Microfluidic Device for Patient-Centric Multiplexed Assays with Readout in Centralized Laboratories.

Patient-centric sampling strategies, where the patient performs self-sampling and ships the sample to a centralized laboratory for readout, are on the verge of widespread adaptation. However, the key to a successful patient-centric workflow is user-friendliness, with few noncritical user interactions, and simple, ideally biohazard-free shipment. Here, we present a capillary-driven microfluidic device designed to perform the critical biomarker capturing step of a multiplexed immunoassay at the time of sample collection. On-chip sample drying enables biohazard-free shipment and allows us to make use of advanced analytics of specialized laboratories that offer the needed analytical sensitivity, reliability, and affordability. Using C-Reactive Protein, MCP1, S100B, IGFBP1, and IL6 as model blood biomarkers, we demonstrate the multiplexing capability and applicability of the device to a patient-centric workflow. The presented quantification of a biomarker panel opens up new possibilities for e-doctor and e-health applications.

Absorbable cyst brushes.

Cytobrushes are used for low-invasive sample collection and screening in multiple diseases, with a significant impact on early detection, prevention, and diagnosis. This study focuses on improving the safety of cell brushing in hard-to-reach locations by exploring brush construction from absorbable materials. We investigated the efficacy of loop brushes made of absorbable suture wires of Chirlac, Chirasorb, Monocryl, PDS II, Vicryl Rapid, Glycolon, and Catgut during their operation in conjunction with fine-needle aspiration in an artificial cyst model. PDS II brushes demonstrated the highest efficiency, while Monocryl and Catgut also provided a significant brushing effect. Efficient brushes portrayed higher flexural rigidity than their counterparts, and their efficiency was inversely proportional to their plastic deformation by the needle. Our results open avenues for safer cell biopsies in hard-to-reach locations by utilizing brushes composed of absorbable materials.

Self-sealing MEMS spray-nozzles to prevent bacterial contamination of portable inhalers for aqueous drug delivery.

Pulmonary drug delivery by portable inhalers is the gold standard in lung disease therapy. An increasing focus on environmentally friendly inhalation currently spurs the development of propellant-free devices. However, the absence of propellants in the drug creates a need for suitable sealing systems that can ensure the pathogenic safety of devices. Traditionally, liquid drug inhalers incorporate a spray nozzle and a separate check valve. Here we show a fully integrated MEMS-based spray system for aqueous drug solutions and demonstrate its bacterial safety. The device comprises a thin silicon membrane with spray orifices, which self-seal against a compliant parylene valve seat underneath. This sealing system prevents bacterial ingrowth in its default closed state, while actuation lifts the membrane from the valve seat upon pressurization and sprays an inhalable aerosol from the nozzles. To seal against bacterial contamination effectively, we found that a contact force between the valve seat and the membrane (featuring the spray nozzles) is needed. In our testing, both self-sealing and an otherwise identical unvalved version of the spray chip can be bacterially safe in continued use when thoroughly cleaned of excess fluids and subjected to low bacterial loads for brief periods. However, when directly exposed to [Formula: see text] CFU/ml of our test organism Citrobacter rodentium for 24 h, unvalved systems become contaminated in nearly 90% of cases. In contrast, self-sealing spray chips reduced contamination probability by 70%. This development may enable preservative-free drug formulations in portable inhalers that use propellant-free aqueous drug solutions.

Evaluation of a Volumetric Dried Blood Spot Card Using a Gravimetric Method and a Bioanalytical Method with Capillary Blood from 44 Volunteers.

