Characteristics of fine particles from incense burning at temple premises of Kathmandu Valley, Nepal.

The impact of incense burning on ambient air quality was investigated by measuring the concentrations of fine particles (PM2.5), elemental carbon (EC), organic carbon (OC), and their oxidative potential (OP) at three temple premises in Kathmandu Valley, Nepal. These temples, namely, Bajrabarahi, Bagalamukhi, and Bhadrakali, are located in three distinct environments: forest, residential, and roadside, respectively. During the incense burning event days, the PM2.5 concentration at Bhadrakali (431.4 µgm-3) was significantly higher than that measured at the Bagalamukhi (135.2 µgm-3) and Bajrabarahi (84.7 µgm-3) temple premises. This observation is consistent with the fact that Bhadrakali Temple had the highest intensity of incense burning. Additionally, the temple premises were also influenced by vehicular emissions from transportation facilities. Carbonaceous aerosols significantly increased during incense burning events, indicating that incense burning contributes significantly to the formation of primary and secondary OC. Moreover, the OP of PM2.5 during the incense burning event days was higher compared to non-event days (p < 0.05), suggesting an elevated health risk due to the increased concentration and toxicity of fine particles. These findings highlight the substantial impact of incense burning on air quality in temple premises, emphasizing the need to implement effective strategies to mitigate the associated health risks.

KISTI remote control room for CDF and Belle II collider experiments.

Particle collider experiments would be continued even when one is not present at the laboratory (on-site). To achieve this, we require an e-Science paradigm of studying particle physics anytime anywhere. One of the components for establishing this paradigm is a remote control room for data acquisition (DAQ). We developed and embedded a remote control room at the Korea Institute of Science and Technology Information (KISTI). Since then, we have been adopting on/offline shifts for conducting collider experiments at KISTI, that is, the experiments are done even when we are not on-site. In this paper, we introduce our experience of our remote control room for both CDF and Belle II experiments. This remote control room includes international networks, security, DAQ systems, data transfers, and monitoring systems. We also presented the results of the shifts done in the remote control room at KISTI.

Chromism-Integrated Sensors and Devices for Visual Indicators.

The bifunctionality of chromism-integrated sensors and devices has been highlighted because of their reversibility, fast response, and visual indication. For example, one of the representative chromism electrochromic materials exhibits optical modulation under ion insertion/extraction by applying a potential. This operation mechanism can be integrated with various sensors (pressure, strain, biomolecules, gas, etc.) and devices (energy conversion/storage systems) as visual indicators for user-friendly operation. In this review, recent advances in the field of chromism-integrated systems for visual indicators are categorized for various chromism-integrated sensors and devices. This review can provide insights for researchers working on chromism, sensors, or devices. The integrated chromic devices are evaluated in terms of coloration-bleach operation, cycling stability, and coloration efficiency. In addition, the existing challenges and prospects for chromism-integrated sensors and devices are summarized for further research.

Synthesis of vertically aligned wafer-scale tantalum disulfide using high-Ar/H2S ratio plasma.

Nanostructural modification of two-dimensional (2D) materials has attracted significant attention for enhancing hydrogen evolution reaction (HER) activity. In this study, the nanostructure of TaS2films was controlled by controlling the Ar/H2S gas ratio used in plasma-enhanced chemical vapor deposition (PECVD). At a high Ar/H2S gas ratio, vertically aligned TaS2(V-TaS2) films were formed over a large-area (4 in) at a temperature of 250 °C, which, to the best of our knowledge, is the lowest temperature reported for PECVD. Furthermore, the plasma species formed in the injected gas at various Ar/H2S gas ratios were analyzed using optical emission spectroscopy to determine the synthesis mechanism. In addition, the 4 in wafer-scale V-TaS2was analyzed by x-ray photoelectron spectroscopy, transmission electron microscopy, and atomic force microscopy, and the HER performance of the as-synthesized TaS2fabricated with various Ar/H2S ratios was measured. The results revealed that, depending on the film structure of TaS2, the HER performance can be enhanced owing to its structural advantage. Furthermore, the excellent stability and robustness of V-TaS2was confirmed by conducting 1000 HER cycles and post-HER material characterization. This study provides important insights into the plasma-assisted nanostructural modification of 2D materials for application as enhanced electrocatalysts.

Application of laser-induced breakdown spectroscopy for detection of elements in flowback water samples from shale gas wells.

