ABSTRACT
Sodium/potassium-ion batteries (NIBs and KIBs) are considered the most promising candidates for lithium-ion batteries in energy storage fields. Tin sulfide (SnS2) is regarded as an attractive negative candidate for NIBs and KIBs thanks to its superior power density, high-rate performance and natural richness. Nevertheless, the slow dynamics, the enormous volume change and the decomposition of polysulfide intermediates limit its practical application. Herein, microcubes SnS2 were prepared through sacrificial MnCO3 template-assisted and a facile solvothermal reaction strategy and their performance was investigated in Na and K-based cells. The unique hollow cubic structure and well-confined SnS2 nanosheets play an important role in Na+/K+ rapid kinetic and alleviating volume change. The effect of the carbon additives (Super P/C65) on the electrochemical properties were investigated thoroughly. The in operando and ex-situ characterization provide a piece of direct evidence to clarify the storage mechanism of such conversion-alloying type negative electrode materials.
ABSTRACT
Herein, the electrochemical properties and reaction mechanism of Li3-2 x Cax V2 (PO4 )3 /C (x = 0, 0.5, 1, and 1.5) as negative electrode materials for sodium-ion/potassium-ion batteries (SIBs/PIBs) are investigated. All samples undergo a mixed contribution of diffusion-controlled and pseudocapacitive-type processes in SIBs and PIBs via Trasatti Differentiation Method, while the latter increases with Ca content increase. Among them, Li3 V2 (PO4 )3 /C exhibits the highest reversible capacity in SIBs and PIBs, while Ca1.5 V2 (PO4 )3 /C shows the best rate performance with a capacity retention of 46% at 20 C in SIBs and 47% at 10 C in PIBs. This study demonstrates that the specific capacity of this type of material in SIBs and PIBs does not increase with the Ca-content as previously observed in lithium-ion system, but the stability and performance at a high C-rate can be improved by replacing Li+ with Ca2+ . This indicates that the insertion of different monovalent cations (Na+ /K+ ) can strongly influence the redox reaction and structure evolution of the host materials, due to the larger ion size of Na+ and K+ and their different kinetic properties with respect to Li+ . Furthermore, the working mechanism of both LVP/C and Ca1.5 V2 (PO4 )3 /C in SIBs are elucidated via in operando synchrotron diffraction and in operando X-ray absorption spectroscopy.
ABSTRACT
Orthorhombic V2O5 nanowires were successfully synthesized via a hydrothermal method. A cell-configuration system was built utilizing V2O5 as the cathode and 1 M Mg(ClO4)2 electrolyte within acetonitrile, together with Mg xMo6S8 ( x ≈ 2) as the anode to investigate the structural evolution and oxidation state and local structural changes of V2O5. The V2O5 nanowires deliver an initial discharge/charge capacity of 103 mAh g-1/110 mAh g-1 and the highest discharge capacity of 130 mAh g-1 in the sixth cycle at C/20 rate in the cell-configuration system. In operando synchrotron diffraction and in operando X-ray absorption spectroscopy together with ex situ Raman and X-ray photoelectron spectroscopy reveal the reversibility of magnesium insertion/extraction and provide information on the crystal structure evolution and changes of the oxidation states during cycling.
ABSTRACT
Compositing different crystal structures of layered transition metal oxides (LTMOs) is an emerging strategy to improve the electrochemical performance of LTMOs in sodium-ion batteries. Herein, a cobalt-free P2/P3-layered spinel composite, P2/P3-LS-Na1/2Mn2/3Ni1/6Fe1/6O2 (LS-NMNF), is synthesized, and the synergistic effects from the P2/P3 and spinel phases were investigated. The material delivers an initial discharge capacity of 143 mAh g-1 in the voltage range of 1.5-4.0 V and displays a capacity retention of 73% at the 50th cycle. The material shows a discharge capacity of 72 mAh g-1 at 5C. This superior rate performance by the material could be by virtue of the increased electronic conductivity contribution of the incorporated spinel phase. The charge compensation mechanism of the material is investigated by in operando X-ray absorption spectroscopy (in a voltage range of 1.5-4.5 V vs Na+/Na), which revealed the contribution of all transition metals toward the generated capacity. The crystal structure evolution of each phase during electrochemical cycling was analyzed by in operando X-ray diffraction. Unlike in the case of many reported P2/P3 composite cathode materials and spinel-incorporated cobalt-containing P2/P3 composites, the formation of a P'2 phase at the end of discharge is absent here.