Dried blood spot (DBS) sampling is a promising method for collection of microliter blood samples. However, hematocrit-related bias in combination with subpunch analysis can result in inaccurate quantification of analytes in DBS samples. In this study we use a microfluidic DBS card, designed to automatically collect fixed volume DBS samples irrespective of the blood hematocrit, to measure caffeine concentration in normal finger prick samples obtained from 44 human individuals. Caffeine levels originating from blood drops of unknown volume collected on the volumetric microfluidic DBS card were compared to volume-controlled pipetted DBS samples from the same finger prick. Hematocrit independence and volumetric sampling performances were also verified on caffeine-spiked blood samples in vitro, using both LC-MS/MS and gravimetric methods, on hematocrits from 26 to 62%. The gravimetric measurements show an excellent metering performance of the microfluidic DBS card, with a mean blood sample volume of 14.25 µL ± 3.0% ( n = 51). A measured mean bias below 2.9% compared to normal hematocrit (47%) demonstrates that there is no significant hematocrit-induced bias. LC-MS/MS measurements confirm low CV and hematocrit independence of the sampling system and exhibit no substantial mean bias compared to pipetted DBS. Tests with 44 individuals demonstrated applicability of the microfluidic DBS card for direct finger prick blood sampling, and measured caffeine concentrations show a good agreement with measurements of pipetted DBS. The presented concept demonstrates a good volumetric performance which can help to improve the accuracy of DBS analysis by analyzing a whole spot, equivalent to a defined volume of liquid blood.

An Autonomous Microfluidic Device for Generating Volume-Defined Dried Plasma Spots.

Obtaining plasma from a blood sample and preparing it for subsequent analysis is currently a laborious process involving experienced health-care professionals and centrifugation. We circumvent this by utilizing capillary forces and microfluidic engineering to develop an autonomous plasma sampling device that filters and stores an exact amount of plasma as a dried plasma spot (DPS) from a whole blood sample in less than 6 min. We tested 24 prototype devices with whole blood from 10 volunteers, various input volumes (40-80 µL), and different hematocrit levels (39-45%). The resulting mean plasma volume, assessed gravimetrically, was 11.6 µL with a relative standard deviation similar to manual pipetting (3.0% vs 1.4%). LC-MS/MS analysis of caffeine concentrations in the generated DPS (12 duplicates) showed a strong correlation ( R2 = 0.99) to, but no equivalence with, concentrations prepared from corresponding plasma obtained by centrifugation. The presented autonomous DPS device may enable patient-centric plasma sampling through minimally invasive finger-pricking and allow generatation of volume-defined DPS for quantitative blood analysis.

Wearable All-Solid-State Potentiometric Microneedle Patch for Intradermal Potassium Detection.

A new analytical all-solid-state platform for intradermal potentiometric detection of potassium in interstitial fluid is presented here. Solid microneedles are modified with different coatings and polymeric membranes to prepare both the potassium-selective electrode and reference electrode needed for the potentiometric readout. These microneedle-based electrodes are fixed in an epidermal patch suitable for insertion into the skin. The analytical performances observed for the potentiometric cell (Nernstian slope, limit of detection of 10-4.9 potassium activity, linear range of 10-4.2 to 10-1.1, drift of 0.35 ± 0.28 mV h-1), together with a fast response time, adequate selectivity, and excellent reproducibility and repeatability, are appropriate for potassium analysis in interstitial fluid within both clinical and harmful levels. The potentiometric response is maintained after several insertions into animal skin, confirming the resiliency of the microneedle-based sensor. Ex vivo tests based on the intradermal detection of potassium in chicken and porcine skin demonstrate that the microneedle patch is suitable for monitoring potassium changes inside the skin. In addition, the dimensions of the microneedles modified with the corresponding layers necessary to enhance robustness and provide sensing capabilities (1000 µm length, 45° tip angle, 15 µm thickness in the tip, and 435 µm in the base) agree with the required ranges for a painless insertion into the skin. In vitro cytotoxicity experiments showed that the patch can be used for at least 24 h without any side effect for the skin cells. Overall, the developed concept constitutes important progress in the intradermal analysis of ions related to an electrolyte imbalance in humans, which is relevant for the control of certain types of diseases.

High-Yield Passive Plasma Filtration from Human Finger Prick Blood.

Whole-blood microsampling provides many benefits such as remote, patient-centric, and minimally invasive sampling. However, blood plasma, and not whole blood, is the prevailing matrix in clinical laboratory investigations. The challenge with plasma microsampling is to extract plasma volumes large enough to reliably detect low-concentration analytes from a small finger prick sample. Here we introduce a passive plasma filtration device that provides a high extraction yield of 65%, filtering 18 µL of plasma from 50 µL of undiluted human whole blood (hematocrit 45%) within less than 10 min. The enabling design element is a wedge-shaped connection between the blood filter and the hydrophilic bottom surface of a capillary channel. Using finger prick and venous blood samples from more than 10 healthy volunteers, we examined the filtration kinetics of the device over a hematocrit range of 35-55% and showed that 73 ± 8% of the total protein content was successfully recovered after filtration. The presented plasma filtration device tackles a major challenge toward patient-centric blood microsampling by providing high-yield plasma filtration, potentially allowing reliable detection of low-concentration analytes from a blood microsample.

