Collaborative online international learning in physiology: a case study.

Internationalization in higher education is essential, and although active learning methodologies are increasing and allow students to develop transversal skills, most still have a very local scope. In this context, the Collaborative Online International Learning (COIL) methodology is an interesting approach to benefit the students' development. It consists of an online program that involves creating multicultural teams to develop a specific learning project. Although this methodology is expanding, its use in physiology is still scarce. This paper aims to show an example of applying COIL methodology in physiology topics to enhance higher-education students' innovation and business skills. Our example project developed a sports-assessment service concept focused on physiology and biomechanics assessments. The program involved teams from Brazil, Germany, and Spain, comprising undergraduate and master students. Over 7 weeks, these teams, mentored by professors and researchers, engaged in workshops covering COIL methodology, business model design, executive summary planning, economic analyses, and communication techniques. Key outcomes included learning new concepts, developing soft skills, building confidence in innovative solution proposals, and experiencing diverse cultures. Challenges faced were language barriers, scheduling, task complexity, and logistical issues. This experience confirms the effectiveness of incorporating programs using COIL methodology into educational curriculums. Doing so exposes physiology students to innovation, entrepreneurship, and business creation while strengthening their professional connections and opening up postgraduation opportunities.NEW & NOTEWORTHY Although the Collaborative Online International Learning (COIL) methodology is expanding, its use in physiology is still scarce. Our example COIL project of 7 weeks developed a sports-assessment service concept focused on physiology and biomechanics assessments. The program involved teams from Brazil, Germany, and Spain, comprising undergraduate and master's students. Students perceived extracurricular activities in this format as beneficial. Coaches also expressed positive views about such initiatives, noting benefits for students and their development.

The effect of saddle setback and cycling intensity on saddle pressures and comfort in male and female recreational cyclists.

Cycling is a recreational activity that helps to prevent different diseases. The practice of this popular worldwide sport requires the cyclist to maintain a particular posture in contact with the pedals, handlebars, and saddle for long periods of time. Therefore, the study of the pressure exerted on the saddle is of great importance as it is directly related to the reduction of perineal injuries and pathologies. The present research aims to study the effect on comfort and saddle pressures when performing a cycloergometer test using 3 saddle positions: own setback position (P1), forward [-10% (P2)], backward [+10% (P3)] at two exercise intensities (Ventilatory Threshold: VT1 and VT2). 34 amateur cyclists (14 women, 20 men) were analysed. The results showed that comfort was significantly reduced in P3 (p < 0.01) and significantly increased for some items in the VT1 condition and for men in P1 regarding overall comfort (p < 0.01, ES = 0.105). In addition, the average and maximum pressure in the pubic region were significantly higher at P3 (p < 0.001) and men show higher values for average pressure compared to women (p = 0.006, ES = 0.235). In conclusion, backward saddle setback positions increase pressure and discomfort to recreational cyclists in comparison with the forward and own setback position, which could increase the risk of injury.

Curved non-motorized treadmills do not biomechanically replicate overground running better than motorized treadmills.

The purpose of this study was to determine if curved non-motorized treadmills can reproduce overground running better than motorized treadmills by analysing the differences in joint kinematics (hip, knee, and ankle) using SPM. Nineteen recreational runners completed three randomized running tests on these surfaces. Kinematic data from the hip, knee, and ankle joints were collected. Two-tailed SPM t-tests were performed to analyse time-continuous gait cycles in three anatomical planes of each joint. Higher within-subject variability was observed in the frontal and transverse planes during curved non-motorized treadmill running. SPM analysis showed more significant differences (p < 0.05) between curved non-motorized treadmill and overground than between motorized treadmill and overground, mainly in knee (from 12% to 30% and 93% to 99% of the gait cycle) and ankle (from 19% to 23% of the gait cycle) in the sagittal plane. Therefore, running on curved non-motorized treadmills is more biomechanically different compared to overground than motorized treadmills, and might not be the best strategy to replicate overground running in terms of joint kinematics during highly controlled research studies. However, they could be an interesting tool in rehabilitation or training environments since the changes observed in joint kinematics were likely not functionally relevant.

Effect of Hamstring Tightness and Fatigue on Dynamic Stability and Agility in Physically Active Young Men.

