A current review of U.S. beef flavor II: Managing beef flavor.

Beef flavor continues to be one of the largest drivers of beef demand and a differentiation point of beef from other competing proteins. Tenderness has long been identified as the most important palatability trait for consumer satisfaction. However, as technological advancements and industry practices evolve and improve in response to tenderness management, flavor has emerged as a key driver of consumer satisfaction. In response, the beef industry has recently invested in research focused on beef flavor development, measurement, and management to better understand the factors impacting flavor and help beef maintain this advantage. The current review paper is the second of two such papers focused on summarizing the present knowledge and identifying knowledge gaps. While the other review focuses on current practices related to beef flavor measurement, this review will cover research findings related to beef flavor management. Numerous production and product management factors influence beef flavor. Pre-harvest factors including marbling level, animal genetics/cattle type, diet, and animal age, can influence beef flavor. Moreover, numerous post-harvest product management factors, including product type, aging length and conditions, cookery methods, product enhancement, muscle-specific factors, packaging, retail display factors, and antimicrobial interventions, have all been evaluated for their impact on beef flavor characteristics. Results from numerous studies evaluating many of these factors will be outlined within this review in order to present management and production chain factors that can influence beef flavor.

A current review of U.S. beef flavor I: Measuring beef flavor.

Historically, consumer acceptance of beef was determined by tenderness. Developments in genetics and management over the last couple of decades have improved tenderness to the point that it is secondary to other factors in beef's taste. Flavor, however, is an extraordinarily complex taste attribute dependent on biological sensors in the mouth, sinus cavity, and jaws. The culinary industry has recently focused on innovative ways to give consumers new products satisfying their curiosity about different foods, especially proteins. Competition from plant-based, cell-based, and even other animal-based proteins provides diversity in consumers' ability to select a protein that satisfies their desire to include unique products in their diet. Consequently, the beef industry has focused on flavor for the last 10 to 15 years to determine whether it can provide the guardrails for beef consumption in the future. The U.S. beef industry formed a Flavor Working Group in 2012 composed of the authors listed here to investigate new and innovative ways to manage and measure beef flavor. The results of this working group have resulted in dozens of papers, presentations, abstracts, and symposia. The objective of this manuscript is to summarize the research developed by this working group and by others worldwide that have investigated methodologies that measure beef flavor. This paper will describe the strengths of the research in beef flavor measurement and point out future needs that might be identified as technology advances.

Effect of accelerated aging on shelf-stability, product loss, sensory and biochemical characteristics in 2 lower quality beef cuts.

The aim of this study was to determine the impact of accelerated aging (AA) on shelf stability, product loss, sensory and biochemical characteristics of 2 lower quality beef cuts. Triceps brachii (TB) and semimembranosus (SM) were collected and fabricated from 10 USDA Choice beef carcasses and assigned to 1 of 6 treatments: 3 d cooler aged (control), 21 d cooler aged, AA 49 °C for 2 h, AA 49 °C for 3 h, AA 54 °C for 2 h, and AA 54 °C for 3 h. The results showed that AA can decrease APC counts on steak surface and in purge and redness, but increase lightness and product loss of the steaks (P < 0.01). Lower shear force was also found for AA steaks compared to those from the control (P < 0.01), with the AA 54 °C treatments being comparable to 21 d cooler aging. However, the trained sensory panel determined AA steaks were less juicy and flavorful than those from the control and 21 d cooler aged samples (P < 0.05). There was no off-flavor detected in AA steaks though lipid oxidation was higher in AA samples than those in the control steaks (P < 0.01). The AA treatments stimulated cathepsin activity (P < 0.05), which may have enhanced the solubilization of stromal proteins and led to a different troponin-T degradation pattern compared to those from the 21 d aged samples (P < 0.01). Although AA is an economical and time-efficient method to increase tenderness of lower-quality beef cuts, further research is needed to determine strategies to mitigate the decrease in juiciness from AA treatments.

Skeletal Muscle Metabolism Is Dynamic during Porcine Postnatal Growth.

Skeletal muscle metabolism has implications for swine feed efficiency (FE); however, it remains unclear if the metabolic profile of skeletal muscle changes during postnatal growth. To assess the metabolic changes, samples were collected from the longissimus dorsi (LD, glycolytic muscle), latissimus dorsi (LAT, mixed muscle), and masseter (MS, oxidative muscle) at 20, 53, 87, 120, and 180 days of age from barrows. Muscles were assessed to determine the abundance of several metabolic enzymes. Lactate dehydrogenase (LDHα) decreased in all muscles from 20 to 87 d (p < 0.01), which may be attributed to the muscles being more glycolytic at weaning from a milk-based diet. Pyruvate carboxylase (PC) increased in all muscles at 53 d compared to the other time points (p < 0.01), while pyruvate dehydrogenase α 1 (PDHα1) increased at 87 and 180 d in MS compared to LD (p < 0.05), indicating that potential changes occur in pyruvate entry into the tricarboxylic acid (TCA) cycle during growth. Isolated mitochondria from each muscle were incubated with 13C-labeled metabolites to assess isotopomer enrichment patterns of TCA intermediates. Citrate M + 2 and M + 4 derived from [13C3]-pyruvate increased at 87 d in LAT and MS mitochondria compared to LD mitochondria (p < 0.05). Regardless of the muscle, citrate M+3 increased at 87 d compared to 20, 53, and 120 d, while 180 d showed intermediate values (p < 0.01). These data support the notion that pyruvate metabolism is dynamic during growth. Our findings establish a metabolic fingerprint associated with postnatal muscle hypertrophy.

