ABSTRACT
We investigated the use of crystalline coatings as the highly reflective coating of an Yb:YAG thin disk directly bonded onto a silicon carbide heatsink. Compared to commonly used ion-beam-sputtered coatings, it possesses lower optical losses and higher thermal conductivity, resulting in better heat management and laser outputs. We pumped the disk up to 1.15 kW at 969 nm and reached 665 W of average output power, and disk temperature of 107 °C with a highly multi-modal V-cavity. These promising results were reached with this novel design despite the adoption of a cheap silicon carbide substrate having more than 3 times lower thermal conductivity compared to frequently used CVD diamond.
ABSTRACT
We report on the characterization of a high-power, chirped volume Bragg grating (CVBG) pulse compressor. It includes measurements of the CVBG's diffraction efficiency, beam profile, beam quality (M2 parameter), pulse spectrum, the CVBG's temperature, and the thermal lens. These parameters were monitored for a wide range of input laser powers and with different clamping forces applied on the CVBG. This analysis was performed with a CPA-based Yb:YAG thin-disk laser system operating at a wavelength of 1030 nm, a 92 kHz repetition rate, 2 ps pulse duration, and an average output power after compression of 216 W (270 W uncompressed), which is, to the best of our knowledge, the highest value reported to date using this pulse compression technique.