Restoring fertility in yeast hybrids: Breeding and quantitative genetics of beneficial traits.

Hybrids between species can harbor a combination of beneficial traits from each parent and may exhibit hybrid vigor, more readily adapting to new harsher environments. Interspecies hybrids are also sterile and therefore an evolutionary dead end unless fertility is restored, usually via auto-polyploidisation events. In the Saccharomyces genus, hybrids are readily found in nature and in industrial settings, where they have adapted to severe fermentative conditions. Due to their hybrid sterility, the development of new commercial yeast strains has so far been primarily conducted via selection methods rather than via further breeding. In this study, we overcame infertility by creating tetraploid intermediates of Saccharomyces interspecies hybrids to allow continuous multigenerational breeding. We incorporated nuclear and mitochondrial genetic diversity within each parental species, allowing for quantitative genetic analysis of traits exhibited by the hybrids and for nuclear-mitochondrial interactions to be assessed. Using pooled F12 generation segregants of different hybrids with extreme phenotype distributions, we identified quantitative trait loci (QTLs) for tolerance to high and low temperatures, high sugar concentration, high ethanol concentration, and acetic acid levels. We identified QTLs that are species specific, that are shared between species, as well as hybrid specific, in which the variants do not exhibit phenotypic differences in the original parental species. Moreover, we could distinguish between mitochondria-type-dependent and -independent traits. This study tackles the complexity of the genetic interactions and traits in hybrid species, bringing hybrids into the realm of full genetic analysis of diploid species, and paves the road for the biotechnological exploitation of yeast biodiversity.

Physiological and transcriptomic response of Saccharomyces pastorianus to cold storage.

Removal of yeast biomass at the end of fermentation, followed by a period of storage before re-inoculation into a subsequent fermentation, is common in the brewing industry. Storage is typically conducted at cold temperatures to preserve yeast quality, a practice which has unfavourable cost and environmental implications. To determine the potential for alleviating these effects, the transcriptomic and physiological response of Saccharomyces pastorianus strain W34/70 to standard (4°C) and elevated (10°C) storage temperatures was explored. Higher temperatures resulted in increased expression of genes associated with the production and mobilisation of intracellular glycogen, trehalose, glycerol and fatty acids, although these observations were limited to early stages of storage. Intracellular trehalose and glycerol concentrations were higher at 4°C than at 10°C, as a consequence of the cellular response to cold stress. However, significant changes in glycogen degradation or cellular fatty acid composition did not occur between the two sets of populations, ensuring that cell viability remained consistent. It is anticipated that this data may lead to changes in standard practice for handling yeast cultures, without compromising yeast quality. This work has significance not only for the brewing industry, but also for food and biofuel sectors requiring short-term storage of liquid yeast.

Phenotypic characterisation of Saccharomyces spp. yeast for tolerance to stresses encountered during fermentation of lignocellulosic residues to produce bioethanol.

BACKGROUND: During industrial fermentation of lignocellulose residues to produce bioethanol, microorganisms are exposed to a number of factors that influence productivity. These include inhibitory compounds produced by the pre-treatment processes required to release constituent carbohydrates from biomass feed-stocks and during fermentation, exposure of the organisms to stressful conditions. In addition, for lignocellulosic bioethanol production, conversion of both pentose and hexose sugars is a pre-requisite for fermentative organisms for efficient and complete conversion. All these factors are important to maximise industrial efficiency, productivity and profit margins in order to make second-generation bioethanol an economically viable alternative to fossil fuels for future transport needs. RESULTS: The aim of the current study was to assess Saccharomyces yeasts for their capacity to tolerate osmotic, temperature and ethanol stresses and inhibitors that might typically be released during steam explosion of wheat straw. Phenotypic microarray analysis was used to measure tolerance as a function of growth and metabolic activity. Saccharomyces strains analysed in this study displayed natural variation to each stress condition common in bioethanol fermentations. In addition, many strains displayed tolerance to more than one stress, such as inhibitor tolerance combined with fermentation stresses. CONCLUSIONS: Our results suggest that this study could identify a potential candidate strain or strains for efficient second generation bioethanol production. Knowledge of the Saccharomyces spp. strains grown in these conditions will aid the development of breeding programmes in order to generate more efficient strains for industrial fermentations.

The two faces of microorganisms in traditional brewing and the implications for no- and low-alcohol beers.

The production of alcoholic beverages is intrinsically linked to microbial activity. This is because microbes such as yeast are associated with the production of ethanol and key sensorial compounds that produce desirable qualities in fermented products. However, the brewing industry and other related sectors face a step-change in practice, primarily due to the growth in sales of no- and low-alcohol (NoLo) alternatives to traditional alcoholic products. Here we review the involvement of microbes across the brewing process, including both their positive contributions and their negative (spoilage) effects. We also discuss the opportunities for exploiting microbes for NoLo beer production, as well as the spoilage risks associated with these products. For the latter, we highlight differences in composition and process conditions between traditional and NoLo beers and discuss how these may impact the microbial ecosystem of each product stream in relation to microbiological stability and final beer quality.