Real-time intradermal continuous glucose monitoring using a minimally invasive microneedle-based system.

Continuous glucose monitoring (CGM) has the potential to greatly improve diabetes management. The aim of this work is to show a proof-of-concept CGM device which performs minimally invasive and minimally delayed in-situ glucose sensing in the dermal interstitial fluid, combining the advantages of microneedle-based and commercially available CGM systems. The device is based on the integration of an ultra-miniaturized electrochemical sensing probe in the lumen of a single hollow microneedle, separately realized using standard silicon microfabrication methods. By placing the sensing electrodes inside the lumen facing an opening towards the dermal space, real-time measurement purely can be performed relying on molecular diffusion over a short distance. Furthermore, the device relies only on passive capillary lumen filling without the need for complex fluid extraction mechanisms. Importantly, the transdermal portion of the device is 50 times smaller than that of commercial products. This allows access to the dermis and simultaneously reduces tissue trauma, along with being virtually painless during insertion. The three-electrode enzymatic sensor alone was previously proven to have satisfactory sensitivity (1.5 nA/mM), linearity (up to 14 mM), selectivity, and long-term stability (up to 4 days) in-vitro. In this work we combine this sensor technology with microneedles for reliable insertion in forearm skin. In-vivo human tests showed the possibility to correctly and dynamically track glycaemia over time, with approximately 10 min delay with respect to capillary blood control values, in line with the expected physiological lag time. The proposed device can thus reduce discomfort and potentially enable less invasive real-time CGM in diabetic patients.

Nanopore arrays in a silicon membrane for parallel single-molecule detection: fabrication.

Solid state nanopores enable translocation and detection of single bio-molecules such as DNA in buffer solutions. Here, sub-10 nm nanopore arrays in silicon membranes were fabricated by using electron-beam lithography to define etch pits and by using a subsequent electrochemical etching step. This approach effectively decouples positioning of the pores and the control of their size, where the pore size essentially results from the anodizing current and time in the etching cell. Nanopores with diameters as small as 7 nm, fully penetrating 300 nm thick membranes, were obtained. The presented fabrication scheme to form large arrays of nanopores is attractive for parallel bio-molecule sensing and DNA sequencing using optical techniques. In particular the signal-to-noise ratio is improved compared to other alternatives such as nitride membranes suffering from a high-luminescence background.

A MEMS-based passive hydrocephalus shunt for body position controlled intracranial pressure regulation.

This paper reports a novel micro electro mechanical system (MEMS) valve with posture controlled flow characteristics for improved treatment of hydrocephalus, a disease that is characterized by elevated pressure in the cerebrospinal fluid (CSF) that surrounds the brain and spinal cord. In contrast to conventional differential pressure CSF valves, the CSF valve presented here features a third port which utilizes hydrostatic pressure from a pressure compensating catheter to adapt CSF drainage to optimized levels irrespective of body position. Prototypes have been fabricated using standard MEMS manufacturing processes and the experimental evaluation successfully showed that the flow rate was adjustable with a varying hydrostatic pressure on the third port. Measured data showed that flow rate was at near ideal values at laying body position and that the flow rate can be adjusted to optimal values at standing body position by selecting an appropriate length of the pressure compensating catheter. This is the first pressure balanced CSF valve intended for body position controlled CSF pressure regulation.

Oxidation of nanopores in a silicon membrane: self-limiting formation of sub-10 nm circular openings.