Hamstring extensibility has been defined as a factor to diminished dynamic stability and therefore increased risk of injury. The purpose of this study was to analyse the effects of hamstring tightness and fatigue on dynamic stability and agility. Nineteen participants were divided between the normal extensibility group (NEG) (n = 9, 82.2° ± 12.4°) and hamstrings tightness group (HTG) (n = 10, 64° ± 4.9°) using the passive straight leg raise test. To analyse dynamic stability and agility, they performed the modified Star Excursion Balance Test (mSEBT) and Dynamic Postural Stability Index (DPSI), and hexagon agility test, respectively, before and after a fatigue protocol. A two-way repeated measures ANOVA was used to determine differences among conditions: NEG vs. HTG, and rested vs. fatigued. HTG showed a significantly lower reach in the anterior direction in the mSEBT in pre- and post-fatigue than NEG. Participants in the NEG showed poor stability after landing in the mediolateral direction on DPSI post-fatigue. No significant changes were found in agility related with the group nor fatigue state. Participants with hamstring extensibility reduction has no differences in dynamic stability after landing nor agility after fatigue test, but significantly affects reaching distances during one-leg balance. As a conclusion, a reduction in range of motion in HTG was observed, but no other effects were observed on performance and dynamic stability after a local fatigue protocol depending on hamstring extensibility.

Acute physiological responses to a pyramidal exercise protocol and the associations with skin temperature variation in different body areas.

This study aimed to examine the skin temperature (Tsk) variations in five regions of interest (ROI) to assess whether possible disparities between the ROI's Tsk could be associated with specific acute physiological responses during cycling. Seventeen participants performed a pyramidal load protocol on a cycling ergometer. We synchronously measured Tsk in five ROI with three infrared cameras. We assessed internal load, sweat rate, and core temperature. Reported perceived exertion and calves' Tsk showed the highest correlation (r = -0.588; p < 0.01). Mixed regression models revealed that the heart rate and reported perceived exertion were inversely related to calves' Tsk. The exercise duration was directly associated with the nose tip and calf Tsk but inversely related to the forehead and forearm Tsk. The sweat rate was directly related to forehead and forearm Tsk. The association of Tsk with thermoregulatory or exercise load parameters depends on the ROI. The parallel observation of the face and calf Tsk could indicate simultaneously the observation of acute thermoregulatory needs and individual internal load. The separate Tsk analyses of individual ROI appear more suitable to examine specific physiological response than a mean Tsk of several ROI during cycling.

Effects of Central and Peripheral Fatigue on Impact Characteristics during Running.

Fatigue and impact can represent an injury risk factor during running. The objective of this study was to compare the impact transmission along the locomotor system between the central and peripheral fatigued states during running. Tibial and head acceleration as well as shock attenuation in the time- and frequency-domain were analyzed during 2-min of treadmill running in the pre- and post-fatigue state in eighteen male popular runners (N = 18). The impact transmission was measured before and after a 30-min central fatigue protocol on the treadmill or a peripheral fatigue protocol in the quadricep and hamstring muscles using an isokinetic dynamometer. The time-domain acceleration variables were not modified either by peripheral or central fatigue (p > 0.05). Nevertheless, central fatigue increased the maximum (p = 0.006) and total (p = 0.007) signal power magnitude in the high-frequency range in the tibia, and the attenuation variable in the low- (p = 0.048) and high-frequency area (p = 0.000), while peripheral fatigue did not cause any modifications in the frequency-domain variables (p > 0.05). Furthermore, the attenuation in the low (p = 0.000)- and high-frequency area was higher with central fatigue than peripheral fatigue (p = 0.003). The results demonstrate that central fatigue increases the severity of impact during running as well as the attenuation of low and high components.

Higher Hamstrings Strength and Stability Are Related to Lower Kinematics Alteration during Running after Central and Peripheral Fatigue.