ABSTRACT
Sodium-ion and potassium-ion batteries (NIBs and KIBs) are considered promising alternatives to replace lithium-ion batteries (LIBs) in energy storage applications due to the natural abundance and low cost of Na and K. Nevertheless, a critical challenge is that the large size of Na+ /K+ leads to a huge volume change of the hosting material during electrochemical cycling, resulting in rapid capacity decay. Among negative candidates for alkali-metal-ion batteries, SnS2 is attractive due to the competitively high specific capacity, low redox potential and high abundance. Porous few-layer SnS2 nanosheets are inâ situ grown on reduced graphene oxide, forming a SnS2 -rGO sandwich structure via strong C-O-Sn bonds. This nano-scaled sandwich structure not only shortens Na+ /K+ and electron transport pathways but also accommodates volume expansion, thereby enabling high and stable electrochemical cycling performance of SnS2 -rGO. This work explores the influence of different conductive carbons (Superâ P and C65) on the SnS2 -rGO electrode. In addition, the effects of the electrolyte additive fluoroethylene carbonate (FEC) on the electrochemical performance in NIBs and KIBs is evaluated. This work provides guidelines for optimized electrode structure design, electrolyte additives and carbon additives for the realization of better NIBs and KIBs.
ABSTRACT
The charging of nanoporous carbon via electrodeposition of solid iodine from iodide-based electrolyte is an efficient and ecofriendly method to produce battery cathodes. Here, the interactions at the carbon/iodine interface from first contact with the aqueous electrolyte to the electrochemical polarization conditions in a hybrid cell are investigated by a combination of in situ and ex situ methods. EQCM investigations confirm the flushing out of water from the pores during iodine formation at the positive electrode. XPS of the carbon surface shows irreversible oxidation at the initial electrolyte immersion and to a larger extent during the first few charge/discharge cycles. This leads to the creation of functional groups at the surface while further reactive sites are consumed by iodine, causing a kind of passivation during a stable cycling regime. Two sources of carbon electrode structural modifications during iodine formation in the nanopores have been revealed by in situ Raman spectroscopy, (i) charge transfer and (ii) mechanical strain, both causing reversible changes and thus preventing performance deterioration during the long-term cycling of energy storage devices that use iodine-charged carbon electrodes.
ABSTRACT
Polyanion-type phosphate materials, such as M3 V2 (PO4 )3 (M = Li/Na/K), are promising as insertion-type negative electrodes for monovalent-ion batteries including Li/Na/K-ion batteries (lithium-ion batteries (LIBs), sodium-ion batteries (SIBs), and potassium-ion batteries (PIBs)) with fast charging/discharging and distinct redox peaks. However, it remains a great challenge to understand the reaction mechanism of materials upon monovalent-ion insertion. Here, triclinic Mg3 V4 (PO4 )6 /carbon composite (MgVP/C) with high thermal stability is synthesized via ball-milling and carbon-thermal reduction method and applied as a pseudocapacitive negative electrode in LIBs, SIBs, and PIBs. In operando and ex situ studies demonstrate the guest ion-dependent reaction mechanisms of MgVP/C upon monovalent-ion storage due to different sizes. MgVP/C undergoes an indirect conversion reaction to form Mg0 , V0 , and Li3 PO4 in LIBs, while in SIBs/PIBs the material only experiences a solid solution with the reduction of V3+ to V2+ . Moreover, in LIBs, MgVP/C delivers initial lithiation/delithiation capacities of 961/607 mAh g-1 (30/19 Li+ ions) for the first cycle, despite its low initial Coulombic efficiency, fast capacity decay for the first 200 cycles, and limited reversible insertion/deinsertion of 2 Na+ /K+ ions in SIBs/PIBs. This work reveals a new pseudocapacitive material and provides an advanced understanding of polyanion phosphate negative material for monovalent-ion batteries with guest ion-dependent energy storage mechanisms.