Effect of traditional roughage-based or limit-fed, high-energy diets on growth performance and digestion in newly received growing cattle and subsequent implications on feedlot growth performance and carcass characteristics.

The objective was to determine the effects of ad libitum-fed roughage-based diets or limit-fed high-energy diets on growth performance, behavior, health, and digestion in newly received growing cattle and subsequent implications on feedlot growth performance and carcass characteristics. In experiment 1, 409 crossbred heifers (initial body weight [BW] = 279 ±â€…24 kg) in 32 pens were used in a randomized block design. Heifers were fed one of two dietary treatments: a total mixed ration with 0.99 Mcal net energy for gain (NEg)/kg dry matter (DM) fed ad libitum (0.99AL) or 1.32 Mcal NEg/kg DM limit-fed at 85% of intake of heifers fed 0.99AL (1.32LF85%). Both diets contained 40% DM as a branded wet corn gluten feed. In experiment 2, 370 crossbred heifers (initial BW = 225 ±â€…20 kg) were used in a randomized block design and were fed a diet formulated to contain 0.99 Mcal of NEg/kg DM for ad libitum intake or a diet formulated to contain 1.32 Mcal of NEg/kg DM and fed at 2.2% of BW daily (DM basis; 1.32LF2.2). For experiments 1 and 2, treatment integrity was maintained through the finishing phase where cattle were fed a common diet. Cattle were sorted by BW into heavy and light groups prior to finishing, with light cattle fed longer than heavy cattle to reach similar harvest BW. In experiment 3, eight ruminally cannulated heifers (average BW = 305 ±â€…23 kg) were used in a 2-period cross-over design and fed treatments from experiment 1 to assess digestibility and ruminal fermentation characteristics. Gain:feed was 47% and 35% greater (P < 0.01) in experiments 1 and 2, respectively, for limit-fed heifers compared with 0.99AL heifers. Rumination time was greater (P < 0.01) for 0.99AL compared with limit-fed treatments in experiments 1 and 2. Activity was greater (P < 0.01) for 1.32LF2.2 than for 0.99AL in experiment 2. In experiment 1, more (P = 0.03) carcasses from light-sort heifers than carcasses from heavy-sort heifers had livers with large, active abscesses. In experiment 2, finishing phase morbidity was greater (P < 0.01) for 1.32LF2.2 than for 0.99AL. Light-sort groups had fewer (P < 0.01) edible livers than heavy-sort groups, suggesting that greater number of days on feed may increase the risk of liver abscess prevalence and condemnation. In experiment 3, apparent total-tract DM and organic matter digestibilities were greater (P < 0.01) for 1.32LF85% than for 0.99AL. Overall, dietary treatments during the growing phase had little carryover effect on feedlot growth performance, carcass characteristics, or liver abscesses prevalence at harvest.

Ability of Nicotinamide Riboside to Prevent Muscle Fatigue of Barrows Subjected to a Performance Test.

The objective of this study was to determine the daily dietary nicotinamide riboside (NR) dose required to maximize the delay of subjective muscle fatigue onset. Barrows (N = 100) were assigned to one of five treatments: a conventional swine finishing diet containing 0 (CON), 15 (15NR), 30 (30NR), 45 (45NR) mg·kg body weight-1·d-1 NR, or CON supplemented with 45 mg·kg body weight-1·d-1 NR by drench or cookie dough (DRE). All treatments were administered for the final 11 days of feeding. On supplementation d 10, barrows individually experienced a performance test at 1.09 m/s until they were subjectively exhausted. Wireless electromyography (EMG) sensors were affixed to the biceps femoris (BF), tensor fascia latae (TFL), and semitendinosus (ST) to measure real-time muscle activity. There were no treatment effects for barrow speed (p = 0.57), a tendency for a treatment effect (p = 0.07) for distance, and a treatment effect (p = 0.04) on time to exhaustion. Barrows of the 15NR and DRE treatments had greater (p = 0.05) distances to exhaustion than CON barrows but did not differ from other NR barrows (p > 0.11). Barrows in the 45NR treatment did not differ (p = 0.11) in distance from 30NR barrows but tended to have a greater (p = 0.07) distance compared to CON barrows. All other treatment comparisons did not differ (p > 0.27). Barrows in the DRE treatment moved for longer (p < 0.01) than CON barrows, but all other treatments did not differ from each other (p > 0.15). There was no treatment × period interaction for all muscles' root mean square (RMS) values (p > 0.16), but there were Period effects for all muscles (p < 0.01) and a Treatment effect (p = 0.04) in the TFL. For all muscles, period 4 had greater RMS values than all other periods (p < 0.01), who did not differ from each other (p > 0.29). In the TFL, CON barrows had greater RMS values during the performance test compared to all NR treatments (p < 0.02), who did not differ from each other (p > 0.18). Overall, NR demonstrates potential in being a useful tool in fatigue prevention, but efficient administration of the compound needs further investigation.

