Observation of chiral and slow plasmons in twisted bilayer graphene.

Moiré superlattices have led to observations of exotic emergent electronic properties such as superconductivity and strong correlated states in small-rotation-angle twisted bilayer graphene (tBLG)1,2. Recently, these findings have inspired the search for new properties in moiré plasmons. Although plasmon propagation in the tBLG basal plane has been studied by near-field nano-imaging techniques3-7, the general electromagnetic character and properties of these plasmons remain elusive. Here we report the direct observation of two new plasmon modes in macroscopic tBLG with a highly ordered moiré superlattice. Using spiral structured nanoribbons of tBLG, we identify signatures of chiral plasmons that arise owing to the uncompensated Berry flux of the electron gas under optical pumping. The salient features of these chiral plasmons are shown through their dependence on optical pumping intensity and electron fillings, in conjunction with distinct resonance splitting and Faraday rotation coinciding with the spectral window of maximal Berry flux. Moreover, we also identify a slow plasmonic mode around 0.4 electronvolts, which stems from the interband transitions between the nested subbands in lattice-relaxed AB-stacked domains. This mode may open up opportunities for strong light-matter interactions within the highly sought after mid-wave infrared spectral window8. Our results unveil the new electromagnetic dynamics of small-angle tBLG and exemplify it as a unique quantum optical platform.

Dynamic imaging of micro-vibrations with an ultra-wide bandwidth and a femtometer noise using switchable pulsed laser interferometry.

Imaging the complex dynamics of micro-vibrations plays a fundamental role in the investigation of microelectromechanical systems (MEMS). However, it remains a challenge for achieving both a wide bandwidth and a low noise due to the high photodetector noise and electromagnetic interference at GHz frequencies. Here, we propose a pulsed laser interferometry system with an adaptable switch to image GHz vibrations based on stroboscopic mixing, while measuring lower-frequency vibrations based on the homodyne scheme. The noise power spectral density is shown in both regions from DC to 10 GHz with an average noise down to 30.8 fm/√Hz at GHz frequencies, which holds the highest resolution to the best of our knowledge. Vibrational amplitude and phase mappings of a kHz comb-drive resonator, a GHz piezoelectric transducer, and a GHz film bulk acoustic resonator are presented with animated visualizations and k-space analysis, paving a new paradigm for the first time to image and analyze various MEMS devices of a bandwidth spanning 10 orders of magnitude.

Superlong Metal-Organic Framework Nanowire Fabricated via Steam-Assisted Conversion.

1D nanomaterials have attracted great attention due to their outstanding anisotropic and linear structures. A facile method is developed to fabricate 1D copper metal-organic framework nanowires (Cu-MOF-NW) through steam-assisted conversion from Cu-MOF precursors. During the steam-assisted conversion, Cu-MOF precursor gradually dissolves in methanol steam, and then recrystallized into Cu-MOF-NW, which shows high aspect ratio of about 600 and identical crystal structure of MOF-74. As-prepared Cu-MOF-NW with multiscale porous structure can effectively remove cationic dyes even in dye mixture. Moreover, Cu-MOF-NW, as an ideal template, is calcined to form Cu nanoparticle-doped carbon nanofiber with maintaining its 1D morphology, which shows excellent electrocatalytic activity for the non-enzymatic sensing of glucose.

GhWER controls fiber initiation and early elongation by regulating ethylene signaling pathway in cotton (Gossypium hirsutum).

Cotton fibers are specialized single-cell trichomes derived from epidermal cells, similar to root hairs and trichomes in Arabidopsis. While the MYB-bHLH-WD40 (MBW) complex has been shown to regulate initiation of both root hairs and trichomes in Arabidopsis, the role of their homologous gene in cotton fiber initiation remains unknown. In this study, we identified a R2R3 MYB transcription factor (TF), GhWER, which exhibited a significant increase in expression within the outer integument of ovule at -1.5 DPA (days post anthesis). Its expression peaked at -1 DPA and then gradually decreased. Knockout of GhWER using CRISPR technology inhibited the initiation and early elongation of fiber initials, resulting in the shorter mature fiber length. Additionally, GhWER interacted with two bHLH TF, GhDEL65 and GhbHLH121, suggesting a potential regulatory complex for fiber development. RNA-seq analysis of the outer integument of the ovule at -1.5 DPA revealed that the signal transduction pathways of ethylene, auxin and gibberellin were affected in the GhWER knockout lines. Further examination demonstrated that GhWER directly activated ethylene signaling genes, including ACS1 and ETR2. These findings highlighted the biological function of GhWER in regulating cotton fiber initiation and early elongation, which has practical significance for improving fiber quality and yield. Supplementary Information: The online version contains supplementary material available at 10.1007/s11032-024-01477-6.

