Position and momentum mapping of vibrations in graphene nanostructures.

Propagating atomic vibrational waves-phonons-determine important thermal, mechanical, optoelectronic and transport characteristics of materials. Thus a knowledge of phonon dispersion (that is, the dependence of vibrational energy on momentum) is a key part of our understanding and optimization of a material's behaviour. However, the phonon dispersion of a free-standing monolayer of a two-dimensional material such as graphene, and its local variations, have remained elusive for the past decade because of the experimental limitations of vibrational spectroscopy. Even though electron energy loss spectroscopy (EELS) in transmission has recently been shown to probe local vibrational charge responses1-4, such studies are still limited by momentum space integration due to the focused beam geometry; they are also restricted to polar materials such as boron nitride or oxides1-4, in which huge signals induced by strong dipole moments are present. On the other hand, measurements on graphene performed by inelastic X-ray (neutron) scattering spectroscopy5-7 or EELS in reflection8,9 do not have any spatial resolution and require large microcrystals. Here we provide a new pathway to determine phonon dispersions down to the scale of an individual free-standing graphene monolayer by mapping the distinct vibrational modes for a large momentum transfer. The measured scattering intensities are accurately reproduced and interpreted with density functional perturbation theory10. Additionally, a nanometre-scale mapping of selected momentum-resolved vibrational modes using graphene nanoribbon structures has enabled us to spatially disentangle bulk, edge and surface vibrations. Our results are a proof-of-principle demonstration of the feasibility of studying local vibrational modes in two-dimensional monolayer materials at the nanometre scale.

Advanced 1D heterostructures based on nanotube templates and molecules.

Recent advancements in materials science have shed light on the potential of exploring hierarchical assemblies of molecules on surfaces, driven by both fundamental and applicative challenges. This field encompasses diverse areas including molecular storage, drug delivery, catalysis, and nanoscale chemical reactions. In this context, the utilization of nanotube templates (NTs) has emerged as promising platforms for achieving advanced one-dimensional (1D) molecular assemblies. NTs offer cylindrical, crystalline structures with high aspect ratios, capable of hosting molecules both externally and internally (Mol@NT). Furthermore, NTs possess a wide array of available diameters, providing tunability for tailored assembly. This review underscores recent breakthroughs in the field of Mol@NT. The first part focuses on the diverse panorama of structural properties in Mol@NT synthesized in the last decade. The advances in understanding encapsulation, adsorption, and ordering mechanisms are detailed. In a second part, the review highlights the physical interactions and photophysics properties of Mol@NT obtained by the confinement of molecules and nanotubes in the van der Waals distance regime. The last part of the review describes potential applicative fields of these 1D heterostructures, providing specific examples in photovoltaics, luminescent materials, and bio-imaging. A conclusion gathers current challenges and perspectives of the field to foster discussion in related communities.

Excitonic Effects in Energy-Loss Spectra of Freestanding Graphene.

In this work, we perform electron energy-loss spectroscopy (EELS) of freestanding graphene with high energy and momentum resolution to disentangle the quasielastic scattering from the excitation gap of Dirac electrons close to the optical limit. We show the importance of many-body effects on electronic excitations at finite transferred momentum by comparing measured EELS to ab initio calculations at increasing levels of theory. Quasi-particle corrections and excitonic effects are addressed within the GW approximation and the Bethe-Salpeter equation, respectively. Both effects are essential in the description of the EEL spectra to obtain a quantitative agreement with experiments, with the position, dispersion, and shape of both the excitation gap and the π plasmon being significantly affected by excitonic effects.

Molybdenum Mobility During Managed Aquifer Recharge in Carbonate Aquifers.

