ABSTRACT
Poly(ethylene glycol), PEG, known to inhibit protein adsorption, is widely used on the surfaces of biomedical devices when biofilm formation is undesirable. Poly(desaminotyrosyl-tyrosine ethyl ester carbonate), PDTEC, PC for short, has been a promising coating polymer for insertion devices, and it has been anticipated that PEG plays a similar role if it is copolymerized with PC. Earlier studies show that no fibrinogen (Fg) is adsorbed onto PC polymers with PEG beyond the threshold weight percentage. This is attributed to the phase separation of PEG. Further, iodination of the PC units in the PC polymer, (I2PC), has been found to counteract this Fg-repulsive effect by PEG. In this study, we employ surface-sensitive X-ray techniques to demonstrate the surface affinity of Fg toward the air-water interface, particularly in the presence of self-assembled PC-based film, in which its constituent polymer units are assumed to be much more mobile as a free-standing film. Fg is found to form a Gibbs monolayer with its long axis parallel to the aqueous surface, thus maximizing its interactions with hydrophobic interfaces. It influences the amount of insoluble, surface-bound I2PC likely due to the desorption of the formed Fg-I2PC complex and/or the penetration of Fg onto the I2PC film. The results show that the phase behavior at the liquid-polymer interface shall be taken into account for the surface behavior of bulk polymers surrounded by tissue. The ability of PEG units rearranging into a protein-blocking layer, rather than its mere presence in the polymer, is the key to antifouling characteristics desired for polymeric coating on insertion devices.
Subject(s)
Fibrinogen , Polymers , Adsorption , Polymers/chemistry , Fibrinogen/chemistry , Halogenation , Polyethylene Glycols/chemistry , Water/chemistry , Surface PropertiesABSTRACT
Parkinson's disease (PD) affects 1-2% of people over 65, causing significant morbidity across a progressive disease course. The classic PD motor deficits are caused by the degeneration of dopaminergic neurons in the substantia nigra pars compacta (SNpc), resulting in the loss of their long-distance axonal projections that modulate striatal output. While contemporary treatments temporarily alleviate symptoms of this disconnection, there is no approach able to replace the nigrostriatal pathway. We applied microtissue engineering techniques to create a living, implantable tissue-engineered nigrostriatal pathway (TE-NSP) that mimics the architecture and function of the native pathway. TE-NSPs comprise a discrete population of dopaminergic neurons extending long, bundled axonal tracts within the lumen of hydrogel micro-columns. Neurons were isolated from the ventral mesencephalon of transgenic rats selectively expressing the green fluorescent protein in dopaminergic neurons with subsequent fluorescent-activated cell sorting to enrich a population to 60% purity. The lumen extracellular matrix and growth factors were varied to optimize cytoarchitecture and neurite length, while immunocytochemistry and fast-scan cyclic voltammetry (FSCV) revealed that TE-NSP axons released dopamine and integrated with striatal neurons in vitro. Finally, TE-NSPs were implanted to span the nigrostriatal pathway in a rat PD model with a unilateral 6-hydroxydopamine SNpc lesion. Immunohistochemistry and FSCV established that transplanted TE-NSPs survived, maintained their axonal tract projections, extended dopaminergic neurites into host tissue, and released dopamine in the striatum. This work showed proof of concept that TE-NSPs can reconstruct the nigrostriatal pathway, providing motivation for future studies evaluating potential functional benefits and long-term durability of this strategy. This pathway reconstruction strategy may ultimately replace lost neuroarchitecture and alleviate the cause of motor symptoms for PD patients.