Malt-induced premature yeast flocculation: current perspectives.

Premature yeast flocculation (PYF) is a sporadic problem for the malting and brewing industries which can have significant financial and logistical implications. The condition is characterised by abnormally heavy (and sometimes early) flocculation of yeast during brewery fermentations. The resulting low suspended yeast cell counts towards the end of the fermentation can result in flavour defects and incomplete attenuation (fermentation of sugars to alcohol). Despite several decades of research into the phenomenon, its precise nature and mechanisms have not been fully elucidated. In part this is because the term PYF has become a 'catch-all' syndrome which can have multiple origins. Furthermore, there are complex interactions in the malting and brewing processes which together mean that the PYF status of a malt sample is hard to predict at a generic level. Whether or not PYF is observed depends not only on barley quality, but on process factors in the maltings and to a substantial extent on the brewing yeast strain concerned. This article highlights the significance of PYF, and reviews current knowledge relating to the origins of this complex phenomenon.

Yeast responses to stresses associated with industrial brewery handling.

During brewery handling, production strains of yeast must respond to fluctuations in dissolved oxygen concentration, pH, osmolarity, ethanol concentration, nutrient supply and temperature. Fermentation performance of brewing yeast strains is dependent on their ability to adapt to these changes, particularly during batch brewery fermentation which involves the recycling (repitching) of a single yeast culture (slurry) over a number of fermentations (generations). Modern practices, such as the use of high-gravity worts and preparation of dried yeast for use as an inoculum, have increased the magnitude of the stresses to which the cell is subjected. The ability of yeast to respond effectively to these conditions is essential not only for beer production but also for maintaining the fermentation fitness of yeast for use in subsequent fermentations. During brewery handling, cells inhabit a complex environment and our understanding of stress responses under such conditions is limited. The advent of techniques capable of determining genomic and proteomic changes within the cell is likely vastly to improve our knowledge of yeast stress responses during industrial brewery handling.

Carbohydrate utilization and the lager yeast transcriptome during brewery fermentation.

The fermentable carbohydrate composition of wort and the manner in which it is utilized by yeast during brewery fermentation have a direct influence on fermentation efficiency and quality of the final product. In this study the response of a brewing yeast strain to changes in wort fermentable carbohydrate concentration and composition during full-scale (3275 hl) brewery fermentation was investigated by measuring transcriptome changes with the aid of oligonucleotide-based DNA arrays. Up to 74% of the detectable genes showed a significant (p

Bioethanol Production from Brewers Spent Grains Using a Fungal Consolidated Bioprocessing (CBP) Approach.

Production of bioethanol from brewers spent grains (BSG) using consolidated bioprocessing (CBP) is reported. Each CBP system consists of a primary filamentous fungal species, which secretes the enzymes required to deconstruct biomass, paired with a secondary yeast species to ferment liberated sugars to ethanol. Interestingly, although several pairings of fungi were investigated, the sake fermentation system (A. oryzae and S. cerevisiae NCYC479) was found to yield the highest concentrations of ethanol (37 g/L of ethanol within 10 days). On this basis, 1 t of BSG (dry weight) would yield 94 kg of ethanol using 36 hL of water in the process. QRT-PCR analysis of selected carbohydrate degrading (CAZy) genes expressed by A. oryzae in the BSG sake system showed that hemicellulose was deconstructed first, followed by cellulose. One drawback of the CBP approach is lower ethanol productivity rates; however, it requires low energy and water inputs, and hence is worthy of further investigation and optimisation.

Screening of Non- Saccharomyces cerevisiae Strains for Tolerance to Formic Acid in Bioethanol Fermentation.

Formic acid is one of the major inhibitory compounds present in hydrolysates derived from lignocellulosic materials, the presence of which can significantly hamper the efficiency of converting available sugars into bioethanol. This study investigated the potential for screening formic acid tolerance in non-Saccharomyces cerevisiae yeast strains, which could be used for the development of advanced generation bioethanol processes. Spot plate and phenotypic microarray methods were used to screen the formic acid tolerance of 7 non-Saccharomyces cerevisiae yeasts. S. kudriavzeii IFO1802 and S. arboricolus 2.3319 displayed a higher formic acid tolerance when compared to other strains in the study. Strain S. arboricolus 2.3319 was selected for further investigation due to its genetic variability among the Saccharomyces species as related to Saccharomyces cerevisiae and availability of two sibling strains: S. arboricolus 2.3317 and 2.3318 in the lab. The tolerance of S. arboricolus strains (2.3317, 2.3318 and 2.3319) to formic acid was further investigated by lab-scale fermentation analysis, and compared with S. cerevisiae NCYC2592. S. arboricolus 2.3319 demonstrated improved formic acid tolerance and a similar bioethanol synthesis capacity to S. cerevisiae NCYC2592, while S. arboricolus 2.3317 and 2.3318 exhibited an overall inferior performance. Metabolite analysis indicated that S. arboricolus strain 2.3319 accumulated comparatively high concentrations of glycerol and glycogen, which may have contributed to its ability to tolerate high levels of formic acid.

