Through-mask anodization of titania dot- and pillar-like nanostructures on bulk Ti substrates using a nanoporous anodic alumina mask.

Nanosized surface topography on an implant material has the capability of stimulating the acceptance of the material in its host surrounding. Fine-tuning of nanotopography feature size has been shown to trigger differentiation of mesenchymal stem cells into bone cells in vitro. For this purpose we have created well defined nanosized titania dot- and pillar-like structures on mechanically polished Ti substrates using a through-mask anodization technique with an anodic porous alumina template. The anodization technique allowed the titania structure dimensions to be precisely tuned in the range 15-140 nm in a single electrolyte system. The fabricated surfaces serve as good model surfaces for precise studies of in vitro cell behaviour. The through-mask anodization technique was used directly on bulk Ti surfaces, thus demonstrating a potential application for patterning of actual Ti implant surfaces.

Harnessing Nanotopography to Enhance Osseointegration of Clinical Orthopedic Titanium Implants-An in Vitro and in Vivo Analysis.

Despite technological advancements, further innovations in the field of orthopedics and bone regeneration are essential to meet the rising demands of an increasing aging population and associated issues of disease, injury and trauma. Nanotopography provides new opportunities for novel implant surface modifications and promises to deliver further improvements in implant performance. However, the technical complexities of nanotopography fabrication and surface analysis have precluded identification of the optimal surface features to trigger osteogenesis. We herein detail the osteoinductive potential of discrete nanodot and nanowire nanotopographies. We have examined the ability of modified titanium and titanium alloy (Ti64) surfaces to induce bone-specific gene activation and extracellular matrix protein expression in human skeletal stem cells (SSCs) in vitro, and de novo osteogenic response within a murine calvarial model in vivo. This study provides evidence of enhanced osteogenic response to nanowires 300 surface modifications, with important implications for clinical orthopedic application.

Gelatin freeze casting of biomimetic titanium alloy with anisotropic and gradient pore structure.

Titanium is a material commonly used for dental and orthopaedic implants. However, due to large differences in properties between the titanium metal and the natural bone, stress shielding has been observed in the surrounding area, resulting in bone atrophy, and thus has raised concerns of the use of this material. Ideally implant materials should possess similar properties to the surrounding tissues in order to distribute the load as the joint would naturally, while also possessing a similar porous structure to the bone to enable interaction with the surrounding material. In this paper we report the formation of aligned porous titanium alloy scaffolds with the use of unidirectional freeze casting with a temperature gradient. The resulting scaffolds had a dense bottom part with sufficient strength for loading, while the top part remaining porous in order to allow bone growth in the scaffold and fully integrating with the surrounding tissue. The anisotropic nature of the pores within the titanium alloy samples were observed via micro computed tomography, where a gradient structure similar to bone was observed. The compressive strength of the fabricated scaffolds was found to be up to 427 MPa when measured with the pores aligned with the applied load, depending on the pore density. This is within the range of cortical bone.

Analysis of Osteoclastogenesis/Osteoblastogenesis on Nanotopographical Titania Surfaces.

A focus of orthopedic research is to improve osteointegration and outcomes of joint replacement. Material surface topography has been shown to alter cell adhesion, proliferation, and growth. The use of nanotopographical features to promote cell adhesion and bone formation is hoped to improve osteointegration and clinical outcomes. Use of block-copolymer self-assembled nanopatterns allows nanopillars to form via templated anodization with control over height and order, which has been shown to be of cellular importance. This project assesses the outcome of a human bone marrow-derived co-culture of adherent osteoprogenitors and osteoclast progenitors on polished titania and titania patterned with 15 nm nanopillars, fabricated by a block-copolymer templated anodization technique. Substrate implantation in rabbit femurs is performed to confirm the in vivo bone/implant integration. Quantitative and qualitative results demonstrate increased osteogenesis on the nanopillar substrate with scanning electron microscopy, histochemical staining, and real-time quantitative reverse-transcription polymerase chain reaction analysis performed. Osteoblast/osteoclast co-culture analysis shows an increase in osteoblastogenesis-related gene expression and reduction in osteoclastogenesis. Supporting this in vitro finding, in vivo implantation of substrates in rabbit femora indicates increased implant/bone contact by ≈20%. These favorable osteogenic characteristics demonstrate the potential of 15 nm titania nanopillars fabricated by the block-copolymer templated anodization technique.

Cicada-inspired cell-instructive nanopatterned arrays.

Biocompatible surfaces hold key to a variety of biomedical problems that are directly related to the competition between host-tissue cell integration and bacterial colonisation. A saving solution to this is seen in the ability of cells to uniquely respond to physical cues on such surfaces thus prompting the search for cell-instructive nanoscale patterns. Here we introduce a generic rationale engineered into biocompatible, titanium, substrates to differentiate cell responses. The rationale is inspired by cicada wing surfaces that display bactericidal nanopillar patterns. The surfaces engineered in this study are titania (TiO2) nanowire arrays that are selectively bactericidal against motile bacteria, while capable of guiding mammalian cell proliferation according to the type of the array. The concept holds promise for clinically relevant materials capable of differential physico-mechanical responses to cellular adhesion.