Laser-induced breakdown spectroscopy (LIBS) was applied to rapidly detect elements in flowback water samples from shale gas wells in Oklahoma. Two types of LIBS systems (aerosolization and collection on a substrate) were used. The LIBS with an aerosolization system provided rapid determination of elements in flowback water, but moisture present in the chamber and variation in the water droplet size could make quantification difficult. In the substrate collection system, a comparison among substrate types showed that a hydrophilic cellulose filter gave the most homogeneous sample distribution after drying and provided the best performance. The elements in flowback water samples were also determined by inductively coupled plasma-optical emission spectroscopy (ICP-OES). ICP-OES data showed spatial variations for the elements among the different wells. Among the elements, K showed the highest variation (relative standard ${\rm deviation} = {62.8}\% $deviation=62.8%) and Mg the lowest (relative standard ${\rm deviation} = {39.1}\% $deviation=39.1%). Good correlations (${ r} = {0.98 - 0.99}$r=0.98-0.99) were observed between Ca, K, Mg, and Na LIBS peak areas determined using the cellulose filter and their mass concentrations (ppm) measured by ICP-OES for aqueous solutions. The limits of detection for Ca, K, Mg, and Na by LIBS were 122 ppm, 68 ppm, 36 ppm, and 142 ppm, respectively. Both the LIBS and ICP-OES data showed that element concentrations in the flowback water samples were in the order of Na, Ca, Mg, and K from highest to lowest. Our data suggest that the LIBS technique could rapidly detect elements in flowback water samples on site. However, accurate quantification of elements present in low concentrations in water samples is limited.

A Novel Path Planning Algorithm for Truck Platooning Using V2V Communication.

In truck platooning, the leading vehicle is driven manually, and the following vehicles run by autonomous driving, with the short inter-vehicle distance between trucks. To successfully perform platooning in various situations, each truck must maintain dynamic stability, and furthermore, the whole system must maintain string stability. Due to the short front-view range, however, the following vehicles' path planning capabilities become significantly impaired. In addition, in platooning with articulated cargo trucks, the off-tracking phenomenon occurring on a curved road makes it hard for the following vehicle to track the trajectory of the preceding truck. In addition, without knowledge of the global coordinate system, it is difficult to correlate the local coordinate systems that each truck relies on for sensing environment and dynamic signals. In this paper, in order to solve these problems, a path planning algorithm for platooning of articulated cargo trucks has been developed. Using the Kalman filter, V2V (Vehicle-to-Vehicle) communication, and a novel update-and-conversion method, each following vehicle can accurately compute the trajectory of the leading vehicle's front part for using it as a target path. The path planning algorithm of this paper was validated by simulations on severe driving scenarios and by tests on an actual road. The results demonstrated that the algorithm could provide lateral string stability and robustness for truck platooning.

Application of various cytotoxic endpoints for the toxicity prioritization of fine dust (PM2.5) sources using a multi-criteria decision-making approach.

Fine dust (PM2.5) is generated from various sources, and many studies have reported on the sources of PM2.5. However, the current research on PM2.5 toxicity based on its sources is insufficient. In this study, we developed a framework for the prioritization of fine dust (PM2.5) sources on the basis of the multi-endpoint toxicities using the multi-criteria decision-making method (MCDM). To obtain the multi-endpoint toxicities of PM2.5 sources, cell mortality, reactive oxygen species (ROS), inflammation and mutagenicity were measured for diesel exhaust particles (DEP), gasoline exhaust particles (GEP), rice straw burning particles (RBP), coal combustion particles (CCP) and tunnel dust particles (TDP). The integrative toxicity score (ITS) of the PM2.5 source was calculated using MCDM, which consist of four steps: (1) defining the decision-making matrix, (2) normalization and weighting, (3) calculating the ITS (linear aggregation) and (4) a global sensitivity analysis. The indicator of cell mortality had the highest weight (0.3780) followed by inflammation (0.2471), ROS (0.2178) and mutagenicity (0.1571). Additionally, the ITS based on the sources contributing to PM2.5 resulted in the following order: DEP (0.89), GEP (0.44), RBP (0.40), CCP (0.23) and TDP (0.06). The relative toxicity index (RTI), which represents the ratio of toxicity due to the difference in sources, increases as the contribution of the highly toxic sources increases. The RTI over 1 is closely associated with an increased contribution from highly toxic sources, such as diesel exhaust, gasoline exhaust and biomass burning. It is necessary to investigate the toxicity of various PM2.5 sources and PM2.5 risk based on the sources.