We describe a simple but reliable approach to shrink silicon nanopores with nanometer precision for potential high throughput biomolecular sensing and parallel DNA sequencing. Here, nanopore arrays on silicon membranes were fabricated by a self-limiting shrinkage of inverted pyramidal pores using dry thermal oxidation at 850 °C. The shrinkage rate of the pores with various initial sizes saturated after 4 h of oxidation. In the saturation regime, the shrinkage rate is within ± 2 nm h(-1). Oxidized pores with an average diameter of 32 nm were obtained with perfect circular shape. By careful design of the initial pore size, nanopores with diameters as small as 8 nm have been observed. Statistics of the pore width show that the shrinkage process did not broaden the pore size distribution; in most cases the distribution even decreased slightly. The progression of the oxidation and the deformation of the oxide around the pores were characterized by focused ion beam and electron microscopy. Cross-sectional imaging of the pores suggests that the initial inverted pyramidal geometry is most likely the determining factor for the self-limiting shrinkage.

COVID-19 vaccine uptake among young adults: Influence of asthma and sociodemographic factors.

Background: Asthma was initially described as a risk factor for severe coronavirus disease 2019 (COVID-19), but the uptake of COVID-19 vaccine among young adults with asthma is not well studied. Objective: The aims were to assess COVID-19 vaccine uptake among young adults in general and to explore potential determinants including sociodemographic factors and asthma. Methods: Participants from the population-based birth cohort BAMSE (Barn/Child, Allergy, Milieu, Stockholm, Epidemiology) were included: 4,064 in the study population, 3,064 in a follow-up at age 24 years, and 2,049 in a COVID-19 follow-up (mean age, 26.5 years). Asthma and asthma-associated characteristics were assessed through questionnaires and clinical data. Data on all COVID-19 vaccines registered between January 1, 2021, and February 15, 2023, were extracted from the National Vaccination Register. Results: In the study population (n = 4,064), 53.9% had ≥3 COVID-19 vaccine doses registered. In the 24-year follow-up population (n = 3,064), vaccine uptake differed in relation to education (P < .001). Among the participants with university/college education, 65.7% had an uptake of ≥3 doses of vaccine, compared to 54.1% among the participants with elementary school/high school education. Participants with asthma had decreased odds of receiving ≥3 doses (adjusted odds ratio = 0.62; 95% confidence interval, 0.41-0.92) and ≥2 compared to peers without asthma. Those with uncontrolled disease also had decreased odds of receiving ≥3 doses (adjusted odds ratio = 0.30; 95% confidence interval, 0.13-0.66) and ≥2 compared to participants with controlled asthma. Conclusions: COVID-19 vaccine uptake among young adults is lower in individuals from households with lower socioeconomic status and among those with asthma, including uncontrolled asthma.

Proteome profiling of home-sampled dried blood spots reveals proteins of SARS-CoV-2 infections.

BACKGROUND: Self-sampling of dried blood spots (DBS) offers new routes to gather valuable health-related information from the general population. Yet, the utility of using deep proteome profiling from home-sampled DBS to obtain clinically relevant insights about SARS-CoV-2 infections remains largely unexplored. METHODS: Our study involved 228 individuals from the general Swedish population who used a volumetric DBS sampling device and completed questionnaires at home during spring 2020 and summer 2021. Using multi-analyte COVID-19 serology, we stratified the donors by their response phenotypes, divided them into three study sets, and analyzed 276 proteins by proximity extension assays (PEA). After normalizing the data to account for variances in layman-collected samples, we investigated the association of DBS proteomes with serology and self-reported information. RESULTS: Our three studies display highly consistent variance of protein levels and share associations of proteins with sex (e.g., MMP3) and age (e.g., GDF-15). Studying seropositive (IgG+) and seronegative (IgG-) donors from the first pandemic wave reveals a network of proteins reflecting immunity, inflammation, coagulation, and stress response. A comparison of the early-infection phase (IgM+IgG-) with the post-infection phase (IgM-IgG+) indicates several proteins from the respiratory system. In DBS from the later pandemic wave, we find that levels of a virus receptor on B-cells differ between seropositive (IgG+) and seronegative (IgG-) donors. CONCLUSIONS: Proteome analysis of volumetric self-sampled DBS facilitates precise analysis of clinically relevant proteins, including those secreted into the circulation or found on blood cells, augmenting previous COVID-19 reports with clinical blood collections. Our population surveys support the usefulness of DBS, underscoring the role of timing the sample collection to complement clinical and precision health monitoring initiatives.