National Beef Quality Audit-2022: in-plant assessments of quality and yield determining carcass characteristics of fed steers and heifers.

The National Beef Quality Audit - 2022 serves as a benchmark of the current fed steer and heifer population of the U.S. beef industry and allows comparison to previous audits as a method of monitoring industry progress. In-plant cooler assessments and collections of beef carcass data took place from July 2021 to November 2022. During in-plant evaluations, 10% of 1-d production was surveyed for quality and yield indicating characteristics of fed beef carcasses (n = 9,746 beef carcasses). Distributions of sex classes among sampled carcasses were steer (65.0%) and heifer (35.0%), whereas distributions of breed type were native (87.7%), dairy (11.3%), and Bos indicus (0.9%). Mean values were observed for USDA Yield Grades (YG; 3.3), USDA Quality Grade (QG; Choice16), marbling score (Small98), ribeye area (91.0 cm2), adjusted fat thickness (1.49 cm), hot carcass weight (401.9 kg), and KPH (2.5%). Mean overall maturity was A66, with a mean lean maturity of A56 and mean skeletal maturity of A72. There were 28.1% of carcasses identified for use in a USDA-certified beef G-Schedule Program. Defects, such as dark cutting and blood splash, were observed at 1.8% and 0.5%, respectively. Distributions of USDA YG were YG 1 (8.2%), YG 2 (30.7%), YG 3 (40.2%), YG 4 (16.6%), and YG 5 (4.3%). USDA QGs were observed at 7.5% Prime, 69.2% Choice, 16.4% Select, and 6.8% other. The results of this study provide an updated look at the current grading trends of beef carcasses in the United States to drive progress in the fed beef industry.

National Beef Quality Audit-2022: Transportation, mobility, live cattle, and hide assessments to determine producer-related defects that affect animal welfare and the value of market cows and bulls at processing facilities.

The National Beef Quality Audit (NBQA)-2022 serves as a benchmark of the current market cow and bull sectors of the U.S. beef industry and allows comparison to previous audits as a method of monitoring industry progress. From September 2021 through May 2022, livestock trailers (n = 125), live animals (n = 5,430), and post-slaughter hide-on animals (n = 6,674) were surveyed at 20 commercial beef processing facilities across the U.S. Cattle were transported in a variety of trailer types for an average distance of 490.6 km and a mean transport time of 6.3 h. During transit, cattle averaged 2.3 m2 of trailer space per animal indicating sufficient space was provided according to industry guidelines. Of all trailers surveyed, 55.3% transported cattle from an auction barn to a processing facility. When surveyed, 63.6% of all truck drivers reported to be Beef Quality Assurance certified. The majority (77.0%) of cattle were sound when evaluated for mobility. Mean body condition scores (9-point scale) for beef cows and bulls were 3.8 and 4.4, respectively, whereas mean body condition scores (5-point scale) for dairy cows and bulls were 2.3 and 2.6, respectively. Of the cattle surveyed, 45.1% had no visible live animal defects, and 37.9% had only a single defect. Of defects present in cows, 64.6% were attributed to an udder problem. Full udders were observed in 47.5% of all cows. Nearly all cattle were free of visible abscesses and knots (97.9% and 98.2%, respectively). No horns were observed in 89.4% of all cattle surveyed. Beef cattle were predominantly black-hided (68.9% and 67.4% of cows and bulls, respectively). Holstein was the predominant dairy animal observed and accounted for 85.7% of the cows and 98.0% of the bulls. Only 3.1% of all animals had no form of identification. Findings from the NBQA-2022 show improvements within the industry and identify areas that require continued education and research to improve market cow and bull welfare and beef quality.

A survey of Kansas beef producers and consumers who participate in business-to-consumer marketing of beef.

