Biochar dispersion in a tropical soil and its effects on native soil organic carbon.

Although biochar application to soils has been found to increase soil quality and crop yield, the biochar dispersion extent and its impacts on native soil organic carbon (SOC) has received relatively little attention. Here, the vertical and lateral migration of fine, intermediate and coarse-sized biochar (<0.5, 0.5-1 and 1-5 mm, respectively), applied at low and high doses (1.5-2 and 3-4% w/w, respectively), was tracked using stable isotope methods, along with its impact on native SOC stocks. Biochar was homogeneously mixed into the surface layer (0-7 cm depth) of a loamy sandy Acrisol in Zambia. After 4.5 y, 38-75% of the biochar carbon (BC) was lost from the applied layer and 4-25% was detected in lower soil layers (7-30 cm). Estimating BC mineralization to be no more than 8%, 25-60% was likely transported laterally out of the experimental plots. This conclusion was supported by observations of BC in the control plot and in soils up to 2 m outside of the experimental plots. These processes were likely progressive as recovery of BC in similar plots 1 year after application was greater in both surface and lower soil layers than after 4.5 y. Fine and intermediate-sized BC displayed the greatest downward migration (25.3 and 17.9%, respectively), particularly when applied at lower doses, suggesting its movement through soil inter-particle spaces. At higher dosages, fine and intermediate-sized particles may have clogged pore, so coarse biochar displayed the greatest downward migration when biochar was applied at higher doses. In the BC treatment plot soil profiles, native SOC stocks were reduced by 2.8 to 24.5% (18.4% on average), i.e. positive priming. However, some evidence suggested that the soils may switch to negative priming over time. The dispersion of biochar in soil should be considered when evaluating biochar's agronomic benefits and environmental effects.

Industrial byproducts for the soil stabilization of trace elements and per- and polyfluorinated alkyl substances (PFASs).

The present work was the first exploration of the use of industrial byproducts from iron and titanium processing as sorbents for the stabilization of soil contamination. The main aim was to test slag waste and iron-rich charred fossil coal ("Fe-char"), as sorbents for per- and polyfluorinated alkyl substances (PFASs), as well as lead (Pb) and antimony (Sb), in four soils from a firefighting training area (PFASs) and a shooting range (Pb and Sb). Adding slag (10-20%) to shooting range soils decreased the leaching of Pb and Sb up to 50-90%. Fe-char amendment to these soils resulted in a moderate reduction in Sb leaching (20-70%) and a slightly stronger effect on Pb (40-50%). The sorption is most likely explained by the presence of Fe oxyhydroxides. These are present in the highest concentrations in the slag, probably resulting in more effective metal binding to the slag than to the Fe-char. Fe-char but not slag proved to be a strong sorbent for PFASs (reducing PFAS leaching from the soil by up to 99.7%) in soil containing low total organic carbon (TOC; 1.2%) but not in high-TOC soil (34%). The sorption coefficient KD for Fe-char was high, in the range of 104.3 to 106.5 L/kg at 1 ng/L in the low-TOC soil. The KD value increased with increasing perfluorocarbon chain length, exceeding PFAS sorption to biochar in the low ng/L concentration range. This result indicates that the mechanism behind the strong PFAS sorption to Fe-char was mainly van der Waals dispersive interactions between the hydrophobic PFAS-chain and the aromatic π-electron systems on nanopore walls within the Fe-char matrix. Overall, this study indicates that industrial byproducts can provide sustainable and cost-effective materials for soil remediation. However, the sorbent needs to be tailored to the type of soil and type of contamination.

From landfills to landscapes-Nature-based solutions for water management taking into account legacy contamination.

Nature-based solutions (NBS) can be used in combination with the reopening of piped rivers to support area development. In certain cases, piped rivers can run through disused landfills. This presents a complicating factor because landfills provide the possibility for river water to be contaminated by waste. In Skien municipality, close to Oslo, Norway, NBS are being considered as part of a potential reopening of the Kjørbekk stream. A 4-km stretch of the stream is contained in an aging pipe infrastructure that is buried under two disused landfills. The pipe infrastructure does not have the physical capacity to cope with an increase in precipitation brought about by current climate change, and in certain areas, the pipe has started to leak. This means that surface water runoff that cannot be accommodated by the pipe, as well as water that leaks from the pipe, can become contaminated by the waste in the disused landfill. Furthermore, the water can be transported with the stream course to the final recipient, taking the contamination with it. Reopening the stream and providing new water pathways can alleviate these problems, but it must be carried out so that contamination is not allowed to spread. This case study reveals how certain NBS that focus on reducing the amount of water in contact with pollutants, reducing the amount of particle spreading, remediating contaminated water, and remediating contaminated soil could be implemented at the site and function as a catalyst for an incremental city development. Integr Environ Assess Manag 2022;18:99-107. © 2021 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Waste timber pyrolysis in a medium-scale unit: Emission budgets and biochar quality.

