Sustainable preparation of 2-acylbenzothiazoles under the cooperation of ionic liquids and microwave irradiation.

Microwave irradiation (MW) and ionic liquids (ILs) are two of the most promising relatively greener synthetic approaches to preparing value-added chemicals. Herein, a series of 2-acylbenzothiazole derivatives were synthesized for the first time from commercially available α-bromoacetophenones and disulfane-diyl-dianilines through the cooperation of ionic liquids and microwave irradiation under metal- and extra-additives-free conditions. A plausible mechanism involving the successive IL-induced enolation has been proposed.

Visible Wavelength Color Filters Using Dielectric Subwavelength Gratings for Backside-Illuminated CMOS Image Sensor Technologies.

We report transmissive color filters based on subwavelength dielectric gratings that can replace conventional dye-based color filters used in backside-illuminated CMOS image sensor (BSI CIS) technologies. The filters are patterned in an 80 nm-thick poly silicon film on a 115 nm-thick SiO2 spacer layer. They are optimized for operating at the primary RGB colors, exhibit peak transmittance of 60-80%, and have an almost insensitive response over a ± 20° angular range. This technology enables shrinking of the pixel sizes down to near a micrometer.

Facile preparation of visible light-sensitive layered g-C3N4 for photocatalytic removal of organic pollutants.

The graphite-phase carbon nitride (g-C3N4) photocatalytic materials were prepared by one-step calcination method to degrade methylene blue (MB) and potassium butyl xanthate (PBX) under visible light irradiation. The prepared g-C3N4 photocatalytic materials were investigated in detail by various characterizations, and the experiments showed that the graphitic phase carbon nitride photocatalytic materials were successfully prepared by the one-step calcination method. The material possesses excellent optical properties and strong visible light absorption, thus achieving photocatalytic degradation of MB and PBX. The catalyst dosage, pH, the initial concentration of pollutants have important effects on photocatalytic activity of MB and PBX. The photocatalytic degradation efficiency was 98.99% for MB and 96.83% for PBX under the optimal conditions (catalyst dosage, initial pollutant concentration and pH value were 500 mg L-1, 20 mg L-1 and 7, respevtively). The photocatalytic mechanisms on MB and PBX were elucidated. ·OH was the key specie for MB, while ·O2- was the key specie for PBX. This study advances the development of photocatalytic technology for mineral wastewater.

Illumination estimation via thin-plate spline interpolation.

Thin-plate spline interpolation is used to interpolate the chromaticity of the color of the incident scene illumination across a training set of images. Given the image of a scene under unknown illumination, the chromaticity of the scene illumination can be found from the interpolated function. The resulting illumination-estimation method can be used to provide color constancy under changing illumination conditions and automatic white balancing for digital cameras. A thin-plate spline interpolates over a nonuniformly sampled input space, which in this case is a training set of image thumbnails and associated illumination chromaticities. To reduce the size of the training set, incremental k medians are applied. Tests on real images demonstrate that the thin-plate spline method can estimate the color of the incident illumination quite accurately, and the proposed training set pruning significantly decreases the computation.

Production of polyhydroxyalkanoate from acetate by metabolically engineered Aeromonas hydrophilia.

Aeromonas hydrophila 4AK4 normally produces the copolymer of 3-hydroxybutyrate and 3-hydroxyhexanoate (PHBHHx) using lauric acid as the carbon source. In this study we reported the metabolic engineering of A. hydrophila 4AK4 for the production of polyhydroxyalkanoate (PHA) using acetate as a main carbon source. Recombinant A. hydrophila overexpressing ß-ketothiolase and acetoacetyl-CoA reductase could accumulate poly-3-hydroxybutyrate (PHB) from acetate with a polymer content of 1.39 wt%. Further overexpression of acetate kinase/phosphotransacetylase and acetyl-CoA synthetase improved PHB content to 8.75 wt% and 19.82 wt%, respectively. When acetate and propionate were simultaneously supplied as carbon sources, the engineered A. hydrophila overexpressing ß-ketothiolase, acetoacetyl-CoA reductase, and acetyl-CoA synthetase was found able to produce the copolymer of 3-hydroxybutyrate and 3-hydroxyvalerate (PHBV). The recombinant grew to 3.79 g/L cell dry weight (CDW) containing 15.02 wt% PHBV. Our proposed metabolic engineering strategies illustrate the feasibility for producing PHA from acetate by A. hydrophila.

Providing a Single Ground-Truth for Illuminant Estimation for the ColorChecker Dataset.

The ColorChecker dataset is one of the most widely used image sets for evaluating and ranking illuminant estimation algorithms. However, this single set of images has at least 3 different sets of ground-truth (i.e., correct answers) associated with it. In the literature it is often asserted that one algorithm is better than another when the algorithms in question have been tuned and tested with the different ground-truths. In this short correspondence we present some of the background as to why the 3 existing ground-truths are different and go on to make a new single and recommended set of correct answers. Experiments reinforce the importance of this work in that we show that the total ordering of a set of algorithms may be reversed depending on whether we use the new or legacy ground-truth data.

[Microbial production of poly (glycolate-co-lactate-co-3-hydroxybutyrate) from glucose and xylose by Escherichia coli].

Escherichia coli was metabolically engineered to produce poly(glycolate-co-lactate-co-3-hydroxybutyrate) using glucose and xylose as carbon sources. The combinatorial biosynthetic route was constructed by the overexpression of a series of enzymes including D-tagatose 3-epimerase, L-fuculokinase, L-fuculose-phosphate aldolase, aldehyde dehydrogenase, propionyl-CoA transferase, ß-ketothiolase, acetoacetyl-CoA reductase, and polyhydroxyalkanoate synthase. Overexpression of polyhydroxyalkanoate granule associated protein significantly improved biopolymer synthesis, and the recombinant strain reached 3.73 g/L cell dry weight with 38.72% (W/W) biopolymer content. A co-culture engineering strategy was developed to produce biopolymer from a mixture of glucose and xylose, achieving 4.01 g/L cell dry weight containing 21.54% (W/W) biopolymer. The results of this work offer an approach for simultaneously utilizing glucose and xylose and indicate the potential for future biopolymer production from lignocellulosic biomass.