Subject(s)
Parkinson Disease , Rats , Animals , Parkinson Disease/pathology , Substantia Nigra/metabolism , Dopamine/metabolism , Axons/metabolism , Dopaminergic Neurons/metabolismABSTRACT
Degradable polymers are often desirable for the fabrication of medical implants, but thermal processing of these polymers is a challenge. We describe here how these problems can be addressed by discussing the extrusion of fibers and injection molding of bone pins from a hydrolytically degradable tyrosine-derived polycarbonate. Our initial attempts produced fibers and pins with bubbles, voids, and discoloration, and resulted in the formation of large polymer plugs that seized screws and blocked extruder dies. The material and process parameters that contribute to these issues were investigated by studying the physical and chemical changes that occur during processing. Differential scanning calorimetry (DSC) scans and thermogravimetric analysis combined with IR (TGA-IR) analysis revealed the role of residual moisture and residual solvents that in conjunction with heat cause degradation and crosslinking as indicated by gel permeation chromatography (GPC). Rheology and melt-flow index measurements were useful in characterizing the extent of dependence of polymer viscosity on temperature and molecular weight. With these insights, we could process our polymer into fibers and rods by controlling residual moisture, time and temperature, and by adjusting processing parameters in real-time. The systematic approach described here is applicable to other degradable polymers that are difficult to process.
ABSTRACT
Polymeric nanospheres have the ability to encapsulate drugs and are therefore widely used in drug delivery applications. Structural transformations that affect drug release from nanospheres are governed by the surrounding environment. To understand these effects, we investigated the adsorption behavior of three types of nanospheres onto model surfaces using quartz crystal microbalance with dissipation (QCM-D) and by atomic force microscopy (AFM). Substrates were prepared from polymers with different degrees of PEGylation (0, 1, and 15%). Nanospheres were prepared via self-assembly of block copolymers. Tyrosine-derived nanospheres are A-B-A triblock copolymers with methoxy poly(ethylene glycol) (PEG) as the A-blocks and an alternating copolymer of desaminotyrosyl-tyrosine octyl ester and suberic acid oligo(DTO-SA) as the B-block. On non-PEGylated substrates, these nanospheres assembled into a close-packed structure; on PEGylated substrates, the adsorbed nanospheres formed a continuous film, thinner than the size of the nanospheres suggesting unraveling of the PEG corona and disassembly of the nanospheres. Also, the adsorption was concentration-dependent, the final thickness being attained at exponentially longer times at lower concentrations. Such substrate- and concentration-dependent behavior was not observed with Pluronic F-127 and PEG-poly(caprolactone) (PCL) nanospheres. Since the essential difference among the three nanospheres is the composition of the core, we conclude that the core influences the adsorption characteristics of the nanospheres as a consequence of their disassembly upon adsorption. These results are expected to be useful in designing nanospheres for their efficient transport across vascular barriers and for delivering drugs to their targets.
Subject(s)
Nanospheres/chemistry , Polyethylene Glycols/chemistry , Adsorption , Microscopy, Atomic Force , Molecular Structure , Particle Size , Polyethylene Glycols/chemical synthesis , Quartz Crystal Microbalance Techniques , Surface PropertiesABSTRACT
Intermediate filaments (IFs) are ubiquitous in biological structures including hair. Small-angle neutron scattering (SANS) data from hydrated samples were used in this study to investigate the distribution of water in hair, and model the structure of the IF assembly. A main diffraction peak at a d-spacing of â¼90â¯Å, and two weaker reflections show that IFs are arranged in a â¼105â¯Å quasi-hexagonal lattice. Changes in the diffraction peaks show that only a small fraction of the water absorbed by hair enters between the IFs, and little water diffuses into the core of the IFs. The amount of water in the IF assembly increases rapidly up to 10% relative humidity (RH), and then slowly with further increase in RH. Most of the water appears to reside outside the IF assembly, in the voids and at the interfaces, and contribute to the central diffuse scattering. The IF assembly in the decuticled hair absorbs more water and is more ordered than that the native hair. This suggests that cuticle acts as a barrier, and might constrain the structure by compressing the cortex radially. Treatments with oils that are hydrophobic, heat treatment, and reduction of the S-S linkages that opens up the matrix by disulfide bond cleavage, all affect structure and water permeability. Coconut oil was found to impede hydration more than the soybean oil because of its ability to penetrate deeper into hair. A new model for the IF assembly that is sterically more favorable than the previous models is proposed.
