Data harvesting from fields of spindles.

The mitotic spindle is essential for chromosome segregation and must be large enough to accommodate all of the chromatin in the dividing cell. In this issue, Dinarina et al. (2009) grow "fields" of spindles on coverslips to investigate the relationship between chromatin and spindle size as well as intrinsic mechanisms of spindle assembly.

Protein architecture of the human kinetochore microtubule attachment site.

Chromosome segregation requires assembly of kinetochores on centromeric chromatin to mediate interactions with spindle microtubules and control cell-cycle progression. To elucidate the protein architecture of human kinetochores, we developed a two-color fluorescence light microscopy method that measures average label separation, Delta, at <5 nm accuracy. Delta analysis of 16 proteins representing core structural complexes spanning the centromeric chromatin-microtubule interface, when correlated with mechanical states of spindle-attached kinetochores, provided a nanometer-scale map of protein position and mechanical properties of protein linkages. Treatment with taxol, which suppresses microtubule dynamics and activates the spindle checkpoint, revealed a specific switch in kinetochore architecture. Cumulatively, Delta analysis revealed that compliant linkages are restricted to the proximity of chromatin, suggested a model for how the KMN (KNL1/Mis12 complex/Ndc80 complex) network provides microtubule attachment and generates pulling forces from depolymerization, and identified an intrakinetochore molecular switch that may function in controlling checkpoint activity.

The KMN protein network--chief conductors of the kinetochore orchestra.

Successful completion of mitosis requires that sister kinetochores become attached end-on to the plus ends of spindle microtubules (MTs) in prometaphase, thereby forming kinetochore microtubules (kMTs) that tether one sister to one spindle pole and the other sister to the opposite pole. Sites for kMT attachment provide at least four key functions: robust and dynamic kMT anchorage; force generation that can be coupled to kMT plus-end dynamics; correction of errors in kMT attachment; and control of the spindle assembly checkpoint (SAC). The SAC typically delays anaphase until chromosomes achieve metaphase alignment with each sister kinetochore acquiring a full complement of kMTs. Although it has been known for over 30 years that MT motor proteins reside at kinetochores, a highly conserved network of protein complexes, called the KMN network, has emerged in recent years as the primary interface between the kinetochore and kMTs. This Commentary will summarize recent advances in our understanding of the role of the KMN network for the key kinetochore functions, with a focus on human cells.

Esperanto for histones: CENP-A, not CenH3, is the centromeric histone H3 variant.

The first centromeric protein identified in any species was CENP-A, a divergent member of the histone H3 family that was recognised by autoantibodies from patients with scleroderma-spectrum disease. It has recently been suggested to rename this protein CenH3. Here, we argue that the original name should be maintained both because it is the basis of a long established nomenclature for centromere proteins and because it avoids confusion due to the presence of canonical histone H3 at centromeres.

Welcome to a new kind of tension: translating kinetochore mechanics into a wait-anaphase signal.

Recent high-resolution studies of kinetochore structure have transformed the way researchers think about this crucial macro-molecular complex, which is essential for ensuring chromosome segregation occurs faithfully during cell division. Kinetochores mediate the interaction between chromosomes and the plus-ends of dynamic spindle microtubules and control the timing of anaphase onset by regulating the spindle assembly checkpoint (SAC). There is much debate in the SAC research community as to whether mitotic cells sense only microtubule attachment at the kinetochore, or both attachment and tension, before committing to anaphase. In this Commentary, we present a brief history of the tension-versus-attachment debate, summarize recent advances in our understanding of kinetochore structure and focus on the implications of a phenomenon known as intrakinetochore stretch for SAC regulation. We also hypothesize how intrakinetochore stretch might impact SAC function by regulating both microtubule attachment stability and the localization and activity of checkpoint components at the kinetochore.

Pericentric chromatin is organized into an intramolecular loop in mitosis.