Fatigue can be classified as peripheral or central depending on the extent of its effects. Muscle strength reduction, associated with the appearance of fatigue during running, produces kinetics and kinematics modifications which could lead to an increased risk of injury. This study aimed to analyze the effect of peripheral and central fatigue protocols in running kinematics and to investigate the relationship between isokinetic strength and dynamic stability in fatigue related changes. Eighteen male recreational runners participated in the study. The dynamic postural stability index (DPSI) and quadriceps and hamstring isokinetic strength were assessed before the fatigue test. Then, angular kinematics during treadmill running were evaluated in pre- and post-fatigue states (central and peripheral). The results showed that runners with higher hamstring isokinetic strength and better DPSI had lower modifications after central fatigue of stance time, knee flexion, vertical and leg stiffness, and ankle dorsiflexion during the absorption and propulsion phases (r > 0.400, p < 0.05). Moreover, small changes in ankle dorsiflexion at initial contact after peripheral fatigue are related to a better DPSI and higher hamstring isokinetic strength (r > 0.400, p < 0.05). In summary, high values of hamstring isokinetic concentric strength and dynamic stability are related to lower increases of range of movements during running after central and peripheral fatigue. So, fatigue may affect to a lesser extent the running technique of those runners with higher hamstring strength and stability values.

Validity and Reliability of an Instrumented Treadmill with an Accelerometry System for Assessment of Spatio-Temporal Parameters and Impact Transmission.

Running retraining programs focused on concurrent feedback of acceleration impacts have been demonstrated to be a good strategy to reduce running-related injuries (RRI), as well as to improve running economy and reduce acceleration impacts and injury running incidence. Traditionally, impacts have been registered by mean of accelerometers attached directly to the athletes, which is inaccessible to the entire population, because it requires laboratory conditions. This study investigated the validity and reliability of a new device integrated directly into the treadmill, compared to a traditional acceleration impact system. Thirty healthy athletes with no history of RRI were tested on two separate days over the instrumented treadmill (AccTrea) and simultaneously with an acceleration impact system attached to the participant (AccAthl). AccTrea was demonstrated to be a valid and reliable tool for measuring spatio-temporal parameters like step length (validity intraclass correlation coefficient (ICC) = 0.94; reliability ICC = 0.92), step time (validity ICC = 0.95; reliability ICC = 0.96), and step frequency (validity ICC = 0.95; reliability ICC = 0.96) during running. Peak acceleration impact variables showed a high reliability for the left (reliability ICC = 0.88) and right leg (reliability ICC = 0.85), and peak impact asymmetry showed a modest validity (ICC = 0.55). These results indicated that the AccTrea system is a valid and reliable way to assess spatio-temporal variables, and a reliable tool for measuring acceleration impacts during running.

Influence of infrared camera model and evaluator reproducibility in the assessment of skin temperature responses to physical exercise.

Infrared thermography (IRT) has been gaining in popularity in clinical and scientific research due to the increasing availability of affordable infrared cameras. This study aims to determine the similarity of measurement performance between three models of IRT camera during assessment of skin temperature before and after physical exercise. Three models of FLIR thermographic cameras (E60bx, Flir-One Pro LT, and C2) were tested. Thermal images were taken of the foot sole, anterior leg, and anterior thigh from 12 well-trained men, before and after a 30-min run on a treadmill. Image files were blinded and processed by three evaluators to extract the mean, maximum, and standard deviation of skin temperature of the region of interest. Time for data processing and rate of perceived effort was also recorded. Data processing was slower on the E60bx (CI95% E60 vs C2 [0.2, 2.6 min], p = 0.02 and ES = 0.6); vs. Flir-One [0.0, 3.4 min], p = 0.03 and ES = 0.6) and was associated with lower effort perception (E60 3.0 ± 0.1 vs. Flir-One 5.6 ± 0.2 vs C2 7.0 ± 0.2 points; p < 0.001 and ES > 0.8). The C2 and Flir-One cameras underestimated the temperature compared with the E60. In general, measuring mean temperature provided higher camera and examiner intra-class correlations than maximum and standard deviation, especially before exercise. Moreover, post exercise mean skin temperatures provided the most consistent values across cameras and evaluators. We recommend the use of mean temperature and caution when using more than one camera model in a study.

Validation of ThermoHuman automatic thermographic software for assessing foot temperature before and after running.