ABSTRACT
Careful development and optimization of negative electrode (anode) materials for Na-ion batteries (SIBs) are essential, for their widespread applications requiring a long-term cycling stability. BiFeO3 (BFO) with a LiNbO3-type structure (space group R3c) is an ideal negative electrode model system as it delivers a high specific capacity (770 mAh g-1), which is proposed through a conversion and alloying mechanism. In this work, BFO is synthesized via a sol-gel method and investigated as a conversion-type anode model-system for sodium-ion half-cells. As there is a difference in the first and second cycle profiles in the cyclic voltammogram, the operating mechanism of charge-discharge is elucidated using in operando X-ray absorption spectroscopy. In the first discharge, Bi is found to contribute toward the electrochemical activity through a conversion mechanism (Bi3+ â Bi0), followed by the formation of Na-Bi intermetallic compounds. Evidence for involvement of Fe in the charge storage mechanism through conversion of the oxide (Fe3+) form to metallic Fe and back during discharging/charging is also obtained, which is absent in previous literature reports. Reversible dealloying and subsequent oxidation of Bi and oxidation of Fe are observed in the following charge cycle. In the second discharge cycle, a reduction of Bi and Fe oxides is observed. Changes in the oxidation states of Bi and Fe, and the local coordination changes during electrochemical cycling are discussed in detail. Furthermore, the optimization of cycling stability of BFO is carried out by varying binders and electrolyte compositions. Based on that, electrodes prepared with the Na-carboxymethyl cellulose (CMC) binder are chosen for optimization of the electrolyte composition. BFO-CMC electrodes exhibit the best electrochemical performance in electrolytes containing fluoroethylene carbonate (FEC) as the additive. BFO-CMC electrodes deliver initial capacity values of 635 and 453 mAh g-1 in the Na-insertion (discharge) and deinsertion (charge) processes, respectively, in the electrolyte composition of 1 M NaPF6 in EC/DEC (1:1, v/v) with a 2% FEC additive. The capacity values stabilize around 10th cycle and capacity retention of 73% is observed after 60 cycles with respect to the 10th cycle charge capacity.
ABSTRACT
In the present tetragonal modification of dysprosium orthomolybdate, Dy(2)(MoO(4))(3), the Dy, one Mo and one O atom are located on a mirror plane with Wyckoff symbol 4e, while another Mo atom is located on a fourfold inverse axis, Wyckoff symbol 2a. A single crystal was selected from a polycrystalline mixture of the Dy(2)O(3)-ZrO(2)-MoO(3) system and was stable at room temperature for at least three months. The structure refinement does not indicate the presence of Zr on the Dy sites (to within 1% accuracy). Thus, the stabilization of the tetragonal form is due to disordered positions for a second O atom and split positions for a third O atom that also maintain the DyO(7) coordination, which is not expected for short Dy-O distances [2.243 (6)-2.393 (5) Å].
ABSTRACT
FeS-based composites are sustainable conversion electrode materials for lithium-ion batteries, combining features like low cost, environmental friendliness, and high capacities. However, they suffer from fast capacity decay and low electron conductivity. Herein, novel insights into a surprising phenomenon of this material are provided. A FeS/Fe3 C/C nanocomposite synthesized by a facile hydrothermal method is compared with pure FeS. When applied as anode materials for lithium-ion batteries, these two types of materials show different capacity evolution upon cycling. Surprisingly, the composite delivers a continuous increase in capacity instead of the expected capacity fading. This unique behavior is triggered by a catalyzing effect of Fe3 C nanoparticles. The Fe3 C phase is a beneficial byproduct of the synthesis and was not intentionally obtained. To further understand the effect of interconnected carbon balls on FeS-based electrodes, complementary analytic techniques are used. Exâ situ X-ray radiation diffraction and exâ situ scanning electron microscopy are employed to track phase fraction and morphology structure. In addition, the electrochemical kinetics and resistance are evaluated by cyclic voltammetry and electrochemical impedance spectroscopy. These results reveal that the interconnected carbon balls have a profound influence on the properties of FeS-based electrodes resulting in an increased electrode conductivity, reduced particle size, and maintenance of the structure integrity.
ABSTRACT
The detailed understanding of kinetic and phase dynamics taking place in lithium-ion batteries (LIBs) is crucial for optimizing their properties. It was previously reported that Fe1-xS/C nanocomposites display a superior performance as anode materials in LIBs. However, the underlying lithium storage mechanism was not entirely understood during the 1st cycle. In this work, in operando synchrotron techniques are used to track lithium storage mechanisms during the 1st (de)-lithiation process in the Fe1-xS/C nanocomposite. The combination of in operando techniques enables the uncovering of the phase fraction alternations and crystal structural variations on different length-scales. Additionally, the investigation of kinetic processes, morphological changes, and internal resistance dynamics is discussed. These results reveal that the phase transition of Fe1-xS â Li2Fe1-xS2 â Fe0 + Li2S occurs during the 1st lithiation process. The redox reaction of Fe2+ + 2e- â Fe0 and the Fe K-edge X-ray absorption spectroscopy (XAS) transformation process are confirmed by in operando XAS. During the 1st de-lithiation process, Fe0 and Li2S convert to Li2-yFe1-xS2 and Li+ is extracted from Li2S to form Li2-yS. The phase transition from Li2S to Li2-yS is not detected in previous reports. After the 1st de-lithiation process, amorphous lithiated iron sulfide nanoparticles are embedded within the remaining Li2S matrix.