BACKGROUND: Cohesin proteins link sister chromatids and provide the basis for tension between bioriented sister chomatids in mitosis. Cohesin is concentrated at the centromere region of the chromosome despite the fact that sister centromeres can be separated by 800 nm in vivo. The function of cohesin at sites of separated DNA is unknown. RESULTS: We provide evidence that the kinetochore promotes the organization of pericentric chromatin into a cruciform in mitosis such that centromere-flanking DNA adopts an intramolecular loop, whereas sister-chromatid arms are paired intermolecularly. Visualization of cohesin subunits by fluorescence microscopy revealed a cylindrical structure that encircles the central spindle and spans the distance between sister kinetochores. Kinetochore assembly at the apex of the loop initiates intrastrand loop formation that extends approximately 25 kb (12.5 kb on either side of the centromere). Two centromere loops (one from each sister chromatid) are stretched between the ends of sister-kinetochore microtubules along the spindle axis. At the base of the loop there is a transition to intermolecular sister-chromatid pairing. CONCLUSIONS: The C loop conformation reveals the structural basis for sister-kinetochore clustering in budding yeast and for kinetochore biorientation and thus resolves the paradox of maximal interstrand separation in regions of highest cohesin concentration.

Mitosis: a history of division.

Mitosis has been studied since the early 1880s, to the extent that we now have a detailed, but still incomplete, description of spindle dynamics and mechanics, a sense of potential mechanochemical and regulatory mechanisms at a molecular level, and a long list of mitotic proteins. Here we present a personal view of how far we have come, and where we need to go to fully understand the mechanisms involved in mitosis.

The polarity and dynamics of microtubule assembly in the budding yeast Saccharomyces cerevisiae.

Microtubule assembly in Saccharomyces cerevisiae is initiated from sites within spindle pole bodies (SPBs) in the nuclear envelope. Microtubule plus ends are thought to be organized distal to the SPBs, while minus ends are proximal. Several hypotheses for the function of microtubule motor proteins in force generation and regulation of microtubule assembly propose that assembly and disassembly occur at minus ends as well as at plus ends. Here we analyse microtubule assembly relative to the SPBs in haploid yeast cells expressing green fluorescent protein fused to alpha-tubulin, a microtubule subunit. Throughout the cell cycle, analysis of fluorescent speckle marks on cytoplasmic astral microtubules reveals that there is no detectable assembly or disassembly at minus ends. After laser-photobleaching, metaphase spindles recover about 63% of the bleached fluorescence, with a half-life of about 1 minute. After anaphase onset, photobleached marks in the interpolar spindle are persistent and do not move relative to the SPBs. In late anaphase, the elongated spindles disassemble at the microtubule plus ends. These results show for astral and anaphase interpolar spindle microtubules, and possibly for metaphase spindle microtubules, that microtubule assembly and disassembly occur at plus, and not minus, ends.

Microtubule growth activates Rac1 to promote lamellipodial protrusion in fibroblasts.

Microtubules are involved in actin-based protrusion at the leading-edge lamellipodia of migrating fibroblasts. Here we show that the growth of microtubules induced in fibroblasts by removal of the microtubule destabilizer nocodazole activates Rac1 GTPase, leading to the polymerization of actin in lamellipodial protrusions. Lamellipodial protrusions are also activated by the rapid growth of a disorganized array of very short microtubules induced by the microtubule-stabilizing drug taxol. Thus, neither microtubule shortening nor long-range microtubule-based intracellular transport is required for activating protrusion. We suggest that the growth phase of microtubule dynamic instability at leading-edge lamellipodia locally activates Rac1 to drive actin polymerization and lamellipodial protrusion required for cell migration.

Nuclear congression is driven by cytoplasmic microtubule plus end interactions in S. cerevisiae.

Nuclear movement before karyogamy in eukaryotes is known as pronuclear migration or as nuclear congression in Saccharomyces cerevisiae. In this study, S. cerevisiae is used as a model system to study microtubule (MT)-dependent nuclear movements during mating. We find that nuclear congression occurs through the interaction of MT plus ends rather than sliding and extensive MT overlap. Furthermore, the orientation and attachment of MTs to the shmoo tip before cell wall breakdown is not required for nuclear congression. The MT plus end-binding proteins Kar3p, a class 14 COOH-terminal kinesin, and Bik1p, the CLIP-170 orthologue, localize to plus ends in the shmoo tip and initiate MT interactions and depolymerization after cell wall breakdown. These data support a model in which nuclear congression in budding yeast occurs by plus end MT capture and depolymerization, generating forces sufficient to move nuclei through the cytoplasm. This is the first evidence that MT plus end interactions from oppositely oriented organizing centers can provide the force for organelle transport in vivo.

