Boosting Thermoelectric Performance of PbBi2Te4 via Reduced Carrier Scattering and Intensified Phonon Scattering.

Materials with low intrinsic lattice thermal conductivity are crucial in the pursuit of high-performance thermoelectric (TE) materials. Here, the TE properties of PbBi2Te4-xSex (0 ≤ x ≤ 0.6) samples are systematically investigated for the first time. Doping with Se in PbBi2Te4 can simultaneously reduce carrier concentration and increase carrier mobility. The Seebeck coefficient is significantly increased by doping with Se, based on the density functional theory calculation, it is shown to be due to the increased bandgap and electronic density of states. In addition, the lattice strain is enhanced due to the difference in the size of Se and Te atoms, and the multidimensional defects formed by Se doping, such as vacancies, dislocations, and grain boundaries, enhance the phonon scattering and reduce the lattice thermal conductivity by about 37%. Finally, by using Se doping to reduce carrier concentration and thermal conductivity, a large ZTmax = 0.56 (at 574K) is achieved for PbBi2Te3.5Se0.5, which is around 64% larger than those of the PbBi2Te4 pristine sample. This work not only demonstrates that PbBi2Te4 is a potential medium temperature thermoelectric material, but also provides a reference for enhancing thermoelectric properties through defect and energy band engineering.

Attaining High Figure of Merit in the N-Type Bi2Te2.7Se0.3-Ag2Te Composite System via Comprehensive Regulation of Its Thermoelectric Properties.

n-Type Bi2Te2.7Se0.3 (BTS) is the state-of-the-art thermoelectric material near room temperature. However, the figure of merit ZT of commercial BTS ingots is still limited and further improvement is imperative for their wide applications. Here, the results show that through dispersion of the Ag2Te nanophase in BTS, one can not only elevate its power factor (PF) by as high as 14% (at 300 K) but also reduce its thermal conductivity κtot to as small as ∼29% (at 300 K). Experimental evidences show that the improved PF comes from both increased electron mobility via inhibited Te vacancies and enhanced thermopower due to energy filtering effect, while the reduction of κtot originates from the drop of both electronic thermal conductivity largely owing to the reduced number of vacancy VTe·· and intensified phonon scattering chiefly from the dispersed Ag2Te nanophase. Consequently, the largest ZTmax = 1.31 (at 350 K) and average ZTave = 1.16 (300-500 K) are achieved for the Bi2Te2.7Se0.3-0.3 wt % Ag2Te composite sample, leading to a projected conversion efficiency η = 8.3% (300-500 K). The present results demonstrate that incorporation of nanophase Ag2Te is an effective approach to boosting the thermoelectric performance of BTS.

Achieving High Thermoelectric Performance in p-Type BST/PbSe Nanocomposites through the Scattering Engineering Strategy.

To achieve high thermoelectric conversion efficiency in Bi0.4Sb1.6Te3 (BST) alloy is vital for its applications in low-grade energy harvesting. Here, we show that 56% increase in the power factor (PF) (from 16 to 25 µW cm-1 K-2) and 32% reduction of lattice thermal conductivity κL (from 0.56 to 0.38 W m-1 K-1) as well as an approximately four-fold decrease in bipolar-effect contribution κb (from 0.48 to 0.12 W m-1 K-1) can be achieved at 512 K through the incorporation of 0.2 vol % PbSe nanoparticles in the BST matrix. Analyses indicate that the remarkable increase in PF for the composite samples can be mainly attributed to strong electron scattering at the large interface barriers, inhibiting effectively the electron contribution to the total thermopower at elevated temperatures, while the large drop of κL and κb originates from enhanced phonon scattering by PbSe nanoinclusions as well as phase boundaries (among BST and PbSe nanophase) and suppression of electron transport, respectively. As a result, a maximum figure of merit (ZT) of 1.56 (at 400 K) and an average ZT (ZTave) of 1.44 in the temperature range of 300-512 K are reached. Correspondingly, a record projected conversion efficiency η = 11% is achieved at the cold side 300 K and hot side 512 K in the BST-based composite incorporated with 0.2 vol % PbSe nanoinclusions.

