ABSTRACT
The presence of harmful substances such as dyes in water systems poses a direct threat to the quality of people's lives and other organisms living in the ecosystem. Orange G (OG) is considered a hazardous dye. The existing paper attempts to evaluate a low-cost adsorbent for the effective removal of OG dye. The developed adsorbent Polyaniline@Hydroxyapatite extracted from Cilus Gilberti fish Scale (PANI@FHAP) was elaborated through the application of the in situ chemical polymerization method to incorporate PANI on the surface of naturally extracted hydroxyapatite FHAP. The good synthesis of PANI@FHAP was evaluated through multiple techniques including X-ray diffraction (XRD), Scanning electron microscopy coupled with energy dispersive X-ray spectrometry (SEM/EDS), Fourier Transforms Infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA) coupled with thermal differential analysis (DTA) analysis. The results reveal a highly ordered disposition of PANI chains on FHAP, resulting in a well-coated FHAP in the PANI matrix. Furthermore, the presence of functional groups on the surface of PANI such as amine (-NH2) and imine (=NH) groups would facilitate the removal of OG dye from contaminated water. The adsorption of OG onto PANI@FHAP was conducted in batch mode and optimized through response surface methodology coupled with box-Behnken design (RSM/BBD) to investigate the effect of time, adsorbent dose, and initial concentration. The outcomes proved that OG adsorption follows a quadratic model (R2 = 0.989). The kinetic study revealed that the adsorption of OG fits the pseudo-second-order model. On the other hand, the isotherm study declared that the Freundlich model is best suited to the description of OG adsorption. For thermodynamic study, the adsorption of OG is spontaneous in nature and exothermic. Furthermore, the regeneration-reusability study indicates that PANI@FHAP could be regenerated and reused up to five successive cycles. Based on the FTIR spectrum of PANI@FHAP after OG adsorption, the mechanism governing OG adsorption is predominantly driven by π-π interaction, electrostatic interaction, and hydrogen bonding interactions. The obtained results suppose that PANI@FHAP adsorbent can be a competitive material in large-scale applications.
Subject(s)
Aniline Compounds , Durapatite , Wastewater , Water Pollutants, Chemical , Aniline Compounds/chemistry , Durapatite/chemistry , Adsorption , Water Pollutants, Chemical/chemistry , Water Pollutants, Chemical/analysis , Wastewater/chemistry , Coloring Agents/chemistry , Azo Compounds/chemistry , Benzenesulfonates/chemistry , Animals , Animal Scales/chemistry , Water Purification/methods , Kinetics , Waste Disposal, Fluid/methodsABSTRACT
The use of fish waste as a source material for the development of functional beads has significant potential applications in the fields of materials science and environmental sustainability. In this study, a biomaterial bead of chitosan was cross-linked with bio-hydroxyapatite (Bio-Hap/Cs) through the encapsulation process to create a stable and durable material. The beads are characterized using scanning electron microscopy combined with energy dispersive X-ray spectrometry, Fourier transform infrared spectroscopy, and X-ray diffraction techniques. The adsorption efficiency of Bio-Hap/Cs hydrogel beads was evaluated by using Orange G (OG) dye in both batch and recirculating column systems, and the effect of various parameters on the adsorption capacity was investigated. In the batch study, it was found that OG removal increased with an increasing pH and adsorbent dose. However, in the recirculating column system, a higher bed height and lower flow rate led to increased removal of the OG dye. The kinetic study indicated that the pseudo-second-order model provided a good description of OG adsorption onto Bio-Hap/Cs beads in both batch and recirculating processes, with a high coefficient correlation. The maximum adsorbed amounts are found to be 19.944 mg g-1 and 9.472 mg g-1 in batch and recirculating processes, respectively. Therefore, Bio-Hap/Cs hydrogel beads have demonstrated an effective and reusable material for OG dye remediation from aqueous solutions using recirculating adsorption processes.
ABSTRACT
Recognizing and assessing environmental risk are key components of every industry management strategy. Projects need to make sure that a detailed environmental risk management strategy is applied by methodically recognizing and addressing threats from internal and external influences to comply with regulatory standards for environmental preservation and safeguarding. This study's goal is to use a novel technique to assess the impact of environmental risks related to the use of evaporation ponds as final basins for industrial effluents. It employs qualitative and statistical methodologies to identify areas where engineering and managerial safeguards' structure, functioning, and lines of defense have flaws that might result in an ecologically hazardous occurrence. Additionally, it will offer a risk evaluation based on the gravity of the impact and the likelihood that the environmental occurrence would happen by using evaporation ponds to store industrial effluents. While the environmental threat would be entirely removed, it must be capable of reducing it to ALARP. The environmental risk assessment matrix will serve as a key factor in determining whether the environmental risk level linked with an evaporation pond is acceptable, as determined by the likelihood and impacts. The result of this research allows industrial units to recognize and control potential environmental risks associated with effluents by practically implementing a new environmental risk matrix based on several environmental and ecological effects with probability factors.â¢This study aims to assist industrial operators, especially power plants, manage environmental risk by combining ALARP concepts with other factors to evaluate risk acceptance and tolerance levels.â¢The Physico-chemical characteristics of effluent collected in the evaporation pond reveal that evaporation has a deleterious impact on such industrial effluent, as evidenced by a large increase in various effluent properties, some of which exceed the limit values.â¢A risk evaluation found that effluent collected in the evaporation pond has a detrimental negative impact on industrial effluents. This was evidenced by a significant rise in associated activities. This could increase the expense of operating and managing evaporation ponds, which could harm the ecosystem.