Following the coronavirus disease 2019 (COVID-19) pandemic, producer and consumer interest in business-to-consumer (B2C) beef sales increased. The objective of the current study was to assess current B2C beef producer and consumer attitudes and understandings of the B2C beef marketing process in order to identify knowledge gaps and strategies to improve producer/consumer interactions. Both producers and customers of local beef were recruited using a large online platform (https://shopkansasfarms.com), and descriptive statistics were used to summarize the data. In total, 41 B2C beef producers and 174 consumers who had either previously participated in B2C marketing or intended to participate were surveyed. Most producers (69.8%) only produced beef and produced only a small number (1 to 20 head) of animals per year. Many (43.9%) reported selling 100% of beef directly to consumers, while 29.3% reported selling less than 20% through this channel. Almost all (97.3%) of the producers indicated that increased sales directly to consumers would be desirable, with most (87.1%) considering this marketing channel as the most profitable. Marketing beef in smaller portions, including portioned cuts, was popular, reported by more than 62% of producers, while whole carcass sales were lower. Word-of-mouth (91.3%) and social media (65.8%) were the most popular forms of advertisement used by producers and more than one-third of producers (38.9%) reported having trouble with customers regarding a sale. Over 60% of consumers indicated they had purchased B2C beef less than 5 times, with more than 73% indicating that more than 75% of their beef purchased was local. Low take-home weights, portion sizes, and quality were among consumers' most cited troubles. Lack of freezer space (25%), price (24.9%), and quantity of product (41.7%) were reported as the largest barriers to consumer participation in B2C marketing. Both consumers and producers indicated that consumer testimonials would be the most beneficial in improving producer/consumer interactions, with educational materials from government sources viewed as the least beneficial. These results provide a baseline for B2C beef marketing and provide insight into impactful strategies to use to assist in this process.

Structural changes in collagen and aggrecan during extended aging may improve beef tenderness.

The aim of this study was to characterize structural and property modifications of intramuscular connective tissue (IMCT) during extended aging. Longissimus lumborum (LL), Gluteus medius (GM), and Gastrocnemius (GT) muscles were collected from 10 USDA choice carcasses, fabricated and assigned to one of four aging periods: 3, 21, 42, or 63 days (n = 120). As expected, tenderness improved, and IMCT texture weakened after 21 days of postmortem aging (dpm; P < 0.05). In addition, transition temperature of collagen decreased (P < 0.01) after 42 dpm. It is interesting to note the collagen structure was also altered where relative % of γ chain decreased after 42 dpm (P < 0.05), and the α1 chain % increased at 63 days (P < 0.01). Finally, The LL and GT had a decrease in the 75 kDa aggrecan fragments from 3 to 21 to 42 dpm (P < 0.05). This study provided evidence that IMCT weakens during postmortem aging due to the modifications of IMCT components such as collagen and proteoglycan.

Matrix metalloproteinase- 9 may contribute to collagen structure modification during postmortem aging of beef.

Matrix metalloproteinases (MMPs) are responsible for the turnover of intramuscular connective tissue in live animals. We hypothesize that MMPs may play a role in postmortem aging of beef muscles for the degradation of connective tissues. Four different experiments were performed to: 1) characterize MMP activity during postmortem aging of beef; 2) determine if the native beef MMP can contribute to connective tissue degradation in a simulated standard industry postmortem aging condition; 3) explore approaches to improve the native beef MMP activity and 4) characterize MMP activity in beef from cattle supplemented with supranutritional level of Zn. In experiment 1, MMP was active throughout the entire aging periods (3, 21, 42 and 63 d) for beef muscles Longissimus lumborum, Gluteus medius and Gastrocnemius, and the unknown MMP responsible for the collagen degradation was identified as MMP-9 by Western Blot. In experiment 2 and 3, MMP-9 activity was noticeable in the gels after 42 d of storage in the cooler. Moreover, the addition of ZnCl2 in the model system significantly increased MMP-9 activity when compared to the control (P < 0.01). In experiment 4, Longissimus thoracis from animals supplemented with a supranutritional Zn level had increased Zn availability and MMP-9 activity than those from animals fed with a control diet (P < 0.05). Further research is needed better understand MMP-9 mechanism during postmortem aging of meat. With a better understanding of MMP-9 in the aging process, the beef industry can provide better connective tissue management strategies for lower-quality beef cuts.

An Investigation of the Altered Textural Property in Woody Breast Myopathy Using an Integrative Omics Approach.

