Development and inter-laboratory validation of analytical methods for glufosinate and its two metabolites in foods of plant origin.

Glufosinate is widely used to control various weeds. Glufosinate and its main metabolites have become the focus of attention because of their high water solubility and persistence in aquatic systems. Quantification of the agrochemical product and its metabolite residues is essential for the safety of agricultural products. In this study, a highly specific, simple method was developed to directly determine glufosinate and its metabolite residues in 21 plant origin foods by liquid chromatography with tandem mass spectrometry (LC-MS/MS), and it was validated on 11 foods in five laboratories. Finally, the repeatability limit, reproducibility limit, and uncertainty of the method were calculated based on these validated data and used to support the more accurate detection results. Four different chromatographic columns were used to analyze three target compounds, and the anionic polar pesticide column showed the optimum separation and peak shape. Composition of the mobile phase, extraction solvent, and the clean-up procedure were optimized. The developed method was validated on 21 plant origin foods. The average recoveries were 74-115% for all matrices. The validation results of five laboratories showed this method had a good repeatability (RSDr < 9.5%) and reproducibility (RSDR < 18.9%). The method validation parameters met the requirements of guidance established by the European Union (EU) and China for pesticide residue analysis. This methodology can be used for a routine monitoring that performs well for glufosinate and its metabolite residues.

A novel sustainable immunoassay for sensitive detection of atrazine based on the anti-idiotypic nanobody and recombinant full-length antibody.

Immunoassays have been widely used to determine small-molecule compounds in food and the environment, meeting the challenge of obtaining false positive or negative results because of the variance in the batches of antibodies and antigens. To resolve this problem, atrazine (ATR) was used as a target, and anti-idiotypic nanobodies for ATR (AI-Nbs) and a recombinant full-length antibody against ATR (ATR-rAb) were prepared for the development of a sustainable enzyme-linked immunosorbent assay (ELISA). AI-Nb-7, AI-Nb-58, and AI-Nb-66 were selected from an immune phage display library. ATR-rAb was produced in mammalian HEK293 (F) cells. Among the four detection methods explored, the assay using AI-Nb-66 as a coating antigen and ATR-rAb as a detection reagent yielded a half maximal inhibitory concentration (IC50) of 1.66 ng mL-1 for ATR and a linear range of 0.35-8.73 ng mL-1. The cross-reactivity of the assay to ametryn was 64.24%, whereas that to terbutylazine was 38.20%. Surface plasmon resonance (SPR) analysis illustrated that these cross-reactive triazine compounds can bind to ATR-rAb to varying degrees at high concentrations; however, the binding/dissociation kinetic curves and the response values at the same concentration are different, which results in differences in cross-reactivity. Homology modeling and molecular docking revealed that the triazine ring is vital in recognizing triazine compounds. The proposed immunoassay exhibited acceptable recoveries of 84.40-105.36% for detecting fruit, vegetables, and black tea. In conclusion, this study highlights a new strategy for developing sustainable immunoassays for detecting trace pesticide contaminants.

Recognition elements based on the molecular biological techniques for detecting pesticides in food: A review.

Excessive use of pesticides can cause contamination of the environment and agricultural products that are directly threatening human life and health. Therefore, in the process of food safety supervision, it is crucial to conduct sensitive and rapid detection of pesticide residues. The recognition element is the vital component of sensors and methods for fast testing pesticide residues in food. Improper recognition elements may lead to defects of testing methods, such as poor stability, low sensitivity, high economic costs, and waste of time. We can use the molecular biological technique to address these challenges as a good strategy for recognition element production and modification. Herein, we review the molecular biological methods of five specific recognition elements, including aptamers, genetic engineering antibodies, DNAzymes, genetically engineered enzymes, and whole-cell-based biosensors. In addition, the application of these identification elements combined with biosensor and immunoassay methods in actual detection was also discussed. The purpose of this review was to provide a valuable reference for further development of rapid detection methods for pesticide residues.

Recent progress in organic-inorganic hybrid materials as absorbents in sample pretreatment for pesticide detection.