Kinesin 5-independent poleward flux of kinetochore microtubules in PtK1 cells.

Forces in the spindle that align and segregate chromosomes produce a steady poleward flux of kinetochore microtubules (MTs [kMTs]) in higher eukaryotes. In several nonmammalian systems, flux is driven by the tetrameric kinesin Eg5 (kinesin 5), which slides antiparallel MTs toward their minus ends. However, we find that the inhibition of kinesin 5 in mammalian cultured cells (PtK1) results in only minor reduction in the rate of kMT flux from approximately 0.7 to approximately 0.5 microm/min, the same rate measured in monopolar spindles that lack antiparallel MTs. These data reveal that the majority of poleward flux of kMTs in these cells is not driven by Eg5. Instead, we favor a polar "pulling-in" mechanism in which a depolymerase localized at kinetochore fiber minus ends makes a major contribution to poleward flux. One candidate, Kif2a (kinesin 13), was detected at minus ends of fluxing kinetochore fibers. Kif2a remains associated with the ends of K fibers upon disruption of the spindle by dynein/dynactin inhibition, and these K fibers flux.

Determining the position of the cell division plane.

Proper positioning of the cell division plane during mitosis is essential for determining the size and position of the two daughter cells--a critical step during development and cell differentiation. A bipolar microtubule array has been proposed to be a minimum requirement for furrow positioning in mammalian cells, with furrows forming at the site of microtubule plus-end overlap between the spindle poles. Observations in other species have suggested, however, that this may not be true. Here we show, by inducing mammalian tissue cells with monopolar spindles to enter anaphase, that furrow formation in cultured mammalian cells does not require a bipolar spindle. Unexpectedly, cytokinesis occurs at high frequency in monopolar cells. Division always occurs at a cortical position distal to the chromosomes. Analysis of microtubules during cytokinesis in cells with monopolar and bipolar spindles shows that a subpopulation of stable microtubules extends past chromosomes and binds to the cell cortex at the site of furrow formation. Our data are consistent with a model in which chromosomes supply microtubules with factors that promote microtubule stability and furrowing.

Aurora kinase promotes turnover of kinetochore microtubules to reduce chromosome segregation errors.

Merotelic kinetochore orientation is a misattachment in which a single kinetochore binds microtubules from both spindle poles rather than just one and can produce anaphase lagging chromosomes, a major source of aneuploidy. Merotelic kinetochore orientation occurs frequently in early mitosis, does not block chromosome alignment at the metaphase plate, and is not detected by the spindle checkpoint. However, microtubules to the incorrect pole are usually significantly reduced or eliminated before anaphase. We discovered that the frequency of lagging chromosomes in anaphase is very sensitive to partial inhibition of Aurora kinase activity by ZM447439 at a dose, 3 microM, that has little effect on histone phosphorylation, metaphase chromosome alignment, and cytokinesis in PtK1 cells. Partial Aurora kinase inhibition increased the frequency of merotelic kinetochores in late metaphase, and the fraction of microtubules to the incorrect pole. Measurements of fluorescence dissipation after photoactivation showed that kinetochore-microtubule turnover in prometaphase is substantially suppressed by partial Aurora kinase inhibition. Our results support a preanaphase correction mechanism for merotelic attachments in which correct plus-end attachments are pulled away from high concentrations of Aurora B at the inner centromere, and incorrect merotelic attachments are destabilized by being pulled toward the inner centromere.

VE-DIC light microscopy and the discovery of kinesin.