Pyrolysis of organic waste or woody materials yields a stable carbonaceous product that can be mixed into soil and is often termed "biochar". During pyrolysis carbon-containing gases are emitted, mainly volatile organic carbon species, carbon monoxide and aerosols. In modern pyrolysis units, gases are after-combusted, which reduces emissions substantially. However, emission data for medium- to large-scale pyrolysis units are scant, both regarding gases, aerosols, heavy metals and polycyclic aromatic hydrocarbons (PAH). Making biochar from lightly contaminated waste timber (WT) is a promising waste handling option as it results in the potential valorization of such residues into e.g. sorbents for contaminant stabilization. For this process to be environmentally sustainable, emissions during the process need to be low and the resulting biochar of sufficient quality. To investigate both issues, we pyrolyzed three batches of WT and one reference batch of clean wood/leaves in a representative medium-scale pyrolysis unit (Pyreg-500, 750 t/year) with after-combustion of the pyrolysis gases, and measured the gas, aerosol, metal and PAH emissions, as well as the characteristics and contamination levels of the resulting biochar, including contaminant leaching. Mean emission factors for the WT were (g/kg biochar); CO = 7 ±â€¯2, non-methane volatile organic compounds (NMVOC) = 0.86 ±â€¯0.14, CH4 = 0, aerosols (PM10) = 0.6 ±â€¯0.3, total products of incomplete combustion (PIC) = 9 ±â€¯3, PAH-16 = (2.0 ±â€¯0.2) ·â€¯10-5, As (most abundant metal) = (2.3 ±â€¯1.9) ·â€¯10-3 and NOX = 0.65 ±â€¯0.10. There were no significant differences in emission factors between the pyrolysis of WT and the reference respectively, except for PM10, NMVOC, and PAH-16, which were significantly lower for WT than for the clean wood/leaves. The WT biochar did not satisfy premium or basic European Biochar Certificate criteria due to high levels of zinc and PAH. However, leachable metal contents were <0.1% of total contents. Still, use of the WT-biochar without further improvement or investigation would be limited to ex situ use, not improving soil fertility or in situ remediation.

Can biochar and designer biochar be used to remediate per- and polyfluorinated alkyl substances (PFAS) and lead and antimony contaminated soils?

Designer biochars can be used to remediate organic and inorganic contaminant polluted soils. Here, a waste timber biochar (BC), a coconut shell activated biochar (aBC) and a wood shrub iron enriched designer biochar (Fe-BC) were investigated. Per- and polyfluorinated alkyl substances (PFAS) contaminated soils with different total organic carbon (TOC) contents (1.6 and 34.2%) were amended with six doses of BC and aBC. Two shooting range soils (TOC 5.2 and 10.2%) contaminated with heavy metals (mainly Pb and Sb) were amended with four doses of BC and Fe-BC. An amendment of 20% BC reduced the PFOS leachate concentration by 86% for the low TOC soil but was not effective for the high TOC soil. An amendment of 1% aBC reduced PFOS leachate concentrations by over >96% for both soils. For the low TOC shooting range soil, a 20% amendment of BC reduced Pb and Sb leaching by 61% and 12%, respectively. An amendment of 20% Fe-BC to soil with low TOC reduced Pb and Sb leaching by 99% and 40%, respectively. The need for "designer" biochars using processes such as iron enrichment or activation should be considered depending on the TOC of the soil, the type of contaminants and remediation goals.

Biochar amendment to soil changes dissolved organic matter content and composition.

Amendments of biochar, a product of pyrolysis of biomass, have been shown to increase fertility of acidic soils by enhancing soil properties such as pH, cation-exchange-capacity and water-holding-capacity. These parameters are important in the context of natural organic matter contained in soils, of which dissolved organic matter (DOM) is the mobile and most bioavailable fraction. The effect of biochar on the content and composition of DOM in soils has received little research attention. This study focuses on the effects of amendments of two different biochars to an acidic acrisol and a pH-neutral brown soil. A batch experiment showed that mixing biochar with the acrisols at a 10 wt.% dose increased the pH from 4.9 to 8.7, and this resulted in a 15-fold increase in the dissolved organic carbon concentration (from 4.5 to 69 mg L(-1)). The pH-increase followed the same trend as the release of DOM in the experiment, causing higher DOM solubility and desorption of DOM from mineral sites. The binding to biochar of several well-characterised reference DOM materials was also investigated and results showed a higher sorption of aliphatic DOM to biochar than aromatic DOM, with DOM-water partitioning coefficients (Kd-values) ranging from 0.2 to 590 L kg(-1). A size exclusion occurring in biochar's micropores, could result in a higher sorption of smaller aliphatic DOM molecules than larger aromatic ones. These findings indicate that biochar could increase the leaching of DOM from soil, as well as change the DOM composition towards molecules with a larger size and higher aromaticity.