Investigation of the limits of nanoscale filopodial interactions.

Mesenchymal stem cells are sensitive to changes in feature height, order and spacing. We had previously noted that there was an inverse relationship between osteoinductive potential and feature height on 15-, 55- and 90 nm-high titania nanopillars, with 15 nm-high pillars being the most effective substrate at inducing osteogenesis of human mesenchymal stem cells. The osteoinductive effect was somewhat diminished by decreasing the feature height to 8 nm, however, which suggested that there was a cut-off point, potentially associated with a change in cell-nanofeature interactions. To investigate this further, in this study, a scanning electron microscopy/three-dimensional scanning electron microscopy approach was used to examine the interactions between mesenchymal stem cells and the 8 and 15 nm nanopillared surfaces. As expected, the cells adopted a predominantly filopodial mode of interaction with the 15 nm-high pillars. Interestingly, fine nanoscale membrane projections, which we have termed 'nanopodia,' were also employed by the cells on the 8 nm pillars, and it seems that this is analogous to the cells 'clinging on with their fingertips' to this scale of features.

Scanning electron microscopical observation of an osteoblast/osteoclast co-culture on micropatterned orthopaedic ceramics.

In biomaterial engineering, the surface of an implant can influence cell differentiation, adhesion and affinity towards the implant. On contact with an implant, bone marrow-derived mesenchymal stromal cells demonstrate differentiation towards bone forming osteoblasts, which can improve osteointegration. The process of micropatterning has been shown to improve osteointegration in polymers, but there are few reports surrounding ceramics. The purpose of this study was to establish a co-culture of bone marrow-derived mesenchymal stromal cells with osteoclast progenitor cells and to observe the response to micropatterned zirconia toughened alumina ceramics with 30 µm diameter pits. The aim was to establish whether the pits were specifically bioactive towards osteogenesis or were generally bioactive and would also stimulate osteoclastogenesis that could potentially lead to osteolysis. We demonstrate specific bioactivity of micropatterns towards osteogenesis, with more nodule formation and less osteoclastogenesis compared to planar controls. In addition, we found that that macrophage and osteoclast-like cells did not interact with the pits and formed fewer full-size osteoclast-like cells on the pitted surfaces. This may have a role when designing ceramic orthopaedic implants.

2D and 3D nanopatterning of titanium for enhancing osteoinduction of stem cells at implant surfaces.

The potential for the use of well-defined nanopatterns to control stem cell behaviour on surfaces has been well documented on polymeric substrates. In terms of translation to orthopaedic applications, there is a need to develop nanopatterning techniques for clinically relevant surfaces, such as the load-bearing material titanium (Ti). In this work, a novel nanopatterning method for Ti surfaces is demonstrated, using anodisation in combination with PS-b-P4VP block copolymer templates. The block copolymer templates allows for fabrication of titania nanodot patterns with precisely controlled dimensions and positioning which means that this technique can be used as a lithography-like patterning method of bulk Ti surfaces on both flat 2D and complex shaped 3D surfaces. In vitro studies demonstrate that precise tuning of the height of titania nanodot patterns can modulate the osteogenic differentiation of mesenchymal stem cells. Cells on both the 8 nm and 15 nm patterned surfaces showed a trend towards a greater number of the large, super-mature osteogenic focal adhesions than on the control polished Ti surface, but the osteogenic effect was more pronounced on the 15 nm substrate. Cells on this surface had the longest adhesions of all and produced larger osteocalcin deposits. The results suggest that nanopatterning of Ti using the technique of anodisation through a block copolymer template could provide a novel way to enhance osteoinductivity on Ti surfaces.

Titanium nanofeaturing for enhanced bioactivity of implanted orthopedic and dental devices.

Titanium (Ti) is used as a load-bearing material in the production of orthopedic devices. The clinical efficacy of these implants could be greatly enhanced by the addition of nanofeatures that would improve the bioactivity of the implants, in order to promote in situ osteo-induction and -conduction of the patient's stem and osteoprogenitor cells, and to enhance osseointegration between the implant and the surrounding bone. Nanofeaturing of Ti is also currently being applied as a tool for the biofunctionalization of commercially available dental implants. In this review, we discuss the different nanofabrication strategies that are available to generate nanofeatures in Ti and the cellular response to the resulting nanofeatures. In vitro research, in vivo studies and clinical trials are considered, and we conclude with a perspective about the future potential for use of nanotopographical features in a therapeutic setting.

Embossing of micropatterned ceramics and their cellular response.