Sample pretreatment is essential for trace analysis of pesticides in complex food and environment matrices. Recently, organic-inorganic hybrid materials have gained increasing attention in pesticide extraction and preconcentration. This review highlighted the common organic-inorganic hybrid materials used as absorbents in sample pretreatment for pesticide detection. Furthermore, the preparation and characterization of organic-inorganic hybrid materials were summarized. To obtain a deep understanding of adsorption toward target analytes, the adsorption mechanism and absorption evaluation were discussed. Finally, the applications of organic-inorganic hybrid materials in sample pretreatment techniques and perspectives in the future are also discussed.

A Novel Fluorescent Sensor Based on Aptamer and qPCR for Determination of Glyphosate in Tap Water.

Glyphosate (GLYP) is a broad-spectrum, nonselective, organic phosphine postemergence herbicide registered for many food and nonfood fields. Herein, we developed a biosensor (Mbs@dsDNA) based on carboxylated modified magnetic beads incubated with NH2-polyA and then hybridized with polyT-glyphosate aptamer and complementary DNA. Afterwards, a quantitative detection method based on qPCR was established. When the glyphosate aptamer on Mbs@dsDNA specifically recognizes glyphosate, complementary DNA is released and then enters the qPCR signal amplification process. The linear range of the method was 0.6 µmol/L−30 mmol/L and the detection limit was set at 0.6 µmol/L. The recoveries in tap water ranged from 103.4 to 104.9% and the relative standard deviations (RSDs) were <1%. The aptamer proposed in this study has good potential for recognizing glyphosate. The detection method combined with qPCR might have good application prospects in detecting and supervising other pesticide residues.

Preparation of flower-like molybdenum disulfide for solid-phase extraction of N-nitrosoamines in environmental water samples.

In this paper, a flower-like molybdenum disulfide material was prepared by hydrothermal method and was first used as adsorbents in the solid-phase extraction process for enriching N-nitrosoamines. Molybdenum disulfide exhibited three-dimensional petal-like microspheres with about 500 nm in diameter. The relevant analyte extraction and elution parameters (sample volumes, solution pH, washing solvents, elution solvents, and elution volumes) were optimized to improve the solid-phase extraction efficiency. The solid-phase extraction process coupled with high-performance liquid chromatography-tandem mass spectrometry for determining N-nitrosoamines in environmental water samples was established. The limits of detection were in the range of 0.01-0.05 ng/mL. The satisfactory recoveries (68.9-106.1%) were obtained at three different spiked concentrations (2, 5, and 8 ng/mL) in water samples, and the relative standard deviations were between 1.96 and 8.38%. This proposed method not only showed high sensitivity and good reusability but also provided a new adsorbent for enriching trace N-nitrosoamines in environmental water samples.

Simultaneous determination of pinoxaden, cloquintocet-mexyl, clodinafop-propargyl ester and its major metabolite in barley products and soil using QuEChERS modified with multi-walled carbon nanotubes coupled with LC-MS/MS.

Herein, a modified quick, easy, cheap, effective, rugged, and safe (QuEChERS) method with multi-walled carbon nanotube (MWCNT) as a dispersive solid-phase extraction was developed for simultaneous determination of pinoxaden (PXD), cloquintocet-mexyl (CLM), clodinafop-propargyl ester (CPE) and its major metabolite (clodinafop, CP) in barley grass powder, barley grain, and soil using liquid chromatography-tandem mass spectrometry (LC-MS/MS). We found that MWCNT as an absorbent could improve the recoveries of the tested analytes, particularly CP, in complex matrices. Under the optimum conditions, the established MWCNT-modified QuEChERS coupled with LC-MS/MS method exhibited excellent linearity (R2 ) of ≥0.9912, low limits of detection (LODs) and quantification (LOQs) of 0.02-0.07 and 0.29-1.26 µg kg-1 , and acceptable recoveries of 80-130% with intra- and inter-day relative standard deviations (RSDs) < 10.5%. No strong matrix effect (ME) has been observed on the respective samples. The method was successfully applied to monitor the tested analytes in the representative field incurred samples. Conclusively, the proposed method is sensitive and reliable and could be used to monitor the residues of PDX, CLM, CPE, and CP in complicated agro-products and soil matrices.

A competitive immunoassay for detecting triazophos based on fluorescent catalytic hairpin self-assembly.