Urine-based SERS and multivariate statistical analysis for identification of non-muscle-invasive bladder cancer and muscle-invasive bladder cancer.

Bladder cancer (BC) is an epidemiological urologic malignancy that continues to increase each year. Early diagnosis and prognosis monitoring is always significant in clinical practice, especially in distinguishing non-muscle-invasive bladder cancer (NMIBC) from muscle-invasive bladder cancer (MIBC), due to the various depths of tumor invasion related to different therapeutic schedules and recurrence rates. Common diagnostic approaches are too invasive or generally inefficient in accuracy and specificity. In this work, a totally non-invasive and cost-effective method is established by investigating urine samples using surface-enhanced Raman spectroscopy (SERS) and multivariate statistical analysis. The comparison of urine SERS spectra shows the intensities of characteristic peaks for DNA/RNA, hypoxanthine, albumin, D-( +)-galactosamine, fatty acids, and some amino acids are distinguishable in BC occurrence and invasion progression. A PLS-LDA-based two-step binary classification scheme is performed on urine SERS spectra and the diagnostic accuracies were 97.7% and 96.3% for healthy individuals versus BC patients and NMIBC versus MIBC patients, respectively. Moreover, the impact of urine SERS spectral lengths in reaching high-precision recognition of BC is investigated. The results show that the Raman peaks at 803, 893, 1139, 1375, and 1466 cm-1 play an essential role in correctly categorizing healthy control, NMIBC, and MIBC patients, and SERS spectra ranges from 400 to 1600 cm-1 are enough for this identification task. These findings provide a sensitive, label-free, rapid, and totally non-invasive way for assessment of invasion depth of BC to its early diagnosis and prognosis monitoring, as well as valuable insights for selecting reasonable spectral range to enhance the measurement efficiency especially in large-scale sample datasets.

Recombinant therapeutic proteins degradation and overcoming strategies in CHO cells.

Mammalian cell lines are frequently used as the preferred host cells for producing recombinant therapeutic proteins (RTPs) having post-translational modified modification similar to those observed in proteins produced by human cells. Nowadays, most RTPs approved for marketing are produced in Chinese hamster ovary (CHO) cells. Recombinant therapeutic antibodies are among the most important and promising RTPs for biomedical applications. One of the issues that occurs during development of RTPs is their degradation, which caused by a variety of factors and reducing quality of RTPs. RTP degradation is especially concerning as they could result in reduced biological functions (antibody-dependent cellular cytotoxicity and complement-dependent cytotoxicity) and generate potentially immunogenic species. Therefore, the mechanisms underlying RTP degradation and strategies for avoiding degradation have regained an interest from academia and industry. In this review, we outline recent progress in this field, with a focus on factors that cause degradation during RTP production and the development of strategies for overcoming RTP degradation. KEY POINTS: • The recombinant therapeutic protein degradation in CHO cell systems is reviewed. • Enzymatic factors and non-enzymatic methods influence recombinant therapeutic protein degradation. • Reducing the degradation can improve the quality of recombinant therapeutic proteins.

Serum-free medium for recombinant protein expression in insect cells.

The baculovirus expression vector system (BEVS) has been widely used to produce recombinant proteins because of several advantages, such as eukaryotic post-translational modifications similar to those in mammalian cells, high expression levels and safety, and large gene capacity. Usually, insect cell culture requires 5%‒10% fetal bovine serum, which has many adverse effects, including high cost, heterogeneity between batches, complex composition, and pollution risks. Therefore, serum-free medium (SFM) is indispensable for the production of recombinant proteins in insect cell culture. Here, the most commonly used insect cell lines and three insect cell media, namely basic medium, SFM, and chemically defined medium, are summarized. The basic components of insect cell SFM are similar to those of other cells but contain special components. The components, functions, and issues of different SFM used for insect cell culture are reviewed. In recent years, some special additives have been demonstrated to increase recombinant protein expression yield and quality in BEVS, and the functions and possible mechanisms of small-molecule additives are reviewed herein. Finally, future perspectives of SFM used in BEVS for recombinant protein production are discussed.