The mobility of molybdenum (Mo) in groundwater systems has received little attention, although a high intake of Mo is known to be detrimental to human and animal health. Here, we used a comprehensive hydrochemical data set collected during a multi-cycle aquifer storage and recovery test to study the mechanisms that control the mobility of Mo under spatially and temporally varying hydrochemical conditions. The model-based interpretation of the data indicated that the initial mobilization of Mo occurs as a sequence of reactions, in which (i) the aerobic injectant induces pyrite oxidation, (ii) the released acidity is partially buffered by the dissolution of dolomite that (iii) leads to the release of Mo with highly soluble sulfurized organic matter prevailing between the intercrystalline spaces of the dolomite matrix or incorporated in dolomite crystals. Once released, Mo mobility was primarily controlled by pH-dependent surface complexation reactions to the sediments and, to a lesser extent, the capture by iron sulfides (FeS). In the studied system, Mo mobilization could be effectively mitigated by reducing or eliminating pyrite oxidation, which decreases the likelihood of dolomite dissolution and associated Mo release.

Tip-Enhanced Stokes-Anti-Stokes Scattering from Carbyne.

Carbyne, a linear chain of carbon atoms, is the truly one-dimensional allotrope of carbon and the strongest known Raman scatterer. Here, we use tip-enhanced Raman scattering (TERS) to further enhance the Raman response of a single carbyne chain confined inside a double-walled carbon nanotube. We observe an increase of the anti-Stokes scattering by a factor of 3290 and a 22-fold enhancement of the anti-Stokes/Stokes ratio relative to far-field measurements. The power dependence of the anti-Stokes/Stokes ratio under TERS conditions is indicative of coherent Stokes-anti-Stokes scattering mediated by an excited phonon. The role of resonance effects and laser-induced heating are discussed and potential opportunities are outlined.

Molybdenum Release Triggered by Dolomite Dissolution: Experimental Evidence and Conceptual Model.

The injection of oxygenated water into anoxic aquifers during managed aquifer recharge (MAR) can cause the mobilization of metal(loid)s. Here, we study the processes controlling MAR-induced molybdenum (Mo) release in dolomitic aquifers. Sequential chemical extractions and energy dispersive X-ray spectroscopy combined with scanning electron microscopy point to an association of Mo with easily soluble sulfurized organic matter present in intercrystalline spaces of dolomites or directly incorporated within dolomite crystals. The easily soluble character was confirmed by a batch experiment that demonstrated the rapid mobilization of Mo, dissolved organic carbon, and sulfur. The type and time of batch solution contact with the sulfurized organic matter impacted the release of Mo, as demonstrated by a 36% increase in Mo concentrations when shaking was intensified. Based on the experimental results, a conceptual model for the release of Mo was formulated, where (i) the injection of oxygenated water causes the oxidation of pyrite in the aquifer matrix, and (ii) the associated release of protons (H+) induces the dissolution of dolomite as a buffering reaction, which (iii) enhances the accessibility of the injectant to intercrystalline and incorporated sulfurized organic matter within dolomite, causing the release of Mo.

Highly Sensitive and Selective Formaldehyde Gas Sensors Based on Polyvinylpyrrolidone/Nitrogen-Doped Double-Walled Carbon Nanotubes.

A highly sensitive and selective formaldehyde sensor was successfully fabricated using hybrid materials of nitrogen-doped double-walled carbon nanotubes (N-DWCNTs) and polyvinylpyrrolidone (PVP). Double-walled carbon nanotubes (DWCNTs) and N-DWCNTs were produced by high-vacuum chemical vapor deposition using ethanol and benzylamine, respectively. Purified DWCNTs and N-DWCNTs were dropped separately onto the sensing substrate. PVP was then dropped onto pre-dropped DWCNT and N-DWCNTs (hereafter referred to as PVP/DWCNTs and PVP/N-DWCNTs, respectively). As-fabricated sensors were used to find 1,2-dichloroethane, dichloromethane, formaldehyde and toluene vapors in parts per million (ppm) at room temperature for detection measurement. The sensor response of N-DWCNTs, PVP/DWCNTs and PVP/N-DWCNTs sensors show a high response to formaldehyde but a low response to 1,2-dichloroethane, dichloromethane and toluene. Remarkably, PVP/N-DWCNTs sensors respond sensitively and selectively towards formaldehyde vapor, which is 15 times higher than when using DWCNTs sensors. This improvement could be attributed to the synergistic effect of the polymer swelling and nitrogen-sites in the N-DWCNTs. The limit of detection (LOD) of PVP/N-DWCNTs was 15 ppm, which is 34-fold higher than when using DWCNTs with a LOD of 506 ppm. This study demonstrated the high sensitivity and selectivity for formaldehyde-sensing applications of high-performance PVP/N-DWCNTs hybrid materials.