A rapid detection method is introduced for residual trace levels of triazophos in water and agricultural products using an immunoassay based on catalytic hairpin self-assembly (CHA). The gold nanoparticle (AuNPs) surface was modified with triazophos antibody and sulfhydryl bio-barcode, and an immune competition reaction system was established between triazophos and its ovalbumin-hapten (OVA-hapten). The bio-barcode served as a catalyst to continuously induce the CHA reaction to achieve the dual signal amplification. The method does not rely on the participation of enzymes, and the addition of fluorescent materials in the last step avoids interfering factors, such as a fluorescence burst. The emitted fluorescence was detected at 489/521 nm excitation/emission wavelengths. The detection range of the developed method was 0.01-50 ng/mL for triazophos, and the limit of detection (LOD) was 0.0048 ng/mL. The developed method correlates well with the results obtained by LC-MS/MS, with satisfactory recovery and sensitivity. In sum, the designed method is reliable and provides a new approach to detect pesticide residues rapidly and quantitatively.

Magnetic Relaxation Switching Immunoassay Based on Hydrogen Peroxide-Mediated Assembly of Ag@Au-Fe3 O4 Nanoprobe for Detection of Aflatoxin B1.

Magnetic relaxation switching (MRS) sensors have shown great potential in food safety monitoring due to their high signal-to-noise ratio and simplicity, but they often suffer from insufficient sensitivity and stability due to the lack of excellent magnetic nanoprobes. Herein, dumbbell-like Au-Fe3 O4 nanoparticles are designed as magnetic nanoprobes for developing an aflatoxin B1-MRS immunosensor. The Fe3 O4 portion in the Au-Fe3 O4 nanoparticles functions as the magnetic probe to provide transverse relaxation signals, while the Au segments serve as a bridge to grow Ag shell and assemble the Au-Fe3 O4 nanoparticles, thus modulating transverse relaxation time of surrounding water molecular. The formation of Ag@Au-Fe3 O4 is triggered by hydrogen peroxide. After degraded by horseradish peroxidase, hydrogen peroxide reduces Ag+ to Ag nanoparticles which assemble dispersed Au-Fe3 O4 to aggregated Ag@Au-Fe3 O4 , thus dramatically improving the sensitivity of traditional MRS sensor. Combined with competitive immunoreaction, this Ag@Au-Fe3 O4 -MRS immunosensor can detect aflatoxin B1 with a high sensitivity (3.81 pg mL-1 ), which improved about 21 folds and 9 folds than those of enzyme-linked immunosorbent assay and high-performance liquid chromatography (HPLC), respectively. The good consistency with HPLC in real samples detection indicates the good accuracy of this immunosensor. This Ag@Au-Fe3 O4 -MRS immunosensor offers an attractive tool for detection of harmful substances.

Sensitive SERS assay for glyphosate based on the prevention of l-cysteine inhibition of a Au-Pt nanozyme.

Herein, an indirect SERS sensing assay was developed for the determination of glyphosate (Gly) in tap water. The mechanism of detection was based on relieving the inhibitory effect of l-cysteine (l-cys) on a Au-Pt nanozyme by combining Gly with l-cys through divalent copper ions (Cu2+). In this method, a novel nano-chain-like Au-Ag composite with good repeatability was successfully fabricated to detect SERS signals of oxTMB without disturbing TMB Raman signals. Under optimal conditions, the SERS signal intensity of oxTMB (at 1605 cm-1) was proportional to the concentration of Gly. The results showed a good linear response over the concentration ranges of 10 µg L-1 to 1000 mg L-1. The limit of detection and limit of quantitation of Gly were found to be 5 µg L-1 and 10 µg L-1, respectively. In addition, good anti-interference ability against interfering cations and structural analogues deserves to be mentioned. This SERS assay can be used for detection of Gly in tap water that can meet the needs of practical detection.

Magnetic molecularly imprinted specific solid-phase extraction for determination of dihydroquercetin from Larix griffithiana using HPLC.