Major advances in science are often tightly coupled with the development of new technology. The discovery of kinesin is an excellent example of this principle. The new technology was video-enhanced differential interference contrast light microscopy, which provided the enormous gain in image contrast needed to detect and measure kinesin-based motility in living cells, cell extracts and in vitro motility assays.

The vertebrate cell kinetochore and its roles during mitosis.

A replicated chromosome possesses two discrete, complex, dynamic, macromolecular assemblies, known as kinetochores, that are positioned on opposite sides of the primary constriction of the chromosome. Here, the authors review how kinetochores control chromosome segregation during mitosis in vertebrates. They attach the chromosome to the opposing spindle poles by trapping the dynamic plus-ends of microtubules growing from the poles. They then produce much of the force for chromosome poleward motion, regulate when this force is applied, and act as a site for microtubule assembly and disassembly. Finally, they control the metaphase-anaphase transition by inhibiting chromatid separation until the chromatids are properly attached.

Pressure-induced depolymerization of spindle microtubules. II. Thermodynamics of in vivo spindle assembly.

The present experiments were designed to test whether the simple equilibrium assembly model proposed by Inoué could predict variations in spindle microtubule assembly in response to changes in hydrostatic pressure as it does for changes in temperature. The results were also analyzed according to a model based on nucleated condensation polymerization since this recently appears to be the mechanism by which purified brain microtubules are assembled in vitro. Equilibrium birefringence (BR) of the meiotic metaphase-arrested spindle was measured in vivo as a function of hydrostatic pressure and temperature in Chaetopterus oocytes using a miniature microscope pressure chamber. Increasing pressure in steps to 3,000 psi at temperatures below 22 degrees C did produce decreases in spindle equilibrium BR predictable directly from the simple equilibrium model of spindle assembly. Thermodynamic analysis of the pressure data yielded a value of delta V congruent to 400 ml/mol of polymerizing unit. Theoretical curves based on the nucleated condensation model can also be made to fit the data, but semilog plots of the dependence of the equilibrium constant versus pressure and versus reciprocal temperature are biphasic, suggesting that either the size of the polymerizing unit changes or more than one equilibrium constant governs the assembly reaction. That the same value of delta V, 90 ml/mol, was estimated from both the majority of the spindle BR data and data for the assembly of neural microtubules in vitro supports the possibility that spindle microtubules are assembled by a nucleated condensation mechanism.

Pressure-induced depolymerization of spindle microtubules. I. Changes in birefringence and spindle length.

Changes in birefringence retardation (BR) and length of Chaetopterus meiotic metaphase-arrested spindles produced by increased hydrostatic pressure were observed with polarized-light microscopy using a newly developed optical pressure chamber. Increased pressure produced rapid, reversible decreases in spindle BR and length. Pressures of 3,500 psi or higher at 22 degrees C caused complete disappearance of spindle BR within 3 min. Up to 6,000 psi, the rates of both BR decay and spindle shortening increased progressively with increasing pressure. At 6,000 psi or above, the BR decreased rapidly but there was no evidence of spindle shortening. The general observations are consistent with results of earlier classical experiments on effects of pressure on mitosis, and with experiments that used colchicine or low temperature as microtubule-depolymerizing agents. The kinetics of spindle depolymerization and repolymerization showed two phases: an initial phase of rapid decreases or increase in half-spindle microtubule BR; and a second phase of nearly constant BR during which most of the spindle shortening or growth occurs. BR is assumed to be directly related to the number of microtubules in a spindle cross section. It is hypothesized that microtubules in the spindle have different stabilities depending on the attachment of nonattachment of their ends. This hypothesis is used to explain the two phases of spindle depolymerization and repolymerization as well as several other observations.

Analysis of the treadmilling model during metaphase of mitosis using fluorescence redistribution after photobleaching.