The aim of the study was to evaluate an automatic thermographic software package (ThermoHuman®) for assessing skin temperature on the soles of the feet before and after running and to compare it with two manual definitions of the regions of interest (ROIs). 120 thermal images of the soles of the feet of 30 participants, at two measurement points (before and after running 30 min) and on two measurement days were analyzed. Three different models of thermographic image analyses were used to obtain the mean temperature of 9 ROIs: A) ThermoHuman (automatic definition of ROIs using ThermoHuman® software), B) Manual (manual delimitation of ROIs by proportion criteria), and C) Manual-TH (manual delimitation of ROIs in an attempt to replicate the regions analyzed by ThermoHuman). ThermoHuman resulted in an 86% reduction in time involved compared to manual delimitation. Fourteen of the 120 images (12%) presented some error in one or more of the ROI delimitations. Although the three procedures presented significant differences between them (53% in the comparison between ThermoHuman and Manual, 47% between ThermoHuman and Manual-TH, and 28% between Manual and Manual-TH), all differences had a small effect size (ES 0.2-0.4) or lower (ES < 0.2). Bland-Altman plots showed similar 95% limits of agreement between the three procedures before and after running. Intraclass correlation coefficient analysis of the three procedures presented excellent reliability (ICC>0.8). In conclusion, ThermoHuman® software was observed to be time-saving for image analysis with excellent reliability. Although results suggest that ThermoHuman® and manual methods are both valid in themselves, combining them is not recommended due to the differences observed between them.

Effect of prefabricated thermoformable foot orthoses on plantar surface temperature after running: A gender comparison.

There is a lack of evidence about the effect of different type of foot orthoses on plantar surface temperature. Moreover, that effect could be different depending on gender due to anatomical and physiological differences between men and women. The aim of the study was to analyze the effect of a prefabricated thermoformable foot orthosis on plantar surface temperature after running and taking gender differences into account. Thirty recreational runners (15 males, mean (standard deviation): 28 (7) years, 69.7 (6.5) kg, 1.74 (0.05) cm and 22.9 (1.7) kg/m2; and 15 females: 35 (7) years, 55.2 (6.9) kg, 1.63 (0.06) cm and 20.6 (1.9) kg/m2) carried out a maximum incremental test as pre-test, and two running tests on a treadmill at the laboratory wearing previously randomized different foot orthoses (thermoformable and prefabricated generic). The plantar surface temperature of the dominant foot sole in ten regions of interest was assessed before and immediately after 30-min running at 75% of VO2max. The use of thermoformable foot orthoses produced lower temperatures only in men after the run in medial heel (P = 0.033, ES = 0.7), which then disappeared in temperature variation (after - before) (P = 0.910). Regarding gender, women showed lower temperatures before the run in both orthosis conditions (P < 0.039, ES > 0.8), but no differences in temperatures after the run (P = 0.910) in comparison with men. Moreover, absolute temperatures after running were always greater than before the run (P < 0.001, ES > 5.0). In conclusion, the thermoformable foot orthoses do not modify plantar surface temperature after running in healthy runners of either gender, compared to prefabricated generic foot orthoses. Although women present lower baseline plantar temperatures than men, these differences disappear after exercise.

Acute effect of induced asymmetrical running technique on foot skin temperature.

The aim of the study was to evaluate skin temperature of the soles of the feet before and after a provoked asymmetrical running. Seventeen recreational male runners performed two 15 min running tests in the same session. In the first test, participants performed running without modifying their running technique (control condition). In the second running test, they repeated the same protocol using an ankle weight of 1.5 kg in the non-dominant ankle (asymmetrical condition). Rate of perceive exertion, heart rate and spatio-temporal parameters were measured during the running tests. Skin temperature was measured with an infrared camera before and after each condition. Generally, comparing both lower limbs, non-preferred limb (with the ankle weight) had lower contact time (p < 0.001 and ES > 0.8), higher stride length (p < 0.05 and ES > 0.3) and higher stride frequency in asymmetrical condition (p < 0.01 and ES > 0.4). However, no differences were observed on skin temperature between both feet in the two conditions in any of the regions of interest assessed (p > 0.05). Although the asymmetry generation model used provoked technical asymmetries in spatio-temporal parameters during running, no thermal asymmetries were observed between preferred and non-preferred sole of the foot. These results suggested the lower importance of mechanical than physiological mechanisms on skin temperature during running.