Woody breast (WB) is a myopathy observed in broiler Pectoralis major (PM) characterized by its tough and rubbery texture with greater level of calcium content. The objective of this study was to investigate the functionality/integrity of WB sarcoplasmic reticulum (SR), which may contribute to the elevated calcium content observed in WB and other factors that may influence WB texture. Fourteen Ross line broiler PM [7 severe WB and 7 normal (N)] were selected, packaged, and frozen at -20°C at 8 h postmortem from a commercial processing plant. Samples were used to measure pH, sarcomere length, proteolysis, calpain activity, collagenase activity, collagen content, collagen crosslinks density, and connective tissue peak transitional temperature. Exudate was also collected from each sample to evaluate free calcium concentration. The SR fraction of the samples was separated and utilized for proteomic and lipidomic analysis. The WB PM had a higher pH, shorter sarcomeres, lower % of intact troponin-T, more autolyzed µ/m calpain, more activated collagenase, greater collagen content, greater mature collagen crosslinks density, and higher connective tissue peak transitional temperature than the N PM (p ≤ 0.05). Exudate from WB PM had higher levels of free calcium than those from N PM (p < 0.05). Proteomics data revealed an upregulation of calcium transport proteins and a downregulation of proteins responsible for calcium release (p < 0.05) in WB SR. Interestingly, there was an upregulation of phospholipase A2 (PLA2), and cholinesterase exhibited a 7.6-fold increase in WB SR (p < 0.01). Lipidomics data revealed WB SR had less relative % of phosphatidylcholine (PC) and more lysophosphatidylcholine (LPC; p < 0.05). The results indicated that upregulation of calcium transport proteins and downregulation of calcium-release proteins in WB SR may be the muscle's attempt to regulate this proposed excessive signaling of calcium release due to multiple factors, such as upregulation of PLA2 resulting in PC hydrolysis and presence of cholinesterase inhibitors in the system prolonging action potential. In addition, the textural abnormality of WB may be the combined effects of shorter sarcomere length and more collagen with greater crosslink density being deposited in the broiler PM.

Evaluation of skin-on goat meat processing on processing efficiency, carcass yield, meat quality, and sensory attributes.

The objective of this study was to evaluate the properties of skin-on and skin-off goat processing and carcasses for processing efficiency, fabrication time, biochemical factors, and sensory attributes for stewed goat meat. Thirty-one goats were harvested in 2 separate experiments, either skin-on (n = 16) or off (n = 15). The carcasses were fabricated into four primals and each primal was cut into cubes. Processing efficiency, carcasses yield, collagen content, moisture, lipid, ultimate pH, and sensory attributes were measured, and multivariate regression analysis were conducted. The skin-on group had greater overall yield compared to the skin-off group (P < 0.01). Consumers rated goat shoulder meat with the highest overall liking compared to the other primals (P < 0.01), regardless of skin present (P > 0.10). Finally, lipid % was found to be the most essential palatability trait to American Asian consumers.

Differences in carcass chilling rate underlie differences in sensory traits of pork chops from pigs with heavier carcass weights.

Pork hot carcass weights (HCW) have been increasing 0.6 kg per year, and if they continue to increase at this rate, they are projected to reach an average weight of 118 kg by the year 2050. This projection in weight is a concern for pork packers and processors given the challenges in product quality from heavier carcasses of broiler chickens. However, previous work demonstrated that pork chops from heavier carcasses were more tender than those from lighter carcasses. Therefore, the objective was to determine the effects of pork hot carcass weights, ranging from 90 to 145 kg with an average of 119 kg, on slice shear force and sensory traits of Longissimus dorsi chops when cooked to 63 or 71 °C, and to assess if differences in chilling rate can explain differences in sensory traits. Carcasses were categorized retrospectively into fast, medium, or slow chilling-rates based on their chilling rate during the first 17 h postmortem. Loin chops cut from 95 boneless loins were cooked to either 63 or 71 °C and evaluated for slice shear force and trained sensory panel traits (tenderness, juiciness, and flavor) using two different research laboratories. Slopes of regression lines and coefficients of determination between HCW and sensory traits were calculated using the REG procedure in SAS and considered different from 0 at P ≤ 0.05. As hot carcass weight increased, chops became more tender as evidenced by a decrease in SSF (63 °C ß = -0.0412, P = 0.01; 71 °C ß = -0.1005, P < 0.001). Furthermore, HCW explained 25% (R2 = 0.2536) of the variation in chilling rate during the first 5 h of chilling and 32% (R2 = 0.3205) of the variation in chilling rate from 5 to 13 h postmortem. Slow- and medium-rate chilling carcasses were approximately 12 kg heavier (P < 0.05) than fast chilling carcasses. Slice shear force of chops cooked to 63 and 71 °C was reduced in slow and medium chilling compared with fast chilling carcasses. Carcass temperature at 5 h postmortem explained the greatest portion of variation (R2 = 0.071) in slice shear force of chops cooked to 63 °C. These results suggest that carcasses tend to chill slower as weight increases, which resulted in slight improvements in sensory traits of boneless pork chops regardless of final degree of doneness cooking temperature.