Ultralow Thermal Conductivity and High Thermoelectric Performance of N-type Bi2Te2.7Se0.3-Based Composites Incorporated with GaAs Nanoinclusions.

Bi2Te2.7Se0.3 (BTS) is known to be the unique n-type commercial thermoelectric (TE) alloy used at room temperatures, but its figure of merit (ZT) is relatively low, and it is vital to improve its ZT for its wide applications. Here, we show that incorporation of an appropriate amount of GaAs nanoparticles in BTS not only causes the large enhancement of Seebeck coefficients because of energy-dependent carrier scattering, but also gives rise to drastic reduction of lattice thermal conductivity κL. Specifically, ultralow κL ∼ 0.27W m-1 K-1 (at 300 K) is achieved for the composite sample incorporated with a 0.3 wt % GaAs nanophase, which is proved to originate mainly from the intensified phonon scattering by the GaAs nanoinclusions and interfaces between the GaAs and BTS matrix. As a result, a maximum ZT = 1.19 (∼372 K) and an average ZTave = 1.01 (at T = 300-550 K) are reached in the composite sample with 0.3 wt % GaAs nanoinclusions, which are respectively ∼78% and ∼82% larger than those of the BTS matrix in this study, demonstrating that incorporation of the GaAs nanophase is an effective way to improve TE performance of BTS.

Design of Domain Structure and Realization of Ultralow Thermal Conductivity for Record-High Thermoelectric Performance in Chalcopyrite.

Chalcopyrite compound CuGaTe2 is the focus of much research interest due to its high power factor. However, its high intrinsic lattice thermal conductivity seriously impedes the promotion of its thermoelectric performance. Here, it is shown that through alloying of isoelectronic elements In and Ag in CuGaTe2 , a quinary alloy compound system Cu1- x Agx Ga0.4 In0.6 Te2 (0 ≤ x ≤ 0.4) with complex nanosized strain domain structure is prepared. Due to strong phonon scattering mainly by this domain structure, thermal conductivity (at 300 K) drops from 6.1 W m-1 K-1 for the host compound to 1.5 W m-1 K-1 for the sample with x = 0.4. As a result, the optimized chalcopyrite sample Cu0.7 Ag0.3 Ga0.4 In0.6 Te2 presents an outstanding performance, with record-high figure of merit (ZT) reaching 1.64 (at 873 K) and average ZT reaching 0.73 (between ≈300 and 873 K), which are ≈37 and ≈35% larger than the corresponding values for pristine CuGaTe2 , respectively, demonstrating that such domain structure arising from isoelectronic multielement alloying in chalcopyrite compound can effectively suppress its thermal conductivity and elevate its thermoelectric performance remarkably.

Co-precipitation synthesis of nanostructured Cu3SbSe4 and its Sn-doped sample with high thermoelectric performance.

Large-scale fabrication of nanostructured Cu3SbSe4 and its Sn-doped sample Cu3Sb0.98Sn0.02Se4 through a low-temperature co-precipitation route is reported. The effects of hot-pressing temperatures, time and Sn doping on the thermoelectric properties of Cu3SbSe4 are explored. The maximum figure of merit ZTmax obtained here reaches 0.62 for the un-doped Cu3SbSe4, which is three times as large as that of Cu3SbSe4 synthesized by the fusion method. Due to the ameliorated power factor by optimized carrier concentration and the reduced lattice thermal conductivity by enhanced phonon scattering at grain interfaces, Sn doping leads to an improvement of thermoelectric performance as compared to Cu3SbSe4. The maximum ZT for Cu3Sb0.98Sn0.02Se4 is 1.05 in this work, which is 50% larger than the largest value reported.