Subject(s)
Hair/ultrastructure , Intermediate Filaments/ultrastructure , Water/chemistry , Coconut Oil/chemistry , Coconut Oil/pharmacology , Hair/chemistry , Humans , Intermediate Filaments/chemistry , Keratins/chemistry , Keratins/ultrastructure , Neutron Diffraction/methods , Neutrons , Permeability/drug effects , Scattering, Small Angle , Soybean Oil/chemistry , Soybean Oil/pharmacology , X-Ray DiffractionABSTRACT
Proteins adsorbed onto biomaterial surfaces facilitate cell-material interactions, including adhesion and migration. Of particular importance are provisional matrix components, fibrinogen (Fg) and fibronectin (Fn), which play an important role in the wound-healing process. Here, to assess the potential of a series of elastomeric poly(butylene succinate) (PBS) copolymers for soft tissue engineering and regenerative medicine applications, we examined the adsorption of Fg and Fn. We prepared spin-coated thin films of the poly(butylene succinate) homopolymer and a series of elastomeric poly(butylene succinate) copolymers with butylene succinate (PBS, hard segment) to succinate-dimer linoleic diol unit (dilinoleic succinate (DLS), soft segments) weight ratios of 70:30, 60:40, and 50:50. X-ray diffraction was used to assess crystallinity, whereas the obtained thin films were characterized using a quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy. Protein adsorption was assessed using QCM-D, followed by data analysis using viscoelastic modeling. On all three copolymers, we observed robust adsorption of both key provisional matrix proteins. Importantly, for both proteins, viscoelastic modeling determined that the adlayers were 30-40 nm thick and had low shear modulus values (<25 kPa), thus indicating soft orientations (end-on for Fg) or conformations (open for Fn) of the hydrated proteins. Overall, our results are very encouraging, as they predict excellent cell adhesion and migration, key features enabling tissue integration of potential PBS-DLS scaffolds.
Subject(s)
Butylene Glycols/chemistry , Elastomers/chemistry , Fibrinogen/chemistry , Fibronectins/chemistry , Polymers/chemistry , Adsorption , Particle Size , Surface PropertiesABSTRACT
Poly(ethylene glycol) (PEG) is widely used to modulate the hydration states of biomaterials and is often applied to produce nonfouling surfaces. Here, we present X-ray scattering data, which show that it is the surface segregation of PEG, not just its presence in the bulk, that makes this happen by influencing the hydrophilicity of PEG-containing substrates. We demonstrate a temperature-dependent trigger that transforms a PEG-containing substrate from a protein-adsorbing to a protein-repelling state. On films of poly(desaminotyrosyl-tyrosine-co-PEG carbonate) with high (20 wt %) PEG content, in which very little protein adsorption is expected, quartz crystal microbalance data showed significant adsorption of fibrinogen and bovine serum albumin at 8 °C. The surface became protein-repellent at 37.5 °C. When the same polymer was iodinated, the polymer was protein-adsorbent, even when 37 wt % PEG was incorporated into the polymer backbone. This demonstrates that high PEG content by itself is not sufficient to repel proteins. By inhibiting phase separation either with iodine or by lowering the temperature, we show that PEG must phase-separate and bloom to the surface to create an antifouling surface. These results suggest an opportunity to design materials with high PEG content that can be switched from a protein-attractant to a protein-repellent state by inducing phase separation through brief exposure to temperatures above their glass transition temperature.