Arctic Primary Aerosol Production Strongly Influenced by Riverine Organic Matter.

The sources of primary and secondary aerosols in the Arctic are still poorly known. A number of surface seawater samples-with varying degrees of Arctic riverine and sea ice influences-were used in a sea spray generation chamber to test them for their potential to produce sea spray aerosols (SSA) and cloud condensation nuclei (CCN). Our interdisciplinary data showed that both sea salt and organic matter (OM) significantly influenced the SSA production. The number concentration of SSA in the coastal samples was negatively correlated with salinity and positively correlated with a number of OM tracers, including dissolved and chromophoric organic carbon (DOC, CDOM), marine microgels and chlorophyll a (Chl-a) but not for viral and bacterial abundances; indicating that OM of riverine origin enhances primary aerosol production. When all samples were considered, transparent exopolymer particles (TEP) were found to be the best indicator correlating positively with the ratio number concentration of SSA/salinity. CCN efficiency was not observed to differ between the SSA from the various samples, despite differences in organic characteristics. It is suggested that the large amount of freshwater from river runoff have a substantial impact on primary aerosols production mechanisms, possibly affecting the cloud radiative forcing.

Free-space optical channel characterization and experimental validation in a coastal environment.

Over the years, free-space optical (FSO) communication has attracted considerable research interest owing to its high transmission rates via the unbounded and unlicensed bandwidths. Nevertheless, various weather conditions lead to significant deterioration of the FSO link capabilities. In this context, we report on the modelling of the channel attenuation coefficient (ß) for a coastal environment and related ambient, considering the effect of coastal air temperature (T), relative humidity (RH) and dew point (TD) by employing a mobile FSO communication system capable of achieving a transmission rate of 1 Gbps at an outdoor distance of 70 m for optical beam wavelengths of 1310 nm and 1550 nm. For further validation of the proposed models, an indoor measurement over a 1.5 m distance utilizing 1310 nm, 1550 nm, and 1064 nm lasers was also performed. The first model provides a general link between T and ß, while the second model provides a relation between ß, RH as well as TD. By validating our attenuation coefficient model with actual outdoor and indoor experiments, we obtained a scaling parameter x and decaying parameter c values of 19.94, 40.02, 45.82 and 0.03015, 0.04096, 0.0428 for wavelengths of 1550, 1310, 1064 nm, respectively. The proposed models are well validated over the large variation of temperature and humidity over the FSO link in a coastal region and emulated indoor environment.

Application of laser-induced breakdown spectroscopy for real-time detection of contamination particles during the manufacturing process.

A stand-off laser-induced breakdown spectroscopy (LIBS) system was developed to determine the elemental composition of contamination particles during semiconductor manufacturing. It successfully detected laboratory-generated monodisperse (size=200 nm and 300 nm) CaCl2 particles and internally mixed particles of CaCl2, MgCl2, NaCl, and KCl. Temperature and pressure effects on the LIBS emission signals were investigated. The peak area and signal-to-noise ratio of the emission lines increased with the temperature (25°C-250°C). Stronger emission lines were observed at higher pressure. Although temperature and pressure affect the LIBS signals, the developed stand-off LIBS could be employed for real-time detection of the elemental composition of contamination particles.

Comparison of the in vitro toxicological activity of various particulate matter.

Ultrafine particles (UFPs, < 2.5 µm) in air pollutants have been identified as a major cause of respiratory diseases, since they can affect the lung alveoli through the bronchus. In particular, if toxicants such as heavy metals and polycyclic aromatic hydrocarbons (PAHs) are present in UFPs, they can cause diseases such as asthma, chronic obstructive pulmonary disease, and lung cancer. This study compared in vitro toxicity of various particulate matter including UFPs from combustion particles of diesel (diesel exhaust particles (DEP)), rice straw (RS), pine stem (PS) and coal (CC), and road dust particles from tunnel (TD) and roadside (RD). UFPs from combustion particles and road dust were collected with a glass fiber filter using burning systems and a solid aerosol generator. Cell viability was determined by neutral red uptake assay using Chinese hamster ovary strain K1 cells. Redox cycling activity and intracellular reactive oxygen species were measured using 1,4-dithiothreitol (DTT) and 2',7'-dichlorofluorescin diacetate (DCF-DA) assay, respectively. Our in vitro studies validated that combustion particles had high toxicological activity. PS demonstrated the highest activity in cytotoxicity but DEP had the highest activity in the DTT and DCF-DA assays. Overall, since the toxicological activity of particles generated by various means was different, risk assessment should be conducted through various toxicity evaluations rather than one toxicity evaluation.