Toward Confined Carbyne with Tailored Properties.

Confining carbyne to a space that allows for stability and controlled reactivity is a very appealing approach to have access to materials with tunable optical and electronic properties without rival. Here, we show how controlling the diameter of single-walled carbon nanotubes opens the possibility to grow a confined carbyne with a defined and tunable band gap. The metallicity of the tubes has a minimal influence on the formation of the carbyne, whereas the diameter plays a major role in the growth. It has been found that the properties of confined carbyne can be tailored independently from its length and how these are mostly determined by its interaction with the carbon nanotube. Molecular dynamics simulations have been performed to interpret these findings. Furthermore, the choice of a single-walled carbon nanotube host has been proven crucial even to synthesize an enriched carbyne with the smallest energy gap currently reported and with remarkable homogeneity.

Raman Scattering Cross Section of Confined Carbyne.

We experimentally quantify the Raman scattering from individual carbyne chains confined in double-walled carbon nanotubes. We find that the resonant differential Raman cross section of confined carbyne is on the order of 10-22 cm2 sr-1 per atom, making it the strongest Raman scatterer ever reported.

Optimization and assessment of a sequential extraction procedure for calcium carbonate rocks.

Sequential extraction analyses are widely used for the determination of element speciation in sediments and soils. Typical sequential extraction protocols were developed to extract from low-carbonate samples and therefore are not necessarily suitable for high-carbonate samples. In this study, we tested increased reagent to sample ratios to adjust an existing sequential extraction procedure to analyze high-CaCO3 samples with concentrations ranging from 70 to above 90 %. Complete dissolution of the CaCO3 phase, and a higher extraction efficiency of manganese associated with the carbonate phase, was achieved when using four times the original reagent to sample ratio in the 2nd extraction step. This increase of reagent did not compromise the extraction of subsequent phases as shown by unaffected Fe concentrations in a low-carbonate sample. Hence, an essential outcome was that increasing the solution to sample ratio did not lead to the dissolution of other sedimentary phases, such as hydrous and crystalline iron oxides or sulfides. Thus, compared to other extraction protocols that use a lower reagent to sample ratio in the carbonate dissolution step, the new protocol allowed the complete extraction of oxide and sulfide phases in the following extraction steps. Furthermore, the study demonstrated the benefit of replacing Na-acetate with NH4-acetate to extract exchangeable ions and carbonates. We observed increased intensities for several analytes, i.e., trace metals such as Mo and As, due to less suppression of the analyte signal by NH4-acetate than by Na-acetate during analysis by inductively coupled plasma optical emission spectrometry (ICP-OES).

Isotopic Labelling of Confined Carbyne.

Carbyne is a one-dimensional allotrope of carbon consisting of a linear chain of carbon atoms bonded to each other with exceptional strength. Its outstanding mechanical, optical, and electronic properties have been theoretically predicted, but its stability has only been achieved when grown encapsulated in the hollow core of carbon nanotubes. One of the advantages of this confinement is that its properties can be controlled by the chain's length and surrounding environment. We investigated an alternative way of gaining control of its properties is using isotope labelling as tuning mechanism. The optimized liquid precursor was first chosen among several options, which can greatly enhance the yield of the confined carbyne. Then isotopic labelled liquid precursor was encapsulated for further synthesis of isotopic labelled confined carbyne. This allowed us to obtain pioneering results on isotope engineered carbyne with around 11.9 % of 13 C-labelling using 13 C-methanol as precursor.

Probing Exciton Dispersions of Freestanding Monolayer WSe_{2} by Momentum-Resolved Electron Energy-Loss Spectroscopy.