Subject(s)
Polyethylene Glycols/chemistry , Proteins/chemistry , Temperature , Adsorption , Animals , Fibrinogen/chemistry , Fibrinogen/isolation & purification , Hydrophobic and Hydrophilic Interactions , Pressure , Proteins/isolation & purification , Serum Albumin, Bovine/chemistry , Serum Albumin, Bovine/isolation & purificationABSTRACT
The structure of nanospheres with a crystalline core and an amorphous diffuse shell was investigated by small-angle neutron scattering (SANS), small-, medium-, and wide-angle X-ray scattering (SAXS, MAXS and WAXS), and differential scanning calorimetry (DSC). Nanospheres, 28 to 35 nm in diameter, were prepared from a triblock copolymer with poly(ethylene glycol) (PEG) hydrophilic end-blocks and oligomers of alternating desaminotyrosyl-tyrosine octyl ester (DTO) and suberic acid (SA) as the central hydrophobic block. In the lyophilized nanospheres, the diffraction patterns show that the PEG shell is â¼10 nm in thickness and crystalline, and the hydrophobic core is â¼10 nm in diameter with a smectic liquid crystalline texture. In aqueous dispersions, the hydrated PEG forms an amorphous shell, but the crystalline phase in the core persists at concentrations down to 1 mg ml-1 as evidenced by the sharp MAXS diffraction peak at a d-spacing of 24.4 Å and a melting endotherm at 40 °C. As the dispersion is diluted (<1 mg ml-1), the core becomes less ordered, and its diameter decreases by 50% even though the overall size of the nanosphere remains essentially unchanged. It is likely that below a critical concentration, intermixing of hydrophobic segments with the PEG segments reduces the size and the crystallinity of the core. At these concentrations, the PEG corona forms a eutectic with water. The mechanisms by which the concentration of the dispersion influences the structure of the nanospheres, and consequently their drug-release characteristics, are discussed.
Subject(s)
Drug Carriers/chemistry , Hydrophobic and Hydrophilic Interactions , Nanospheres/chemistry , Polyethylene Glycols/chemistry , Drug Liberation , Hydrogen-Ion Concentration , MicellesABSTRACT
The role of a nonsolvent in controlling the crystallization and morphology of solvent-crystallized poly(l-lactide) (PLLA) films was investigated using various microscopy techniques and small- and wide-angle X-ray scattering (SAXS/WAXS). PLLA films crystallized in THF and acetone had 40-80 µm spherulites. When water was present in the solvent, a completely different morphology was observed with nanosized voids and the surfaces of the films were smooth. In contrast, SEM studies revealed that the films crystallized in acetone and THF which had macroporous structures, had larger voids and film surfaces were rough because of the presence of globular structures. Voids appeared within the spherulites in the THF/water treated film, whereas crystals nucleated at the surface of the nanosized voids in acetone/water treated PLLA films. The formation of such voids is attributed to the interface-enhanced crystal nucleation in a solvent/nonsolvent system where the nonsolvent increases the polymer crystal nucleation and the subsequent evaporation of the nonsolvent. The method described in this work can be extended to other polymers to control the morphologies of polymer films during solvent-induced crystallization.
ABSTRACT
Osteoclasts are large multinucleated giant cells that actively resorb bone during the physiological bone turnover (BTO), which is the continuous cycle of bone resorption (by osteoclasts) followed by new bone formation (by osteoblasts). Osteoclasts secrete chemotactic signals to recruit cells for regeneration of vasculature and bone. We hypothesize that a biomaterial that attracts osteoclasts and re-establishes BTO will induce a better healing response than currently used bone graft materials. While the majority of bone regeneration efforts have focused on maximizing bone deposition, the novelty in this approach is the focus on stimulating osteoclastic resorption as the starter for BTO and its concurrent new vascularized bone formation. A biodegradable tyrosine-derived polycarbonate, E1001(1k), was chosen as the polymer base due to its ability to support bone regeneration in vivo. The polymer was functionalized with a RGD peptide or collagen I, or blended with ß-tricalcium phosphate. Osteoclast attachment and early stages of active resorption were observed on all substrates. The transparency of E1001(1k) in combination with high resolution confocal imaging enabled visualization of morphological features of osteoclast activation such as the formation of the "actin ring" and the "ruffled border", which previously required destructive forms of imaging such as transmission electron microscopy. The significance of these results is twofold: (1) E1001(1k) is suitable for osteoclast attachment and supports osteoclast maturation, making it a base polymer that can be further modified to optimize stimulation of BTO and (2) the transparency of this polymer makes it a suitable analytical tool for studying osteoclast behavior.