An artificial intelligence algorithm for the detection of pulmonary ground-glass nodules on spectral detector CT: performance on virtual monochromatic images.

BACKGROUND: This study aims to assess the performance of an established an AI algorithm trained on conventional polychromatic computed tomography (CT) images (CPIs) to detect pulmonary ground-glass nodules (GGNs) on virtual monochromatic images (VMIs), and to screen the optimal virtual monochromatic energy for the clinical evaluation of GGNs. METHODS: Non-enhanced chest SDCT images of patients with pulmonary GGNs in our clinic from January 2022 to December 2022 were continuously collected: adenocarcinoma in situ (AIS, n = 40); minimally invasive adenocarcinoma (MIA, n = 44) and invasive adenocarcinoma (IAC, n = 46). A commercial CAD system based on deep convolutional neural networks (DL-CAD) was used to process the CPIs, 40, 50, 60, 70, and 80 keV monochromatic images of 130 spectral CT images. AI-based histogram parameters by logistic regression analysis. The diagnostic performance was evaluated by the receiver operating characteristic (ROC) curves, and Delong's test was used to compare the CPIs group with the VMIs group. RESULTS: When distinguishing IAC from MIA, the diagnostic efficiency of total mass was obtained at 80 keV, which was superior to those of other energy levels (P < 0.05). And Delong's test indicated that the differences between the area-under-the-curve (AUC) values of the CPIs group and the VMIs group were not statistically significant (P > 0.05). CONCLUSION: The AI algorithm trained on CPIs showed consistent diagnostic performance on VMIs. When pulmonary GGNs are encountered in clinical practice, 80 keV could be the optimal virtual monochromatic energy for the identification of preoperative IAC on a non-enhanced chest CT.

Serum chemokine IL-8 acts as a biomarker for identifying COVID-19-associated persistent severe acute kidney injury.

OBJECTIVES: Persistent severe acute kidney injury (PS-AKI) is associated with poor clinical outcomes. Our study attempted to evaluate the diagnostic value of chemokines for early-stage PS-AKI prediction. METHODS: According to the KDIGO criteria, 115 COVID-19 patients diagnosed with stage 2/3 AKI were recruited from the intensive care unit between December 2022 and February 2023. Primary clinical outcomes included detecting PS-AKI in the first week (≥ KDIGO stage 2 ≥ 72 h). Cytometric Bead Array was used to detect patient plasma levels (interleukin-8 (IL-8), C-C chemokine ligand 5 (CCL5), chemokine (C-X-C Motif) ligand 9 (CXCL9), and interferon-inducible protein 10 (IP-10)) of chemokines within 24 h of enrollment. RESULTS: Of the 115 COVID-19 patients with stage 2/3 AKI, 27 were diagnosed with PS-AKI. Among the four measured chemokines, only the IL-8 level was significantly elevated in the PS-AKI group than in the Non-PS-AKI group. IL-8 was more effective as a biomarker while predicting PS-AKI with an area under the curve of 0.769 (0.675-0.863). This was superior to other biomarkers related to AKI, including serum creatinine. Moreover, plasma IL-8 levels of >32.2 pg/ml on admission could predict PS-AKI risk (sensitivity = 92.6%, specificity = 51.1%). Additionally, the IL-8 level was associated with total protein and IL-6 levels. CONCLUSION: Plasma IL-8 is a promising marker for the early identification of PS-AKI among COVID-19 patients. These findings should be validated in further studies with a larger sample size.

Screening Proteins That Interact With AcHog1 and the Functional Analysis of AcSko1 in Aspergillus cristatus.

Aspergillus cristatus is a dominant fungus formed during the "flowering" process of Fuzhuan brick tea. Previous research has established that the sporulation of Aspergillus nidulans, a model organism of filamentous fungi, is regulated by light. However, the sporulation of A. cristatus is dependent on osmotic stress. In a previous study, we used pull-down and mass spectrometry to identify proteins that interacted with AcHog1 in A. cristatus when cultured under different conditions of osmotic stress. In the present study, we analyzed the proteins we identified previously to investigate their functional role. The AA1E3BER4 protein was located downstream of Hog1 in the HOG branch pathway and was identified that was regulated by AcHog1. Furthermore, yeast two-hybrid analysis showed that AA1E3BER4 interacted with AcHog1. In addition, we knocked out and complemented the Acsko1 gene encoding the AA1E3BER4 protein. We found that the number of sexual and asexual spores were downregulated by 3.81- and 4.57-fold, respectively, in the ΔAcsko1 strain. The sensitivity of the ΔAcsko1 strain to sorbitol and sucrose, as regulators of osmotic stress, increased, and the sensitivity to high sucrose was higher than that of sorbitol. Acsko1 also regulated the response of A. cristatus to oxidative stress, Congo red, and SDS (sodium dodecyl sulfate). In addition, the deletion of Acsko1 significantly increased the pigment of the ΔAcsko1 strain. This is the first study to report the role of the sko1 gene in oxidative stress, stress-induced damage to the cell wall, and pigment in Aspergillus cristatus.