The naturally occurring quercetin flavonoid, dihydroquercetin, is widely distributed in plant tissues and has a variety of biological activities. Herein, a magnetic molecularly imprinted solid-phase extraction was tailor made for selective determination of dihydroquercetin in Larix griffithiana using high-performance liquid chromatography. Amino-functionalized core-shell magnetic nanoparticles were prepared and characterized using scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometry, and infrared spectroscopy. The polymer had an average diameter of 250 ± 2.56 nm and exhibited good stability and adsorption for template molecule, which is enriched by hydrogen bonding interaction. Multiple factors for extraction, including loading, washing, elution solvents, and extraction time, were optimized. The limit of detection was 1.23 µg/g. The precision determined at various concentration of dihydroquercetin was less than 4% and the mean recovery was between 74.64 and 101.80%. It has therefore been shown that this protocol can be used as an alternative extraction to quantify dihydroquercetin in L. griffithiana and purify quercetin flavonoid from other complex matrices.

A "half" core-shell magnetic nanohybrid composed of zeolitic imidazolate framework and graphitic carbon nitride for magnetic solid-phase extraction of sulfonylurea herbicides from water samples followed by LC-MS/MS detection.

A "half" core-shell g-C3N4/Fe3O4@ZIF-8 nanohybrid, in which Fe3O4 and zeolite imidazolate framework-8 (ZIF-8) constructed the core-shell structure, was successfully fabricated via a versatile in situ growth strategy. This nanohybrid was employed for simultaneous magnetic solid-phase extraction (MSPE) of trace levels of fifteen target sulfonylurea herbicides (SUHs) in environmental water samples followed by LC-MS/MS detection. C3N4 nanosheets were first prepared by liquid exfoliation of bulk g-C3N4, after which Fe3O4 nanoparticles were uniformly deposited onto the surface of C3N4 nanosheets, and ZIF-8 nanoparticles were grown on the surface of g-C3N4/Fe3O4 by anchoring Zn2+ on g-C3N4/Fe3O4. Owing to the synergistic effect, the hybridization of C3N4 and ZIF-8 endowed the nanohybrid with higher multi-target adsorption ability for SUHs compared to pure C3N4 or ZIF-8. The separation as well as the enrichment processes were facilitated using Fe3O4 as a magnetic core. The influence of various parameters on MSPE efficiency, including adsorbent dosage, extraction time, solution pH, and desorption solvent and its volume, was investigated in detail. Under optimal conditions, the MSPE coupled with LC-MS/MS exhibited good linearity ranging from 0.5 to 100 µg L-1 with correlation coefficients (R2) ≥ 0.9919, high sensitivity with low limits of detection (LODs) of 0.005-0.141 µg L-1 and satisfactory recoveries of 67.4-105.5% with relative standard deviations (RSDs) < 9.8%. These results indicate that this method is reliable for the determination of SUHs in different matrices and the in situ growth strategy is a promising approach for constructing effective adsorbents. Graphical abstract Schematic representation of a "half" core-shell magnetic nanohybrid composed of zeolitic imidazolate framework (ZIF-8) and graphitic carbon nitride (g-C3N4) for magnetic solid-phase extraction (MSPE) of trace level determination of fifteen sulfonylurea herbicides (SUHs) in environmental water samples using LC-MS/MS detection.

Dissipation pattern and residual levels of boscalid in cucumber and soil using liquid chromatography-tandem mass spectrometry.

To stipulate the rationale of spraying doses and to determine the safe interval period of boscalid suspension concentrate (SC), the degradation dynamics and residual levels were investigated in cucumber and soil using liquid chromatography-tandem mass spectrometry (LC-MS/MS). Field trials were conducted according to Chinese Guideline on pesticide residue trials. Following application, the degradation kinetics was best ascribed to first-order kinetic models with half-life of 2.67-9.90 d in cucumber. Spraying boscalid SC at 1.5-fold the recommended dosage yield terminal residues, which are clearly lower than the maximum residue limit (MRL) established by China (MRL =5 mg.kg-1) in cucumber. At variance, the dissipation dynamics in soil did not fit to first-order kinetics and the half-life was more than 17 days, the finding which denotes that the degradation behavior of boscalid in soil proceeds slowly. It has therefore been shown that boscalid is safe for use on cucumbers under the recommended dosage.