Relationship between foot eversion and thermographic foot skin temperature after running.

The main instruments to assess foot eversion have some limitations (especially for field applications), and therefore it is necessary to explore new methods. The objective was to determine the relationship between foot eversion and skin temperature asymmetry of the foot sole (difference between medial and lateral side), using infrared thermography. Twenty-two runners performed a running test lasting 30 min. Skin temperature of the feet soles was measured by infrared thermography before and after running. Foot eversion during running was measured by kinematic analysis. Immediately after running, weak negative correlations were observed between thermal symmetry of the rearfoot and eversion at contact time, and between thermal symmetry of the entire plantar surface of the foot and maximum eversion during stance phase (r=-0.3 and p=0.04 in both cases). Regarding temperature variations, weak correlations were also observed (r=0.4 and p<0.05). The weak correlations observed in this study suggest that skin temperature is not related to foot eversion. However, these results open interesting future lines of research.

The location of the tibial accelerometer does influence impact acceleration parameters during running.

Tibial accelerations have been associated with a number of running injuries. However, studies attaching the tibial accelerometer on the proximal section are as numerous as those attaching the accelerometer on the distal section. This study aimed to investigate whether accelerometer location influences acceleration parameters commonly reported in running literature. To fulfil this purpose, 30 athletes ran at 2.22, 2.78 and 3.33 m · s-1 with three accelerometers attached with double-sided tape and tightened to the participants' tolerance on the forehead, the proximal section of the tibia and the distal section of the tibia. Time-domain (peak acceleration, shock attenuation) and frequency-domain parameters (peak frequency, peak power, signal magnitude and shock attenuation in both the low and high frequency ranges) were calculated for each of the tibial locations. The distal accelerometer registered greater tibial acceleration peak and shock attenuation compared to the proximal accelerometer. With respect to the frequency-domain analysis, the distal accelerometer provided greater values of all the low-frequency parameters, whereas no difference was observed for the high-frequency parameters. These findings suggest that the location of the tibial accelerometer does influence the acceleration signal parameters, and thus, researchers should carefully consider the location they choose to place the accelerometer so that equivalent comparisons across studies can be made.

Effect of bike-fit in the perception of comfort, fatigue and pain.

The aim of this study was to assess the influence of different bike positions on the perception of fatigue, pain and comfort. Twenty cyclists underwent three tests that involved cycling for 45 min at their individual 50% peak aerobic power output while adopting different positions on the bike. Participants performed the cycling tests adopting three positions defined by two parameters (knee flexion angle [20°, 30°, 40°] and trunk flexion angle [35°, 45°, 55°]) in random order. Angles were measured using a 2D motion analysis system during cycling and applying Fonda's correction factor. Perceptions of comfort, fatigue and pain were reported before the end of each test. The combination of 40° knee flexion and 35° trunk flexion was perceived as the most uncomfortable position. Moreover, greater knee flexion had a negative effect on trunk comfort, accompanied by greater levels of fatigue and pain perception in the anterior part of the thigh and knee. In conclusion, cyclists perceived the most comfortable position to be when the saddle height was within the recommended knee angle (30° calculated from the offset position or 40 ± 4.0° of absolute value). Upright trunk was found to be the most comfortable position for recreational cyclists, where aerodynamics is not so important. Cyclists' bike perceptions should be taken into account when it comes to choosing the most beneficial position, since this can play a role in injury prevention and enhance cycling performance.

Relationship between skin temperature and muscle activation during incremental cycle exercise.

While different studies showed that better fitness level adds to the efficiency of the thermoregulatory system, the relationship between muscular effort and skin temperature is still unknown. Therefore, the present study assessed the relationship between neuromuscular activation and skin temperature during cycle exercise. Ten physically active participants performed an incremental workload cycling test to exhaustion while neuromuscular activations were recorded (via surface electromyography - EMG) from rectus femoris, vastus lateralis, biceps femoris and gastrocnemius medialis. Thermographic images were recorded before, immediately after and 10 min after finishing the cycling test, at four body regions of interest corresponding to the muscles where neuromuscular activations were monitored. Frequency band analysis was conducted to assess spectral properties of EMG signals in order to infer on priority in recruitment of motor units. Significant inverse relationship between changes in skin temperature and changes in overall neuromuscular activation for vastus lateralis was observed (r<-0.5 and p<0.04). Significant positive relationship was observed between skin temperature and low frequency components of neuromuscular activation from vastus lateralis (r>0.7 and p<0.01). Participants with larger overall activation and reduced low frequency component for vastus lateralis activation presented a better adaptive response of their thermoregulatory system by showing fewer changes in skin temperature after incremental cycling test.