Subject(s)
Bone Substitutes , Bone Transplantation , Bone and Bones/physiology , Osteoclasts/physiology , Animals , Bone Marrow Cells , Bone Regeneration , Cell Differentiation , Male , Osteoblasts , Rats , Rats, Sprague-DawleyABSTRACT
Porous conduits provide a protected pathway for nerve regeneration, while still allowing exchange of nutrients and wastes. However, pore sizes >30 µm may permit fibrous tissue infiltration into the conduit, which may impede axonal regeneration. Coating the conduit with Fibrin Glue (FG) is one option for controlling the conduit's porosity. FG is extensively used in clinical peripheral nerve repair, as a tissue sealant, filler and drug-delivery matrix. Here, we compared the performance of FG to an alternative, hyaluronic acid (HA) as a coating for porous conduits, using uncoated porous conduits and reverse autografts as control groups. The uncoated conduit walls had pores with a diameter of 60 to 70 µm that were uniformly covered by either FG or HA coatings. In vitro, FG coatings degraded twice as fast as HA coatings. In vivo studies in a 1 cm rat sciatic nerve model showed FG coating resulted in poor axonal density (993 ± 854 #/mm2), negligible fascicular area (0.03 ± 0.04 mm2), minimal percent wet muscle mass recovery (16 ± 1 in gastrocnemius and 15 ± 5 in tibialis anterior) and G-ratio (0.73 ± 0.01). Histology of FG-coated conduits showed excessive fibrous tissue infiltration inside the lumen, and fibrin capsule formation around the conduit. Although FG has been shown to promote nerve regeneration in non-porous conduits, we found that as a coating for porous conduits in vivo, FG encourages scar tissue infiltration that impedes nerve regeneration. This is a significant finding considering the widespread use of FG in peripheral nerve repair.
Subject(s)
Biocompatible Materials , Fibrin Tissue Adhesive/chemistry , Hyaluronic Acid/chemistry , Nerve Regeneration , Sciatic Nerve/metabolism , Animals , Compressive Strength , Cross-Linking Reagents/chemistry , Drug Delivery Systems , Female , Hydrogels/chemistry , Microscopy, Electron, Scanning , Muscle, Skeletal/metabolism , Polymers/chemistry , Porosity , Rats , Rats, Inbred Lew , Stress, MechanicalABSTRACT
Functionalization of surfaces with poly(sodium styrenesulfonate) (poly(NaSS)) has recently been found to enhance osteointegration of implantable materials. Radical polymerization of poly(NaSS) on titanium (Ti)-based substrates has been used to improve their long-term performance by preventing fibrosis and consequently implant loosening. However, the influence of the sulfonate groups on the early cell behavior and the associated molecular phenomena remains to be understood. In this work, we used quartz crystal microbalance with dissipation (QCM-D) to elucidate the role of poly(NaSS) in enhancing osteoblastic cell attachment. This was measured by following the cell attachment using the MC3T3-E1 cell line, on fetal bovine serum (FBS) preadsorbed surfaces and on substrates adsorbed with a series of relevant proteins, bovine serum albumin (BSA), fibronectin (Fn), and collagen type I (Col I). Comparison of the performance of poly(NaSS) with other clinically important substrates such as Ti alloy Ti6Al4V, gold, and poly(desamino-tyrosyl-tyrosine ethyl ester carbonate) (poly(DTEc)) indicates poly(NaSS) to be a superior substrate for MC3T3-E1 cells attachment. This attachment was found to be integrin mediated in the presence of Fn and Col I. Antibodies specific to the RGD peptide and the N- and C-terminal HB-binding domains reacted more intensively with Fn adsorbed on poly(NaSS). Fn adapts a conformation favorable to RGD mediated cell attachment when adsorbed onto poly(NaSS).