Pork carcass weights have increased year over year for at least the past 25 yr. The poultry industry has experienced similar increases in carcass weights in the recent past. The increases in broiler carcass weights have resulted in detrimental impacts on quality. Contrary to the poultry industry, increases in pork carcass weights have resulted in a general improvement in pork quality, including tenderness. The underlying cause of these improvements has not been explained. In the present study, chilling rate was associated with carcass weights, particularly during the first 5 h postmortem. In fact, carcass temperature measured in the Longissimus dorsi muscle at 5 h postmortem was the most predictive of instrumental tenderness values when boneless pork chops were cooked according to UDSA guidelines for whole-muscle pork products. The metabolic conversion of muscle to meat is most active during this initial chilling period. Therefore, chilling rate, which is associated with carcass weight, may be influencing the conversion of muscle to meat and provide some explanation as to why heavy carcasses result in more tender pork chops.

Validation of post-harvest antimicrobial interventions to control Shiga toxin-producing Escherichia coli (STEC) on market hog carcass surfaces.

Although swine are less associated with STEC foodborne disease outbreaks, the potential for swine to serve as a source of STEC infections in human beings cannot be disregarded. This study compared eight USDA-approved antimicrobial intervention technologies to quantify their ability to reduce STEC contamination on market hog carcasses. Hogs were harvested to provide skin-on carcass sides, and eight sides (per three replications) were inoculated with a 7-strain STEC cocktail (ca. 5 log CFU/cm2 across all external and body cavity surfaces). Each side was randomly assigned to a final pre-chill wash treatment administered in a commercial Chad carcass cabinet using a low-volume spray [3% lactic acid (lLA; 130 °F), 400 ppm peracetic acid (lPAA), or acidified 400 ppm peracetic acid (laPAA)] or a high-volume wash [ambient water (hAW), 400 ppm PAA (hPAA), 400 or 600 ppm hypobromous acid (hDBDMH), or 71 °C water (hHW)] treatment according to a randomized complete block study design. Post-treatment (after a 10-min hanging drip) and post-chilling (18 h at 2 °C) STEC reductions were compared for external skin-on surfaces and internal body cavity lean surface tissue. Post-treatment color changes were determined for lean, adipose, and skin carcass surfaces before and after chilling. When applied to the external, skin-on surface, the hHW, hPAA, and hDBDMH600 deluge washes were significantly (P ≤ 0.05) more effective than the other intervention technologies, achieving STEC reductions of 3.8, 3.4, and 3.2 log CFU/cm2, respectively. In comparison, the hAW control reduced STEC by 1.7-log CFU/cm2 on the external, skin-on surface. The carcass interventions were less effective at reducing STEC populations attached to interior body cavity (diaphragm region), with post-chill populations reduced by 0.9-2.2 log cycles, while the hAW control wash achieved a 0.6-log reduction. None of the treatments negatively impacted instrumental carcass color. While all market hog carcass interventions reduced STEC populations, larger reductions were observed when applied to the external, skin-on surface, with the largest reductions achieved by the hHW, hPAA, and hDBDMH600 deluge washes. These data equip pork processors with the information necessary to support decision-making when selecting an intervention technology.

Effects of extended postmortem aging and intramuscular location on protein degradation, muscle fiber morphometrics, and tenderness of beef longissimus lumborum and semitendinosus steaks.

The objective of this study was to determine effects of extended aging and intramuscular location on Warner-Bratzler shear force (WBSF), muscle fiber cross-sectional area (CSA), and protein degradation of semitendinosus (ST) and longissimus lumborum (LL) steaks. Left ST and LL were removed from 40 carcasses at 6 d postmortem. The ST was fabricated into five locations (LOC), with LOC 1 being most proximal and LOC 5 being most distal. The posterior LL was fabricated into 3 LOC, with LOC 1 being most anterior. Vacuum sealed ST steaks were aged 7, 14, 28, 56, or 112 d postmortem, while LL steaks were aged 7, 28, or 112 d postmortem at 2 ± 1 °C. A steak from each LOC was assigned to WBSF or laboratory analyses. There were no Day of Aging (DOA) × LOC interactions for all dependent variables (P > 0.06). There were DOA effects for ST and LL WBSF values and degraded 38-kDa desmin (DES; P < 0.01). Day-7 ST-steak WBSF value was greater than all other days (P < 0.01) and day-14 steaks had greater WBSF value than remaining days (P < 0.05). Day-28 ST-steak WBSF values were greater than day 56 and 112 (P < 0.01), which did not differ (P = 0.53). In the LL, day-7 steaks had greater WBSF values than the other two timepoints (P < 0.01) and day-28 steaks had greater (P < 0.01) WBSF values than day-112 steaks. Degraded ST 38-kDa DES content was less on day 7 and 14 compared to all other days (P < 0.03), but did not differ (P = 0.79) from each other. Days 28 and 56 38-kDa DES content was less than day 112 (P < 0.01), but did not differ (P = 0.34) from each other. Degraded LL 38-kDa DES content was less on day 7 than day 28 and 112 (P < 0.02), which did not differ (P = 0.67). There were LOC effects for only ST WBSF and muscle fiber CSA (P < 0.05). Semitendinosus steak LOC 1 and 2 had greater WBSF values than all other locations (P < 0.01), but did not differ (P = 0.32) from each other. Semitendinosus steak LOC 3 and 5 had greater WBSF values than LOC 4 (P < 0.01), but did not differ (P = 0.85) from each other. The CSA of all ST fiber types were largest in LOC 1 compared to all other fiber types (P < 0.01). The CSA of all LOC 2 and 3 fiber types was greater than LOC 4 and 5 (P < 0.01), but were not different from each other (P > 0.81), and LOC 4 had greater CSA than LOC 5 (P < 0.01). Steak aging WBSF value improvements seemed proteolysis catalyzed, while the ST intramuscular tenderness gradient was more likely due to muscle fiber CSA.