One recent hypothesis for the mechanism of chromosome movement during mitosis predicts that a continual, uniform, poleward flow or "treadmilling" of microtubules occurs within the half-spindle between the chromosomes and the poles during mitosis (Margolis, R. L., and L. Wilson, 1981, Nature (Lond.), 293:705-711). We have tested this treadmilling hypothesis using fluorescent analog cytochemistry and measurements of fluorescence redistribution after photobleaching to examine microtubule behavior during metaphase of mitosis. Mitotic BSC 1 mammalian tissue culture cells or newt lung epithelial cells were microinjected with brain tubulin labeled with 5-(4,6-dichlorotriazin-2-yl) amino fluorescein (DTAF) to provide a fluorescent tracer of the endogenous tubulin pool. Using a laser microbeam, fluorescence in the half-spindle was photobleached in either a narrow 1.6 micron wide bar pattern across the half-spingle or in a circular area of 2.8 or 4.5 micron diameter. Fluorescence recovery in the spindle fibers, measured using video microscopy or photometric techniques, occurs as bleached DTAF-tubulin subunits within the microtubules are exchanged for unbleached DTAF-tubulin in the cytosol by steady-state microtubule assembly-disassembly pathways. Recovery of 75% of the bleached fluorescence follows first-order kinetics and has an average half-time of 37 sec, at 31-33 degrees C. No translocation of the bleached bar region could be detected during fluorescence recovery, and the rate of recovery was independent of the size of the bleached spot. These results reveal that, for 75% of the half-spindle microtubules, FRAP does not occur by a synchronous treadmilling mechanism.

Real-time observations of microtubule dynamic instability in living cells.

Individual microtubule dynamics were observed in real time in primary cultures of newt lung epithelium using video-enhanced differential interference contrast microscopy and digital image processing. The linear filaments observed in cells corresponded to microtubules based on three criteria: (a) small particles translocated along them; (b) the majority of them disappeared after incubation in nocodazole; (c) and the distribution observed by differential interference contrast correlated with anti-tubulin immunofluorescence staining of the same cell. Microtubules were most clearly observed at the leading edge of cells located at the periphery of the epithelial sheet. Microtubules exhibited dynamic instability behavior: individual microtubules existed in persistent phases of elongation or rapid shortening. Microtubules elongated at a velocity of 7.2 micron/min +/- 0.3 SEM (n = 42) and rapidly shortened at a velocity of 17.3 micron/min +/- 0.7 SEM (n = 35). The transitions between elongation and rapid shortening occurred abruptly and stochastically with a transition frequency of 0.014 s-1 for catastrophe and 0.044 s-1 for rescue. Approximately 70% of the rapidly shortening microtubules were rescued and resumed elongation within the 35 x 35 micron microscopic field. A portion of the microtubule population appeared differentially stable and did not display any measurable elongation or shortening during 10-15-min observations.

Dynamics of microtubule depolymerization in monocytes.

Human monocytes, which contain few interphase microtubules (35.+/- 7.7), were used to study the dynamics of microtubule depolymerization. Steady-state microtubule assembly was abruptly blocked with either high concentrations of nocodazole (10 micrograms/ml) or exposure to cold temperature (3 degrees C). At various times after inhibition of assembly, cells were processed for anti-tubulin immunofluorescence microscopy. Stained cells were observed with an intensified video camera attached to the fluorescence microscope. A tracing of the entire length of each individual microtubule was made from the image on the television monitor by focusing up and down through the cell. The tracings were then digitized into a computer. All microtubules were seen to originate from the centrosome, with an average length in control cells of 7.1 +/- 2.7 microns (n = 957 microtubules). During depolymerization, the total microtubule polymer and the number of microtubules per cell decreased rapidly. In contrast, there was a slow decrease in the average length of the persisting microtubules. The half-time for both the loss of total microtubule polymer and microtubule number per cell was approximately 40 s for nocodazole-treated cells. The rate-limiting step in the depolymerization process was the rate of initiation of disassembly. Once initiated, depolymerization appeared catastrophic. Further kinetic analysis revealed two classes of microtubules: 70% of the microtubule population was very labile and initiated depolymerization at a rate approximately 23 times faster than a minor population of persistent microtubules. Cold treatment yielded qualitatively similar characteristics of depolymerization, but the initiation rates were slower. In both cases there was a significant asynchrony and heterogeneity in the initiation of depolymerization among the population of microtubules.