ABSTRACT
Lithium- and manganese-rich transition-metal oxide (LMR-NMC) electrodes have been designed either as heterostructures of the primary components ("composite") or as core-shell structures with improved electrochemistry reported for both configurations when compared with their primary components. A detailed electrochemical and structural investigation of the 0.5Li2MnO3-0.5LiNi0.5Mn0.3Co0.2O2 composite and core-shell structured positive electrode materials is reported. The core-shell material shows better overall electrochemical performance compared to its corresponding composite material. While both configurations gave the same initial charge capacity of â¼300 mAh/g when cycled at a rate of 10 mA/g at 25 °C, the core-shell sample gives a discharge capacity of 232 mAh/g compared to 208 mAh/g delivered by the composite sample. Also, the core-shell sample gave better rate capability and a smaller first-cycle irreversible capacity loss than the composite sample. The improved performance of the core-shell material is attributed to its lower surface reactivity and limited structural change since the more stable Li2MnO3 shell screens the more reactive Ni-rich core material from interacting with either air or electrolyte at high potentials, thereby preventing electrode surface modification. In situ X-ray diffraction correlated with electrochemical data revealed that the composite sample shows stronger volumetric changes in the lattice parameters during charging to 4.8 V. In addition, X-ray absorption spectroscopy showed an incomplete Ni reduction process after the first discharge for the composite sample. From these results, it was shown that this leads to a more severe degradation in the composite material that affects Li+ intercalation in the subsequent discharge, thereby resulting in its poorer performance. Furthermore, to confirm these results, another LMR-NMC material with a different composition (having a Ni-poor core)-0.5Li2MnO3-0.5LiNi0.33Mn0.33Co0.33O2-was investigated. The core-shell structured positive electrode material also gave an improved electrochemical performance compared to the corresponding composite positive electrode material. These results show that the core-shell configuration could effectively be used to improve the performance of the LMR-NMC materials to enable future high-energy applications.
ABSTRACT
NH4+ preintercalated V2O5·nH2O nanobelts with a large interlayer distance of 10.9 Å were prepared by the hydrothermal method. The material showed a large specific capacity of 391 mA·h·g-1 at the 500 mA·g-1 current density in aqueous rechargeable zinc batteries. In operando synchrotron X-ray diffraction demonstrated that the material experienced reversible solid-solution reaction and two-phase transition during charge-discharge cycling, accompanied by the reversible formation/decomposition of a ZnSO4Zn3(OH)6·5H2O byproduct. In operando X-ray absorption spectroscopy confirmed the reversible reduction/oxidation of V, together with small changes in the VO6 local structure. The formation of byproduct was attributed to the dehydration of [Zn(H2O)6]2+, which concurrently improved the desolvation of [Zn(H2O)6]2+ into Zn2+. Bond valence sum map analysis and electrochemical impedance spectroscopy demonstrated that the byproduct improved the charge transfer kinetics of the electrode. Cyclic voltammetry and galvanostatic intermittent titration technique showed that the electrode reaction was dominated by ionic intercalation where the discharge capacity in the voltage window of 1.4-0.85 V was attributed to the intercalation of [Zn(H2O)6]2+, followed by the intercalation of Zn2+ at 0.85-0.4 V.
ABSTRACT
O3-type layered NaNi0.5Ti0.5O2, which has been reported previously as a promising cathode material for Na-ion batteries, has been characterized using comprehensive operando techniques combined with electrochemical and magnetization measurements. Operando Synchrotron diffraction revealed a reversible O3-P3 transformation during charge and discharge without any intermediate phases, which stands in contrast to NaNiO2 and NaNi0.5Mn0.5O2. Operando X-ray absorption studies showed that the electrochemical process in the potential window of 1.5-4.2 V vs Na+/Na is sustained exclusively by Ni oxidation and reduction while Ti remains inactive. These findings are further supported by ex situ magnetization measurements, yielding a lower paramagnetic moment in the charged state in agreement with Ni oxidation. On the basis of these insights, we elaborate on the beneficial stabilizing effect of Ti. However, a strong C-rate dependence for NaNi0.5Ti0.5O2 and NaNi0.5Mn0.5O2 during cycling known from the literature points at a rather high influence of the original structure stacking and the associated Na migration paths.