A Magnetic Zeolitic Imidazolate Framework Nanohybrid for Fast and Efficient Extraction of Clothianidin, Imidacloprid, Acetamiprid, and Thiacloprid in Water.

A magnetic zeolitic imidazolate framework nanohybrid (Fe3O4/ZIF-8) was synthesized and applied as an efficient magnetic solid-phase extraction (MSPE) adsorbent for fast adsorption and separation of clothianidin, imidacloprid, acetamiprid, and thiacloprid from various water samples. Fe3O4 and ZIF-8 were combined via a simple modified in situ method and the obtained nanohybrid (Fe3O4/ZIF-8) showed both excellent adsorption capacity and convenient magnetic property. ZIF-8 was found to play a dominant role in adsorbing the analytes and π-π interaction was found to be the main adsorption mechanism of analytes by Fe3O4/ZIF-8. Parameters affecting the MSPE efficiency, such as the Fe3O4 amount loaded onto the ZIF-8, salt and pH of the sample solution, extraction time, and the type and volume of desorption solvent, were systematically evaluated. Under the optimum conditions, the developed MSPE coupled with LC-MS/MS achieved good linearities (R² > 0.9940) in the range of 10-800 µg L-1 with low limits of detection (0.03-0.3 µg L-1) and satisfactory recoveries of 79.5-108.2% with relative standard deviations (RSDs) <10%. The method was successfully applied to monitor various water samples and conclusively highlighted the excellent flexibility and practicability of Fe3O4/ZIF-8 for analyzing emerging environmental contaminants in various types of water samples.

Correction to: A molecularly imprinted polymer with integrated gold nanoparticles for surface enhanced Raman scattering based detection of the triazine herbicides, prometryn and simetryn.

The published version of this article, unfortunately, contains error. Author name was corrected as "A. M. Abd EI-Aty" - upper case of "i" in "EI-Aty", instead of "A. M. Abd El-Aty" - lower case of "L". Given in this paper is the correct author name.

A molecularly imprinted polymer with integrated gold nanoparticles for surface enhanced Raman scattering based detection of the triazine herbicides, prometryn and simetryn.

A class-specific molecular imprinted polymer (MIP) is described for simultaneous recognition of prometryn and simetryn prior to their determination via a fingerprint signal (at 974 cm-1 and 1074 cm-1) in the surface enhanced Raman scattering (SERS) spectra that were acquired in the presence of gold nanoparticles. The imprinted nanoparticles were applied to the analysis of rice and wheat samples spiked with both herbicides. The method has fairly good recoveries (72.7-90.9%) with a relative standard deviation of 1.7-7.8%, and a 20 µg·kg-1 limit of detection. The imprint factors (compared to non-imprinted polymers) are 5.3 for prometryn and 4.2 for simetryn (both at 10 µg·mL-1 of the initial solution). Graphical abstract A MIP-SERS method was developed for simultaneous detection of triazine herbicides (prometryn and simetryn) in food samples.

A disposable electrochemical sensor based on electrospinning of molecularly imprinted nanohybrid films for highly sensitive determination of the organotin acaricide cyhexatin.

Nanofibrous polyporous membranes imprinted with cyhexatin (CYT) were formed via the ordered distribution of the imprints in electrospun nanofibers. The MIPs have a high mass transfer rate and enhanced adsorption capacity. In addition, a printed carbon electrode with enhanced sensitivity was developed via electrochemical fabrication of reduced graphene oxide (rGO) and gold nanoparticles (AuNPs). The molecularly imprinted sensor exhibits excellent selectivity and sensitivity for CYT. The structure and morphology of the nanohybrid films were characterized by using scanning electron microscopy, atomic force microscopy and chronoamperometry. The sensing performances were evaluated by cyclic voltammetry, differential pulse voltammetry and electrochemical impedance spectroscopy by using hexacyanoferrate(IV) as an electrochemical probe. The electrode, best operated at a working potential of around 0.16 V (vs. Ag/AgCl), has a linear response in the 1-800 ng mL-1 CYT concentration range and a detection limit of 0.17 ng mL-1 (at S/N = 3). The sensor demonstrated satisfactory recoveries when applied to the determination of CYT in spiked pear samples. Graphical abstract Schematic presentation of the electrochemical sensor for detection of CYT.