ABSTRACT
The engineering of a novel biocomposite based on Cerastoderma edule shells doped with copper and alginate (Ce-Cu@Alg) forming hydrogel beads was used for batch and dynamic adsorption thiabendazole (TBZ) pesticide from water. The prepared biosorbent was analyzed by various characterization techniques such as scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), Brunauer-Emmett-Teller analysis (BET), and energy dispersive spectroscopy (EDS), thermogravimetric and differential analysis (TGA-DTA). The results of the TBZ batch biosorption by Ce-Cu@Alg composite showed that the Langmuir model was the most adequate to describe the adsorption process, with a maximum adsorption capacity value of 21.98 mg/g. Moreover, the adsorption kinetics were adjusted by the pseudo-second-order model. The optimal conditions determined by the RSM approach coupled with the CCD design were 100 ppm of initial TBZ concentration, a Ce-Cu@Alg beads dose of 6 g/L and a contact time of 180 min for maximum removal of 83.42%. On the other hand, the TBZ sorption on a fixed bed of Ce-Cu@Alg beads was effective at high column height, low effluent flow and low solution concentration. The Thomas model was best fitted to the kinetic data. This study shows the possibility of using this new hybrid biocomposite in the industrial sector to treat large effluent volumes.
Subject(s)
Cardiidae , Fungicides, Industrial , Water Pollutants, Chemical , Animals , Alginates/chemistry , Copper/chemistry , Hydrogels/chemistry , Fungicides, Industrial/analysis , Water Pollutants, Chemical/analysis , Hydrogen-Ion Concentration , Adsorption , Water/chemistry , Kinetics , Spectroscopy, Fourier Transform InfraredABSTRACT
BACKGROUND: Carbendazim is a fungicide which can seep into the water supply, presenting a public health risk, and therefore the accurate trace determination of this substance is very important. OBJECTIVE: The purpose of the study is to take a top-down analytical validation approach in order to determine the amount of carbendazim in drinking water by using an SPE-LC-MS/MS technique. METHODS: Quantification of carbendazim using solid-phase extraction coupled with LC-MS/MS was used in order to ensure the accuracy of the analytical method and to control the risk of its routine application. An overall validation methodology based on two-sided tolerance interval type ß-content, γ-confidence has been applied for the validation and estimation of uncertainty by building a decision graphical tool called the "uncertainty profile" by using the statistical process known as the Satterthwaite approximation with no recourse to additional data by satisfying intermediate precision condition for each concentration level within the acceptance limits fixed in advance. RESULTS: The process of validation is based on the selection of a linear weighted 1/X model enabling validation of the carbendazim dosage using LC-MS/MS in the range of working concentrations as the ßγ-CCTI fell inside acceptable limits of ±10%, and the relative expanded uncertainty did not surpass 7% regardless of the ß values (66.7, 80, and 90%) and the 1- γ = risk (10 and 5%). CONCLUSION: The application of the uncertainty profile approach for full validation of a SPE-LC-MS/MS assay for the quantification of carbendazim has been successfully achieved. HIGHLIGHTS: Implementation of a full validation strategy based on validation and measurement uncertainty with no additional effort using data from analytical validation under intermediate precision conditions at each level of concentration for carbendazim quantification in drinking water using SPE-LC-MS/MS. So we have shown the flexibility of this approach for carbendazim assay by LC-MS/MS. Indeed, It provides an efficient decision-making tool that allows selection and modification of ß-content and γ-confidence values.
Subject(s)
Drinking Water , Chromatography, Liquid/methods , Uncertainty , Tandem Mass Spectrometry/methods , Solid Phase Extraction/methodsABSTRACT
In this paper, Cellana tramoserica (CT) shells were modified by copper and used as an adsorbent to remove thiabendazole (TBZ) from aqueous media. The removal efficiency of TBZ onto CT shells and modified Cellana tramoserica (CT-Cu) shells was investigated by considering the following parameters: initial pesticide concentration, solution pH, agitation time, temperature, and adsorbent mass. The experimental results show that the pseudo-first-order and Langmuir models well describe the adsorption process. The maximum adsorption amount for CT and CT-Cu is 319.68 mg/g and 376.12 mg/g, respectively. CT-Cu showed higher TBZ removal efficiency than CT, explained by the ligand exchange between the water and the pesticide molecules in the metal coordination sphere. Response surface methodology combined with central composite design (RSM-CCD) was used to optimize the adsorption conditions. Optimized values were obtained at 5 for pH, 50 ppm, 120 min, and 20 mg of CT-Cu adsorbent. Under these optimal conditions, 91% of TBZ was removed by adsorption onto CT-Cu. Graphical abstract.