Subject(s)
Collagen Type I/chemistry , Fibronectins/chemistry , Osteoblasts/cytology , Polystyrenes/chemistry , 3T3 Cells , Aluminum/chemistry , Animals , Biopolymers/chemistry , Gold/chemistry , Mice , Molecular Conformation , Particle Size , Quartz Crystal Microbalance Techniques , Serum Albumin, Bovine/chemistry , Surface Properties , Titanium/chemistry , Tyrosine/analogs & derivatives , Tyrosine/chemistry , Vanadium/chemistryABSTRACT
Diffusion and distribution of water in hair can reveal the internal structure of hair that determines the penetration of various products used to treat hair. The distribution of water into different morphological components in unmodified hair, cuticle-free hair, and hair saturated with oil at various levels of humidity was examined using small-angle neutron scattering (SANS) by substituting water with deuterium oxide (D(2)O). Infrared spectroscopy was used to follow hydrogen-deuterium exchange. Water present in hair gives basically two types of responses in SANS: (i) interference patterns, and (ii) central diffuse scattering (CDS) around the beam stop. The amount of water in the matrix between the intermediate filaments that gives rise to interference patterns remained essentially constant over the 50-98% humidity range without swelling this region of the fiber extensively. This observation suggests that a significant fraction of water in the hair, which contributes to the CDS, is likely located in a different morphological region of hair that is more like pores in a fibrous structure, which leads to significant additional swelling of the fiber. Comparison of the scattering of hair treated with oil shows that soybean oil, which diffuses less into hair, allows more water into hair than coconut oil. These preliminary results illustrate the utility of SANS for evaluating and understanding the diffusion of deuterated liquids into different morphological structures in hair.
Subject(s)
Hair/chemistry , Neutron Diffraction/methods , Water/chemistry , HumansABSTRACT
Small-angle X-ray and neutron scattering (SAXS and SANS) patterns from certain semicrystalline polymers and liquid crystals contain discrete reflections from ordered assemblies and central diffuse scattering (CDS) from uncorrelated structures. Systems with imperfectly ordered lamellar structures aligned by stretching or by a magnetic field produce four distinct SAXS patterns: two-point 'banana', four-point pattern, four-point 'eyebrow' and four-point 'butterfly'. The peak intensities of the reflections lie not on a layer line, or the arc of a circle, but on an elliptical trajectory. Modeling shows that randomly placed lamellar stacks modified by chain slip and stack rotation or interlamellar shear can create these forms. On deformation, the isotropic CDS becomes an equatorial streak with an oval, diamond or two-bladed propeller shape, which can be analyzed by separation into isotropic and oriented components. The streak has elliptical intensity contours, a natural consequence of the imperfect alignment of the elongated scattering objects. Both equatorial streaks and two- and four-point reflections can be fitted in elliptical coordinates with relatively few parameters. Equatorial streaks can be analyzed to obtain the size and orientation of voids, fibrils or surfaces. Analyses of the lamellar reflection yield lamellar spacing, stack orientation (interlamellar shear) angle α and chain slip angle Ï, as well as the size distribution of the lamellar stacks. Currently available computational tools allow these microstructural parameters to be rapidly refined.
ABSTRACT
Stereoselectivity is a hallmark of biomolecular processes from catalysis to self-assembly, which predominantly occur between homochiral species. However, both homochiral and heterochiral complexes of synthetic polypeptides have been observed where stereoselectivity hinges on details of intermolecular interactions. This raises the question whether general rules governing stereoselectivity exist. A geometric ridges-in-grooves model of interacting helices indicates that heterochiral associations should generally be favored in this class of structures. We tested this principle using a simplified molecular screw, a collagen peptide triple-helix composed of either l- or d-proline with a cyclic aliphatic side chain. Calculated stabilities of like- and opposite-handed triple-helical pairings indicated a preference for heterospecific associations. Mixing left- and right-handed helices drastically lowered solubility, resulting in micrometer-scale sheet-like assemblies that were one peptide-length thick as characterized with atomic force microscopy. X-ray scattering measurements of interhelical spacing in these sheets support a tight ridges-in-grooves packing of left- and right-handed triple helices.