The aim of this work is to investigate the use of microtopographies in providing physical cues to modulate the cellular response of human mesenchymal stem cells on ceramics. Two microgrooved patterns (100 µm/50 µm, 10 µm/10 µm groove/pitch) were transcribed reversely onto alumina green ceramic tapes via an embossing technique followed by sintering. Characterization of the micropatterned alumina surfaces and their cellular response was carried out. Spread and polygonal cell morphologies were observed on the wider groove (50 µm/100 µm) surface. Cells seeded onto the narrow groove (10 µm/10 µm) surface aligned themselves alongside the grooves, resulting in more elongated cell morphology. More osteoid matrix nodules shown by osteopontin and osteocalcin biomarkers were detected on the larger grooved surfaces after cell culture of 21 days, indicating a greater level of osteogenicity. This study has shown that micropatterned wider groove (50 µm) topographies are more suitable surfaces for improving osseointegration of ceramic implants.

Novel anodization technique using a block copolymer template for nanopatterning of titanium implant surfaces.

Precise surface nanopatterning is a promising route for predictable control of cellular behavior on biomedical materials. There is currently a gap in taking such precision engineered surfaces from the laboratory to clinically relevant implant materials such as titanium (Ti). In this work, anodization of Ti surfaces was performed in combination with block copolymer templates to create highly ordered and tunable oxide nanopatterns. Secondary ion mass spectroscopy (SIMS) and X-ray photoelectron spectroscopy (XPS) analyses showed that the composition of the anodized structures was mainly titania with small amounts of nitrogen left from the block copolymer. It was further demonstrated that these nanopatterns can be superimposed on more complex shaped Ti surfaces such as microbeads, using the same technique. Human mesenchymal stem cells were cultured on Ti microbead surfaces, with and without nanopatterns, in vitro to study the effect of nanotopography on Ti surfaces. The results presented in this work demonstrate a promising method of producing highly defined and well-arranged surface nanopatterns on Ti implant surfaces.

Metabolomics: a valuable tool for stem cell monitoring in regenerative medicine.

Metabolomics is a method for investigation of changes in the global metabolite profile of cells. This paper discusses the technical application of the approach, considering metabolite extraction, separation, mass spectrometry and data interpretation. A particular focus is on the application of metabolomics to the study of stem cell physiology in the context of biomaterials and regenerative medicine. Case studies are used to illustrate key points, focusing on the use of metabolomics in the examination of mesenchymal stem cell responses to titania-nanopillared substrata designed for orthopaedic applications.

Skeletal stem cell physiology on functionally distinct titania nanotopographies.

Functionalisation of the surface of orthopaedic implants with nanotopographies that could stimulate in situ osteogenic differentiation of the patient's stem or osteoprogenitor cells would have significant therapeutic potential. Mesenchymal stem cell (MSC) responses to titanium substrates patterned with nanopillar structures were investigated in this study. Focal adhesions were quantified in S-phase cells, the bone-related transcription factor Runx2 was examined, osteocalcin production was noted, and Haralick computational analysis was used to assess the relatedness of the cell responses to each of the titanium substrata based on cytoskeletal textural features. Metabolomics was used as a novel means of assessing cellular responses to the biomaterial substrates by analysing the global metabolite profile of the cells on the substrata, and shows promise as a technique with high data yield for evaluating cell interactions with materials of different surface chemistry or topography. The cell response to 15 nm high nanopillars was distinct, consistent with a transition from a more quiescent phenotype on the planar substrate, to an 'active' phenotype on the pillars. These studies illustrate the potential for clinically relevant titania nanopillared substrata to modulate MSCs, with implications for orthopaedic device design and application.

The synergistic effects of lysophosphatidic acid receptor agonists and calcitriol on MG63 osteoblast maturation at titanium and hydroxyapatite surfaces.

Successful osseointegration stems from the provision of a mechanically competent mineralised matrix at the implant site. Mature osteoblasts are the cells responsible for achieving this and a key factor for ensuring healthy bone tissue is associated with prosthetic materials will be 1 alpha,25 dihydroxy vitamin D3 (calcitriol). However it is known that calcitriol per se does not promote osteoblast maturation, rather the osteoblasts need to be in receipt of calcitriol in combination with selected growth factors in order to undergo a robust maturation response. Herein we report how agonists of the lysophosphatidic acid (LPA) receptor, LPA and (2S)-OMPT, synergistically co-operate with calcitriol to secure osteoblast maturation for cells grown upon two widely used bone biomaterials, titanium and hydroxyapatite. Efforts could now be focussed on functionalizing these materials with LPA receptor agonists to support in vivo calcitriol-induced osseointegration via heightened osteoblast maturation responses.

Fabrication of pillar-like titania nanostructures on titanium and their interactions with human skeletal stem cells.

Surface nanotopography is known to influence the interaction of human skeletal (mesenchymal) stem cells (hMSC) with a material surface. While most surface nanopatterning has been performed on polymer-based surfaces there is a need for techniques to produce well-defined topography features with tuneable sizes on relevant load-bearing implant materials such as titanium (Ti). In this study titania nanopillar structures with heights of either 15, 55 or 100 nm were produced on Ti surfaces using anodization through a porous alumina mask. The influence of the surface structure heights on hMSC adhesion, spreading, cytoskeletal formation and differentiation was examined. The 15 nm high topography features resulted in the greatest cell response with bone matrix nodule forming on the Ti surface after 21 days.