The COVID-19 pandemic has posed multiple challenges to healthcare systems. A significant gap that remains is a lack of understanding of the impact of SARS-CoV-2 on individuals who did not seek or require hospitalization. To address this, we distribute self-sampling devices to random citizens, aiming to analyze how blood protein levels are affected in people who have had COVID-19 but had no or mild symptoms. Conducting multiple molecular measurements in dried blood, our study confirms clinically known markers and their relationship to infection stages, even if the donors themselves collect the sample. Our work highlights the potential of combining self-sampling with laboratory methods to provide useful information on human health. This convenient patient-centric sampling approach may potentially be useful when studying other diseases.

Pt-Al2O3 dual layer atomic layer deposition coating in high aspect ratio nanopores.

Functional nanoporous materials are promising for a number of applications ranging from selective biofiltration to fuel cell electrodes. This work reports the functionalization of nanoporous membranes using atomic layer deposition (ALD). ALD is used to conformally deposit platinum (Pt) and aluminum oxide (Al(2)O(3)) on Pt in nanopores to form a metal-insulator stack inside the nanopore. Deposition of these materials inside nanopores allows the addition of extra functionalities to nanoporous materials such as anodic aluminum oxide (AAO) membranes. Conformal deposition of Pt on such materials enables increased performances for electrochemical sensing applications or fuel cell electrodes. An additional conformal Al(2)O(3) layer on such a Pt film forms a metal-insulator-electrolyte system, enabling field effect control of the nanofluidic properties of the membrane. This opens novel possibilities in electrically controlled biofiltration. In this work, the deposition of these two materials on AAO membranes is investigated theoretically and experimentally. Successful process parameters are proposed for a reliable and cost-effective conformal deposition on high aspect ratio three-dimensional nanostructures. A device consisting of a silicon chip supporting an AAO membrane of 6 mm diameter and 1.3 µm thickness with 80 nm diameter pores is fabricated. The pore diameter is reduced to 40 nm by a conformal deposition of 11 nm Pt and 9 nm Al(2)O(3) using ALD.

Rapid On-Site Evaluation (ROSE): A Microfluidic Approach.

Rapid on-site evaluation (ROSE) increases the diagnostic accuracy of fine-needle aspiration (FNA) samples from cysts, a sack-like fluid-containing tissue that sometimes can be precancerous, but is highly dependent on the skills and availability of cytopathologists. We present a semiautomated sample preparation device for ROSE. The device consists of a smearing tool and a capillary-driven chamber that allow smearing and staining of an FNA sample in a single platform. Here, we show the capability of the device to prepare samples for ROSE, using a human pancreatic cancer cell line (PANC-1) and liver, lymph node, and thyroid FNA model samples. Using microfluidics, the device reduces the equipment needed in an operating room for FNA sample preparation, which may lead to a wider implementation of ROSE in healthcare centers.

Determination of lithium concentration in capillary blood using volumetric dried blood spots.

BACKGROUND: Lithium is a cornerstone in the treatment of bipolar disorder and is considered one of the most effective treatments in psychiatry at large. Lithium treatment requires individual dosing with frequent serum concentration measurements due to the narrow therapeutic window and risk of toxicity. There is need for patient-centric methods for lithium monitoring and the use of dried blood spots has recently been proposed for determination of lithium concentration. The purpose of the current study was to assess feasibility of this method by introducing a volumetric technique developed for home-sampling. MATERIALS AND METHODS: Laboratory: Capillary blood was sampled by finger-prick using a volumetric device that collects 10 µL volumes as a dried blood spot. Lithium was measured in the dried blood spots using a validated atomic absorption spectroscopy method. CLINICAL: Thirty-nine lithium-treated patients were recruited, and dried blood spots and venous blood samples were collected. Routine serum analysis was performed for comparison. RESULTS: The range of serum lithium concentrations was 0.41-1.22 mmol/L, and the dried blood spot/serum ratio was 0.78. A strong linear correlation between the two specimens was shown with Pearson's R = 0.95 (r2 = 0.90). Adding hematocrit as a variable only minimally improved prediction. CONCLUSION: Volumetric dried blood spots is a promising technique for measurement of lithium concentrations. This will enable home-sampling and could potentially save resources, improve compliance, and make treatment safer. This may facilitate the use of lithium treatment in regions where monitoring via venous blood sampling remains difficult. However, the usability of dried blood spots for monitoring lithium treatment longitudinally remains to be examined.