Routing the Exciton Emissions of WS2 Monolayer with the High-Order Plasmon Modes of Ag Nanorods.

Locally routing the exciton emissions in two-dimensional (2D) transition-metal dichalcogenides along different directions at the nanophotonic interface is of great interest in exploiting the promising 2D excitonic systems for functional nano-optical components. However, such control has remained elusive. Herein we report on a facile plasmonic approach for electrically controlled spatial modulation of the exciton emissions in a WS2 monolayer. The emission routing is enabled by the resonance coupling between the WS2 excitons and the multipole plasmon modes in individual silver nanorods placed on a WS2 monolayer. Different from prior demonstrations, the routing effect can be modulated by the doping level of the WS2 monolayer, enabling electrical control. Our work takes advantage of the high-quality plasmon modes supported by simple rod-shaped metal nanocrystals for the angularly resolved manipulation of 2D exciton emissions. Active control is achieved, which offers great opportunities for the development of nanoscale light sources and nanophotonic devices.

Redox Concomitant Formation Method for Fabrication of Cu(I)-MOF/Polymer Composites with Antifouling Properties.

Marine biofouling, which is one of the technical challenges hindering the growth of the marine economy, has been controlled using cuprous oxide (Cu2O) nanoparticles due to the exceptional antifouling properties of Cu(I) ions. However, Cu2O nanoparticles have encountered bottlenecks due to explosive releases of Cu+ ions, high toxicity at elevated doses, and long-term instability. Here, we present a novel method called Redox Concomitant Formation (RCF) for fabricating a hierarchical Cu(I) metal-organic framework polypyrrole (Cu(I)-MOF/PPy) composite. This method enables in situ phase transition via successive redox reactions that change the chemical valence state and coordination mode of Cu(II)-MOF, resulting in a new structure of Cu(I)-MOF while creating a PPy layer surrounded by the hierarchical structure. Owing to the steady release of Cu+ ions from the Cu(I) sites and photothermal properties of PPy, Cu(I)-MOF/PPy exhibits superior and broad-spectrum resistance to marine bacteria, algae, and surface-adhered biofilms in complex biological environments, as well as long-term stability, resulting in 100 % eradication efficiency under solar-driven heating. Mechanistic insights into successive structural redox reactions and formation using the RCF method are provided in detail, enabling the fabrication of novel MOFs with the desired composition and structure for a wide range of potential applications.

Carbonized Polymer Dots for Controlling Construction of MoS2 Flower-Like Nanospheres to Achieve High-Performance Li/Na Storage Devices.

Despite being one of the most promising materials in anode materials, molybdenum sulfide (MoS2 ) encounters certain obstacles, such as inadequate cycle stability, low conductivity, and unsatisfactory charge-discharge (CD) rate performance. In this study, a novel approach is employed to address the drawbacks of MoS2 . Carbon polymer dots (CPDs) are incorporated to prepare three-dimensional (3D) nanoflower-like spheres of MoS2 @CPDs through the self-assembly of MoS2 2D nanosheets, followed by annealing at 700 °C. The CPDs play a main role in the creation of the nanoflower-like spheres and also mitigate the MoS2 nanosheet limitations. The nanoflower-like spheres minimize volume changes during cycling and improve the rate performance, leading to exceptional rate performance and cycling stability in both Lithium-ion and Sodium-ion batteries (LIBs and SIBs). The optimized MoS2 @CPDs-2 electrode achieves a superb capacity of 583.4 mA h g-1 at high current density (5 A g-1 ) after 1000 cycles in LIBs, and the capacity remaining of 302.8 mA h g-1 after 500 cycles at 5 A g-1 in SIBs. Additionally, the full cell of LIBs/SIBs exhibits high capacity and good cycling stability, demonstrating its potential for practical application in fast-charging and high-energy storage.

