining feature of hydrophobins is conserved, the arrangement and composition of secondary-structure elements in DewA are quite different to what has been observed in other hydrophobin structures. In addition, we demonstrate that DewA populates two conformations in solution, both of which are assembly competent. One conformer forms a dimer at high concentrations, but this dimer is off-pathway to fibril formation and may represent an assembly control mechanism. These data highlight the structural differences between fibril-forming hydrophobins and those that form amorphous monolayers. This work will open up new opportunities for the engineering of hydrophobins with novel biotechnological applications.

Backbone and sidechain ¹H, ¹³C and ¹5N chemical shift assignments of the hydrophobin DewA from Aspergillus nidulans.

Hydrophobins are proteins secreted by filamentous fungi that are able to self-assemble into monolayers at hydrophobic:hydrophilic interfaces. The layers are amphipathic and can reverse the wettability of surfaces. Hydrophobins have several roles in fungal development, including the formation of coatings on fungal structures to render them hydrophobic. Here we report the backbone and sidechain assignments for the class I hydrophobin DewA from the fungus Aspergillus nidulans.

The Cys3-Cys4 loop of the hydrophobin EAS is not required for rodlet formation and surface activity.

Class I hydrophobins are fungal proteins that self-assemble into robust amphipathic rodlet monolayers on the surface of aerial structures such as spores and fruiting bodies. These layers share many structural characteristics with amyloid fibrils and belong to the growing family of functional amyloid-like materials produced by microorganisms. Although the three-dimensional structure of the soluble monomeric form of a class I hydrophobin has been determined, little is known about the molecular structure of the rodlets or their assembly mechanism. Several models have been proposed, some of which suggest that the Cys3-Cys4 loop has a critical role in the initiation of assembly or in the polymeric structure. In order to provide insight into the relationship between hydrophobin sequence and rodlet assembly, we investigated the role of the Cys3-Cys4 loop in EAS, a class I hydrophobin from Neurospora crassa. Remarkably, deletion of up to 15 residues from this 25-residue loop does not impair rodlet formation or reduce the surface activity of the protein, and the physicochemical properties of rodlets formed by this mutant are indistinguishable from those of its full-length counterpart. In addition, the core structure of the truncation mutant is essentially unchanged. Molecular dynamics simulations carried out on the full-length protein and this truncation mutant binding to an air-water interface show that, although it is hydrophobic, the loop does not play a role in positioning the protein at the surface. These results demonstrate that the Cys3-Cys4 loop does not have an integral role in the formation or structure of the rodlets and that the major determinant of the unique properties of these proteins is the amphipathic core structure, which is likely to be preserved in all hydrophobins despite the high degree of sequence variation across the family.