Combined toxic effect of airborne heavy metals on human lung cell line A549.

Many studies have demonstrated that heavy metals existing as a mixture in the atmospheric environment cause adverse effects on human health and are important key factors of cytotoxicity; however, little investigation has been conducted on a toxicological study of a metal mixture from atmospheric fine particulate matter. The objective of this study was to predict the combined effects of heavy metals in aerosol by using in vitro human cells and obtain a suitable mixture toxicity model. Arsenic, nickel, and lead were selected for mixtures exposed to A549 human lung cancer cells. Cell proliferation (WST-1), glutathione (GSH), and interleukin (IL)-8 inhibition were observed and applied to the prediction models of mixture toxicity, concentration addition (CA) and independent action (IA). The total mixture concentrations were set by an IC10-fixed ratio of individual toxicity to be more realistic for mortality and enzyme inhibition tests. The results showed that the IA model was statistically closer to the observed results than the CA model in mortality, indicating dissimilar modes of action. For the GSH inhibition, the results predicted by the IA and CA models were highly overestimated relative to mortality. Meanwhile, the IL-8 results were stable with no significant change in immune reaction related to inflammation. In conclusion, the IA model is a rapid prediction model in heavy metals mixtures; mortality, as a total outcome of cell response, is a good tool for demonstrating the combined toxicity rather than other biochemical responses.

20-meter underwater wireless optical communication link with 1.5 Gbps data rate.

The video streaming, data transmission, and remote control in underwater call for high speed (Gbps) communication link with a long channel length (~10 meters). We present a compact and low power consumption underwater wireless optical communication (UWOC) system utilizing a 450-nm laser diode (LD) and a Si avalanche photodetector. With the LD operating at a driving current of 80 mA with an optical power of 51.3 mW, we demonstrated a high-speed UWOC link offering a data rate up to 2 Gbps over a 12-meter-long, and 1.5 Gbps over a record 20-meter-long underwater channel. The measured bit-error rate (BER) are 2.8 × 10-5, and 3.0 × 10-3, respectively, which pass well the forward error correction (FEC) criterion.

Optical and thermal characteristics of carbonaceous aerosols measured at an urban site in Gwangju, Korea, in the winter of 2011.

UNLABELLED: Carbonaceous components (organic carbon [OC] and elemental carbon [EC]) and optical properties (light absorption and scattering) of fine particulate matter (aerodynamic diameter <2.5 µm; PM2.5) were simultaneously measured at an urban site in Gwangju, Korea, during the winter of 2011. OC was further classified into OC1, OC2, OC3, and OC4, based on a temperature protocol using a Sunset OC/EC analyzer. The average OC and EC concentrations were 5.0 ± 2.5 and 1.7 ± 0.9 µg C m(-3), respectively. The average single-scattering albedo (SSA) at a wavelength of 550 nm was 0.58 ± 0.11, suggesting that the aerosols observed in the winter of 2011 had a local warming effect in this area. During the whole sampling period, "stagnant PM" and "long-range transport PM" events were identified. The light absorption coefficient (babs) was higher during the stagnant PM event than during the long-range transport PM event due to the existence of abundant light-absorbing OC during the stagnant PM event. In particular, the OC2 and OC3 concentrations were higher during the stagnant PM event than those during the long-range transport event, suggesting that OC2 and OC3 might be more related to the light-absorbing OC. The light scattering coefficient (bscat) was similar between the events. On average, the mass absorption efficiency attributed to EC (σEC) was 9.6 m(2) g(-1), whereas the efficiency attributed to OC (σOC) was 1.8 m(2) g(-1) at λ = 550 nm. Furthermore, the σEC is comparable among the PM event days, but the σOC for the stagnant PM event was significantly higher than that for the long-range transport PM event (1.7 vs. 0.5). IMPLICATIONS: Optical and thermal properties of carbonaceous aerosol were measured at Gwangju, and carbonaceous aerosol concentration and optical property varied between "stagnant PM" and "long-range transport PM" events. More abundant light absorbing OC was observed during the stagnant PM event.