Ultrafast and Scalable Fabrication of Coordination Polymer Films on Network Substrates via Thermal Current-Induced Dewetting.

Coordination polymers are among the most favored active materials by researchers due to their broad application prospects. However, most of them are usually difficult to directly process into applicable devices because of their unsatisfied processability. One process of great concern for researchers is the in situ preparation of the coordination polymer on the applicable substrate, especially for the favored network substrates with good mechanical properties and 3D porous structure, which could provide obvious convenience and facilitation in the application process. Herein, we present an ultrafast and scalable thermal current-induced dewetting strategy to obtain uniform coordination polymer film in situ on network substrates, which could enable unprecedented convenience to obtain directly usable coordination polymer composites such as practical catalytic electrodes with excellent electrocatalytic performance. The proposed thermal current-induced dewetting method provides a highly adaptable and efficient practical production approach to integrate coordination polymer materials with network substrates and also provides new inspiration for understanding and applying the dewetting process on complex 3D network substrates.

Gold Nanorods: The Most Versatile Plasmonic Nanoparticles.

Gold nanorods (NRs), pseudo-one-dimensional rod-shaped nanoparticles (NPs), have become one of the burgeoning materials in the recent years due to their anisotropic shape and adjustable plasmonic properties. With the continuous improvement in synthetic methods, a variety of materials have been attached around Au NRs to achieve unexpected or improved plasmonic properties and explore state-of-the-art technologies. In this review, we comprehensively summarize the latest progress on Au NRs, the most versatile anisotropic plasmonic NPs. We present a representative overview of the advances in the synthetic strategies and outline an extensive catalogue of Au-NR-based heterostructures with tailored architectures and special functionalities. The bottom-up assembly of Au NRs into preprogrammed metastructures is then discussed, as well as the design principles. We also provide a systematic elucidation of the different plasmonic properties associated with the Au-NR-based structures, followed by a discussion of the promising applications of Au NRs in various fields. We finally discuss the future research directions and challenges of Au NRs.

All-State Switching of the Mie Resonance of Conductive Polyaniline Nanospheres.

Polyaniline (PANI), a conductive polymer, is a promising active material for optical switching. In most studies, active switching has so far been realized only between two states, whereas PANI has a total of six states. The optical properties of nanoscale PANI in all six states have remained unclear. Herein we report on all-state switching of the Mie resonance on PANI nanospheres (NSs) and active plasmon switching on PANI-coated Au nanodisks (NDs). All-state switching of differently sized PANI NSs is achieved by proton doping/dedoping and electrochemical methods. Theoretical studies show that the scattering peaks of the individual PANI NSs originate from Mie resonances. All-state switching is further demonstrated on PANI-coated circular Au NDs, where an unprecedentedly large plasmon peak shift of ∼200 nm is realized. Our study not only provides a fundamental understanding of the optical properties of PANI but also opens the probability for developing high-performance dynamic media for active plasmonics.

Extracellular vesicle-packaged miR-181c-5p from epithelial ovarian cancer cells promotes M2 polarization of tumor-associated macrophages via the KAT2B/HOXA10 axis.

OBJECTIVES: The molecular mechanistic actions of tumor-derived extracellular vesicles (EVs) in modulating macrophage polarization in the tumor microenvironment of epithelial ovarian cancer (EOC) is largely unknown. The study was performed to clarify the effect and downstream mechanism of microRNA-181c-5p (miR-181c-5p)-containing EVs from EOC cells in the M2 polarization of tumor-associated macrophages (TAMs). METHODS: EVs were isolated from normoxic and hypoxic human EOC cells SKOV3. Human mononuclear cell THP-1 was induced by phorbol-12-myristate-13-acetate to differentiate into TAMs. The targeting relationship between miR-181c-5p and KAT2B was verified by dual luciferase reporter gene assay. The interaction between KAT2B and HOXA10 was detected by immunofluorescence, Co-IP and ChIP assays. EdU staining, the scratch test and Transwell assay were used to assess the resultant cell proliferation, migration and invasion. The mouse xenograft model and the pulmonary metastasis model were developed through intraperitoneal injection of SKOV3 cells and tail vein injection of THP-1 cells, respectively. RESULTS: Hypoxic SKOV3 cell-derived EVs could be internalized by TAMs. SKOV3 cell-derived EVs induced by hypoxia (H-EVs) promoted M2 polarization of TAMs and facilitated the proliferation, migration and invasion of SKOV3 cells. miR-181c-5p was highly expressed in H-EVs and promoted the M2 polarization of TAMs. Further, miR-181c-5p targeted KAT2B, upregulated HOXA10 and activated the JAK1/STAT3 pathway, thereby promoting the M2 polarization of TAMs. In both mouse models, H-EV-derived miR-181c-5p promoted growth and metastasis of EOC cells. CONCLUSION: The miR-181c-5p-containing EVs from hypoxic EOC cells may upregulate HOXA10 by targeting KAT2B and activate the JAK1/STAT3 pathway to promote the M2 polarization of TAMs, ultimately promoting growth and metastasis of EOC cells in vitro and in vivo.

