A Simple Procedure of Fascia-Fat Grafting and Blepharoplasty as a Single-Stage Procedure for the Correction of Sunken Eyelids in Vietnamese Population.

PURPOSES: Upper sunken eyelids, which are characterized by the hollowness of the upper eyelids, often cause a poor aesthetic appearance. Herein, we present a simplified technique using fascia-fat grafts for volume augmentation combined with blepharoplasty as a single-stage procedure. METHODS: From January 2021 to December 2021, 30 patients with sunken eyelids visiting our clinic for hollow eyelid treatment underwent a fascia-fat grafting derived from the inguinal crease combined with simultaneous eyelid reconstruction. A modified classification of sunken eyelids that was more suitable for the Asian population was proposed. RESULTS: Postoperatively, edema and ptosis were transient and addressed thanks to proper massage and compresses. Two cases had scar fibers leading to a slight tension of upper eyelids at 6-month follow-up. This event was addressed by triamcinolone acetonide injections at 4-6-week intervals with satisfactory results. The orbital volume of all patients was satisfying and stable up to 12 months after the surgery. The satisfaction rate was 100% and 88.8% in group 1 and group 2, respectively, at 12-month follow-up. CONCLUSIONS: Fascia-fat grafting combined with blepharoplasty as a single-stage procedure was a simplified method that did not require varied types of surgical tools but brought satisfactory results. This method facilitated the routine procedure and eased surgeons in the clinical practices.

Decentralised, small-scale coagulation-membrane treatment of wastewater from metal recycling villages - a case study from Vietnam.

Effective treatment of wastewaters laden with heavy metals is critical to the sustainable social and economic growth of metal recycling villages in Vietnam. Currently, most wastewaters from metal recycling villages in Vietnam are directly discharged, posing great threats to the environment and human health. In this study, a small-scale combined coagulation-membrane filtration treatment of wastewater collected from a metal recycling village in Vietnam was experimentally investigated. The experimental results manifested the technical viability of the combined coagulation-membrane filtration process for the treatment of the heavily polluted metal recycling wastewater for beneficial reuse. In this combined treatment process, coagulation using ferric chloride (FeCl2) served as a pre-treatment prior to the microfiltration (MF)/reverse osmosis (RO) process. Under the optimised conditions, coagulation at the dosage of 0.2 g FeCl2 per 1,000 ml wastewater removed more than 90% of heavy metals (i.e. most notably including aluminium and chromium) from the wastewater, reducing the aluminium and chromium concentrations in the wastewater from 548.0 to 52.3 mg/L to 32.6 and 1.7 mg/L, respectively. The MF treatment of the wastewater following the coagulation further removed suspended solids and organic matters, rendering the wastewater safe for the subsequent RO filtration with respect to membrane fouling. Given the efficient pre-treatment of coagulation and MF, the RO process at the controlled water recovery of 50% was able to effectively treat the wastewater to potable water.

Zinc oxide and indium-gallium-zinc-oxide bi-layer synaptic device with highly linear long-term potentiation and depression characteristics.

The electrical properties, resistive switching behavior, and long-term potentiation/depression (LTP/LTD) in a single indium-gallium-zinc-oxide (IGZO) and bi-layer IGZO/ZnO (ZnO: zinc oxide) memristors were investigated for synapse application. The use of the oxide bi-layer memristors, in particular, improved electrical properties such as stability, memristor reliability, and an increase in synaptic weight states. The set voltage of bi-layer IGZO/ZnO memristors was 0.9 V, and the reset voltage was around - 0.7 V, resulting in a low-operating voltage for neuromorphic systems. The oxygen vacancies in the X-ray photoelectron spectroscopy analysis played a role in the modulation of the high-resistance state (HRS) (oxygen-deficient) and the low-resistance state (oxygen-rich) region. The VRESET of the bi-layer IGZO/ZnO memristors was lower than that of a single IGZO, which implied that oxygen-vacancy filaments could be easily ruptured due to the higher oxygen vacancy peak HRS layer. The nonlinearity of the LTP and LTD characteristics in a bi-layer IGZO/ZnO memristor was 6.77% and 11.49%, respectively, compared to those of 20.03% and 51.1% in a single IGZO memristor, respectively. Therefore, the extra ZnO layer in the bi-layer memristor with IGZO was potentially significant and essential to achieve a small set voltage and a reset voltage, and the switching behavior to form the conductive path.