2.3 Gbit/s underwater wireless optical communications using directly modulated 520 nm laser diode.

We experimentally demonstrate a record high-speed underwater wireless optical communication (UWOC) over 7 m distance using on-off keying non-return-to-zero (OOK-NRZ) modulation scheme. The communication link uses a commercial TO-9 packaged pigtailed 520 nm laser diode (LD) with 1.2 GHz bandwidth as the optical transmitter and an avalanche photodiode (APD) module as the receiver. At 2.3 Gbit/s transmission, the measured bit error rate of the received data is 2.23×10(-4), well below the forward error correction (FEC) threshold of 2×10(-3) required for error-free operation. The high bandwidth of the LD coupled with high sensitivity APD and optimized operating conditions is the key enabling factor in obtaining high bit rate transmission in our proposed system. To the best of our knowledge, this result presents the highest data rate ever achieved in UWOC systems thus far.

Comparison of Hygroscopicity, Volatility, and Mixing State of Submicrometer Particles between Cruises over the Arctic Ocean and the Pacific Ocean.

Ship-borne measurements of ambient aerosols were conducted during an 11 937 km cruise over the Arctic Ocean (cruise 1) and the Pacific Ocean (cruise 2). A frequent nucleation event was observed during cruise 1 under marine influence, and the abundant organic matter resulting from the strong biological activity in the ocean could contribute to the formation of new particles and their growth to a detectable size. Concentrations of particle mass and black carbon increased with increasing continental influence from polluted areas. During cruise 1, multiple peaks of hygroscopic growth factor (HGF) of 1.1-1.2, 1.4, and 1.6 were found, and higher amounts of volatile organic species existed in the particles compared to that during cruise 2, which is consistent with the greater availability of volatile organic species caused by the strong oceanic biological activity (cruise 1). Internal mixtures of volatile and nonhygroscopic organic species, nonvolatile and less-hygroscopic organic species, and nonvolatile and hygroscopic nss-sulfate with varying fractions can be assumed to constitute the submicrometer particles. On the basis of elemental composition and morphology, the submicrometer particles were classified into C-rich mixture, S-rich mixture, C/S-rich mixture, Na-rich mixture, C/P-rich mixture, and mineral-rich mixture. Consistently, the fraction of biological particles (i.e., P-containing particles) increased when the ship traveled along a strongly biologically active area.

Chemical characteristics of long-range-transported fine particulate matter at Gosan, Jeju Island, in the spring and fall of 2008, 2009, 2011, and 2012.

UNLABELLED: Carbonaceous species (organic carbon [OC] and elemental carbon [EC]) and inorganic ions of particulate matter less than 2.5 µm (PM2.5) were measured to investigate the chemical characteristics of long-range-transported (LTP) PM2.5 at Gosan, Jeju Island, in Korea in the spring and fall of 2008-2012 (excluding 2010). On average, the non-sea-salt (nss) sulfate (4.2 µg/m3) was the most dominant species in the spring, followed by OC (2.6 µg/m3), nitrate (2.1 µg/m3), ammonium (1.7 µg/m3), and EC (0.6 µg/m3). In the fall, the nss-sulfate (4.7 µg/m3) was also the most dominant species, followed by OC (4.0 µg/m3), ammonium (1.7 µg/m3), nitrate (1.1 µg/m3), and EC (0.7 µg/m3). Both sulfate and OC were higher in the fall than in the spring, possibly due to more common northwest air masses (i.e., coming from China and Korea polluted areas) and more frequent biomass burnings in the fall. There was no clear difference in the EC between the spring and fall. The correlation between OC and EC was not strong; thus, the OC measured at Gosan was likely transported across a long distance and was not necessarily produced in a manner similar to the EC. Distinct types of LTP events (i.e., sulfate-dominant LTP versus OC-dominant LTP) were observed. In the sulfate-dominant LTP events, air masses directly arrived at Gosan without passing over the Korean Peninsula from the industrial area of China within 48 hr. During these events, the aerosol optical depth (AOD) increased to 1.63. Ionic balance data suggest that the long-range transported aerosols are acidic. In the OC-dominant LTP event, a higher residence time of air masses in Korea was observed (the air masses departing from the mainland of China arrived at the sampling site after passing Korea within 60-80 hr). IMPLICATIONS: In Northeast Asia, various natural and anthropogenic sources contribute to the complex chemical components and affect local/regional air quality and climate change. Chemical characteristics of long-range-transported (LTP) PM2.5 were investigated during spring and fall of 2008, 2009, 2011, and 2012. Based on air mass types, sulfate-dominant LTP and OC-dominant LTP were observed. A long-term variation and chemical characteristics of PM2.5 along with air mass and satellite data are required to better understand long-range-transported aerosols.