Effects of supplementing docosahexaenoic acid-rich microalgae and antioxidants on beef longissimus lumborum steak color stability and sensory characteristics.

The objective of this study was to determine the effects of four microalgae and antioxidant feeding regimens on beef longissimus lumborum color stability and palatability. Steers were blocked by weight and randomly assigned to one of four dietary treatments fed during a 45-d feeding period. Treatments (n = 10 per treatment) consisted of a control diet (CON) and control diet plus 100 g∙steer-1∙d-1 microalgae (ALGAE), ALGAE plus antioxidants (103 IU/d vitamin E and Sel-Plex) fed throughout feeding (AOX), and AOX fed for the final 10 d of finishing (LATE). The longissimus lumborum muscle was removed, aged for 14 d, and fabricated into steaks for objective and subjective color and palatability analyses. There were treatment × day of display interactions for a* value and steak surface metmyoglobin percentage (P < 0.01). There were no treatment differences through day 4 of display for a* value (P > 0.16) and day 5 of display for surface metmyoglobin (P > 0.10). By day 10 of display, ALGAE steaks had a smaller a* value than all other treatments (P < 0.01). Steaks from AOX steers had a greater (P < 0.01) a* value than CON steaks, whereas both a* values did not differ from LATE steaks (P > 0.19). By the end of display, ALGAE steaks had more metmyoglobin than the other treatments (P < 0.01). Steaks from AOX steers had less metmyoglobin than CON and LATE steaks (P < 0.04), which did not differ (P > 0.25). Treatment did not affect trained panel ratings (P > 0.15); however, treatment did affect (P < 0.01) off-flavor intensity. Steaks from ALGAE and AOX steers had greater off-flavor ratings than CON steaks (P < 0.03), but did not differ (P = 0.10). Steaks from LATE steers did not differ in off-flavor ratings from the other treatments (P > 0.07). Use of antioxidants improved color stability of steaks from microalgae fed steers; however, panelists still detected off-flavors.

The effects of the LIPEX finishing diet regimen on pork quality, fatty acid profile, palatability, and color stability.

The objective of this study was to determine the effects of the LIPEX finishing diet regimen on pork chop n-3 polyunsaturated fatty acid (PUFA) content and fresh meat quality. Twenty-eight finishing pigs (PIC 359 × F1 Hermitage/NGT; initial BW 81.5 ± 2.55 kg) were subjected to a 49-d feeding trial. Treatments consisted of a 2 × 2 factorial design with Sex (n = 14 barrows and gilts each) and Diet as main effects. Dietary treatments consisted of a 2-phase standard finishing diet regimen or a 2-phase LIPEX finishing diet regimen (EXL Milling, Lloydminster, SK, Canada). The LIPEX diet regimen added the EXL LIPEX.FA369 additive during phase 1 and the EXL LIPEX.FA369 and XFE Omega-3 Finishing Touch during phase 2. Five-days postmortem, whole boneless pork loins were transported to the Kansas State University Meats Laboratory, aged 14 d, and halved immediately behind the spinalis dorsi. After blooming for 30 min, chops were evaluated for Japanese color score and National Pork Producers Council (NPPC) color and marbling scores. A 2.54-cm chop was taken immediately anterior to the loin cut and was used for fatty acid and proximate composition analyses. Four 2.54-cm chops were cut from the posterior portion of the loin and were utilized for a 7-d simulated retail display analyses, Warner-Bratzler shear force (WBSF), and trained sensory panel. There were no Sex × Diet interactions for all variables measured in the study (P > 0.10). The LIPEX finishing regimen increased chop C18:3n-3, C20:5, and C22:5, which decreased the n-6:n-3 ratio (P < 0.01). There were no Diet effects on pH, Japanese and NPPC color and marbling scores, and proximate composition (P > 0.23). Diet did not affect cook loss, WBSF, and trained sensory panel scores (P > 0.012). There were no 2- or 3-way interactions between Diet, Sex, and Day, or Diet and Sex main effects for L*a* values, surface oxy- and metmyoglobin percentages, or visual panel chop redness and surface discoloration scores (P > 0.14). Feeding the LIPEX finishing diet regimen increased chop n-3 PUFA content without negatively impacting fresh chop palatability or color stability.