Single-cell RNA-seq reveals fate determination control of an individual fibre cell initiation in cotton (Gossypium hirsutum).

Cotton fibre is a unicellular seed trichome, and lint fibre initials per seed as a factor determines fibre yield. However, the mechanisms controlling fibre initiation from ovule epidermis are not understood well enough. Here, with single-cell RNA sequencing (scRNA-seq), a total of 14 535 cells were identified from cotton ovule outer integument of Xu142_LF line at four developmental stages (1.5, 1, 0.5 days before anthesis and the day of anthesis). Three major cell types, fibre, non-fibre epidermis and outer pigment layer were identified and then verified by RNA in situ hybridization. A comparative analysis on scRNA-seq data between Xu142 and its fibreless mutant Xu142 fl further confirmed fibre cluster definition. The developmental trajectory of fibre cell was reconstructed, and fibre cell was identified differentiated at 1 day before anthesis. Gene regulatory networks at four stages revealed the spatiotemporal pattern of core transcription factors, and MYB25-like and HOX3 were demonstrated played key roles as commanders in fibre differentiation and tip-biased diffuse growth respectively. A model for early development of a single fibre cell was proposed here, which sheds light on further deciphering mechanism of plant trichome and the improvement of cotton fibre yield.

Construction of Bimetallic Metal-Organic Frameworks with the Nanosheet-Assembled Hierarchical Hollow Structure for CO2 Fixation.

Incorporating secondary metal nodes with functionality into organic ligand nodes to form a bimetallic metal-organic frameworks (MOFs) would facilitate an enhancement in properties and broaden applied areas of MOFs. Hierarchical tubular Cu/Zn-MOF-74 assembled by nanosheet arrays is synthesized at ambient temperature and pressure by phase transformation of Cu-based precursor MOF in immersion solution with Zn2+. The content of Zn in Cu/Zn-MOF-74 can be controlled by adjusting the concentration of Zn2+ in immersion solution, and it can reach a maximum of 36.4%. Moreover, the catalytic activity toward cycloaddition of CO2 with styrene oxide of Cu/Zn-MOF-74 is improved significantly compared with that of monometallic Cu-MOF-74. Meanwhile, the advanced hierarchical tubular structure contributing to enhancement in catalytic activity enables Cu/Zn-MOF-74 to present higher conversion toward this cycloaddition of CO2 than traditional rod-like Cu/Zn-MOF-74. This templated synthesis would provide an opportunity for designing various bimetallic MOFs or MOF-based compounds with improved performances in multiple applications.

Construction of a Hierarchical Structure of Bimetallic Oxide Derived from Metal-Organic Frameworks.

Bimetallic oxides are a class of promising advanced functional metal nanomaterials, especially in terms of the sophisticated hierarchical structure of bimetallic oxide, which not only is in favor of enhancing their intrinsic physiochemical properties because of more accessible actives sites but also is capable of integrating the synergistic effect between two metals. Herein, we report a novel strategy to controllably construct bimetallic CuO/ZnO nanomaterials with sophisticated hierarchical structure through a pseudomorphic transformation and subsequent calcination process. The resulting unique hierarchical structure of ZnO/CuO is primarily constituted of a nanosphere and a rod grafted in a microscale cube with multidimensional size, which thus results in excellent dispersion, superior charge-transport capability, and abundant accessible active sites. Impressively, the optimized hierarchical structure product of CuO/ZnO (4:1) demonstrates an excellent glucose detection performance with a rapid response time, a wide linear range, a low detection limit, and strong antiinterference ability, realizing more advantages than commercial CuO or ZnO materials and shedding light on the positive correlation of the structure and performance. This study provides a new strategy for the controllable fabrication of the sophisticated hierarchical structure of bimetallic oxide nanomaterials.