ABSTRACT
The carbon coating strategy is intensively used in the modification of conversion-type anode materials to improve their cycling stability and rate capability. Thus, it is necessary to elucidate the modification mechanism induced by carbon coating. For this purpose, bare ZnMn2O4, carbon-derivative-coated ZnMn2O4, and carbon-coated ZnO-MnO composite materials have been synthesized and investigated in-depth. Herein, high-temperature synchrotron radiation diffraction is used to monitor the phase transition from ZnMn2O4 to ZnO-MnO composite during the carbonization process. The electrochemical performance has been evaluated by cyclic voltammetry, galvanostatic cycling, and electrochemical impedance spectroscopy. The carbon- and carbon-derivative-coated samples display well-improved cycling stability in terms of suppressed electrode polarization, a moderate increase in resistance, and slight capacity variation. The influence of carbon coating on the intrinsic conversion process is investigated by ex situ X-ray absorption spectroscopy, which reveals the evolution of Zn and Mn oxidation states. This result confirms that the strong capacity variation of the bare ZnMn2O4 is induced not only by the reversible charge storage in the solid electrolyte interphase but also by the phase evolution of active materials. Carbon coating is an effective method to prevent the additional oxidation of MnO to Mn3O4, which leads to a stabilization of the main conversion reaction.
ABSTRACT
Mining of Dzhida ore deposits in Russia has caused the formation of a large tailings dam with technogenic sands and contamination of nearby district soils. Geochemical fractions of technogenic sands were divided by a sequential extraction procedure. The sampling points with maximum concentration of Pb, Cu, and Zn were selected for investigation of heavy metal mobility. Two previously described methods of heavy metal fractionation using selective extraction were applied: a procedure developed by the Community Bureau of Reference of the Commission of the European Communities (BCR procedure) and Tessier's fractionation scheme. Despite some differences in Pb extractions, the two procedures describe equally well the distribution of heavy metals on geochemical fractions. BCR procedure was chosen as a fast method of heavy metal mobile form estimation. For considered mining object, it is revealed that there are different characters of heavy metal mobility sequence in the soils Zn > Cu > Pb and technogenic sands Pb > Zn > Cu.
Subject(s)
Environmental Monitoring , Metals, Heavy/analysis , Mining , Molybdenum , Soil Pollutants/analysis , GermanyABSTRACT
Worries about lithium supplies have led to the development of research on sodium batteries. Sodium-ion batteries are regarded as the next generation of energy-storage devices thanks to the generous resources of sodium. In spite of that, structural changes in the electrode materials remain the main challenge of this storage technology. NaCoO2 has been widely investigated as a competitive candidate for LiCoO2. It has been found that the electrochemical cycling curves of this material present numerous potential steps as a result of electronic transitions and/or structural ordering. From this standpoint, this paper reports a novel cathode material, Na2/3Co0.95Ti0.05O2, where 5% of cobalt was replaced by titanium, prepared via a facile solid-state route. The sodiation/desodiation mechanism of this layered material was investigated. Na//Na2/3Co0.95Ti0.05O2 exhibits a first initial capacity of 119 mAh/g in the potential window 2-4.2 V with less potential jumps in the potential versus capacity curve compared to NaCoO2. Genuinely, the electrochemistry of this material demonstrated a reversibility upon the insertion/desinertion process with low polarization. In situ synchrotron investigations on Na2/3Co0.95Ti0.05O2 reveal the occurrence of reversible ordered phases. Ex situ magic-angle-spinning NMR disclosed different environments around sodium starting from the pristine state to the end of charge.
ABSTRACT
A carbon-coated Mg0.5Ti2(PO4)3 polyanion material was prepared by the sol-gel method and then studied as the negative electrode materials for lithium-ion and sodium-ion batteries. The material showed a specific capacity of 268.6 mAh g-1 in the voltage window of 0.01-3.0 V vs Na+/Na0. Due to the fast diffusion of Na+ in the NASICON framework, the material exhibited superior rate capability with a specific capacity of 94.4 mAh g-1 at a current density of 5A g-1. Additionally, 99.1% capacity retention was achieved after 300 cycles, demonstrating excellent cycle stability. By comparison, Mg0.5Ti2(PO4)3 delivered 629.2 mAh g-1 in 0.01-3.0 V vs Li+/Li0, much higher than that of the sodium-ion cells. During the first discharge, the material decomposed to Ti/Mg nanoparticles, which were encapsulated in an amorphous SEI and Li3PO4 matrix. Li+ ions were stored in the Li3PO4 matrix and the SEI film formed/decomposed in subsequent cycles, contributing to the large Li+ capacity of Mg0.5Ti2(PO4)3. However, the lithium-ion cells exhibited inferior rate capability and cycle stability compared to the sodium-ion cells due to the sluggish electrochemical kinetics of the electrode.