Effect of custom-made and prefabricated insoles on plantar loading parameters during running with and without fatigue.

Controversy exists whether custom-made insoles are more effective in reducing plantar loading compared to prefabricated insoles. Forty recreational athletes ran using custom-made, prefabricated, and the original insoles of their running shoes, at rest and after a fatigue run. Contact time, stride rate, and plantar loading parameters were measured. Neither the insole conditions nor the fatigue state modified contact time and stride rate. Addressing prevention of running injuries, post-fatigue loading values are of great interest. Custom-made insoles reduced the post-fatigue loading under the hallux (92 vs. 130 kPa, P < 0.05), medial midfoot (70 vs. 105 kPa, P < 0.01), and lateral midfoot (62 vs 96 kPa, P < 0.01). Prefabricated insoles provoked reductions in post-fatigue loading under the toes (120 vs. 175 kPa, P < 0.05), medial midfoot (71 vs. 105 kPa, P < 0.01), and lateral midfoot (68 vs. 96 kPa, P < 0.01). Regarding both study insoles, custom-made insoles reduced by 31% and 54% plantar loading under the medial and lateral heel compared to the prefabricated insoles. Finally, fatigue state did not influence plantar loading regardless the insole condition. In long-distance races, even a slight reduction in plantar loading at each foot strike may suppose a significant decrease in the overall stress experienced by the foot, and therefore the use of insoles may be an important protective mechanism for plantar overloading.

Effects of treadmill running and fatigue on impact acceleration in distance running.

The effects of treadmill running on impact acceleration were examined together with the interaction between running surface and runner's fatigue state. Twenty recreational runners (11 men and 9 women) ran overground and on a treadmill (at 4.0 m/s) before and after a fatigue protocol consisting of a 30-minute run at 85% of individual maximal aerobic speed. Impact accelerations were analysed using two lightweight capacitive uniaxial accelerometers. A two-way repeated-measure analysis of variance showed that, in the pre-fatigue condition, the treadmill running decreased head and tibial peak impact accelerations and impact rates (the rate of change of acceleration), but no significant difference was observed between the two surfaces in shock attenuation. There was no significant difference in acceleration parameters between the two surfaces in the post-fatigue condition. There was a significant interaction between surface (treadmill and overground) and fatigue state (pre-fatigue and post-fatigue). In particular, fatigue when running overground decreased impact acceleration severity, but it had no such effect when running on the treadmill. The effects of treadmill running and the interaction need to be taken into account when interpreting the results of studies that use a treadmill in their experimental protocols, and when prescribing physical exercise.

Supination control increases performance in sideward cutting movements in tennis.

The objective of this study was to explore the effects of tennis shoe characteristics on performance during sideward cutting movements followed by direction changes. Five tennis players (age = 21.5 +/- 0.8 years, mass = 75.2 +/- 2.8 kg, and height = 1.78 +/- 0.05 m) participated in the study and 10 tennis shoes were tested. Several footwear mechanical parameters were analyzed: Shore A hardness, longitudinal and transverse flexibility, midsole height at heel, presence of heel counters, and weight. A force plate was used to measure the kinetic variables, and two video cameras were used to perform a three-dimensional photogrammetric analysis. Results revealed that subject-footwear interaction was statistically not significant (p > 0.05) for the kinetic and kinematic variables. Only contact time (p = 0.008) and supination movement (p = 0.009) were footwear dependent. Positive correlations between contact time and first supination peak (r = 0.783, p = 0.007) and second supination peak (r = 0.730, p = 0.016) were observed. Impulse was not changed, which means shoes limiting supination allowed tennis players to perform faster sideward cutting movements.