Excitons, as bound electron-hole paired quasiparticle, play an essential role in the energy transport in the optical-electric properties of semiconductors. Their momentum-energy dispersion relation is a fundamental physical property of great significance to understand exciton dynamics. However, this dispersion is seldom explored especially in two-dimensional transition metal dichalcogenides with rich valleytronic properties. In this work, momentum resolved electron energy-loss spectroscopy was used to measure the dispersions of excitons in freestanding monolayer WSe_{2}. Besides the parabolically dispersed valley excitons, a subgap dispersive exciton was observed at nonzero momenta for the first time, which can be introduced by the prolific Se vacancies. Our work provides a paradigm to directly probe exciton dispersions in 2D semiconductors and could be generalized to many low-dimensional systems.

Cadmium in soils and groundwater: A review.

Cadmium (Cd) is a non-essential trace element that is widely distributed in the environment. Both geogenic and anthropogenic sources can elevate Cd concentrations in soils and groundwater, which are important for maintaining healthy supplies of food and safe drinking water. Elevated Cd doses are carcinogenic to humans. The WHO Guidelines for Drinking-Water Quality recommend a guideline value for Cd of 3 µg/L. Important anthropogenic Cd sources include mining, atmospheric deposition of combustion emissions, and the use of Cd-containing fertilizers. We document several cases of Cd pollution in soil and groundwater based on worldwide accounts. Besides anthropogenic Cd sources, Cd is also incorporated into sulfides, carbonates, and phosphorites resulting in elevated Cd concentrations in associated rock types. The crustal median Cd content is 0.2 mg/kg. In soils, Cd occurs at concentrations of 0.01 to 1 mg/kg with a worldwide mean of 0.36 mg/kg. Weathering can lead to Cd concentrations up to 5 µg/L in soil water and up to 1 µg/L in groundwater. In aqueous solutions, Cd generally occurs as the divalent Cd2+ and it is mobilized mainly in oxic, acidic conditions. Cadmium sorption is enhanced by the presence of high amounts of hydrous oxides, clay minerals, and organic matter, and its mobility is further influenced by pH, the redox state, and ionic strength of the solution. However, Cd can remain in solution as water-soluble complexes with anions, such as CdCl+ and Cd(SO4)2 2-, and dissolved organic matter while sorption and precipitation decrease the aqueous concentration of most other heavy metals. As a consequence, Cd is one of the most mobile heavy metals in the environment. The elevated mobilization potential, e.g., through competition and ligand induced desorption, is the reason for faster Cd release from soil into groundwater than other heavy metals. The goal of this study was to present a broad overview of the origin and concentration of Cd in groundwater, and its reaction pathways in aquatic environments. To gain an overview of the hydrochemical behavior of Cd, cases of Cd pollution in soil and groundwater, studies investigating Cd release, and information about the legal framework were compiled.

Carbon Nanotube Chirality Determines Properties of Encapsulated Linear Carbon Chain.

Long linear carbon chains (LLCCs) encapsulated inside double-walled carbon nanotubes (DWCNTs) are regarded as a promising realization of carbyne, the truly one-dimensional allotrope of carbon. While the electronic and vibronic properties of the encapsulated LLCC are expected to be influenced by its nanotube host, this dependence has not been investigated experimentally so far. Here we bridge this gap by studying individual LLCCs encapsulated in DWCNTs with tip-enhanced Raman scattering (TERS). We reveal that the nanotube host, characterized by its chirality, determines the vibronic and electronic properties of the encapsulated LLCC. By choice of chirality, the fundamental Raman mode (C-mode) of the chain is tunable by ∼95 cm-1 and its band gap by ∼0.6 eV, suggesting this one-dimensional hybrid system to be a promising building block for nanoscale optoelectronics. No length dependence of the chain's C-mode frequency is evident, making LLCCs a close to perfect representation of carbyne.

Direct Proof of a Defect-Modulated Gap Transition in Semiconducting Nanotubes.