Subject(s)
Stereoisomerism , Microscopy, Atomic Force , Microscopy, Electron, Transmission , Scattering, Radiation , SolubilityABSTRACT
Three representative polymers of increasing modulus, poly(d,l-lactic acid), PDLLA, poly(desaminotyrosyl-tyrosine ethyl ester carbonate), PDTEC, and the same polymer with iodinated DTE segments, PI2DTEC, were characterized by surface-pressure versus area (Π-A) isotherms and surface sensitive X-ray diffraction techniques. Films of 10-100 Å thickness were prepared for these studies by spreading dilute polymer solutions at air-water interfaces. The general properties of the isotherms and the Flory exponents, determined from the isotherms, vary in accordance with the increasing modulus of PDLLA, PDTEC, PI2DTEC, respectively. The analysis of in situ X-ray reflectivity and grazing incidence X-ray diffraction (GIXD) measurements from films at aqueous surfaces provides a morphological picture that is consistent with the modulus of the polymers, and to a large extent, with their packing in their dry-bulk state. Large absorption of X-rays by iodine enabled X-ray spectroscopic studies under near-total-reflection conditions to determine the iodine distribution in the PI2DTEC film and complement the structural model derived from reflectivity and GIXD. These structural studies lay the foundation for future studies of polymer-protein interactions at aqueous interfaces.
Subject(s)
Polycarboxylate Cement/chemistry , Polyesters/chemistry , Spectrometry, X-Ray Emission , Tyrosine/chemistry , Water/chemistry , X-Ray Diffraction , Polycarboxylate Cement/metabolism , Polyesters/metabolism , Surface PropertiesABSTRACT
Drug release from polymeric nanoparticles (NPs) is governed by their adsorption onto cell membranes and transmigration across cell walls. These steps are influenced by their interactions with proteins near the cells. These interactions were investigated by studying the sequential adsorption of plasma proteins, albumin (Alb) and fibrinogen (Fg), and micellar NPs using quartz crystal microbalance with dissipation (QCMD), X-ray photoelectron spectroscopy (XPS), and small-angle X-ray scattering (SAXS). The three NPs in the study all have poly(ethylene glycol) (PEG) shells but different cores: amorphous poly(propylene oxide) (PPO), crystalline polycaprolactone (PCL), and poly(desaminotyrosyl-tyrosine octyl ester-co-suberic acid) (DTO-SA). None of the NPs adsorbed onto a pre-adsorbed Fg layer. On the other hand, when the deposition sequence was reversed, Fg was adsorbed onto DTO-SA NP and PCL NP surfaces, but not onto the PPO NP surface. The interactions with Alb were different: DTO-SA did not adsorb onto Alb and vice versa; PPO NP adsorbed onto an Alb layer, but Alb did not adsorb onto the PPO NP layer; and PCL NP reversibly adsorbed onto Alb, but Alb displaced pre-adsorbed PCL NP. Thus, in most instances, the adsorption behavior was asymmetric in that it was dependent on the order of arrival of the adsorbates at the substrate. SAXS data did not show evidence for complex formation in solution. Thus, the solution behavior appears not to be a predictor of the interaction of proteins and the NPs near surfaces. Differing strengths of pairwise interactions of proteins, NPs and substrates account for this adsorption behavior. These differences in interactions could be the results of deformation of the adsorbates immobilized at the surface and the different degrees of surface remodeling that occur upon adsorption. Deformation could lead to disassembly of the NPs that has implications on their ability to release their payload of drugs upon adsorption onto tissue surfaces.