Tolerance of pentose utilising yeast to hydrogen peroxide-induced oxidative stress.

BACKGROUND: Bioethanol fermentations follow traditional beverage fermentations where the yeast is exposed to adverse conditions such as oxidative stress. Lignocellulosic bioethanol fermentations involve the conversion of pentose and hexose sugars into ethanol. Environmental stress conditions such as osmotic stress and ethanol stress may affect the fermentation performance; however, oxidative stress as a consequence of metabolic output can also occur. However, the effect of oxidative stress on yeast with pentose utilising capabilities has yet to be investigated. RESULTS: Assaying for the effect of hydrogen peroxide-induced oxidative stress on Candida, Pichia and Scheffersomyces spp. has demonstrated that these yeast tolerate hydrogen peroxide-induced oxidative stress in a manner consistent with that demonstrated by Saccharomyces cerevisiae. Pichia guillermondii appears to be more tolerant to hydrogen peroxide-induced oxidative stress when compared to Candida shehatae, Candida succiphila or Scheffersomyces stipitis. CONCLUSIONS: Sensitivity to hydrogen peroxide-induced oxidative stress increased in the presence of minimal media; however, addition of amino acids and nucleobases was observed to increase tolerance. In particular adenine increased tolerance and methionine reduced tolerance to hydrogen peroxide-induced oxidative stress.

The genetic basis of variation in clean lineages of Saccharomyces cerevisiae in response to stresses encountered during bioethanol fermentations.

Saccharomyces cerevisiae is the micro-organism of choice for the conversion of monomeric sugars into bioethanol. Industrial bioethanol fermentations are intrinsically stressful environments for yeast and the adaptive protective response varies between strain backgrounds. With the aim of identifying quantitative trait loci (QTL's) that regulate phenotypic variation, linkage analysis on six F1 crosses from four highly divergent clean lineages of S. cerevisiae was performed. Segregants from each cross were assessed for tolerance to a range of stresses encountered during industrial bioethanol fermentations. Tolerance levels within populations of F1 segregants to stress conditions differed and displayed transgressive variation. Linkage analysis resulted in the identification of QTL's for tolerance to weak acid and osmotic stress. We tested candidate genes within loci identified by QTL using reciprocal hemizygosity analysis to ascertain their contribution to the observed phenotypic variation; this approach validated a gene (COX20) for weak acid stress and a gene (RCK2) for osmotic stress. Hemizygous transformants with a sensitive phenotype carried a COX20 allele from a weak acid sensitive parent with an alteration in its protein coding compared with other S. cerevisiae strains. RCK2 alleles reveal peptide differences between parental strains and the importance of these changes is currently being ascertained.

Bio-oil and bio-char from low temperature pyrolysis of spent grains using activated alumina.

The pyrolysis of wheat and barley spent grains resulting from bio-ethanol and beer production respectively was investigated at temperatures between 460 and 540 °C using an activated alumina bed. The results showed that the bio-oil yield and quality depend principally on the applied temperature where pyrolysis at 460 °C leaves a bio-oil with lower nitrogen content in comparison with the original spent grains and low oxygen content. The viscosity profile of the spent grains indicated that activated alumina could promote liquefaction and prevent charring of the structure between 400 and 460 °C. The biochar contains about 10-12% of original carbon and 13-20% of starting nitrogen resulting very attractive as a soil amendment and for carbon sequestration. Overall, value can be added to the spent grains opening a new market in bio-fuel production without the needs of external energy. The bio-oil from spent grains could meet about 9% of the renewable obligation in the UK.

Rapid analysis of formic acid, acetic acid, and furfural in pretreated wheat straw hydrolysates and ethanol in a bioethanol fermentation using atmospheric pressure chemical ionisation mass spectrometry.

Atmospheric pressure chemical ionisation mass spectrometry (APCI-MS) offers advantages as a rapid analytical technique for the quantification of three biomass degradation products (acetic acid, formic acid and furfural) within pretreated wheat straw hydrolysates and the analysis of ethanol during fermentation. The data we obtained using APCI-MS correlated significantly with high-performance liquid chromatography analysis whilst offering the analyst minimal sample preparation and faster sample throughput.