Rapid colorimetric determination of the pesticides carbofuran and dichlorvos by exploiting their inhibitory effect on the aggregation of peroxidase-mimicking platinum nanoparticles.

A novel and highly sensitive enzyme inhibition assay was developed for the rapid detection of the organophosphate pesticide dichlorvos and the carbamate pesticide carbofuran. It achieves signal amplification by the secondary catalysis of platinum nanoparticles. Acetylcholinesterase (AChE) is capable of catalyzing the hydrolysis of acetylthiocholine to form thiocholine. Thiocholine causes the aggregation of citrate-capped platinum nanoparticles which then lose their peroxidase-mimicking properties. After addition of pesticides, the activity of AChE is inhibited, less thiocholine is produced, less aggregation occurs, and the peroxidase-mimetic properties are increasingly retained. In the presence of tetramethylbenzidine and H2O2, a deep blue coloration with an absorption maximum at 650 nm will be formed. The assay was applied to the determination of dichlorvos and carbofuran, and detection limits of 2.3 µg·L-1 and 1.4 µg·L-1 were obtained, respectively. Recovery experiments with spiked tap water and pears gave satisfactory relative standard deviations. Graphical abstract The blue product formed by platinum nanoparticle-catalyzed oxidation of 3,3'5,5'-tetramethylbenzidine (TMB) by H2O2 is reduced if acetylthiocholine (ATCh) is hydrolyzed by acetylcholinesterase (AChE) to form thiocholine. However, if AChE is inhibited by pesticides, color formation will recover.

Branch-Migration Based Fluorescent Probe for Highly Sensitive Detection of Mercury.

Detection of heavy metals is of great importance for food safety and environmental analysis. Among various heavy metal ions, mercury ion is one of the most prevalent species. The methods for detection of mercury were numerous, and the T-Hg-T based assay was promising due to its simplicity and compatibility. However, traditional T-Hg-T based methods mainly relied on multiple T-Hg-T to produce enough conformational changes for further detection, which greatly restrained the limit of detection. Hence, we established a branch-migration based fluorescent probe and found that single T-Hg-T could produce strong signals. The sensing mechanism of our method in different reaction modes was explored, and the detection limits were determined to be 18.4 and 14.7 nM in first-order reaction mode and mixed reaction mode, respectively. Moreover, coupled with Endonuclease IV assisted signal amplification, the detection limit could be 1.2 nM, lower than most DNA based fluorometric assays. For practicability, the specificity of our assay toward different interfering ions was investigated and detection of Hg2+ in deionized water and lake water was also achieved with similar recoveries compared to those of atomic fluorescence spectrometry, which demonstrated the practicability of our method in real samples. Definitely, the proposed branch migration probe would be a promising substitution for current DNA probes based on recognition of multiple T-Hg-T and we anticipate it to be widely adopted in food and environmental analysis.

Fabrication of a highly sensitive electrochemical sensor based on electropolymerized molecularly imprinted polymer hybrid nanocomposites for the determination of 4-nonylphenol in packaged milk samples.

Herein, an imprinted electrochemical sensor based on graphene-Au nanoparticles incorporated with molecularly imprinted polymer (MIP) was fabricated for determination of 4-nonylphenol (4-NP). Grafted MIP electropolymerized on nanoscale multilayer films electrode was achieved using 4-NP as a template and P-aminothiophenol as a functional monomer. The electrochemical properties of the MIP nanoscale multilayer membrances were characterized and measured by cyclic voltammetry and differential pulse voltammetry techniques; using ferrocyanide/ferricyanide-redox marker. Several important parameters were optimized and investigated to improve the performance of the sensor. Under the optimized conditions, the developed sensor showed an excellent linear response over the concentration ranges of 50-500 ng mL-1 (4-NP) with a detection limit of 0.01 ng mL-1(S/N = 3). The developed sensor showed a good selective recognition of 4-NP compared with structural analogue, exhibited a good reproducibility and accuracy with long-term stability. At last, the feasibility of the proposed methodology was successfully applied fordetection of 4-NP in milk and its packaging materials.