Effects of quality grade and intramuscular location on beef semitendinosus muscle fiber characteristics, NADH content, and color stability.

The objective of this study was to determine the impact of quality grade and steak location on color stability of semitendinosus (ST) steaks during a 9-d refrigerated study. Twenty-one ST muscles (12 Choice and 9 Select) were purchased from a commercial beef packing plant and fabricated into twelve 2.54-cm thick steaks per muscle. Steaks 1, 6, and 12 were designated for immunohistochemistry while remaining steak locations of proximal (steaks 2 to 4), middle (5 to 8), and distal (9 to 11) were randomly assigned to 0, 4, or 9 d of simulated retail display. Surface color attributes of day-9 steaks were recorded daily by a visual color panel and spectrophotometer. On days 0, 4, and 9 of display, steaks were analyzed for metmyoglobin reducing ability (MRA) and oxygen consumption (OC). Grade × day of display (DOD) interactions were detected for L*, a*, surface oxymyoglobin (OMb) and metmyoglobin (MMb) percentages, and visual panel surface redness and discoloration scores (P ≤ 0.02); however, no Grade × DOD interactions were observed for MRA or OC (P > 0.17). There were location main effect (LOC) × DOD interactions for L*, a*, surface MMb, visual panel surface redness and discoloration, and MRA (P ≤ 0.02). Distal steaks had lower L* values compared with the other locations (P < 0.01), which coincided with steaks being rated visually darker red (P < 0.01). Proximal steaks had greater a* values and had less surface discoloration than middle steaks (P < 0.05), which had an increased percentage of surface MMb (P ≤ 0.04). Distal and proximal steaks had increased MRA compared with middle steaks on days 0 and 4 (P < 0.05), and distal steaks had greater OC than the other locations throughout display (P < 0.01). There were fewer type I fibers at the proximal end with a greater percentage located at the middle and distal ends, and an increased percentage of type IIX fibers at the middle and proximal locations (P ≤ 0.01). Less type IIA fibers were detected at the middle LOC compared with the other two locations (P < 0.10). Larger type I, IIA, and IIX fibers were located at the proximal and middle locations compared with the distal LOC (P < 0.01). ST color and color-stability characteristics were influenced by DOD and LOC, which may partially be explained by differences in fiber types among locations.

Effects of space allowance and marketing strategy on growth performance of pigs raised to 165 kg.

A total of 976 pigs (PIC 327 × Camborough; PIC, Hendersonville, TN; initially 22.0 ± 1.53 kg body weight [BW]) were used in a 160-d growth study to evaluate the effects of increasing space allowance and varying marketing strategies on growth performance of pigs raised to market weights of ~165 kg. Pens of pigs were blocked by location within the barn and allotted to one of six treatments. Pen served as the experimental unit, and there were eight replicate pens per treatment. The first four treatments consisted of increased initial stocking density and did not utilize topping strategies: (1) 14 pigs/pen (1.17 m2/pig), (2) 17 pigs/pen (0.97 m2/pig), (3) 20 pigs/pen (0.82 m2/pig), and (4) 23 pigs/pen (0.71 m2/pig). The fifth treatment began with 25 pigs/pen (0.66 m2/pig) and had four marketing events with the heaviest 3 pigs/pen removed on day 93, and additional pigs removed to a common inventory of 20 pigs/pen on day 122 and 17 pigs/pen on day 147 with final marketing on day 160. The final treatment began the experiment with 23 pigs/pen (0.71 m2/pig) with three marketing events to achieve a common inventory of 20 pigs/pen on day 108 and 17 pigs/pen on day 147. Pens of pigs were weighed and feed disappearance measured on days 0, 55, 93, 108, 122, 135, 147, and 160. As space allowance decreased from 1.17 to 0.71 m2/pig via increased initial pen inventory (treatments 1 to 4), overall average daily gain (ADG) and average daily feed intake (ADFI) decreased (linear, P < 0.001), while gain:feed ratio (G:F) did not differ (P > 0.05). The treatments with multiple marketing events were compared with each other and with the treatment that began with 0.71 m2/pig and only marketed once at the end of the study. Overall ADG and ADFI were not different (P > 0.05) among these three treatments. Marketing pigs three or four times improved (P < 0.05) G:F compared with the treatment that began the study with 0.71 m2/pig and marketed only once. Reducing floor space allowance for heavy weight pigs decreased intake, which resulted in lower growth rate and final BW, with these reductions occurring before the critical k-value was reached. Total weight gain per pen was maximized with the lowest space allowance and the multiple marketing treatments. Thus, strategic use of pig removals prior to final marketing may allow producers to maximize both number of pigs and total weight marketed through a barn when feeding to heavy weights.