The oxidative stress response of a lager brewing yeast strain during industrial propagation and fermentation.

Commercial brewing yeast strains are exposed to a number of potential stresses including oxidative stress. The aim of this investigation was to measure the physiological and transcriptional changes of yeast cells during full-scale industrial brewing processes with a view to determining the environmental factors influencing the cell's oxidative stress response. Cellular antioxidant levels and genome-wide transcriptional changes were monitored throughout an industrial propagation and fermentation. The greatest increase in cellular antioxidants and transcription of antioxidant-encoding genes occurred as the rapidly fermentable sugars glucose and fructose were depleted from the growth medium (wort) and the cell population entered the stationary phase. The data suggest that, contrary to expectation, the oxidative stress response is not influenced by changes in the dissolved oxygen concentration of wort but is initiated as part of a general stress response to growth-limiting conditions, even in the absence of oxygen. A mechanism is proposed to explain the changes in antioxidant response observed in yeast during anaerobic fermentation. The available data suggest that the yeast cell does not experience oxidative stress during industrial brewery handling. This information may be taken into consideration when setting parameters for industrial brewery fermentation.

Brewing yeast genomes and genome-wide expression and proteome profiling during fermentation.

The genome structure, ancestry and instability of the brewing yeast strains have received considerable attention. The hybrid nature of brewing lager yeast strains provides adaptive potential but yields genome instability which can adversely affect fermentation performance. The requirement to differentiate between production strains and assess master cultures for genomic instability has led to significant adoption of specialized molecular tool kits by the industry. Furthermore, the development of genome-wide transcriptional and protein expression technologies has generated significant interest from brewers. The opportunity presented to explore, and the concurrent requirement to understand both, the constraints and potential of their strains to generate existing and new products during fermentation is discussed.

The impact of brewing yeast cell age on fermentation performance, attenuation and flocculation.

Individual cells of the yeast Saccharomyces cerevisiae exhibit a finite replicative lifespan, which is widely believed to be a function of the number of divisions undertaken. As a consequence of ageing, yeast cells undergo constant modifications in terms of physiology, morphology and gene expression. Such characteristics play an important role in the performance of yeast during alcoholic beverage production, influencing sugar uptake, alcohol and flavour production and also the flocculation properties of the yeast strain. However, although yeast fermentation performance is strongly influenced by the condition of the yeast culture employed, until recently cell age has not been considered to be important to the process. In order to ascertain the effect of replicative cell age on fermentation performance, age synchronised populations of a lager strain were prepared using sedimentation through sucrose gradients. Each age fraction was analysed for the ability to utilise fermentable sugars and the capacity to flocculate. In addition cell wall properties associated with flocculation were determined for cells within each age fraction. Aged cells were observed to ferment more efficiently and at a higher rate than mixed aged or virgin cell cultures. Additionally, the flocculation potential and cell surface hydrophobicity of cells was observed to increase in conjunction with cell age. The mechanism of ageing and senescence in brewing yeast is a complex process, however here we demonstrate the impact of yeast cell ageing on fermentation performance.

Chitin scar breaks in aged Saccharomyces cerevisiae.

Ageing in budding yeast is not determined by chronological lifespan, but by the number of times an individual cell is capable of dividing, termed its replicative capacity. As cells age they are subject to characteristic cell surface changes. Saccharomyces cerevisiae reproduces asexually by budding and as a consequence of this process both mother and daughter cell retain chitinous scar tissue at the point of cytokinesis. Daughter cells exhibit a frail structure known as the birth scar, while mother cells display a more persistent bud scar. The number of bud scars present on the cell surface is directly related to the number of times a cell has divided and thus constitutes a biomarker for replicative cell age. It has been proposed that the birth scar may be subject to stretching caused by expansion of the daughter cell; however, no previous analysis of the effect of cell age on birth or bud scar size has been reported. This paper provides evidence that scar tissue expands with the cell during growth. It is postulated that symmetrically arranged breaks in the bud scar allow these rigid chitinous structures to expand without compromising cellular integrity.

Chronological and replicative lifespan of polyploid Saccharomyces cerevisiae (syn. S. pastorianus).

Chronological lifespan may be defined as the result of accumulation of irreversible damage to intracellular components during extended stationary phase, compromising cellular integrity and leading to death and autolysis. In contrast, replicative lifespan relates to the number of divisions an individual cell has undertaken before entering a non-replicative state termed senescence, leading to cell death and autolysis. Both forms of lifespan have been considered to represent models of ageing in higher eukaryotes, yet the relation between chronologically and replicatively aged populations has not been investigated. In this study both forms of lifespan have been investigated in Saccharomyces cerevisiae (Syn. S. pastorianus) to establish the relationship between chronological and replicative ageing.