Mixing state of size-selected submicrometer particles in the Arctic in May and September 2012.

Aerosols have been associated with large uncertainties in estimates of the radiation budget and cloud formation processes in the Arctic. This paper reports the results of a study of in situ measurements of hygroscopicity, fraction of volatile species, mixing state, and off-line morphological and elemental analysis of Aitken and accumulation mode particles in the Arctic (Ny-Ålesund, Svalbard) in May and September 2012. The accumulation mode particles were more abundant in May than in September. This difference was due to more air mass flow from lower latitude continental areas, weaker vertical mixing, and less wet scavenging in May than in September, which may have led to a higher amount of long-range transport aerosols entering the Arctic in the spring. The Aitken mode particles observed intermittently in May were produced by nucleation, absent significant external mixing, whereas the accumulation mode particles displayed significant external mixing. The occurrence of an external mixing state was observed more often in May than in September and more often in accumulation mode particles than in Aitken mode particles, and it was associated more with continental air masses (Siberian) than with other air masses. The external mixing of the accumulation mode particles in May may have been caused by multiple sources (i.e., long-range transport aerosols with aging and marine aerosols). These groups of externally mixed particles were subdivided into different mixing structures (internal mixtures of predominantly sulfates and volatile organics without nonvolatile species and internal mixtures of sulfates and nonvolatile components, such as sea salts, minerals, and soot). The variations in the mixing states and chemical species of the Arctic aerosols in terms of their sizes, air masses, and seasons suggest that the continuous size-dependent measurements observed in this study are useful for obtaining better estimates of the effects of these aerosols on climate change.

Effect of diesel exhaust particles on RANK/RANKL expression in in vivo and in vitro models of middle ear inflammation.

OBJECTIVE: Increasing evidence suggests a link between middle ear inflammation and the development of diesel exhaust particles (DEPs). Chronic middle ear inflammation can lead to bone damage and remodeling. This study aimed to explore the impact of DEPs on the expression of interleukin (IL)-6 and RANKL under conditions of middle ear inflammation. METHODS: DEPs were collected by burning fuel in a diesel engine at the Gwangju Institute of Science and Technology. Human middle ear epithelial cells were cultured to 70-80% confluence in culture plates and then treated with DEPs at concentrations of 0, 5, 10, 20, 40, and 80 µg/mL for 24 h. Cell viability was assessed manually. B6.SJL mice, aged 9 weeks, were exposed to DEPs at a concentration of 200 µg/m3 for 1 h daily over a period of 28 days. The expression levels of IL-6, tumor necrosis factor α, RANKL, and RANK were evaluated using hematoxylin and eosin staining and western blot analysis of the harvested middle ear samples. RESULTS: The viability of human middle ear epithelial cells was found to decrease in a dose-dependent manner after 24 h. The mRNA expression level of IL-6 exhibited the most significant increase at the 48-h mark. In contrast, the mRNA expression levels of RANKL and RANK showed a marked increase as early as 6 h post-exposure, with both genes subsequently displaying a time-dependent decrease. Histological analysis revealed that the middle ear mucosa was thicker in the group exposed to DEPs compared to the control group. Additionally, the protein expression levels of IL-6 and RANKL were elevated in the DEP-exposed group relative to the normal control group. CONCLUSIONS: We confirmed the expression of osteoclast-related proteins in the mouse middle ear. These results imply that air pollutants might affect RANKL/RANK signaling, which is associated with bone remodeling.

New health index derived from oxidative potential and cell toxicity of fine particulate matter to assess its potential health effect.

Toxicological data and exposure levels of fine particulate matters (PM2.5) are necessary to better understand their health effects. Simultaneous measurements of PM2.5 oxidative potential (OP) and cell toxicity in urban areas (Beijing, China and Gwangju, Korea) reveal their dependence on chemical composition. Notably, acids (Polar), benzocarboxylic acids, and Pb were the chemical components that affected both OP and cell toxicity. OP varied more significantly among different locations and seasons (winter and summer) than cell toxicity. Using the measured OP, cell toxicity, and PM2.5 concentration, a health index was developed to better assess the potential health effects of PM2.5. The health index was related to the sources of PM2.5 derived from the measured chemical components. The contributions of secondary organic aerosols and dust to the proposed health index were more significant than their contributions to PM2.5 mass. The developed regression equation was used to predict the health effect of PM2.5 without further toxicity measurements. This new index could be a valuable health metric that provides information beyond just the PM2.5 concentration level.