Measurements of optical properties at a nanometer level are of central importance for the characterization of optoelectronic devices. It is, however, difficult to use conventional light-probe measurements to determine the local optical properties from a single quantum object with nanometrical inhomogeneity. Here, we successfully measured the optical gap transitions of an individual semiconducting carbon nanotube with defects by using a monochromated electron source as a probe. The optical conductivity extracted from an electron energy-loss spectrum for a certain type of defect presents a characteristic modification near the lowest excitation peak ( E11), where excitons and nonradiative transitions, as well as phonon-coupled excitations, are strongly involved. Detailed line-shape analysis of the E11 peak clearly shows different degrees of exciton lifetime shortening and electronic state modification according to the defect type.

Wall- and Hybridisation-Selective Synthesis of Nitrogen-Doped Double-Walled Carbon Nanotubes.

Controlled nitrogen-doping is a powerful methodology to modify the properties of carbon nanostructures and produce functional materials for electrocatalysis, energy conversion and storage, and sensing, among others. Herein, we report a wall- and hybridisation-selective synthetic methodology to produce double-walled carbon nanotubes with an inner tube doped exclusively with graphitic sp2 -nitrogen atoms. Our measurements shed light on the fundamental properties of nitrogen-doped nanocarbons opening the door for developing their potential applications.

Lattice Opening upon Bulk Reductive Covalent Functionalization of Black Phosphorus.

The chemical bulk reductive covalent functionalization of thin-layer black phosphorus (BP) using BP intercalation compounds has been developed. Through effective reductive activation, covalent functionalization of the charged BP by reaction with organic alkyl halides is achieved. Functionalization was extensively demonstrated by means of several spectroscopic techniques and DFT calculations; the products showed higher functionalization degrees than those obtained by neutral routes.

Confined linear carbon chains as a route to bulk carbyne.

Strong chemical activity and extreme instability in ambient conditions characterize carbyne, an infinite sp(1) hybridized carbon chain. As a result, much less has been explored about carbyne as compared to other carbon allotropes such as fullerenes, nanotubes and graphene. Although end-capping groups can be used to stabilize carbon chains, length limitations are still a barrier for production, and even more so for application. We report a method for the bulk production of long acetylenic linear carbon chains protected by thin double-walled carbon nanotubes. The synthesis of very long arrangements is confirmed by a combination of transmission electron microscopy, X-ray diffraction and (near-field) resonance Raman spectroscopy. Our results establish a route for the bulk production of exceptionally long and stable chains composed of more than 6,000 carbon atoms, representing an elegant forerunner towards the final goal of carbyne's bulk production.

Electron Spectroscopy of Single Quantum Objects To Directly Correlate the Local Structure to Their Electronic Transport and Optical Properties.

Physical property of a single quantum object is governed by its precise atomic arrangement. The direct correlation of localized physical properties with the atomic structures has been therefore strongly desired but still limited in the theoretical studies. Here, we have successfully examined the localized electronic properties of individual carbon nanotubes by means of high-resolution electron energy-loss spectroscopy combined with high-resolution transmission electron microscopy. Well-separated sharp peaks at the carbon K(1s) absorption edge and in the valence-loss spectra are obtained from a single freestanding carbon nanotube with the local chiral index and unambiguously identified as the transitions between the van Hove singularities. The spectra features clearly vary upon the different areas even in the individual carbon nanotube. Variations in interband transitions, plasmonic behaviors, and unoccupied electronic structures are clearly attributed to the local irregular atomic arrangement such as topological defect and/or elastic bond stretching.

Exploring the Formation of Black Phosphorus Intercalation Compounds with Alkali Metals.

Black phosphorus intercalation compounds (BPICs) with alkali metals (namely: K and Na) have been synthesized in bulk by solid-state as well as vapor-phase reactions. By means of a combination of in situ X-ray diffraction, Raman spectroscopy, and DFT calculations the structural behavior of the BPICs at different intercalation stages has been demonstrated for the first time. Our results provide a glimpse into the very first steps of a new family of intercalation compounds, with a distinct behavior as compared to its graphite analogues (GICs), showing a remarkable structural complexity and a dynamic behavior.