Microneedle Patch for Painless Intradermal Collection of Interstitial Fluid Enabling Multianalyte Measurement of Small Molecules, SARS-CoV-2 Antibodies, and Protein Profiling.

Blood sampling is a common practice to monitor health, but it entails a series of drawbacks for patients including pain and discomfort. Thus, there is a demand for more convenient ways to obtain samples. Modern analytical techniques enable monitoring of multiple bioanalytes in smaller samples, opening possibilities for new matrices, and microsampling technologies to be adopted. Interstitial fluid (ISF) is an attractive alternative matrix that shows good correlation with plasma concentration dynamics for several analytes and can be sampled in a minimally invasive and painless manner from the skin at the point-of-care. However, there is currently a lack of sampling devices compatible with clinical translation. Here, to tackle state-of-the-art limitations, a cost-effective and compact single-microneedle-based device designed to painlessly collect precisely 1.1 µL of dermal ISF within minutes is presented. The fluid is volume-metered, dried, and stably stored into analytical-grade paper within the microfluidic device. The obtained sample can be mailed to a laboratory, quantitatively analyzed, and provide molecular insights comparable to blood testing. In a human study, the possibility to monitor various classes of molecular analytes is demonstrated in ISF microsamples, including caffeine, hundreds of proteins, and SARS-CoV-2 antibodies, some being detected in ISF for the first time.

Blood cell quantification on dry blood samples: toward patient-centric complete blood counts.

Background: Performing complete blood counts from patients' homes could have a transformative impact on e-based healthcare. Blood microsampling and sample drying are enabling elements for patient-centric healthcare. The aim of this study was to investigate the potential of dry blood samples for image-based cell quantification of red and white blood cells. Methods: A manual sample preparation method was developed and tested for image-based red and white blood cell counting. Results & conclusion: Dry blood samples enable image-based cell counting of red and white blood cells with a good correlation to gold standard hematology analyzer data (average coefficient of variation <6.5%; R2 >0.8) and resolve the basic morphology of white blood cell nuclei. The presented proof-of-principle study is a first step toward patient-centric complete blood counts.

Semi-automated preparation of fine-needle aspiration samples for rapid on-site evaluation.

Rapid on-site evaluation (ROSE) significantly improves the diagnostic yield of fine needle aspiration (FNA) samples but critically depends on the skills and availability of cytopathologists. Here, we introduce a portable device for semi-automated sample preparation for ROSE. In a single platform, the device combines a smearing tool and a capillary-driven chamber for staining FNA samples. Using a human pancreatic cancer cell line (PANC-1) and liver, lymph node, and thyroid FNA model samples, we demonstrate the capability of the device to prepare samples for ROSE. By minimizing the equipment needed in the operating room, the device may simplify the performance of FNA sample preparation and lead to a wider implementation of ROSE.

Oral delivery of systemic monoclonal antibodies, peptides and small molecules using gastric auto-injectors.

Oral administration provides a simple and non-invasive approach for drug delivery. However, due to poor absorption and swift enzymatic degradation in the gastrointestinal tract, a wide range of molecules must be parenterally injected to attain required doses and pharmacokinetics. Here we present an orally dosed liquid auto-injector capable of delivering up to 4-mg doses of a bioavailable drug with the rapid pharmacokinetics of an injection, reaching an absolute bioavailability of up to 80% and a maximum plasma drug concentration within 30 min after dosing. This approach improves dosing efficiencies and pharmacokinetics an order of magnitude over our previously designed injector capsules and up to two orders of magnitude over clinically available and preclinical chemical permeation enhancement technologies. We administered the capsules to swine for delivery of clinically relevant doses of four commonly injected medications, including adalimumab, a GLP-1 analog, recombinant human insulin and epinephrine. These multi-day dosing experiments and oral administration in awake animal models support the translational potential of the system.