Subject(s)
Nanoparticles , Proteins , Adsorption , Scattering, Small Angle , X-Ray Diffraction , Proteins/chemistry , Albumins , Nanoparticles/chemistry , Surface PropertiesABSTRACT
Polymer-protein hybrids can be deployed to improve protein solubility and stability in denaturing environments. While previous work used robotics and active machine learning to inform new designs, further biophysical information is required to ascertain structure-function behavior. Here, we show the value of tandem small-angle x-ray scattering (SAXS) and quartz crystal microbalance with dissipation (QCMD) experiments to reveal detailed polymer-protein interactions with horseradish peroxidase (HRP) as a test case. Of particular interest was the process of polymer-protein complex formation under thermal stress whereby SAXS monitors formation in solution while QCMD follows these dynamics at an interface. The radius of gyration (Rg ) of the protein as measured by SAXS does not change significantly in the presence of polymer under denaturing conditions, but thickness and dissipation changes were observed in QCMD data. SAXS data with and without thermal stress were utilized to create bead models of the potential complexes and denatured enzyme, and each model fit provided insight into the degree of interactions. Additionally, QCMD data demonstrated that HRP deforms by spreading upon surface adsorption at low concentration as shown by longer adsorption times and smaller frequency shifts. In contrast, thermally stressed and highly inactive HRP had faster adsorption kinetics. The combination of SAXS and QCMD serves as a framework for biophysical characterization of interactions between proteins and polymers which could be useful in designing polymer-protein hybrids.
Subject(s)
Polymers , Quartz Crystal Microbalance Techniques , Scattering, Small Angle , X-Rays , X-Ray Diffraction , Proteins/chemistry , Horseradish Peroxidase , Quartz/chemistryABSTRACT
Injuries to the nervous system present formidable challenges to scientists, clinicians, and patients. While regeneration within the central nervous system is minimal, peripheral nerves can regenerate, albeit with limitations. The regenerative mechanisms of the peripheral nervous system thus provide fertile ground for clinical and scientific advancement, and opportunities to learn fundamental lessons regarding nerve behavior in the context of regeneration, particularly the relationship of axons to their support cells and the extracellular matrix environment. However, few current interventions adequately address peripheral nerve injuries. This article aims to elucidate areas in which progress might be made toward developing better interventions, particularly using synthetic nerve grafts. The article first provides a thorough review of peripheral nerve anatomy, physiology, and the regenerative mechanisms that occur in response to injury. This is followed by a discussion of currently available interventions for peripheral nerve injuries. Promising biomaterial fabrication techniques which aim to recapitulate nerve architecture, along with approaches to enhancing these biomaterial scaffolds with growth factors and cellular components, are then described. The final section elucidates specific considerations when developing nerve grafts, including utilizing induced pluripotent stem cells, Schwann cells, nerve growth factors, and multilayered structures that mimic the architectures of the natural nerve.
ABSTRACT
Polymer-protein hybrids are intriguing materials that can bolster protein stability in non-native environments, thereby enhancing their utility in diverse medicinal, commercial, and industrial applications. One stabilization strategy involves designing synthetic random copolymers with compositions attuned to the protein surface, but rational design is complicated by the vast chemical and composition space. Here, a strategy is reported to design protein-stabilizing copolymers based on active machine learning, facilitated by automated material synthesis and characterization platforms. The versatility and robustness of the approach is demonstrated by the successful identification of copolymers that preserve, or even enhance, the activity of three chemically distinct enzymes following exposure to thermal denaturing conditions. Although systematic screening results in mixed success, active learning appropriately identifies unique and effective copolymer chemistries for the stabilization of each enzyme. Overall, this work broadens the capabilities to design fit-for-purpose synthetic copolymers that promote or otherwise manipulate protein activity, with extensions toward the design of robust polymer-protein hybrid materials.